BOQ FOR WATERPROOFING AMC CONTRACT

SL NO ITEM DESCRIPTION
1 DISMANTLING & REPAIR WORKS
1.1 DISMANTLING RCC/CEMENT CONCRETE Dismantling RCC/cement concrete manually/ by
mechanical means including disposal of material within 2km lead as per direction of Engineer - in -
charge.
1.2 DISMANTLING OLD PLASTER Dismantling old plaster or skirting raking out joints and cleaning the
surface for plaster including disposal of rubbish to the dumping ground within 2km lead as per
direction of Engineer - in- charge.
1.3 REMOVING VEGETATION FROM CONCRETE STRUCTURE Removing vegetation by uprooting
stumps and disposal of rubbish including chipping and cleaning the area, applying two coat of epoxy
bonding agent, filling the area with high strength microconcrete, including cost of all materials,
scaffolding, conveyance , royalties and taxes, loading and unloading, labour,sundries, T&P
etc.completed as direction of Engineer In Charge. complete at all levels and locations and as directed.
Make: Bonding Agent - Nitobond EP, Micro Concrete - Renderoc LAXtra.
1.4 REPAIR OF UNSOUND/WEAK CONCRETE Chipping of unsound/weak concrete in surface of
concrete structure 40- 75mm thick with manual Chisel and/ or by standard power-driven percussion
type or of approved make including tapering of all edges, making square shoulders of cavities including
cleaning the exposed concrete surface and reinforcement with wire brushes/ oil free pressure air and
disposal of debris, applying two coat of anticorrosive primer in reinforcement, applying two coat of
epoxy bonding agent, filling the area with high strength micro concrete. including the cost of all
materials, scaffolding, conveyance, royalties and taxes, loading and unloading, labour, sundries, T&P
etc.completed as the direction of Engineer In Charge. complete at all levels and locations and as
directed. Make: NitoZinc Primer, NitoBond EP, Renderoc LAXtra or Equivalent.

2 NEW DEVELOPMENT WORKS

2.1 EXCAVATION Earthwork in excavation at all depths for foundation, drain, ramp,pits, etc., in all kind of
soils including the area filled up with soil, in both Dry and Wet conditions, including Pumping and
Bailing out Surface and Subsoil water, rain water by using any suitable dewatering method, Shoring,
Strutting, Slush removal, sorting out the excavated earth into serviceable and unserviceable
material,including backfilling in all positions, in layers of 150mm at all heights and depths as per
Drawing and Specifications wherever required , in foundation pits and other places. The cost include
transportation of both unserviceable/serviceable material into dumping yards or wherever required as
per direction of Engineer incharge upto any lead within plant boundary,spreading in layers of thickness
not more than 200mm, as per specifications and direction of Engineer.

2.2 PLAIN CEMENT CONCRETE 1:3:6 Supplying and Laying Plain Cement Concrete of Grade 1:3:6 with
stone aggregate of 40mm down size (including centering & shuttering if required) and with cement of
approved make as specified in all levelling courses under Foundation, Floors,rigid pavement,
Pits,trenches etc., at all heights / depths and floors including all materials, Manpowers, Machinery,
curing, scaffolding, complete as per Drawings/Specifications and direction of Engineer in charge.
Minimum cement content - 225kg/cum.
2.3 REINFORCED CEMENT CONCRETE - DESIGN MIX M30 Providing and laying in position Reinforced
Cement Concrete in Design mix of M-30 Grade; using Portland Pozzalana Cement (PPC) confirming
to IS 1489 part -II ; with river sand(Zone I/II) and 20mm and down graded hard stone broken stone
(minimum cement Content 400kg/cum), including supplying and mixing Super- Plasticizer of approved
brand/conforming to relevant IS Standard; including placing of concrete,providing pockets,openings,
recesses, chamfering wherever required etc., vibrating, tamping, curing and rendering if required. to
give a smooth and even surface etc. all complete (excluding the cost of reinforcement) for all
structures ( confirming to IS 456 ) as per the drawings, specifications and as directed by Engineering
incharge.

_x000D_ Sensitivity: Internal (C3)

#
2.4 REINFORCEMENT BAR FE 500D CRS Supply, fabrication, hoisting and placing in position HYSD
Ribbed Tor Steel (FE 500 D grade) CRS bars (RNIL/SAIL or equivalent make) ranging from 8mm to
32mm conforming to IS 1786 - Latest Edition as per detailed drawing and specifications including
straightening cutting, bending and tying with soft 18 gauge (1.22m dia) annealed binding wire
complete .The rates shall be applicable for all heights and depths, transportation to site etc. as directed
by the Engineer-in-charge complete to include all labour and materials Payment shall be made as per
reinforcement drawings and with theoretical weights only including all authorised laps and hooks.
Weight of binding wires shall not be considered for measurement.

2.5 CENTERING AND SHUTTERING Centering and shuttering (Steel/Ply) for all structure including
strutting, propping etc. and removal of form after the required interval from the date of casting
including cost of all labours, materials, conveyance, loading and unloading, all taxes and royalties,
sundries and T&P etc all complete as per direction of the Engineer -in-charge.
2.6 EPOXY BONDING ADHESIVE Providing, mixing and applying bonding coat of approved adhesive on
chipped portion of RCC as per specifications including Cleaning of exposed concrete surface of
sticking loose and foreign material cleaning with oil free air blast as per direction of Engineer in charge.
Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make
2.7 DRILLING HOLES FOR REINFORCEMENT Drilling suitable holes in reinforced or plain cement
concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams,
lintels, columns and slabs to introduce steel bars for Wall/sunshades/balconies including fixing the
steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of
reinforcement, all complete as per direction of Engineer-In- Charge.A) Upto and including 16mm dia.
2.8 CORE CUTTER Drilling with core cutting machine in RCC slabs, walls etc.wherever required in
buildings, manholes,ducts etc. for laying/fixing pipes, and making good the same to give an even
finish. The rate shall include the cost of drilling core, providing water proofing compound for sealing the
joints around the pipes, nominal reinforcement wherever required, scaffolding and labour charges for
working at all levels, leads and heights. (Thickness of RCC members may be varry from 50mm to
1000mm) and as directed by Engineer-In-Charge. (Core Dia varrying from 20mm to 100mm)
2.9 CORE CUTTER Drilling with core cutting machine in RCC slabs, walls etc.wherever required in
buildings, manholes,ducts etc. for laying/fixing pipes, and making good the same to give an even
finish. The rate shall include the cost of drilling core, providing water proofing compound for sealing the
joints around the pipes, nominal reinforcement wherever required, scaffolding and labour charges for
working at all levels, leads and heights. (Thickness of RCC members may be varry from 50mm to
1000mm) and as directed by Engineer-In-Charge. (Core Dia varrying from 100mm to 150mm)
2.1O BRICK WORK BELOW PLINTH Construction of Brick work in below plinth using fly ash bricks of size
230x110x75 mm thick with minimum compressive strength of 75 kg/sqcm in cement mortar (1:4)
including curing and watering including cost of bricks and all materials, scaffolding, conveyance ,
royalties and taxes, loading and unloading, labour,sundries, T&P etc.completed as direction of
Engineer In Charge.
2.11 CEMENT PLASTERING(1:5) 12mm THICK Providing 12 mm thick cement plaster 1:5 ( 1 cement: 5
fine sand) finished including all materials and manpowers, cleaning, hacking of base surfaces,
providing scaffolding,watering and curing, finishing etc. all complete for all heights as per specifications
and directions of Engineer in Charge. No extra payment shall be made for additional thickness if
required to achieve perfect line and level.
2.12 CPVC PIPE 25mm DIA Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 25mm dia pipes
conforming to IS 15778 Class 1 SDR11 upto 50mm & Class 3 SDR17 above 50mm,having thermal
stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing
the pipe with clamps at 1.00 m spacing. including cutting walls & floor & making good the damages,
This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints
complete as per direction of Engineer in Charge.

