LCD-TV

Chassis : N66F
Model : LA22B350F2
LA22B450C8

SERVICE Manual

TFT-LCD TV Contents

1. Precautions

2. Product specifications

3. Disassembly and Reassembly

4. Troubleshooting

5. Exploded View & Part List

6. Wiring Diagram

LA22B350F2

Refer to the service manual in the GSPN (see the rear cover) for the more information.
 Contents
1. Precautions............................................................................................................... 1-1
1-1. Safety Precautions.......................................................................................................... 1-1
1-2. Servicing Precautions...................................................................................................... 1-2
1-3. Electrostatically Sensitive Devices (ESD) Precautions................................................... 1-2
1-4. Installation Precautions................................................................................................... 1-3
2. Product specifications............................................................................................. 2-1
2-1. Feature & Specifications.................................................................................................. 2-1
2-2. Specification Comparison to Old Models......................................................................... 2-5
2-3. Accessories..................................................................................................................... 2-6
3. Disassembly and Reassembly................................................................................ 3-1
3-1. Disassembly and Reassembly (LA22B350F2)................................................................ 3-1
3-2. Disassembly and Reassembly (LA22B450C8)................................................................ 3-4
4. Troubleshooting....................................................................................................... 4-1
4-1. Troubleshooting............................................................................................................... 4-1
4-2. Alignments and Adjustments......................................................................................... 4-13
4-3. Factory Mode Adjustments............................................................................................ 4-14
4-4. White Balance - Calibration........................................................................................... 4-24
4-5. HOW TO UPGRADE..................................................................................................... 4-26
5. Exploded View & Part List....................................................................................... 5-1
5-1. LA22B350F2 Exploded View........................................................................................... 5-1
5-2. LA22B450C8 Exploded View........................................................................................... 5-3
5-3. LA22B350F2 Parts List.................................................................................................... 5-5
5-4. LA22B450C8 Parts List................................................................................................. 5-20
6. Wiring Diagram......................................................................................................... 6-1
6-1. Wiring Diagram................................................................................................................ 6-1
6-2. Wiring Picture.................................................................................................................. 6-3
6-3. Connector Functions....................................................................................................... 6-4
6-4. Cables............................................................................................................................. 6-4
GSPN (Global Service Partner Network)
Area Web Site
North America http://service.samsungportal.com
Latin America http://latin.samsungportal.com
CIS http://cis.samsungportal.com
Europe http://europe.samsungportal.com
China http://china.samsungportal.com
Asia http://asia.samsungportal.com
Mideast & Africa http://mea.samsungportal.com

© 2009 Samsung Electronics Co.,Ltd.

This Service Manual is a property of Samsung Electronics Co.,Ltd.
All rights reserved.
Any unauthorized use of Manual can be punished under applicable
Printed in Korea
International and/or domestic law.
P/N: BN82-00598A-00
 3. Disassembly and Reassembly

3. Disassembly and Reassembly

This section of the service manual describes the disassembly and reassembly procedures for the LA22B350F2 LCD TV.
WARNING: This LCD TV contains electrostatically sensitive devices. Use caution when handling these components.

3-1. Disassembly and Reassembly (LA22B350F2)

Cautions: 1. Disconnect the LCD TV from the power source before disassembly.
2. Follow these directions carefully; never use metal instruments to pry apart the cabinet.

Description Picture Description Screws

1. Place the TV face down on cushioned table.
Remove the screws from rear cover.

x3

3-1
3. Disassembly and Reassembly

Description Picture Description Screws

2. Remove the screws from the Stand.
Remove stand.

x3

3. Disconnect cable from the boards.

3-2
 3. Disassembly and Reassembly

Description Picture Description Screws

4. Remove the Speaker.

5. Remove Screw from the the boards.

x8

x2

x1

※ Reassembly procedures are in the reverse order of disassembly procedures.

3-3
3. Disassembly and Reassembly

3-2. Disassembly and Reassembly (LA22B450C8)

Cautions: 1. Disconnect the LCD TV from the power source before disassembly.
2. Follow these directions carefully; never use metal instruments to pry apart the cabinet.

Description Picture Description Screws

1. Remove the screws from the Stand.
Remove stand.

x2

3-4
 3. Disassembly and Reassembly

Description Picture Description Screws

2. Place the TV face down on cushioned table.
Remove the screws from rear cover.

x5

3. Disconnect cable from the boards.

3-5
3. Disassembly and Reassembly

Description Picture Description Screws

4. Remove the Speaker.

5. Remove Screw from the the boards.

x8

x1

x2

※ Reassembly procedures are in the reverse order of disassembly procedures.

3-6
 5. Exploded View & Part List

5. Exploded View & Part List

5-1. LA22B350F2V Exploded View
M0013

M0174
M0014

M0027
M0215

T0003

T0175

5-1
5. Exploded View & Part List

5-1-1. LA22B350F2V Parts List

Location No. Code No. Description & Specification Q’ty S.A/S.N.A Remark

M0013 BN96-11231C ASSY COVER P-REAR;LB350 22,HIPS,HB,BK500 1 SA

M0014 BN94-02998A ASSY PCB MAIN;LA22B350F2XXZ 1 SA

M0027 BN96-11238A ASSY STAND P-BASE;LB350 22,ABS+PMMA,HB,B 1 SA

M0174 BN44-00302A AC VSS(I);IP-55145T,L650,1.9~2.9mA,8.2~9 1 SA

M0215 BN07-00744A LCD-PANEL;T216HA01-DB,LM216HA,6bit Hi-FR 1 SA

T0003 BN96-11230D ASSY COVER P-FRONT;LB350 22,ABS+PMMA,HB, 1 SA

T0175 BN96-11276A ASSY SPEAKER P;16ohm,4pin,3W,L350 22" 1 SA

5-2
 5. Exploded View & Part List

5-2. LA22B350F2V Parts List

Service Bom (SA: SERVICE AVAILABLE, SNA: SERVICE NOT AVAILABLE)

