SOLAR ROOF SYSTEM

Preferred Appearance
SunTegra Shingles integrate directly with composi-
®

tion roofs, enabling them to blend in with the roof

and provide a sleek appearance preferred by four
out of five customers.

High Performance
Premium monocrystalline solar cells and patented
TegraVent™ technology ensure best-in-class
efficiency and energy performance.
Exceptional wind, snow and fire ratings ensure
SunTegra Shingles will perform in a wide variety
®

of environmental conditions.

Reliable and Safe Patented

TegraVent™
SunTegra Shingles are based on proven solar cell technology
®

and module technology and have passed both maximizes

performance
solar and roofing certifications.
Locking connectors, integrated wiring design, and
welded junction box connections ensure the high-
est degree of electrical safety.

Simple and Easy to Install

Lightweight design avoids the need for structural
engineering and building permits. 50% fewer parts
than a conventional rack-mounted solar system
and installs in half the time.
Integrated wiring makes wire management a snap.

SunTegra® Shingle offers homeowners,

builders and installers an innovative way to
integrate solar directly into the sloped roof
of a home, commercial building or carport.
SunTegra Shingle solar roof systems integrate
®

directly with composition roofing systems,

providing the perfect combination of
aesthetics, performance and value.

Designed, Engineered
and Assembled in the

www.suntegrasolar.com
★ U S A ★
California Energy
5002039 Commission
T E C H N I C A L   S P E C I F I C AT I O N S SOLAR ROOF SYSTEM

ELECTRICAL PERFORMANCE MECHANICAL CHARACTERISTICS

STS 114 STS 110 STS 105 Dimensions - Outside Area 52 5/8" x 23 1/8" x 3/4"
Peak Power (Wp) 114 W 110 W 105 W Dimensions - Exposed Area 52 1/16" x 19 3/4"
Power Tolerance +5/-3 % +5/-3 % +5/-3 % Weight 18 lbs (250 lbs per square)
Panel Efficiency* 17.2 % 16.6 % 15.9 % Cells 24 x High Efficiency
- Watts / Sq ft* 15.9 15.4 14.7 monocrystalline

Voltage at Peak Power (Vmp) 12.78 V 12.72 V 12.65 V Front Glass High transmission
tempered glass
Current at Peak Power (Imp) 8.92 A 8.66 A 8.30 A
Junction Box IP-65 rated with
Open Circuit Voltage (Voc) 15.52 V 15.46 V 15.39 V
one diode per panel
Short Circuit Current (Isc) 9.68 A 9.41 A 9.06 A
Output Cables 6" 12 AWG cables with
Maximum System Voltage 600 V 600 V 600 V Amphenol H4
Series Fuse Rating 15 A 15 A 15 A PV Connectors
Temperature Coefficients IMS (Frame) Advanced composite
Power (Wp) -0.404 (%/C) polymer with high UV
Voltage (Voc) -0.291 (%/C) stability
Current (Isc) +0.038 (%/C)
NOCT (+/-2C) 57 C

S A F E T Y A N D P E R F O R M A N C E C E R T I F I C AT I O N S A P P L I C AT I O N L I M I T S
PV Certifications UL 1703 (2013 Revision) Module Operating Temperature -40C to +90C
CEC Listed
Max. Static Load Rating 112 lbs/ft2, 5400Pa
Roof System Certifications Fire: UL 790, Class A, C
Wind: UL1897 Max. Wind Rating 130 mph
Rain: TAS 100-95 Impact Resistance (Hail) 2" steel ball (1.18 lbs)
Building Certifications (pending) ICC AC 365 dropped at 51"

SHINGLE DIMENSIONS WARRANTIES

Limited power warranty 25 year
52 5/8" Limited product warranty 10 year

52 1/16"*
23 1/8" YOUR AUTHORIZED DEALER

19 3/4"*

*Dimensions of exposed area once installed

Exposed area is 7.15 square feet per solar shingle

Please read the safety and installation instructions before using this product. www.suntegrasolar.com
Visit www.suntegrasolar.com for more details.

©2018 SunTegra® is a registered trademark of Integrated Solar Technology, LLC. Specifications subject to change without notification. Document #1-00020 Rev K