_x000D_ Sensitivity: Internal (C3)

#
2.13 UPVC PIPE 110mm DIA Supplying all materials, labour, taxes, T & P and fitting & fixing UPVC SWR
pipes of approved make conforming to IS-13592 Type B, both below & above ground level/floor & on
walls including Fittings (ie. Floor traps, Junction, coupler, Tee, Reducer as per site requirement)
conforming to IS 14735, supply of bobbins, nails, screws, wooden cleats, pvc clamps, pipe clip as per
requirement, including earth work in excavation & fitting, including cutting walls & floor & making good
the damages with cement concrete (1:2:4) with hard granite chips, including scaffolding wherever
necessary, including all cost of labour, material all complete as per direction of the Engineer-in -
charge. 110mm dia

2.14 JET PUMP fixing & Commissioning of 2HP deep well Pump with constant pressure water supply of
average discharge pressure comprising of horizontal or vertical mounted, single outlet.. Pump having a
suction lift head 90m head & delivery size 50mm with cast iron casing, stainless steel or Bronze
impeller and shaft and electric motor operating on Single phase, AL supply of 180-240V. The pumps to
be installed in the pump room or under small sheds. Each Pump shall be controlled with Auto switch
connected to the controlled panel. Necessary cabling for Power and control having a total length of
about 50 Rmt shall be laid for auto control. The installation shall include suction pipe from the pump to
the water tank. This suction pipe, shall be fitted to the foot valve. They will be one size higher than the
pipe suction diameter. The quoted price shall be inclusive of the Foot Valve, Suction pipe, Installation
of pump, Suction valve and strainer and discharge NRV and valve and Pressure Vessels. There shall
be separates Electrical Feeder provided for each pump. The starter electrical panel with all protection
and Amp Meter / Volt Meter / Auto Manual selector shall be in the scope of the supplier. Complete as
per direction of Engineer In Charge. Make: Kirloskar or Equivalent

3 INJECTION GROUTING & EXPANSION JOINT WORKS

3.1 EPOXY GROUT INJECTION Providing epoxy low viscos pressure grouting by using "Masterinject
1315" epoxy grout material or its equivalent approved quality material like "Sika", "Fosroc" or "BASF"
make, pressure grouting shall be done with heavy pressure pump by injecting the epoxy materials in
sealed nozzles or metal packers for strengthening of concrete or arresting the leakage, seepage water
by epoxy injection gun at grouting pressure range minimum about 4 Kg / cm2 as per requirement
including all pumping system & machinery by providing low viscous water insensitive epoxy grout of
approved manufacturer’s specifications and injecting till the refusal by allowing properly setting &
sealing the nozzles without wasting the injecting materials and making the system complete safe /
water tight as required etc. complete as directed. Payment shall be made per Kg. of material net
utilized during the grouting operation. Wastage of material will not be considered for the payment.
including cost of all materials, cleaning of base surfaces, providing scaffolding, watering and curing,
finishing etc. all complete for all heights as per specifications and directions of Engineer in Charge

3.2 WATERTIGHT SEALING GROUT INJECTION Providing low viscous, elastic PU grouting by using
"Sika Injection 201CE" grout material or its equivalent approved quality material like "Sika", "Fosroc" or
"BASF" make, pressure grouting shall be done with heavy pressure pump by injecting the grout
materials in sealed nozzles or metal packers for strengthening of concrete or arresting the leakage,
seepage water by grout injection gun at grouting pressure range minimum about 4 Kg / cm2 or as per
manufacture specification including all pumping system & machinery by providing low viscous water
insensitive grout of approved manufacturer’s specifications and injecting till the refusal by allowing
properly setting & sealing the nozzles without wasting the injecting materials and making the system
complete safe / water tight as required etc. complete as directed. Payment shall be made per Kg. of
material net utilized during the grouting operation. Wastage of material will not be considered for the
payment. including cost of all materials, cleaning of base surfaces, providing scaffolding, watering and
curing, finishing etc. all complete for all heights as per specifications and directions of Engineer in
Charge

3.4 SEALANT FOR EXPANSION JOINTS Providing and laying polysulphide sealant for expansion joints of
approved make Including chipping upto required depth, cleaining, surface preparation, applying primer
with approved make, backer rod, sealant with approved make, curing make as per drawing,
manufacturer specification to give water tightness, etc. including cost of all materials, cleaning of base
surfaces, providing scaffolding, watering and curing, finishing etc. all complete for all heights as per
specifications and directions of Engineer. Make: Sika PolySulphide Gun Grade.

_x000D_ Sensitivity: Internal (C3)

#
 4 CONCRETE STRUCTURE WATERPROOFING
4.1 SCREED CONCRETE 1:1.5:3 Providing & Laying of Screed concrete on roof of 1:1.5:3 ratio with 2%
integral waterproofing compound and making 1% slope, finished with a floating coat of neat cement,
including hunching 5x5 cm with (45º) to the edge of roof screed and parapet cement slurry, curing and
watering, Nosing, making 600mmx600mm grid line. including cost of all materials, conveyance ,
royalties and taxes, loading and unloading, labour,sundries, T&P etc.completed as direction of
Engineer In Charge. Avg 50 mm thick with 12.5 mm nominal size stone aggregate
4.2 CEMENT PLASTER (1:4) - 16mm THICK Providing 16 mm thick cement plaster 1:4 ratio admixed with
integral waterproofing compound finished including all materials and manpower, cleaning, hacking of
base surfaces, providing scaffolding, watering and curing, finishing etc. all complete for all heights as
per specifications and direction of Engineer in Charge. No extra payment shall be made for additional
thickness if required to achieve perfect line and level.
4.3 WATER PROOFING TREATMENT ON ROOF Providing and laying integral cement based water
proofing treatment including preparation of surface as required for treatment of roofs, terraces etc
consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of
cement admixed with 2% water proofing compound conforming to IS. 2645 over the RCC slab
including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b)
laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth
should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @
1.289 kg/sqm mixed with 2% water proofing cement compound @ 0.670 kg/sqm and coarse sand @
1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. (d)
Fourth and layer of Avg.50mm thick Screed concrete (1:1.5:3). including cost of all materials,
conveyance , royalties and taxes, loading and unloading, labour,sundries, T&P etc.completed as
direction of Engineer In Charge. (Screed Concrete shall be paid separately.)