Level Location No. Code No. Description & Specification Q’ty SA/SNA Remark

0.1 BN90-02234D ASSY COVER FRONT;LB350 22 1 SNA

..2 T0003 BN96-11230D ASSY COVER P-FRONT;LB350 22,ABS+PMMA,HB, 1 SA
...3 M0081 6003-001188 SCREW-TAPTYPE;BH,+,-,B,M4,L10,ZPC(WHT),S 3 SNA
...3 T0069 BN60-00027A SPACER-FELT;42P4A,FELT,L20,BLACK,T0.5,W2 4 SNA
...3 CCM1 BN63-02183D COVER-SHEET;Rhcm,PE Vinyl,T0.04,680mm,20 0.45 SNA
...3 CCM1 BN63-05199J COVER-SHEET;AMBER,PE,T0.08,W105mm,200M,C 2 SNA
...3 M0112 BN63-05882D COVER-FRONT;LB350 22,ABS+PMMA,HB,TBK02,H 1 SNA
...3 AD070 BN64-01116A DECORATION-BOTTOM;LB350 22,ABS,HB,BL35 1 SNA
...3 T0920 BN61-05593B GUIDE-STAND;22B650,ABS HB,BK19 1 SA
...3 M0125 BN96-11522D ASSY BOARD P-TOUCH FUNCTION&IR;SS-PJT,12 1 SA
..2 T0175 BN96-11276A ASSY SPEAKER P;16ohm,4pin,3W,L350 22" 1 SA
0.1 M0002 BN90-02237D ASSY COVER REAR;LB350 22 1 SNA
..2 T0081 6002-001294 SCREW-TAPPING;BH,+,,M4,L16,ZPC(BLK) 3 SA
..2 M0013 BN96-11231C ASSY COVER P-REAR;LB350 22,HIPS,HB,BK500 1 SA
...3 M0113 BN61-01581A BRACKET-VESA;BI17/19BS,SECC,T1.0 2 SNA
...3 M0006 BN63-05910C COVER-REAR;LB350 22,HIPS,HB,BK500 1 SNA
...3 T0071 BN64-01115B INLAY-TERMINAL;LB350,22,CO,PS SHEET,T0.5 1 SNA
...3 T0139 BN65-00002A CLAMPER CORE;BORDEAUX,LDPE,BLK 1 SNA
0.1 M0216 BN90-02240A ASSY STAND;LB350 22 1 SNA
..2 M0027 BN96-11238A ASSY STAND P-BASE;LB350 22,ABS+PMMA,HB,B 1 SA
...3 CCM1 BN63-02183B COVER-SHEET;Rhcm,PE Vinyl,T0.04,150mm,20 0.8 SNA
...3 BN63-05885A COVER-STAND BASE;LB350 22,ABS+PMMA,HB,BK 1 SNA
...3 AR011 BN73-00077A RUBBER FOOT;MATISSE,BUMPON,#13.5,T2.0,60 4 SNA
0.1 BN91-04215D ASSY LCD-CHILIN;BN07-00744A 1 SNA
..2 M0215 BN07-00744A LCD-PANEL;T216HA01-DB,LM216HA,6bit Hi-FR 1 SA
0.1 M0017 BN91-04246A ASSY CHASSIS;LA22B350F2XXZ 1 SNA
..2 M0014 BN94-02998A ASSY PCB MAIN;LA22B350F2XXZ 1 SA
...3 0202-001463 SOLDER-WIRE;LFC2-W3.0,-,D3,99.79Sn/0.2Cu 1.343 SNA
...3 0202-001608 SOLDER-WIRE FLUX;LFC7-107,D0.8,99.3Sn/0. 0.013 SNA
...3 0204-002420 SOLVENT;1M-1000,C3H70H,96 2.92 SNA
...3 0204-002607 FLUX;DF-234U,13%,14KG,Gravity 0.82 1.895 SNA
...3 3701-001480 CONNECTOR-DSUB;15P,3R,FEMAIL,STAMPED PIN 1 SA
...3 HB01A 3711-003846 HEADER-BOARD TO CABLE;BOX,8P,1R,2mm,ANGL 1 SA
...3 PCN1 3711-004712 HEADER-BOARD TO CABLE;BOX,9P,1R,2mm,STRA 1 SA
...3 HB01A 3711-006715 HEADER-BOARD TO CABLE;BOX,4P,1R,2.5mm,AN 1 SNA
...3 JA330 3722-001061 JACK-PHONE;1P,3.6PI,AG,BLK,N 3 SA
...3 JA332 3722-002691 JACK-PIN;2P,Ni,WHT/RED,STRAIGHT 1 SA
...3 JA331 3722-002703 JACK-PIN;3P,Ni,GRN/BLU/RED,STRAIGHT 1 SA
...3 BN97-01987A ASSY HDCP;BN46-00018A,PS-42V6S,D73A,MSTA 1 SNA
....4 BN46-00018A KEY CODE-CERTIFICATE;(HDCP KEY)PPM42M5S, 1 SNA
...3 T0174 BN97-03552A ASSY SMD;LA22B350F2X 1 SNA
....4 0202-001477 SOLDER-CREAM;LST309-M,D20~45um,96.5Sn/3A 0.773 SNA
....4 DS01A 0401-001056 DIODE-SWITCHING;MMBD4148SE,100V,200mA,SO 15 SA
....4 D1 0401-001099 DIODE-SWITCHING;1N4148WS,75V,150mA,SOD-3 4 SA
....4 D0254 0402-000553 DIODE-SCHOTTKY;SS24/B240,40V,2000mA,DO-2 1 SA
....4 0403-000002 DIODE-ZENER;VLZ5V6B,5.45/5.73V,500mW,SOD 1 SA
....4 0403-000771 DIODE-ZENER;VLZ6V2B,5.96-6.27V,500mW,SOD 10 SA
....4 0403-001052 DIODE-ZENER;RD8.2MB,7.7-8.7V,200mW,SOT-2 1 SA

5-3
5. Exploded View & Part List

Level Location No. Code No. Description & Specification Q’ty SA/SNA Remark

....4 D0254 0404-001020 DIODE-SCHOTTKY;BAT54C,30V,200mA,SOT-23,T 2 SA

....4 T0139 0406-001271 DIODE-TVS;RCLAMP0524P,6/-/-V,150W,SLP251 2 SNA
....4 Q101 0501-000445 TR-SMALL SIGNAL;KTC3875S-Y,NPN,150mW,SOT 9 SA
....4 PQ02 0501-002080 TR-SMALL SIGNAL;2SC2412K,NPN,200mW,SC-59 1 SA
....4 CEQ2 0505-000110 FET-SILICON;2N7002,N,60V,115mA,7.5ohm,0. 7 SA
....4 Q409 0505-001165 FET-SILICON;Si3443CDV,P,-20V,+-4.4A,65mo 1 SA
....4 Q409 0505-001170 FET-SILICON;FDS9933A,P,-20V,3.8A,0.075oh 1 SA
....4 1006-001266 IC-LINE TRANSCEIVER;3232,TSSOP,16P,174MI 1 SA
....4 IC112 1103-000129 IC-EEPROM;24C02,2Kbit,256x8,SOP,8P,5x4mm 2 SA
....4 IC112 1103-001385 IC-EEPROM;AT24C256,256Kbit,32Kx8,SOP,8P, 1 SA
....4 1105-001931 IC-DDR2 SDRAM;K4T51163Q,DDR2-800,512Mbit 1 SA
....4 T0085 1201-002487 IC-AUDIO AMP;MAX9728A,QFN,12P,3x3mm,DUAL 1 SA
....4 T0124 1201-002822 IC-POWER AMP;TAS5709,HTQFP,48P,7x7mm,DUA 1 SA
....4 T0087 1203-001815 IC-POSI.FIXED REG.;78M09,TO-252,3P,PLAST 1 SA
....4 T0087 1203-002842 IC-POSI.FIXED REG.;AP1117D-33,TO-252,3P, 2 SA
....4 T0087 1203-002974 IC-POSI.FIXED REG.;AP1117D-25A,TO-252,3P 1 SA
....4 1203-004363 IC-VOL. DETECTOR;RT9818C-29PV,SOT-23,3P, 1 SA
....4 1203-004364 IC-VOL. DETECTOR;RT9818C-42PV,SOT-23,3P, 1 SA
....4 T0170 1203-005463 IC-SWITCH VOL. REG.;MIC2605YML,MLF,8P,2x 1 SA
....4 1203-005538 IC-DC/DC CONVERTER;AOZ1021HAIL,SOP,8P,4. 1 SA
....4 1205-003201 IC-BUS SWITCH;TC7WB125FK,SSOP,8P,2x2.3mm 2 SA
....4 IC109 1205-003695 IC-LCD CONTROLLER;SEMS03-LF,PQFP,296P,32 1 SA
....4 1405-001185 VARISTOR;24Vdc,1.6x0.8x0.36mm,TP 1 SA
....4 1405-001233 VARISTOR;30Vdc,5A,1.6x0.8x0.8mm,TP 8 SA
....4 DR1 2007-000043 R-CHIP;1Kohm,1%,1/10W,TP,1608 2 SA
....4 PR4 2007-000052 R-CHIP;10Kohm,1%,1/10W,TP,1608 2 SA
....4 PR6 2007-000072 R-CHIP;47ohm,5%,1/10W,TP,1608 2 SNA
....4 AR30 2007-000074 R-CHIP;100ohm,5%,1/10W,TP,1608 1 SA
....4 AR150 2007-000078 R-CHIP;1Kohm,5%,1/10W,TP,1608 4 SA
....4 CER04 2007-000084 R-CHIP;4.7Kohm,5%,1/10W,TP,1608 3 SA
....4 MROP1 2007-000090 R-CHIP;10Kohm,5%,1/10W,TP,1608 6 SA
....4 ZPR3 2007-000106 R-CHIP;220Kohm,5%,1/10W,TP,1608 1 SA
....4 R105 2007-000138 R-CHIP;100ohm,5%,1/16W,TP,1005 52 SA
....4 AR49 2007-000140 R-CHIP;1Kohm,5%,1/16W,TP,1005 4 SNA
....4 MR306 2007-000141 R-CHIP;2.2Kohm,5%,1/16W,TP,1005 3 SNA
....4 R319 2007-000143 R-CHIP;4.7Kohm,5%,1/16W,TP,1005 17 SNA
....4 R104 2007-000148 R-CHIP;10Kohm,5%,1/16W,TP,1005 28 SA
....4 HDR2 2007-000151 R-CHIP;15Kohm,5%,1/16W,TP,1005 2 SNA
....4 MR36 2007-000153 R-CHIP;22Kohm,5%,1/16W,TP,1005 6 SNA
....4 MR13 2007-000157 R-CHIP;47Kohm,5%,1/16W,TP,1005 1 SNA
....4 R509 2007-000170 R-CHIP;1Mohm,5%,1/16W,TP,1005 1 SNA
....4 R111 2007-000171 R-CHIP;0ohm,5%,1/16W,TP,1005 34 SNA
....4 HDR17 2007-000172 R-CHIP;10ohm,5%,1/16W,TP,1005 9 SNA
....4 R338 2007-000173 R-CHIP;22ohm,5%,1/16W,TP,1005 22 SNA
....4 UR23 2007-000174 R-CHIP;47ohm,5%,1/16W,TP,1005 10 SNA
....4 MR39 2007-000242 R-CHIP;1.5Kohm,5%,1/16W,TP,1005 1 SNA
....4 KR7 2007-000402 R-CHIP;150ohm,5%,1/10W,TP,1608 1 SA
....4 MR9 2007-000455 R-CHIP;18Kohm,1%,1/10W,TP,1608 1 SA
....4 WR18B 2007-000463 R-CHIP;18ohm,5%,1/10W,TP,1608 4 SA
....4 FR6 2007-000536 R-CHIP;200ohm,1%,1/10W,TP,1608 1 SA
....4 R38 2007-000640 R-CHIP;270ohm,1%,1/10W,TP,1608 1 SA

5-4
 5. Exploded View & Part List

Level Location No. Code No. Description & Specification Q’ty SA/SNA Remark

....4 R19 2007-000763 R-CHIP;330ohm,1%,1/10W,TP,1608 1 SNA

....4 R124 2007-000775 R-CHIP;33Kohm,5%,1/16W,TP,1005 1 SNA
....4 R552 2007-000913 R-CHIP;43Kohm,5%,1/10W,TP,1608 2 SA
....4 DR37 2007-000932 R-CHIP;470ohm,5%,1/16W,TP,1005 5 SNA
....4 2007-001237 R-CHIP;910ohm,1%,1/10W,TP,1608 1 SA
....4 OTR1 2007-001292 R-CHIP;33ohm,5%,1/16W,TP,1005 7 SNA
....4 R326 2007-001325 R-CHIP;3.3Kohm,5%,1/16W,TP,1005 3 SNA
....4 R1 2007-002425 R-CHIP;1ohm,5%,1/10W,TP,1608 6 SNA
....4 TR30 2007-007009 R-CHIP;75ohm,5%,1/16W,TP,1005 8 SNA
....4 R365 2007-007107 R-CHIP;100Kohm,1%,1/16W,TP,1005 4 SNA
....4 DR4 2007-007142 R-CHIP;10Kohm,1%,1/16W,TP,1005 3 SNA
....4 2007-007297 R-CHIP;110ohm,1%,1/10W,TP,1608 1 SA
....4 2007-007319 R-CHIP;390ohm,1%,1/16W,TP,1005 2 SNA
....4 2007-007334 R-CHIP;200Kohm,1%,1/16W,TP,1005 1 SNA
....4 RR17 2007-007549 R-CHIP;4.99Kohm,1%,1/10W,TP,1608 1 SA
....4 R8 2007-007721 R-CHIP;560ohm,1%,1/10W,TP,1608 1 SA
....4 2007-008593 R-CHIP;750ohm,1%,1/16W,TP,1005 1 SA
....4 PRN7 2011-001011 R-NETWORK;10Kohm,5%,1/16W,L,CHIP,8P,TP,3 4 SA
....4 MR38 2011-001093 R-NETWORK;100ohm,5%,1/16W,L,CHIP,8P,TP,3 3 SA
....4 DAR09 2011-001262 R-NETWORK;22ohm,5%,1/16W,L,CHIP,8P,TP,2. 10 SA
....4 AC1 2203-000125 C-CER,CHIP;1.2nF,10%,50V,X7R,TP,1608,- 4 SA
....4 AD480 2203-000181 C-CER,CHIP;100nF,+80-20%,25V,Y5V,TP,2012 1 SA
....4 AC14 2203-000189 C-CER,CHIP;100nF,+80-20%,25V,Y5V,TP,1608 32 SNA
....4 PC43 2203-000233 C-CER,CHIP;0.1nF,5%,50V,C0G,TP,1005 3 SA
....4 C395 2203-000260 C-CER,CHIP;10nF,10%,50V,X7R,2012 1 SNA
....4 C254 2203-000438 C-CER,CHIP;1nF,10%,50V,X7R,TP,1005 7 SA
....4 C507 2203-000489 C-CER,CHIP;2.2nF,10%,50V,X7R,TP,1005 4 SA
....4 MC9 2203-000627 C-CER,CHIP;.022nF,5%,50V,C0G,TP,1005 2 SNA
....4 AC109 2203-000783 C-CER,CHIP;0.33nF,5%,50V,C0G,1608 3 SA
....4 DC25 2203-000812 C-CER,CHIP;.033nF,5%,50V,C0G,1005 3 SA
....4 ZC165 2203-000815 C-CER,CHIP;0.033nF,5%,50V,C0G,1608 6 SA
....4 AD480 2203-000995 C-CER,CHIP;.047nF,5%,50V,C0G,TP,1005 2 SA
....4 AC124 2203-000998 C-CER,CHIP;0.047nF,5%,50V,C0G,1608 1 SNA
....4 AD480 2203-001412 C-CER,CHIP;0.03nF,5%,50V,NP0,TP,1005 2 SNA
....4 MC22R 2203-001596 C-CER,CHIP;2200nF,+80-20%,50V,Y5V,2012 2 SA
....4 C313 2203-001630 C-CER,CHIP;330nF,+80-20%,16V,Y5V,1608 1 SNA
....4 AD480 2203-002285 C-CER,CHIP;10nF,10%,50V,X7R,1005 3 SNA
....4 AD480 2203-002525 C-CER,CHIP;0.56nF,10%,50V,X7R,TP,1005 4 SNA
....4 C178 2203-002793 C-CER,CHIP;1000nF,+80-20%,25V,Y5V,2012 2 SNA
....4 DC108 2203-005005 C-CER,CHIP;100nF,10%,16V,X7R,1608 1 SC
....4 AAC1 2203-005249 C-CER,CHIP;100nF,10%,50V,X7R,TP,1608 10 SNA
....4 TE3 2203-005261 C-CER,CHIP;1000nF,10%,25V,X7R,TP,3216 1 SNA
....4 C410 2203-005384 C-CER,CHIP;4700nF,+80-20%,10V,Y5V,TP,201 10 SNA
....4 AD480 2203-005437 C-CER,CHIP;10000nF,+80-20%,10V,Y5V,3216 1 SNA
....4 AD480 2203-005533 C-CER,CHIP;1000nF,20%,6.3V,X7R,TP,1608 2 SNA
....4 EC9 2203-005834 C-CER,CHIP;22000nF,+80-20%,10V,Y5V,3216 1 SA
....4 AD480 2203-005968 C-CER,CHIP;4.7NF,10%,50V,X7R,TP,1005 3 SNA
....4 AD480 2203-006126 C-CER,CHIP;47nF,10%,16V,X7R,1005 14 SNA
....4 PC11 2203-006141 C-CER,CHIP;1000nF,10%,16V,X5R,1608 5 SNA
....4 C102 2203-006158 C-CER,CHIP;100nF,10%,16V,X7R,1005 24 SNA
....4 AD480 2203-006307 C-CER,CHIP;1000nF,10%,25V,X5R,2012 4 SNA