4.4 WATER PROOFING TREATMENT ON SUNKEN AREA Providing and laying integral cement based
water proofing treatment in sunken portion of WCs, bathroom etc., including preparation of surface as
required for treatment of roofs, terraces etc consisting of following operations:_x000D_
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with 2% water proofing
compound conforming to IS. 2645 over the RCC slab including adjoining walls upto 300 mm height
including cleaning the surface before treatment. (b) Second layer of 1.5 mm thickness consisting of
slurry of cement @ 1.289 kg/sqm mixed with 2% water proofing cement compound @ 0.670 kg/sqm
and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing
for 48 hours. Including treatment and sealing of all joints, corners, junctions of pipes and masonry.
The rate include cost of all materials, labour conveyance , royalties and taxes, loading and unloading,
labour,sundries, T&P etc.completed as direction of Engineer In Charge.

4.5 WATER PROOFING TREATMENT BY CRYSTALLINE SLURRY Providing and applying integral
crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining
walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant,
tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral
crystalline slurry : 2 parts water) for vertical/Horizontal surfaces and applying the same from negative
(internal) side with the help of synthetic fiber brush. The material shall meet the requirements as
specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared
with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side.
The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall
be carried out all complete as per specification and the direction of the engineer-in-charge. The
product performance shall carry guaranteed for 10 years against any leakage.

4.6 WATERPROOFING BY APP MEMBERANE : PROVIDING AND APPLYING OF BITUMEN FELT

BASED MEMBRANE ,THICKNESS: 4 MM, HIGH MOLECULAR HIGH DENSITY POLYETHYLENE
FILM INCLUDING COATING THE SURFACE WITH COMPATIBLE PRIMER/COLD STICKER/BLOWN
BITUMEN (CONFORMING TO IS 3384) AT AS PER REQUIREMENT including cost of all
materials,labours,taxes & royalties, conveyance ,loading and unloading ,sundries ,T & P etc.The work
shall be carried out all complete as per manufacture specification and the direction of the engineer-in-
charge.

_x000D_ Sensitivity: Internal (C3)

#
 4.7 WATERPROOFING BY POLYURETHANE Providing and laying single component, liquid applied
polyurethane based, elastomeric waterproofing coating on concrete(Old & New) applied two coat of
waterproofing component on primed surface and spread with a roller/brush at max consumption of 1.0
kg/Sqm per coat over one coat of suitable prime, Before the surface application, all detail areas and
any singular points like wall-floor connections, chimneys, joints, substrate cracks, penetrations,
corners, etc., must be treated by apply one layer of waterproofing component, then place a correct cut
stripe of geotextile mat (110g/m²) into the wet material. including Cleaning of exposed concrete surface
of sticking loose and foreign material cleaning with oil free air blast as, including cost of all
materials,labours,taxes & royalties, conveyance ,loading and unloading, scaffolding, sundries ,T & P
etc.The work shall be carried out all complete as per manufacture specification and the direction of the
engineer-in-charge. Make: BASF Masterseal M635 or equivalent approved make.

5 STEEL STRUCTURE PROTECTIVE COATING

5.1 REPAIR IN STEEL WORKS Repair of steel structure work of Trusses, Column, Beams, purlins, girders, brackets,
etc. with connections using plates, channels and angles, gusset plate, foundation bolt, cleats, fasteners etc.
according with the approved procedures/drawings, steel grade conforming to execution/Existing drawing.The rate
of steel repair work shall include assembly, welding, jointing, building up new sections, cost of fasteners (nuts,
bolts and washers) etc. including all temporary staging and supporting work, one coat zinc rich primer & two coat of
Synthetic enamel paint of approved shade after properly cleaning the steel surface, complete all as per drawings,
specifications etc. with all lead & lift for all materials & labour and as direction of the Engineer in Incharge at all
heights & locations.

5.3 SURFACE PREPARATION FOR PAINTING (STEEL WORKS) Surface preparation of steel structure to achieve
ST3 by hand tools (wire brushing, chipping, scraping and sanding, etc.) and/or power tools (power sanders or wire
brushes, power chipping hammers, abrasive grinding wheels, needle guns etc.) with proper protection and
cleaning by vacuum cleaner and dry compressed air and also by use of solvent to the extent necessary as and
when required to clean the surface off any rust, moisture, loose/ perished paints, remove oil, grease, dust, scales
etc. The rate includes cost of all materials, labours, machinery, equipments, scaffolding, staging and all other
incidental charges, all complete as per specification and direction of Engineer in Charge. At All heights & Levels

5.3 HIGH BUILD EPOXY PAINTING Supplying and applying of finished paint consist of two coats of Acrylic
Polyeurethene paint (Bergerthane PU or equivalent) of approved shade to give dry film thickness of 35 micron per
coat of synthetic enamel ( Berger, Asian paints, Shalimar etc approved by EIC ) followed by a one coat of two
components high build epoxy Micaceous Iron Oxide (MIO) pigmented intermediate coat conforming to IS 16943
(Berger EPILUX 155 HB MIO or equivalent) at dry film thickness of 100 micron. one coat of zinc phosphate primer
with 50 micron DFT ( BergerEpilux 610 Primer Red Oxide/Grey or equivalent over a coat of zinc phosphate primer
( BergerEpilux 610 Primer Red Oxide/Grey or equivalent) on steel structures including cost of all materials, labour,
scaffolding, staging , tools etc. all complete as per specification and direction of Engineer in charge.[ Total dry film
thickness of all the coats including primer coat should not be less than 220 micron] At All heights & Levels

SL NO ITEM DESCRIPTION ( Supply Items )

1 Supply of JET PUMP of capacity 2HP, deep well Pump type with constant pressure water supply of
average discharge pressure comprising of horizontal or vertical mounted, single outlet.. Pump having a
suction lift head 90m head & delivery size 50mm with cast iron casing, stainless steel or Bronze
impeller and shaft and electric motor operating on Single phase, AL supply of 180-240V. including Auto
switch control mechanism connected to the controlled panel (additional starter electrical panel with all
protection and Amp Meter / Volt Meter / Auto Manual selector) & necessary cabling for Power and
control having a total length of about 50 Rmt & a separate Electrical Feeder, suction pipe (with foot
valve) from the pump to the water tank, Suction valve, strainer, discharge NRV and valve, Pressure
Vessels. Complete as per direction of Engineer In Charge. Make: Kirloskar or Equivalent

_x000D_ Sensitivity: Internal (C3)

#
Qty UOM Cost
Unit Rate
CUM
1000

SQM
1000

EA

(Each/Number)
200

SQM

1000

CUM

200

CUM

200

CUM

150

_x000D_ Sensitivity: Internal (C3)

#
 MT

SQM
1000

SQM
500

NO

1000

RM

800

RM

800

CUM

100

SQM

1000

RM

2000

_x000D_ Sensitivity: Internal (C3)

#
 RM

1500

NO

EA

(Each/Number)

200

EA

(Each/Number)

200

RM

500

_x000D_ Sensitivity: Internal (C3)

#
 SQM

850

SQM

850

SQM

850

SQM

500

SQM

500

SQM

800

_x000D_ Sensitivity: Internal (C3)

#
 SQM

850

KG

100

SQM

2000

SQM

1500

UOM
No

_x000D_ Sensitivity: Internal (C3)