5-5
5. Exploded View & Part List

Level Location No. Code No. Description & Specification Q’ty SA/SNA Remark

....4 AD480 2203-006336 C-CER,CHIP;10000nF,10%,25V,X5R,3216 2 SA

....4 C125 2203-006361 C-CER,CHIP;10000nF,10%,10V,X5R,TP,2012 15 SC
....4 HDC11 2203-006562 C-CER,CHIP;1000nF,10%,10V,X5R,TP,1005 6 SNA
....4 AD480 2203-006618 C-CER,CHIP;2200nF,+80-20%,16V,Y5V,TP,160 2 SNA
....4 AD480 2203-006681 C-CER,CHIP;100nF,+80-20%,25V,Y5V,1005 18 SNA
....4 AD480 2203-007176 C-CER,CHIP;10000nF,10%,16V,X5R,TP,2012 ( 7 SNA
....4 VL6 2703-000398 INDUCTOR-SMD;10uH,10%,3225 3 SA
....4 T0052 2703-001778 INDUCTOR-SMD;3.3uH,20%,3225 3 SA
....4 T0052 2703-003559 INDUCTOR-SMD;4.7uH,20%,8080 1 SNA
....4 X202 2801-003773 CRYSTAL-SMD;12MHz,30ppm,28-AAN,20pF,50oh 1 SA
....4 F103 2901-001506 FILTER-EMI SMD;5V,0.13A,0pF,2x1x0.5mm,TP 2 SA
....4 DR32 3301-000314 BEAD-SMD;120ohm,1.6x0.8x0.8mm,-,-,- 2 SNA
....4 T0568 3301-001186 BEAD-SMD;600ohm,3216,2500mA,TP,553ohm/93 4 SA
....4 T0568 3301-001236 BEAD-SMD;60ohm,1608 3 SNA
....4 T0568 3301-001404 BEAD-SMD;30ohm,2012,TP,15.9OHM/30MHz 15 SA
....4 AC510 3708-001150 CONNECTOR-FPC/FFC/PIC;30P,1mm,SMD-A,SN,Y 1 SA
....4 T0077 BN41-01238A PCB MAIN;SS-Project,FR-4,4,1.2T,244*157, 1 SNA
....4 M0018 BN97-03571A ASSY MICOM;T-LL3MEAM-1005.7,2009.10.21,N 1 SNA
.....5 1107-001735 IC-NOR FLASH;MX25L3205DM2I-12G,32Mbit,16 1 SNA
....4 DS01A 0401-001049 DIODE-SWITCHING;LS4148,75V,150mA,SOD-80, 6 SA
....4 KR24 2007-000067 R-CHIP;15Kohm,1%,1/10W,TP,1608 2 SNA
....4 C263 2203-000972 C-CER,CHIP;47nF,10%,16V,X7R,1608 2 SA
....4 C745 2203-005171 C-CER,CHIP;1000nF,10%,16V,X7R,2012 2 SNA
....4 3701-001591 CONNECTOR-HDMI;19P,2ROW,FEMALE,SMD-S,AU 1 SNA
....4 R133 2007-007651 R-CHIP;9.1Kohm,1%,1/10W,TP,1608 1 SA
....4 IC012 1203-003700 IC-POSI.ADJUST REG.;LD1117ADT-R,DPAK,3P, 2 SA
...3 CIS3 BN40-00142B TUNER;TCPS3001PD11S(H),TCPS3001PD11S(H), 1 SA
...3 T0066 BN62-00042A HEAT SINK-ES;30*30*5,Ceramic,T1.5,TAPE 1 SNA
0.1 BN91-04247A ASSY SHIELD;LA22B350F2XXZ 1 SNA
..2 T0081 6001-000321 SCREW-MACHINE;FH,+,M3,L10,NI PLT,SWRCH18 2 SA
..2 S.N.A 6003-000269 SCREW-TAPTYPE;BH,+,-,S,M3,L6,ZPC(WHT),SW 8 SNA
..2 M0081 6003-001439 SCREW-TAPTYPE;BH,+,S,M4,L8,ZPC(WHT),SWRC 1 SNA
..2 M0174 BN44-00302A AC VSS(I);IP-55145T,L650,1.9~2.9mA,8.2~9 1 SA
..2 M0251 BN96-02854N ASSY CABLE P;Fininfarina,FLAT CABLE,-,15 1 SA
..2 M0081 6006-001096 SCREW-TAPTYPE;BH,+,WP,B,M4.0,L12,ZPC(BLK 1 SNA
..2 CIS1 0203-001586 TAPE-FILAMENT;#893,0.15,25,55 0.14 SNA
0.1 BN92-05023C ASSY BOX;LB350 22 1 SNA
..2 T0077 BH68-00329D LABEL BAR CODE-02;NO CE,NO WT`Y,MPRII,LA 1 SNA
..2 M0245 BN96-02895A ASSY MISC P-01,HANDLE PACKING;ALL MODEL, 1 SNA
...3 BN66-00007A LEVER-TOP;ALL MODEL,LDPE,WHITE,5.8g 1 SNA
...3 BN66-00008A LEVER-BOTTOM;ALL MODEL,LDPE,WHITE,4.01g 1 SNA
..2 BN69-03902D BOX-SET;22LB350,CB,A-01,SW-55,YEL,W618,D 1 SNA
0.1 BN92-05027G ASSY P/MATERIAL;B350,22 1 SNA
..2 6902-000604 BAG WRAPPING;LDPE,T0.02,W500,L10000,TRP, 1.57 SNA
..2 6902-000609 BAG ROLL;LDPE,T0.05,W2400,L1000,TRP,30.0 0.05 SNA
..2 T0524 6902-000996 BAG PE;HDPE/NITRON,T0.015/T0.5,W800,L600 1 SNA
..2 BH69-00457A PACKING INNER-00,PAD;COMM,OTHER,T3.0,113 1 SNA
..2 BN69-00391D PAD-ANGLE;DI19PS,OTHER,T4,50,2000,YEL 1 SNA
..2 BN69-03565K PAD-PLATE;19LB650,CB,SW,YEL,W1150,D1090, 1 SNA
..2 T0246 BN69-03819A CUSHION-SET;22LB350(S-PJT),EPS,18.2g/l,2 1 SNA
..2 T0603 BN69-00131U PALLET;1703FP-HAS,WOOD,1240,1060,120 1 SNA

5-6
 5. Exploded View & Part List

Level Location No. Code No. Description & Specification Q’ty SA/SNA Remark

..2 T0214 BN74-00008A TAPE-OPP MASKING;OPP-2,T0.05,W100,L800M, 1.54 SNA

0.1 BN92-06479A ASSY LABEL;LA22B350F2VXXZ 1 SNA
..2 BH68-00670A LABEL BOX-COUNTRYWARD;22,26,32B350,MOJO 1 SNA
..2 BH68-00670C LABEL BOX-COUNTRYWARD;22B350,MOJO 90G,58 1 SNA
..2 CCM1 BN68-01176A LABEL RATING;W/W,SS,PET POLYESTER,T0.05, 1 SNA
..2 BN68-03003A LABEL-PRINTING;22MM,50MM,BLACK,WHITE,Pro 2 SNA
..2 BN68-03009A LABEL-POP;10MM,10MM,RED,Product sold in 1 SNA
0.1 ACCE1 BN92-06480A ASSY ACCESSORY;LA22B350F2VXXZ 1 SNA
..2 M0045 BN96-11507A ASSY ACCESSORY-CABLE;LA22B350F2XXZ 1 SA
...3 M0045 BN96-01800C ASSY ACCESSORY;PEONY/ROSE,-,KO,-,-,Witho 1 SNA
....4 T0081 6002-001294 SCREW-TAPPING;BH,+,,M4,L16,ZPC(BLK) 2 SA
....4 6902-000683 BAG ZIPPER;LDPE,T0.05,W60,L60,TRP,4-PE M 1 SNA
...3 T0268 3903-000082 CBF-POWER CORD;DT,CN,IP3/YES(A),3P_Lug,2 1 SA
...3 T0074 BN59-00880A REMOCON;DLP,CRT,TM940,CHINA,39,92g 1 SA
...3 T0527 BN68-00513A LABEL-E,PASS;ALL MODEL,YUPO(110G),50X15, 1 SNA
...3 T0524 6902-001107 BAG PE;LDPE,T0.05,W450,L400,TRP,0,3Separ 1 SNA
...3 BN43-00004A BATTERY;BM1L,BATTERY,MN,600mAh,7.9g 2 SNA
..2 BN96-15056A ASSY ACCESSORY-MANUAL;LA22B350F2VXXZ 1 SNA
...3 T0524 6902-000110 BAG PE;LDPE,T0.05,W250,L400,TRP,28,2,9.2 1 SNA
...3 T0527 AA68-00764A LABEL-PASSING;SAMSUNG ALL,ART PAPER,CLR, 1 SNA
...3 T0527 AA68-02517A LABEL;PJTV(TTSEC),COPPERPLATE,50,75,YELL 1 SNA
...3 T0059 AA68-03184A MANUAL FLYER-CARD-08;ALL MODEL,CHINESE,2 1 SNA
...3 T0527 BN68-00513A LABEL-E,PASS;ALL MODEL,YUPO(110G),50X15, 1 SNA
...3 BN68-02999A MANUAL USERS-IB;Comm,Samsung,SC,China,W/ 1 SNA
...3 BN68-03006A MANUAL FLYER-NAMEPLATE-CARD;LA22B350,Sam 1 SNA
...3 M0254 AA59-00416B ANT SHIELD BOX;UGC-AS-003A,PAL-BG,DK,I,M 1 SA

5-7
 1. Precautions

1. Precautions
1-1. Safety Precautions
Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as
electrical shock.

1-1-1. Warnings
1. For continued safety, do not attempt to modify the circuit board.
2. Disconnect the AC power and DC power jack before servicing.

1-1-2. Servicing the LCD TV

1. When servicing the LCD TV, Disconnect the AC line cord from the AC outlet.
2. It is essential that service technicians have an accurate voltage meter available at all times.
Check the calibration of this meter periodically.

1-1-3. Fire and Shock Hazard

Before returning the LCD TV to the user, perform the following safety checks:
1. Inspect each lead dress to make certain that the leads are not pinched or that hardware is not lodged between the
chassis and other metal parts in the LCD TV.
2. Inspect all protective devices such as nonmetallic control knobs, insulating materials, cabinet backs, adjustment and
compartment covers or shields, isolation resistorcapacitor networks, mechanical insulators, etc.
3. Leakage Current Hot Check (Figure 1-1):
WARNING : Do not use an isolation transformer during this test.
Use a leakage current tester or a metering system that complies with American National Standards Institute (ANSI
C101.1, Leakage Current for Appliances), and Underwriters Laboratories (UL Publication UL1410, 59.7).
(READING SHOULD)
NOT BE ABOVE 0.5mA

LEAKAGE
DEVICE
CURRENT
UNDER
TESTER
TEST

TEST ALL
EXPOSED METAL
SURFACES

2-WIRE CORD

*ALSO TEST WITH

PLUG REVERSED
(USING AC ADAPTER
PLUG AS REQUIRED)
EARTH
GROUND
Figure 1-1. Leakage Current Test Circuit
4. With the unit completely reassembled, plug the AC line cord directly into a 120V AC outlet. With the unit’s AC switch
first in the ON position and then OFF, measure the current between a known earth ground (metal water pipe, conduit,
etc.) and all exposed metal parts, including: metal cabinets, screwheads and control shafts.
The current measured should not exceed 0.5 milliamp.
Reverse the power-plug prongs in the AC outlet and repeat the test.

1-1-4. Product Safety Notices

Some electrical and mechanical parts have special safetyrelated characteristics which are often not evident from visual
inspection. The protection they give may not be obtained by replacing them with components rated for higher voltage,
wattage, etc. Parts that have special safety characteristics are identified by on schematics and parts lists. A substitute
replacement that does not have the same safety characteristics as the recommended replacement part might create
shock, fire and/or other hazards. Product safety is under review continuously and new instructions are issued whenever
appropriate.

1-1
1. Precautions

1-2. Servicing Precautions

WARNING: An electrolytic capacitor installed with the wrong polarity might explode.
Caution: Before servicing units covered by this service manual, read and follow the Safety Precautions section of
this manual.
Note: If unforeseen circumstances create conflict between the following servicing precautions and any of the
safety precautions, always follow the safety precautions.

1-2-1 General Servicing Precautions

1. Always unplug the unit’s AC power cord from the AC power source and disconnect the DC Power Jack before
attempting to:
(a) remove or reinstall any component or assembly, (b) disconnect PCB plugs or connectors, (c) connect a test
component in parallel with an electrolytic capacitor.
2. Some components are raised above the printed circuit board for safety. An insulation tube or tape is sometimes
used. The internal wiring is sometimes clamped to prevent contact with thermally hot components. Reinstall all such
elements to their original position.
3. After servicing, always check that the screws, components and wiring have been correctly reinstalled. Make sure that
the area around the serviced part has not been damaged.
4. Check the insulation between the blades of the AC plug and accessible conductive parts (examples: metal panels,
input terminals and earphone jacks).
5. Insulation Checking Procedure: Disconnect the power cord from the AC source and turn the power switch ON.
Connect an insulation resistance meter (500 V) to theblades of the AC plug.
The insulation resistance between each blade of the AC plug and accessible conductive parts (see above) should be
greater than 1 megohm.
6. Always connect a test instrument’s ground lead to the instrument chassis ground before connecting the positive lead;
always remove the instrument’s ground lead last.