#
 Annexure- I Civil AMC at Township
Service codes ItemCo Description UOM
A EARTHWORK
Excavation in all kinds of soil other than rock including shoring, dewatering,
SCV721415110006 lowering down ground water 1.0 m below foundation carting away surplus
A1
excavated earth to areas of disposal anywhere outside factory
premises, etc. as per the diretion of Engineer in charge.
a Excavated depth 0 m to 4.5 m, carting lead within township premises CUM
Manual excavation for location which are not accesible and possible for machine
A2 Cum.
and disposasl within plant premises
A3 Grading
Earth work in excavation in cutting and dressing of sides in slopes and to proper
level in ordinary and hard soil or decomposed soft rock with all lifts, including
SHS701115060012 i clearing grubbing and clearing shurbs of both areas of excavation and filling, SQM
dewatering if required, disposal of the excavated spoils in spcified
areas within Plant boundary.
Earth filling to be done in different area including purchase of earth, excavation,
loading, unloading, spreading to required level and grade and transporting, royalty,
A4 compacting up to 95% compaction with 200 mm
thick layers as per the diretion of Engineer in charge.
i Good quality earth/murrum etc. brought from sources outside factory premises. CUM
ii Good quality earth/murrum etc. as per availability in factory premises. CUM
Backfilling in foundation/plinth with approved quality earth/murrum etc. brought
SCV721415000007 from sources outside factory premises arranged by contractor including purchase
A5 CUM
of earth, excavation, loading, unloading, and transporting,
royalty, compacting up to 95% com
Earth work in area dressing including cutting / filling upto 300mm.depth as per the
A6 SQM
diretion of Engineer in charge.

Sand filling (Free from any vegetation, organic etc ) with compaction as mentioned
A7 in drawing in layer as per engineer in charge instruction, in case of pure sand CUM
flooding with water is permissible as per the diretion of Engineer in charge.
SCV721415000005

Stone dust filling (Free from any vegetation, organic etc ) with compaction as
A8 mentioned in drawing in layer as per engineer in charge instruction, in case of pure CUM
sand flooding with water is permissible as per the diretion of Engineer in charge.

Providing and laying Pitching to slopes, grade separation and sides of storm water
drains/water pond including breaking of rubble, voids to be filled with sand,
A9 formation of neat slopes to required profile, watering, tamping, raking out joints and
grouting them in cement mortar 1:3 as per the diretion of
Engineer in charge.

i 300mm thick pitching using 300 mm down black granite stones SQM
PART B - CONCRETING
SCV721527000005 B1 M15 CUM
SCV721527000008 B2 M20 CUM
B3 M20 grade in substructure CUM
B4 M20 grade in superstructure CUM
SCV721519050054 B5 M25 grade for substructure. CUM
SCV721519050054 B6 M25 grade for superstructure. CUM
SCV721527000006 B7 M30 grade for substructure CUM
SCV721527000006 B8 M30 grade for superstructure. CUM

_x000D_ Sensitivity: Internal (C3)

#
 Providing and fixing adequate centering and leak-proof, form work/ shuttering for
concreting to required shape, size, level at any depth and height as per drawing and
SCV721410030007 B9 specifications including staging, access and working SQM
platforms, strutting, bracing and r
Supply and fixing of High yield strength deformed bars Fe 415 conforming to IS
B10 MT
1786.(Make: RINL/SAIL/TATA)
Providing and fixing rust proof expansion anchor fasteners of approved quality at
all heights, as per manufacturer's specifications including nuts, washers, bolts,
B11
scaffolding, drilling with electric drill etc on concrete
structures complete as specified
SCV721519050071 B11.1 For bolts 12mm dia 150 mm long. NOS
B11.2 For bolts 16mm dia 150 mm long NOS
B11.3 For bolts 20mm dia 150 mm long. NOS
Casting, supplying and erecting in position reinforced cement concrete precast
elements of M20 grade with 20 mm and down graded stone aggregates, as post,
B12 beam,boundary wall panels,columns,drain covers and slabs etc., for all leads and
levels including all moulds, shuttering and
centering, vibrat
B12.1 above 100 mm thick and up to 3 metres long CUM
Providing and pouring hot bitumen 80/100 grade in the groove (10 mm X 25 to
100mm) at contraction joints in concrete pavement including cleaning of the
B13 RMT
groove, finishing the surface smooth etc. complete as specified and
directed.
SCV721410030007 Providing & supplying impregnated fibre board, SHALITEX or equivalent 20
B14 SQM
mm thick for joints with hot bitumen 80/100 complete
Chipping the R. C. C. slabs or beams or foundations etc., upto 25 mm thickness
SCV721519050013 B15 and cleaning the surface and grouting the same. (Grouting shall be SQM
measured and paid under relevant Item)

Pressure Grouting treatment including placing & fixing 12mm/15mm dia. threaded
B16 nozzles of suitable length, in grid pattern of 1500 mm c/c, making the surface water SQM
tight with grouting through nozzles / sealing with polymeric sealing compound

Supply & Application of PIDICRETE CF 101 water reducing & retarding

B17 LTR
admixture for concrete
12mm dia 300 mm depth drilling, fixing grouting of reinforcement steel in RCC
B18 walll drilling with the help of drill machine and grouting the drill hole NO.
after anchoring the reinforcement steel by HILTI HIT HY150

SCV721540120005 Breaking of R.C.C in floor and disposing debris complete in all respect as diected
B19 CUM
by the EIC.
PART C - MASONRY AND PLASTERING
Providing Constructing first class Fly ash brick masonry of thickness 230 mm and
above in bricks conforming to clas 35A of IS1077 at all heights and depths for
C retaining walls,wall footings, parapets, partitions, steps, drains, manholes, trenches,
etc. including curing and all finishing activities complete
in all respect.

SCV721519080001 C1.1 in cement mortar 1:5 in foundation and plinth CUM

SCV721519030020 C1.2 in cement mortar 1:5 in superstructure up to 15 m height above plinth. CUM
Providing and applying cement plaster at all surfaces (internal/external/ceiling etc.)
C2 at all levels including surface preparation, staging, scaffolding roughening, finishing
the surfaces, curing etc. complete
SCV721520040003 C2.1 1:6 Cement Sand plaster 12 mm thick sq. m.
SCV721519050005 C2.2 1:6 Cement Sand plaster 20 mm thick sq. m.
Providing and laying plaster of paris 3mm thick over walls including
C3 finishing the surface smooth by rubbing with emery paper with arranging all kind of sq. m.
scaffolding etc as per requirement.

_x000D_ Sensitivity: Internal (C3)

#
 Providing and applying 20 mm thick sand faced plaster to all external surfaces at
all levels in two coats, 12 mm thick average base coat in cement mortor 1:5 and
C4 SQM
8mm thick finish coat in cement mortar1:2 using fine sand for
finish coat, including preparati
Providing and Laying in position Damp proof Course consisting of HDPE sheet
C5 400 micron thick , 230 wide and cement mortar 1:4 of 50 mm RMT
thickness.
Making holes of any shape in masonry upto 250 mm thickness and making good
C6 NOS
plaster/finish etc. complete or as directed by EIC
Repair of crack in RCC/brick wall/slab using special products of prime
manufacturer like SIKA/FOSROC/PIDILITE/BASF as per the mabufacturer's
C7 SQM
specification including the cost of tools,tackles,scaffoldings at all heights/depths as
per the instructions of EIC.
Demolishing Brickwork (taking all necessary safety precautions for all depths
below plinth level including supply of all tools and tackles ,necessary scaffolding
C8 ,propping ,underpining ,cleaning and stacking of serviceable material,disposal of CUM
unserviceable materials etc. complete in all respect as per
SCV721540120003 the instructionof the EIC.