1-3. Electrostatically Sensitive Devices (ESD) Precautions

Some semiconductor (solid state) devices can be easily damaged by static electricity. Such components are commonly
called Electrostatically Sensitive Devices (ESD). Examples of typical ESD are integrated circuits and some field-effect
transistors. The following techniques will reduce the incidence of component damage caused by static electricity.
1. Immediately before handling any semiconductor components or assemblies, drain the electrostatic charge from your
body by touching a known earth ground. Alternatively, wear a discharging wrist-strap device. To avoid a shock hazard,
be sure to remove the wrist strap before applying power to the LCD TV.
2. After removing an ESD-equipped assembly, place it on a conductive surface such as aluminum foil to prevent
accumulation of an electrostatic charge.
3. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ESDs.
4. Use only a grounded-tip soldering iron to solder or desolder ESDs.
5. Use only an anti-static solder removal device. Some solder removal devices not classified as “anti-static” can generate
electrical charges sufficient to damage ESDs.
6. Do not remove a replacement ESD from its protective package until you are ready to install it. Most replacement ESDs
are packaged with leads that are electrically shorted together by conductive foam, aluminum foil or other conductive
materials.
7. Immediately before removing the protective material from the leads of a replacement ESD, touch the protective
material to the chassis or circuit assembly into which the device will be installed.
Caution: Be sure no power is applied to the chassis or circuit and observe all other safety precautions.
8. Minimize body motions when handling unpackaged replacement ESDs. Motions such as brushing clothes together,
or lifting your foot from a carpeted floor can generate enough static electricity to damage an ESD.

1-2
 1. Precautions

1-4. Installation Precautions

1. For safety reasons, more than a people are required for carrying the product.
2. Keep the power cord away from any heat emitting devices, as a melted covering may cause fire or electric shock.
3. Do not place the product in areas with poor ventilation such as a bookshelf or closet. The increased internal
temperature may cause fire.
4. Bend the external antenna cable when connecting it to the product. This is a measure to protect it from being exposed
to moisture. Otherwise, it may cause a fire or electric shock.
5. Make sure to turn the power off and unplug the power cord from the outlet before repositioning the product. Also check
the antenna cable or the external connectors if they are fully unplugged. Damage to the cord may cause fire or electric
shock.
6. Keep the antenna far away from any high-voltage cables and install it firmly. Contact with the highvoltage cable or the
antenna falling over may cause fire or electric shock.
7. When installing the product, leave enough space (0.1m) between the product and the wall for ventilation purposes.
A rise in temperature within the product may cause fire.

1-3
1. Precautions

Memo

1-4
 2. Product specifications

2. Product specifications
2-1. Feature & Specifications
Model LA22B350F2

Feature

� RF, 1-HDMI/DVI, 1-Component, 1-AV, D-sub

� Brightness : 300cd/m2
� Contrast Ratio : 800:1
� Response time : 5ms
� Dynamic contrast, PVA, TN
� PIP(in HDMI 1, Component 1, PC Mode and Sub picture is available only in TV analog mode)

Specifications

Item Description
LCD Panel TFT-LCD panel, T216HA01-DB,RGB vertical stripe, 1366 x 768 pixels,
26-Inch viewable, Normally Black, pixel pitch 0.1165(H) x 0.3495(V) mm
Scanning Frequency Horizontal : 60 kHz ~ 73 kHz (Automatic)
Vertical : 40 Hz ~ 75 Hz (Automatic)
Display Colors 16.7 million colors
Maximum resolution Horizontal : 1366 Pixels
Vertical : 768 Pixels
Input Signal Analog 0.7 Vp-p ± 5% positive at 75Ω , internally terminated
Input Sync Signal H/V Separate, TTL, P. or N.
Maximum Pixel Clock rate 85.5MHz
Active Display
Horizontal/Vertical 477.417(H) x 268.416 (V) mm
AC power voltage & Frequency AC 110V ~ 240V, 50/60Hz
Power Consumption <50W ( < 1W, stand by )
Dimensions
21.9 x 8.0 x 16.7 inchs (557.5 x 202.5 x 484.8 mm)_with stand
Set (W x D x H) 21.9 x 3.5 x 15.3 inchs (557.5 x 88.8 x 387.7 mm)_without stand

Weight (Set) 8.82 lbs (4.0kg)_with stand

8.38 lbs (3.8kg)_without stand
TV System Tuning Frequency Synthesize (Refer to detailed Frequency Table)
System PAL, SECAM, NT4.43,NT3.58
Sound BG, DK, M, I
Environmental Considerations Operating Temperature: 32˚F ~ 122˚F (0˚C ~ 50˚C)
Operating Humidity: 20% ~ 90%
Storage Temperature: -4˚F ~ 140˚F (-20˚C ~ 60˚C)
Storage Humidity: 5% ~ 90%
Audio spec. - MAX Internal Audio Output Power : Right => 5W, Left => 5W
- Equalizer : 5band
- Output Frequency : RF : 20 Hz ~ 15.4 kHz
AV/Componet/HDMI : 20 Hz ~ 20 kHz

2-1
2. Product specifications

Model LA22B450C8

Feature

� RF, 1-HDMI/DVI, 1-Component, 1-AV, D-sub

� Brightness : 300cd/m2
� Contrast Ratio : 800:1
� Response time : 5ms
� Dynamic contrast, PVA, TN
� PIP(in HDMI 1, Component 1, PC Mode and Sub picture is available only in TV analog mode)

Specifications

Item Description
LCD Panel TFT-LCD panel, T216HA01-DB,RGB vertical stripe, 1366 x 768 pixels,
26-Inch viewable, Normally Black, pixel pitch 0.1165(H) x 0.3495(V) mm
Scanning Frequency Horizontal : 60 kHz ~ 73 kHz (Automatic)
Vertical : 40 Hz ~ 75 Hz (Automatic)
Display Colors 16.7 million colors
Maximum resolution Horizontal : 1366 Pixels
Vertical : 768 Pixels
Input Signal Analog 0.7 Vp-p ± 5% positive at 75Ω , internally terminated
Input Sync Signal H/V Separate, TTL, P. or N.
Maximum Pixel Clock rate 85.5MHz
Active Display
Horizontal/Vertical 477.417(H) x 268.416 (V) mm
AC power voltage & Frequency AC 110V ~ 240V, 50/60Hz
Power Consumption <50W ( < 1W, stand by )
Dimensions
21.9 x 6.8 x 16.6 inchs (557.8 x 171.9 x 422.9 mm)_with stand
Set (W x D x H) 21.9 x 3.2 x 15.1 inchs (557.8 x 81.3 x 384.2 mm)_without stand