SCV721520000003 Cement punning for walls, ceilings, etc. after necessary surface
C9 SQM
preparation and including scaffolding, etc. complete as per direction of EIC
PART E - FLOORING & TILING,CEILING

Providing and laying Anti Skid Ceramic tile flooring of kajaria - opera beige (or
johnson project line series, nitco diamond series make) of size 300 X 300 mm
or of approved brand and shade, with paper thin joint and to required slope, set on
20mm thick cement mortar 1:4, including providing cement slurry and pointing of
E1 joints with tilemate or equivalent to match the colour of tiles, curing, oxalic acid SQM
washing etc., covering with POP/ Jute for the same complete. The rate shall include
providing patterns, borders, inlays etc complete with all leads & lifts at all levels as
per specifications given in the drawings, and as per the instructions of Engineer in
Charge.
SCV721525040016
Providing and fixing ceramic wall tiles of approved quality & shade (Make:
Kajaria/ Bell/ Johnson or equivalent) on wall at all positions , set jointed in neat
E2 SQM
cement slurry, laid on 25 mm thick plaster with CM 1:6 complete as per direction of
SCV721525040015 EIC.

Providing and laying 100mm height Ceramic tile Skirting for

balconies of (or johnson project line series, nitco diamond series make) of approved
shade, with paper thin joint ,with necessary adhesives ofapproved makes, suitably
roughened cement slurry and pointing of joints with tilemate or eqivalant to match
SCV721525040001 E3 RMT
the colour of tiles, chasing of wall,curing, oxalic acid washing and making groove
at the junction ofplasteringand tiles. The rate shall include providing patterns,
borders, etc complete with all leads & lifts at all levels as per specifications given in
the drawings, and as per the instructions of Engineer in Charge

Providing and laying wall tiles (ceramic based decorative type) 315 x 420 joint free
E4 SQM
on a 25 mm thk bedding of cement mortar (1:3)

Providing and laying Vitrified tile flooring of Kajaria kerrogress - 6029(or johnson
project line series, nitco diamond series make) of size 600 X600 mm, with paper
thin joint and to required slope, set on 20mm thick
cement mortar 1:4, including providing cement slurry and pointing of joints with
E5 SQM
Acid Resistant or equivalent to match the colour of tiles, curing,
oxalic acid washing etc., ,covering with POP/ Jute for the same. The rate shall
include providing patterns, borders, inlays etc complete at with allleads & lifts all
levels as per specifications given in the drawings, and as per the instructions of EIC.

_x000D_ Sensitivity: Internal (C3)

#
 Providing and laying 100mm height Vitrified tile Skirting of Kajaria kerrogress -
6029 (or johnson project line series, nitco diamond series make) of size 600 X 600
mm, with 3m spacers, & necessary adhesives of approved make. The rate shall
include the cost of 3mm spacers between tiles, epoxy grouting of joints to match the
E6 RMT
colour of tiles, chasing of wall to flush the skirting in line with the wall, fixing with
approved adhesives, curing, oxalic acid washing etc complete, with all leads & lifts
at all levels as per specifications given in the drawings, and as per the instructions
of EIC.

Flooring Providing and laying to slopes and levels thichkness 30mm cement
concrete M20 by using graded coarse aggregate size 12.5 mm and down size
E7 SQM
including surface preparation by one coating of plain cement mortar, compaction,
curing, etc. complete, as specified & directed by the EIC.
Providing and fixing false ceiling with 12mm thick gypsum anhydrous board and
SCV721523020002 E8 aluminium section including support hanger,screwing,accesoories,tools and tackles SQM
etc complete as per direction of EIC

Providing & fixing Solid wooden flooring of Pergo - 028031 antique oak of size
1.20 X 1.80 m (or other approved make) finished as per theArchitect's approval.
The Flooring shall be laid to lines & levels as shownin the drawing. The sub floor
shall be free of moisture & other laitence.The underlay shall be resilent of 15mm
foam pad & shall be laid on levelled surface. The finished flooring material shall be
E9 12.4mm total thicknesswith 3.6mm wear layer on top.The edges of the sub foam SQM
shall be lapped toa minimum of 1" & sides of the wooden floor shall have a tongue
& groovejoint. The foam shall be properly struck on the concrete surface below
witha foam adhesive. the rate shall also include cost of tanstition profilling ofjoints
of different flooring materials & reducers wherever necessary with all leads & lifts
at all levels etc., complete & and as per the instructions of EIC.

Providing & fixing 100mm high Solid wooden skirting of Pergo - 028031 antique
oak of size 1.20 X 1.80 m (or other approved make) of approved thickness using
E10 adhesives, quality, make and shade as per the design shown in the drawing. The rate RMT
shall include all leads & lifts at all levels & finishing as per the standard etc.,
complete and as directed by EIC

Providing & fixing Laminated wooden flooring for Master bedrooms of Grand
teak Indiana AC - 4grade of size 0.20 X 1.20 m (or other approved make) finished
as per the Architect's approval. The Flooring shall be laid to lines & levels as shown
in the drawing. The sub floor shall be free of moisture & other laitence.The
underlay shall be resilent of 15mm foam pad & shall be laid on levelled surface.
The finished flooring material shall be 12.4mm total thickness with 3.6mm wear
E11 Sqm
layer on top.The edges of the sub foam shall be lapped to a minimum of 1" & sides
of the wooden floor shall have a tongue & groove joint.
The foam shall be properly struck on theconcrete surface below with a foam
adhesive. the rate shall also includecost of profilling of joints of different flooring
materials & reducerswherever necessary with all leads & lifts at all levels etc.,
complete & andas per the instructions of Engineer in Charge

Providing & fixing 100mm high Laminated wooden skirting for Masterbedrooms
of Grand teak Indiana AC - 4grade (or other approved make) ofapproved thickness
E12 using adhesives, quality, make and shade as per the design shown in the drawing. RMT
The rate shall include all leads & lifts at alllevels & finishing as per the standard
etc., complete and as directed by EIC.

Providing and laying single piece machine cut 20mm thk pre polished Granite
stone slab flooring to be layed over a bed of 20mm thick CM 1:4 inclusive of
pointing of joints with pigment to match the colour of stone,making hole for grill
E13 fixing, curing, covering with P.O.P/ jute & cleaning when required complete. The SQM
rate shall include providing patterns, borders,inlays etc complete with all leads &
lifts at all levels as per specifications given in the drawings, and as per the
instructions of EIC.

_x000D_ Sensitivity: Internal (C3)

#
 Providing and laying in position to pattern called for 20mm thick Polished
Marble/Italian Marble flooring of approved size, design & colour, to the locations
as called for, laid over a bed of minimum 20mm thick cement mortar 1:4,joints
filled and finished neat with pigmented white cement including final polishing,
washing with light acid, etc. complete. Slabs, prepolished shall
E14 SQM
have the edges machine cut to precise sizes to produce very fine joints.Allow for
POP protective layers, removal and cleaning up. The rate shall include providing
patterns, borders, inlays, with total 7 coats of polishing,complete with all leads &
lifts at all levels as per specifications given in the drawings,
and as per the instructions of EIC.

Polishing of existing Italian Marble with all necessary crack

E15 SQM
filling,grinding,buffing etc complete in all respect as per the direction of EIC.

Providing & laying Pre polished Marble skirting 100 mm high fixed over a bed of
10mm thick CM 1:4 & adhesives, including chasing wall where necessary, making
good the chased surface, curing, covering with POP cleaning, pointing of joints
with white/coloured cement,joints should be paper thin finish, curing and making
E16 groove at the junction of plastering RMT
and skirting , including half round edge polishing. The rate shall include providing
patterns, borders, with total 7 coats of polishing after laying etc.,complete with all
leads & lifts at all levels as per specifications given in the drawings, and as per the
instructions of EIC.

Proving and laying Asphalt flooring 35mm thk, ratio by weight

::100:140:550:3(asphalt:stone dust: snad: asbestos) stonedust are non electrical
E17 SQM
conductivity material with the compressive strength not less than 3Mpa while the
eletrical insulation over one m

Providing and Fixing coloured concrete pavement Tile of size

375*375*25mmconfirming to IS specifications having min. breaking strength M 30
infloor and skirting over 25mm thk cement mortar (1:3) to proper slope, line and
level including cutting to required size and shape, fixing at corners and splays and
E18 grouting the joints with silicon sealant to match the color and shade of stone SQM
including cutting to shape in etc. including filling the joints with white coemtand
color pigment to match the color and shade of tiles complete as per the design and
dwg. with cost of materials labour conveyance taxes T&P etc compete as per
direction of EIC.

Providing and fixing Kota stones of thickness (22-25mm) approved size and brand
laid over cement sand mortar of thickness 20mm in 1:3 propertion with proper
E19 SQM
slope/gradient including all finishing work like polishing, grouting etc. complete in
all respect as per the instruction of the EIC.
Providing and fixing Kota stones of thickness (18-20mm) approved size and brand
laid over cement sand mortar of thickness 20mm in 1:3 propertion with proper
E20 SQM
slope/gradient including all finishing work like polishing, grouting etc. complete in
all respect as per the instruction of the EIC.
Providing and fixing Kadpa stones of thickness (25-45mm) approved size and
brand laid over 20mm thick cement sand mortar in 1:3 propertion inapproved
E21 pattern with proper slope/gradient and including all finishing work like polishing, SQM
grouting etc. complete in all respect as per the instruction of the
EIC.
Supply & fixing of glass mosaic tiles for swimming pool matching with existing
E22 flooring in colour, pattern &thickness including the cost of tools, tackles,fixing SQM
resin,masionary work etc. as per the instructions of EIC

_x000D_ Sensitivity: Internal (C3)

#
 Providing and laying Rubber floor tiles for Auditorium, playing
areas & as mentioned in the drawings, durable & recycled- rubber material muffles
noises, dampens vibrations with polymeric binders, surface coloring, welding &
E23 mottling shall be uniform throughout the entire thickness of the rubber floor tile SQM
required period etc., complete. The rateshall include providing patterns, borders,
inlays etc complete with all leads & lifts at all levels as per specifications given in
the drawings, and as per the instructions of Engineer in Charge

Providing and fixing PVC vinyl flooring of

E24 4mm thick and PVC vinyl sheet with adhesive of approved brand,colour and shade SQM
as directed by EIC.
Supply & fixing of anti-skid venyl flooring for new/repairing jobs of prime
manufacturer make of thickness as below including the cost of material for fixing,
E25 SQM
transportation, labour, tools, tackles, removal of old damaged existing
venyl etc. as per the instructions of EIC.
Providing and Laying 60mm thick Precast Interlocking Pavers of Basant Betons
or any other approved make
E26 and colour, over a sand cushion of 20mm thickness as per the details given in the SQM
drawing including the cost of T&P,joints filling with matching shade
,complete in all respect as per the direction of EIC.

Providing and laying of Pre -polished 20mm thick White Marble flooring for
treads & risers, to be fixed in over a bed of 20mm thk CM 1:4, inclusive of
pointing of joints with pigment to match the colour of tile, curing, ploishing &
E27 cleaning when required etc complete. The rate shall include providing patterns, SQM
making grooves & making front edge half round etc., complete with all leads & lifts
at all levels as per specifications given in the drawings, and as per the instructions
of EIC.Staircase

Providing and laying of Pre -polished 20mm thick granite flooring for treads &
risersof entrance steps, to be fixed over a bed of 20mm thick CM 1:4 inclusive of
pointing of joints with pigment to match the colour of tile
E28 ,curing, & cleaning when required etc complete. The rate shall include providing SQM
patterns, borders, inlays etc complete with all leads & lifts at all levels as per
specifications given in the drawings, and as per the instructions of Engineer in
Charge

Providing & laying 20mm thk. Pre-polished marble Urinal partitions of size (1.5
x 0.6) as per the detailed drawing, polished on both side with bull nosing at exposed
edges, including cutting groove in wall,finishing/grouting with cement
E29 mortor,making provision for fixing bolts and nuts, sealing the joints with sealant SQM
(Dow corning), curing, cleaning when ever instructed, pointing of joints with
white/coloured cement, etc.,complete with all leads & lifts at all levels &as per the
instructions of EIC.

Dismantling of damaged flooring of

types (tile/granite/venyl/wooden/teracotta/stone) and disposal of debris lead upto
E30 SQM
1000M and at all heights/depths including tools,tacckles,transportation etc. as per
the direction of EIC.

Providing and laying Clay tiles for Terrace floor (slopped roofs) of approved
size, make, quality and uniform shade with paper thin joint set in 20mm thick
cement mortar 1:4 with cement slurry and pointing of joints with tile grout of
E31 SQM
approved make to match the colour of tile curing, etc complete at all levels as per
specifications and drawings, including all leads and lifts as
per the instructions of EIC.
Providing and fixing of BWP Plywoodof 18/19mm thickness including all
E32 tools,tackles,accessories and materials required for fixing and complete as per the SQM
direction of EIC.

_x000D_ Sensitivity: Internal (C3)

#
 Supply, Fabrication and Installation of ALUDACOR/TECHNAL/MX-SSG
Aluminium Composite Panel
(ACP) Systems of Hydro (or equivalent make) at all heights as per approved design
& specification using
E33 TECHNAL mullion and other aluminium extruded sections of 6063 grade alloy SQM
including aluminium
channels & sealants with all required tools tackles, scafoldings, labour,
transportation etc. all as per the
instructions of EIC.