Weight (Set) 9.33 lbs (4.24kg)_with stand

8.81 lbs (4.0 kg)_without stand
TV System Tuning Frequency Synthesize (Refer to detailed Frequency Table)
System PAL, SECAM, NT4.43,NT3.58
Sound BG, DK, M, I
Environmental Considerations Operating Temperature: 32˚F ~ 122˚F (0˚C ~ 50˚C)
Operating Humidity: 20% ~ 90%
Storage Temperature: -4˚F ~ 140˚F (-20˚C ~ 60˚C)
Storage Humidity: 5% ~ 90%
Audio spec. - MAX Internal Audio Output Power : Right => 5W, Left => 5W
- Equalizer : 5band
- Output Frequency : RF : 20 Hz ~ 15.4 kHz
AV/Componet/HDMI : 20 Hz ~ 20 kHz

2-2
 2. Product specifications

CHANNEL FREQUENCY TABLE

1. OUTPUT FREQUENCY : ANALOG fv:45.75MHz, fs:41.25MHz DIGITAL Fc:44MHz
2. TUNING STEP SIZE : FIRST PLL 250KHz SECOND PLL 62.5KHz

OSD CH NO AIR CH NO CH NO CH NO
Air-DTV Air-NTSC BAND Cable STD BAND Cable HRC Cable IRC
1 1 A-8 72. 00 A-8 73. 25
2 2 57 55. 25 V-L 2 55. 25 V-L 2 54. 00 2 55. 25
3 3 63 61.25 V-L 3 61.25 V-L 3 60.00 3 61.25
4 4 69 67.25 V-L 4 67.25 V-L 4 66.00 4 67.25
5 5 79 77. 25 V-L 5 77. 25 V-L A-7 78. 00 A-7 79. 25
6 6 85 83.25 V-L 6 83.25 V-L A-6 84.00 A-6 85.25
7 7 177 175. 25 V-H 7 175. 25 V-H 7 174. 00 7 175. 25
8 8 183 181.25 V-H 8 181.25 V-H 8 180.00 8 181.25
9 9 189 187.25 V-H 9 187.25 V-H 9 186.00 9 187.25
10 10 195 193.25 V-H 10 193.25 V-H 10 192.00 10 193.25
11 11 201 199.25 V-H 11 199.25 V-H 11 198.00 11 199.25
12 12 207 205.25 V-H 12 205.25 V-H 12 204.00 12 205.25
13 13 213 211.25 V-H 13 211.25 V-H 13 210.00 13 211.25
14 14 473 471. 25 UHF A 121. 25 MID A 120. 00 A 121. 25
15 15 479 477.25 UHF B 127.25 MID B 126.00 B 127.25
16 16 485 483.25 UHF C 133.25 MID C 132.00 C 133.25
17 17 491 489.25 UHF D 139.25 MID D 138.00 D 139.25
18 18 497 495.25 UHF E 145.25 MID E 144.00 E 145.25
19 19 503 501.25 UHF F 151.25 MID F 150.00 F 151.25
20 20 509 507.25 UHF G 157.25 MID G 156.00 G 157.25
21 21 515 513.25 UHF H 163.25 MID H 162.00 H 163.25
22 22 521 519.25 UHF I 169.25 MID I 168.00 I 169.25
23 23 527 525.25 UHF J 217. 25 SUPER J 216. 00 J 217. 25
24 24 533 531.25 UHF K 223.25 SUPER K 222.00 K 223.25
25 25 539 537.25 UHF L 229.25 SUPER L 228.00 L 229.25
26 26 545 543.25 UHF M 235.25 SUPER M 234.00 M 235.25
27 27 551 549.25 UHF N 241.25 SUPER N 240.00 N 241.25
28 28 557 555.25 UHF O 247.25 SUPER O 246.00 O 247.25
29 29 563 561.25 UHF P 253.25 SUPER P 252.00 P 253.25
30 30 569 567.25 UHF Q 259.25 SUPER Q 258.00 Q 259.25
31 31 575 573.25 UHF R 265.25 SUPER R 264.00 R 265.25
32 32 581 579.25 UHF S 271.25 SUPER S 270.00 S 271.25
33 33 587 585.25 UHF T 277.25 SUPER T 276.00 T 277.25
34 34 593 591.25 UHF U 283.25 SUPER U 282.00 U 283.25
35 35 599 597.25 UHF V 289.25 SUPER V 288.00 V 289.25
36 36 605 603.25 UHF W 295.25 SUPER W 294.00 W 295.25
37 37 611 609.25 UHF AA 301.25 HYPER AA 300.00 AA 301.25
38 38 617 615.25 UHF BB 307.25 HYPER BB 306.00 BB 307.25
39 39 623 621.25 UHF CC 313.25 HYPER CC 312.00 CC 313.25
40 40 629 627.25 UHF DD 319.25 HYPER DD 318.00 DD 319.25
41 41 635 633.25 UHF EE 325.25 HYPER EE 324.00 EE 325.25
42 42 641 639.25 UHF FF 331.25 HYPER FF 330.00 FF 331.25
43 43 647 645.25 UHF GG 337.25 HYPER GG 336.00 GG 337.25
44 44 653 651.25 UHF HH 343.25 HYPER HH 342.00 HH 343.25
45 45 659 657.25 UHF II 349.25 HYPER II 348.00 II 349.25
46 46 665 663.25 UHF JJ 355.25 HYPER JJ 354.00 JJ 355.25
47 47 671 669.25 UHF KK 361.25 HYPER KK 360.00 KK 361.25
48 48 677 675.25 UHF LL 367.25 HYPER LL 366.00 LL 367.25
49 49 683 681.25 UHF MM 373.25 HYPER MM 372.00 MM 373.25
50 50 689 687.25 UHF NN 379.25 HYPER NN 378.00 NN 379.25
51 51 695 693.25 UHF OO 385.25 HYPER OO 384.00 OO 385.25
52 52 701 699.25 UHF PP 391.25 HYPER PP 390.00 PP 391.25
53 53 707 705.25 UHF QQ 397.25 HYPER QQ 396.00 QQ 397.25
54 54 713 711.25 UHF RR 403.25 HYPER RR 402.00 RR 403.25
55 55 719 717.25 UHF SS 409.25 HYPER SS 408.00 SS 409.25
56 56 725 723.25 UHF TT 415.25 HYPER TT 414.00 TT 415.25
57 57 731 729.25 UHF UU 421.25 HYPER UU 420.00 UU 421.25
58 58 737 735.25 UHF VV 427.25 HYPER VV 426.00 VV 427.25
59 59 743 741.25 UHF WW 433.25 HYPER WW 432.00 WW 433.25
60 60 749 747.25 UHF XX 439.25 HYPER XX 438.00 XX 439.25
61 61 755 753.25 UHF YY 445.25 HYPER YY 444.00 YY 445.25
62 62 761 759.25 UHF ZZ 451.25 HYPER ZZ 450.00 ZZ 451.25
63 63 767 765.25 UHF AAA 457.25 HYPER AAA 456.00 AAA 457.25
64 64 773 771.25 UHF BBB 463.25 HYPER BBB 462.00 BBB 463.25
65 65 779 777.25 UHF CCC 469.25 ULTRA CCC 468.00 CCC 469.25
66 66 785 783.25 UHF DDD 475.25 ULTRA DDD 474.00 DDD 475.25
67 67 791 789.25 UHF EEE 481.25 ULTRA EEE 480.00 EEE 481.25
68 68 797 795.25 UHF FFF 487.25 ULTRA FFF 486.00 FFF 487.25
69 69 803 801.25 UHF GGG 493.25 ULTRA GGG 492.00 GGG 493.25