Polishing of statues of man height and width giving a clear finish and shine
E34 to the existing strcuture.Surface should be rubbed to remove flacks and cleaned Nos
properly prior application of primer and paint.
PART F - WATER PROOFING
Providing and laying to slopes and levels cement concrete screeding M20 by using
F1 20 mm nominal size metal aggregates including surface preparation, compaction, SQM
curing, etc. complete, upto 75mm as specified & directed by EIC
Supply & application of Siliconate injection grout mixing with water by 1:5 or
F2 LTR
1:10 for rising dampness in brick masonary(DAMPFREE)
Supply & application of Dampproof coating with OPC cement Putty for
F3 internal walls,ceilings & RCC water Tanks(DAMPGUARD)(35-40SqFt per KG for KG
two coat)
Supply & Application of acrylic Bonding Agent(PIDICRETE MPB) on old
F4 KG
concrete/plastered surfaces as a neat coat(75-80Sqft per KG)
Providing and laying protective screed of average 50 mm thick admixed with
integral liquid waterproofing compound of STP or equivalent prime manufacturer
(Conforming IS 2645: 2003) as per Manufacture specification, on the coated floor
surface in panels (4' X 4') filling the joints with bitumen filler & providing and
applying mortar admixed with a Shali SBR polymer modified SBR based emulsifier
F5 or with product of equivalent prime manufacturer on coated surface of cant strip
(rounding ),parapet wall including all tools, tackles, materials in complete as per the
instructions of EIC in adherence to standard procedures of safety.(All material
storage, transportation & security will be in party’s scope.)

i M15 SQM
F6 Pressure Grouting in nozzles Nos
Application of elastometric Cementitious waterproof coating such that
F7 porosity of concrete structure will be filled up and give a water resistant surface
i Apply and supply of FORSOC MAKE Nitocote CM210/or Equivalent SQM
ii Apply and supply of FORSOC MAKE Nitoseal PU40 or Equivalent SQM
iii Epoxy based SQM
Erection of Scaffolding-Staging(1set).Scaffolding with ledger and cuplock system
F8 such that workable platform can be made over it which includes supply and doing CUM
stagging at appropriate location including MS jally etc
PART G - DOORS, WINDOWS AND VENTILATORS,CANOPYS
Providing and fixing in position 40mm thick superior class Indian teak wood
panelled door in 65mm x 140mm teak wood frame including fixing screws,
G1 holdfasts, copper oxidised brass fixtures, stoppers, glazing, beading, architrave, a SQM
coat of coal tar etc. complete in all respect as per the direction of
EIC.
G1.1 Non-decorative type with commercial plywood on both faces SQM
Providing and fixing in position M.S. Steel windows IS:1038 with standard rolled
sections including 4 mm thick plain sheet glass with necessary holdfasts, oxidised
G2 brass fixtures/fastners, putty, glazing clips, peg stay,
handle, tower bolts, screws etc.
G2.1 With 60% openable windows/ventilators SQM
G2.2 With 100% openable windows / ventilators SQM

_x000D_ Sensitivity: Internal (C3)

#
G2.3 With fixed windows/ventilators SQM
Providing and fixing in position anodised Aluminium Casement Windows with
top or side hung shutters with 6.3 mm clear / laminated glass panes in 'z' section
G3 SQM
including rubber lining, transoms, mullions, neoprene gaskets,
aluminium fixtures such as c. p. br

Providing and fixing in position anodised aluminium doors in 100 x 45 mm

bottom rails, 6.3 mm thick laminated glass glazing for top portion, bottom portion
provided with 18 gauge aluminium sheet on both the sides with plywood packing in
between, 2 Nos. with extra
G4 SQM
accessories like lock etc complete with cost,conveyance,royalties and taxes of all
materials and cost of all
labour with T & P required for the work etc and complete with all respect and
directions of EIC.

Providing & Fixing universal type hydraulic door closer of approved quality
G5 Nos.
complete

Providing and fixing in position Patch fitting doors, 12mm thick Toughened Glass
with etching, door shutter
mounted on SS corner patch fitting brushed steel finish, floor spring to strutural
glazing frame, corner
G6 SQM
locks, SS handles including removing of existing glazing and finishing the same all
as per detailed
drawings etc., complete and as directed by Engineer-in-charge. (Includes all leads
and lifts at all levels)

Providing & fixing of approved make & colour PVC doors with necessary
G7 SQM
accessories,locks,door stoppers etc complete as per the direction of EIC.
Providing and fixing of floor spring of approved make including removal of
G8 existing floor spring with all necessary tools,tackles and accessories,floor cutting NO
etc required for fixing to complete the work as per the direction of EIC
Proving and fixing silicon sealant in glass door/Partition/ any joints/ACP panels etc
G9 RM
to fill the gap and complete the work as per the direction of EIC.
Provide and Fixing of 4 mm toughened glass in Aluminium pivoted/Sliding
G10 Sqm
windows /Doors with necessary fittings by usings tools and tackels.
Providing and Fixing 100 mm wide Indian fabric for vertical blinds of approved
G11 make, colour and texture including all fittings of approved quality complete as Sqm.
directed by the Architects - Basic Rate - Rs.120/- Sft
G12 Providing and fixing Tower bolts(8-10") Nos
G13 Providing and fixing Cylindrical door locks Nos
G14 Providing and fixing door handles Nos
GLASS DOOR LOCK(15 mm)
G15 Nos
Brands may vary as per the site requirement
G16 Rubber Gasket mtr
Supply & Fixing of Aluminium Partition Wall made of natural matt finish
anodized HINDAL aluminium section of size 2.5"*1.5" inch (or equivalent) with
G17 SQM
1.2 M height smoke glass at 0.9 M height from finished floor level including all
accessories,tools,labour cost etc as per the instructions of EIC.
Supply & Fixing of Aluminium Partition Wall made of natural matt finish anodized
HINDAL aluminium section of size 2.5"*1.5" inch (or equivalent) with
G18 1.2 M height smoke glass at 0.9 M height from finished floor level & aluminium SQM
sheet as partition material (design as per EIC) including all accessories,tools,labour
cost etc as per the instructions of EIC.
Replacement of laminates over partitions,furniture,doors etc. including removal of
G19 existing damaged laminates including all tools,tackles,
material,pasting gum etc. as per the instructions of EIC.
G19.1 Ply Laminates/Vinier etc. SQM

_x000D_ Sensitivity: Internal (C3)

#
 Repairing of wooden polish of damaged furniture and doors including two coats of
putty, two coats of simillar colour paint, two or more coats of polish material for
G20 SQM
gloshy finish type or mat finish type as per requirement including all tools,tackles,
material,T&P etc. as per the instructions of EIC.
Supply and fixing of frosted films on window or doors as per direction of EIC to
G21 SQM
protect from sunray.
Supply and fixing of Mosquito net of Galvanised iron material on windows
G22 including cutting to required sizes,screwing and fixing as per requirement and SQM
complete as per EIC.
PART K - ACCESSORIES for building
Providing laying and fixing in position PVC rain water pipe (Class I to IS 4985)
with necessary MS clamps and wooden blocks of approved quality, with required
K1
specials including lead caulking joints, testing and painting the
pipes wherever required with 3
SCV721411240142 K1.1 100 dia RMT
SCV721411240141 K1.2 150 dia RMT
PART L - MISCELLANEOUS WORKS
Providing pre construction termite proofing treatment as per IS:6313 (PART II)
under foundations, floor including required peripheral area outside plinth for
L1 SQM
various buildings for a guaranteed period of 8 years as specified and
directed .
Providing G.I. Sheet 1mm, 300 wide including making to required shape and fixing
L2 RMT
to the expansion joint as per drawing
Providing and fixing chicken wire mesh of 26 SWG where ever required as per
L3 SQM
instructions of engineer incharge
Providing and fixing medium duty GI pipes of various sizes at all positions,
L4
concealed in wall with all fittings conforming to relevant IS standard.
(a)15 mm nominal bore RMT
(b) 20 mm nominal bore RMT
(c)25 mm nominal bore RMT
(d) 50 mm nominal bore RMT
Providing and fixing ceremaic white/ colour Kitchen Sink ( size: 600x450x250
mm) of approved make including grouting bracket, CP connecting pipe, wastepipe,
L5 NOS
coupling nut ,water supply connection etc.
complete.
Providing and fixing ceramic white/ colour wash basin ( size: 550x400 mm) of
L6 approved quality, including grouting bracket, flexible connecting pipe, NOS
waste pipe, coupling nut ,water supply connection etc.
Providing and fixing white/coloured vitreous European type water closet
L7 including low level PVC cistern , P trap/S trap , seat & cover etc of approved NOS
quality complete.
Providing and fixing a set of half stall urinals (size: 380x390x600 mm ) with a
ceramic partition plate (size:85x320x700 mm) and a automatic flush cistern with
L8 NOS
lead ( capacity: 5 lit.), waste pipes etc. of approved quality and shade
complete.
Providing and fixing superior class Plumbing fittings of approved quality. (Jaguar
L9
or similar make)
(a) Pillar cock , 15 mm nominal bore. NOS
(b) Stop cock, 15 mm nominal bore. (Concealed type) NOS
(c) Stop cock, 20 mm nominal bore. (Concealed type) NOS
(d) Angular stop cock, 15 mm nominal bore. NOS
(e) Bib cock , 15 mm nominal bore NOS
(f) Grating, 100 mm dia NOS

_x000D_ Sensitivity: Internal (C3)

#
 Over head Shower single flow with arm 190 mm light body with wall flange
L10 NOS
complete.
L11 Providing and fixing CI Nehani trap at floor complete NOS
Providing and fixing HDPE pipes for drainage/ sewerage including all fittings,
L12
making groove in concrete/ wall etc. complete.
(a) 100 mm diameter RMT
(b)150 mm diameter. RMT
Providing and fixing bevelled edge mirror of superior glass approved
L13 quality complete with 6 mm asbestos sheet ground fixed to wooden cleats with CP SQM
brass screws and washers.
L14 Providing and fixing Acrylic hanger hooks (set of six) complete. NOS
L15 Providing and fixing Acrylic Towel ring complete. NOS
L16 Hiring of JCB excavator Hr
SAD781118080011 L17 Hiring of Tipper Hr
Supply and fixing of Sewerage chamber / Manhole chamber covers made from Cast
Iron of size 1m*1m with necessary frame support and hinge for ease in removal and
L18 maintenance purpose including 1 coat of Red oxide and 2 coats of enamel painting, No
complete the work in all respect as per the direction
of EIC.

Supply, fabrication & erection of structural steel including site Storage, Hiring
Hydra, trailor/truck/tractor, site handling loading ,unloading ,shifting, inspection &
testing where required, minor rectification, ,standard fitments etc. with rolled
SCV721525090004 section/entirely from angles, channels, chain linked fence material, MS
L19 MT
plates,CANOPY etc. at all levels including unpacking, minor cutting, welding,
grinding, bolting, threading, assembly including fixing of fasteners, complete
erection, assembly & alignments, plumbing, erection of brackets, etc. as per
drawing as per site requirement & as per the directions of EIC.

SS Handrailing,-Providing, fabricating and fixing in position Stainless

steel railings (Staircase) of approved make as per design, detailed drawing and
specifications, fixing as per standards ( SS grade 304: 18SWG) to 0.9m ht with SS
tube /horizantals/ verticals & balusters. The top rail of 50mm dia and with verticals
of 40mmx8mm Stainless Steel flat section in
intervals as shown in the drawing or at a span of 1.2m, supported with horizontal
railings of 15mm dia stainless steel tubes in 4 rows of required gauge as specified
L20 RMT
and a 10mm dia SS pipe to connect the vertical support to the top rail all as in
detailed drawings, with suitable anchoring
arrangements to walls and steps, necessary welding, base plates, screws,clamps and
necessary hardwares, lugs etc complete. at all leads and lifts.The joints to be
approved by the engineer in charge.The rate also to include necessary buffing,
covering the railing with proper protective covers before handing over etc complete.
Same as presently installed

M Sanitary

Repairing of flushing system in toilets with necessary fittings .All the necessary
M1 Nos
fittings are supplied by contractor to complete the work as per the direction of EIC.

Providing and fixing P.V.C Over head (Sintex make) tank with all
pipings,jointers,elbow etc. and valve arrangement with all labour & materials Nos
M2
,including cost, T&P , scaffolding etc., complete as directed by the Engineer- in-
charge.
N SEWERAGE DISPOSAL
Supply of all materials, joining materials , labour and T&P and laying UPVC SWR
PIPES of Standard make with ISI Mark duly approved by the Engineer- in- charge
N1
including jointing, earthwork in excvation of trenches in all kind of
soil to the required depth
i 150mm dia ( ISI Marked) Rmt.

_x000D_ Sensitivity: Internal (C3)

#
 Supplying all materials, labour T&P for jointing of the UPVC SWR SEWER pipe
fittings of standard make duly approved by the Engineer-in-charge with joining
N2
material etc. suitably required for fixing on 100mm dia soil waste pipe complete
with requissite t
i 110mm dia "P" Trap no
ii 110mm dia Bend Plain no
iii 110mm Door Bend no
iv 110 X110 X110 mm dia Single Junction with Door no
v 110mm dia Terminal Guard no
vi 110mm dia. Floor trap no
Fixing of UPVC vent pipes Including labour & T&P all complete as directed by
N3
the Engineer-in-charge.
i 110mm Pipe Rmt.
ii 110mm Vent Cowl Rmt
O Boundary Wall(BW)
O1 Providing and fixing of concerntina wire Rmt
Providing and fixing of Y angle of 50 X 50 X 6 mm with leg 450mm long with V
O2 No
section of 350 X 350 mm.
O3 Providing and fixing of Barbed wire Rmt
P Drain
SCV721411240047 P1 a. 300 mm dia RCC pipe (NP – 3 class) Rmt
P2 b. 400 mm dia RCC pipe (NP – 3 class) Rmt
P3 c. 500 mm dia RCC pipe (NP – 3 class) Rmt
P4 PVC Pipe 40mm dia for horticulture water supply RM
P5 Ball Valve half inch NO
P5 Nipple half inch no
P6 Short piece 20mm NO
R Road Maintenance
SCV721519050001 R1 Providing and fixing new kerb stone CUM
R2 Removal of old kerb stone Rmt
R3 Fixing of old kerb stone Rmt

_x000D_ Sensitivity: Internal (C3)

#
Unit Rate

_x000D_ Sensitivity: Internal (C3)

#
_x000D_ Sensitivity: Internal (C3)
#
_x000D_ Sensitivity: Internal (C3)
#
_x000D_ Sensitivity: Internal (C3)
#
_x000D_ Sensitivity: Internal (C3)
#
_x000D_ Sensitivity: Internal (C3)
#
_x000D_ Sensitivity: Internal (C3)
#
_x000D_ Sensitivity: Internal (C3)
#
_x000D_ Sensitivity: Internal (C3)
#
_x000D_ Sensitivity: Internal (C3)
#
_x000D_ Sensitivity: Internal (C3)
#