2-3
2. Product specifications

OSD CH NO AIR CH NO CH NO CH NO
Air-DTV Air-NTSC BAND Cable STD BAND Cable HRC Cable IRC
70 70 HHH 499.25 ULTRA HHH 498.00 HHH 499.25
71 71 III 505.25 ULTRA III 504.00 III 505.25
72 72 JJJ 511.25 ULTRA JJJ 510.00 JJJ 511.25
73 73 KKK 517.25 ULTRA KKK 516.00 KKK 517.25
74 74 LLL 523.25 ULTRA LLL 522.00 LLL 523.25
75 75 MMM 529.25 ULTRA MMM 528.00 MMM 529.25
76 76 NNN 535.25 ULTRA NNN 534.00 NNN 535.25
77 77 OOO 541.25 ULTRA OOO 540.00 OOO 541.25
78 78 PPP 547.25 ULTRA PPP 546.00 PPP 547.25
79 79 79 553.25 ULTRA 79 552.00 79 553.25
80 80 80 559.25 ULTRA 80 558.00 80 559.25
81 81 81 565.25 ULTRA 81 564.00 81 565.25
82 82 82 571.25 ULTRA 82 570.00 82 571.25
83 83 83 577.25 ULTRA 83 576.00 83 577.25
84 84 84 583.25 ULTRA 84 582.00 84 583.25
85 85 85 589.25 ULTRA 85 588.00 85 589.25
86 86 86 595.25 ULTRA 86 594.00 86 595.25
87 87 87 601.25 ULTRA 87 600.00 87 601.25
88 88 88 607.25 ULTRA 88 606.00 88 607.25
89 89 89 613.25 ULTRA 89 612.00 89 613.25
90 90 90 619.25 ULTRA 90 618.00 90 619.25
91 91 91 625.25 ULTRA 91 624.00 91 625.25
92 92 92 631.25 ULTRA 92 630.00 92 631.25
93 93 93 637.25 ULTRA 93 636.00 93 637.25
94 94 94 643.25 ULTRA 94 642.00 94 643.25
95 95 A-5 91. 25 FM A-5 90. 00 A-5 91. 25
96 96 A-4 97.25 FM A-4 96.00 A-4 97.25
97 97 A-3 103.25 FM A-3 102.00 A-3 103.25
98 98 A-2 109.25 MID A-2 108.00 A-2 109.25
99 99 A-1 115.25 MID A-1 114.00 A-1 115.25
100 100 100 649. 25 ULTRA 100 648. 00 100 649. 25
101 101 101 655.25 ULTRA 101 654.00 101 655.25
102 102 102 661.25 ULTRA 102 660.00 102 661.25
103 103 103 667.25 ULTRA 103 666.00 103 667.25
104 104 104 673.25 ULTRA 104 672.00 104 673.25
105 105 105 679.25 ULTRA 105 678.00 105 679.25
106 106 106 685.25 ULTRA 106 684.00 106 685.25
107 107 107 691.25 ULTRA 107 690.00 107 691.25
108 108 108 697.25 ULTRA 108 696.00 108 697.25
109 109 109 703.25 ULTRA 109 702.00 109 703.25
110 110 110 709.25 ULTRA 110 708.00 110 709.25
111 111 111 715.25 ULTRA 111 714.00 111 715.25
112 112 112 721.25 ULTRA 112 720.00 112 721.25
113 113 113 727.25 ULTRA 113 726.00 113 727.25
114 114 114 733.25 ULTRA 114 732.00 114 733.25
115 115 115 739.25 ULTRA 115 738.00 115 739.25
116 116 116 745.25 ULTRA 116 744.00 116 745.25
. . . . . . . . .
. . . . . . . . .
125 125 125 799.25 ULTRA 125 798.00 125 799.25
. . . . . . . . .

2-4
 2. Product specifications

2-2. Specification Comparison to Old Models

Model B350(LA22B350F2) / B450(LA22B450C8) Coral (LA22A450C)

Design

Display Type LCD TV LCD TV

Built-in Tuner O O

Resolution 1366 x 768 1366 x 768

LCD Panel TFT LCD Panel 50Hz TFT LCD Panel 50Hz

Screen Size 22” 22”

Picture ratio 16 : 9 16 : 9

Dimensions (W x H x D) 21.9 x 16.7 x 8.0 inchs_with stand 22.0 x 17.2 x 8.5 inchs_with stand

B350 : 8.82 lbs_with stand

Weight B450 : 9.33 lbs_with stand
14.33 lbs_with stand

Brightness 300 nit 400 nit

Contrast Ratio 800:1 800:1

Picture Enhacer DNIe(Lola3) DNIe (FBE3)

Equalizer O O

Auto Motion Plus 100Hz X X

Surround Sound 2 Way SRS TruSurround Dolby Digital 3 Way SRS TruSurround Dolby Digital

Speaker Output 3W + 3W 3W + 3W

Antenna 1 1

2-5
2. Product specifications

2-3. Accessories
Product Description Code. No Remark

BN59-00869A (BRAZIL)
BN59-00880A (CHINA)
Remote Control & Batteries BN59-00888A
(AAA x 2) (M/EAST ASIA)
BN59-00889A
(LATIN AMERICA)

Power Cord 3903-000172

Owner’s Instructions BN68-02101L

Samsung Electronics
Service center

Warranty Card / Registration

Card / Safety Guide Manual AA68-03184A
(Not available in all locations)

Stand Screw x 2 6002-001294

B350 : BN96-11238A
Stand
B450 : BN96-11887A

2-6
 4. Troubleshooting

4. Troubleshooting
4-1. Troubleshooting
1. Check the various cable connections first.
• Check to see if there is a burnt or damaged cable.
• Check to see if there is a disconnected or loose cable connection.
• Check to see if the cables are connected according to the connection diagram.
2. Check the power input to the Main Board.
Check internal Pattern lola3 if fhere is some picture noise.
Factory mode(Info-MENU-Mute-power on → Advanced menu → MST69A84HQ → Pattern select : Off
Press right button of Remocon.
If lola3 NG, Chahge the Main Board.

4-1
4. Troubleshooting

4-1-1. No Power

- The LEDs on the front panel do not work when connecting the power cord.
Symptom - The SMPS relay does not work when connecting the power cord.
- The units appears to be dead.

The IP relay or the LEDs on the front panel does not work when connecting the power cord if the cables are
improperly connected or the Main Board or SMPS is not functioning. In this case, check the following:
Major - Check the internal cable connection status inside the unit.
checkpoints - Check the fuses of each part.
- Check the output voltage of SMPS.
- Replace the Main Board.

LA22B350F2 LA22B450C8

LAMP off, power indicator No

Check a connection a power cable.
LED red color?
Yes
Diagnostics Does proper DC5V appear at
1 No Change a Assy PCB Power.
pin 6 of CN1001?
Yes

Does proper DC A3.3V No Check a IC1106

2
appear at R1111? Change a main PCB ass’y
Yes

Does proper DC A2.5V, A1.2V appear at No Check a IC1105, IC1107

3 Change a main PCB ass’y
R1110, C1116?

Yes

4 A power is supplied to set?

Caution Make sure to disconnect the power before working on the IP board.

4-2
 4. Troubleshooting

4-1-2. No Video (Analog PC signal)

Symptom - Audio is normal but no picture is displayed on the screen.

- Check the PC source

Major - Check the M-star
checkpoints
- This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected.

LA22B350F2 LA22B450C8

Power Indicator is off.

Lamp on, no video.
Yes

Check a PC source and check Input a analog PC signal and

No connected cable(DPMS).
the connection of DSUB cable?
Diagnostics Yes

Does the signal appear at R4059,

No PC cable change a PC cable.
1 R4058, R4056, R4061,
Change a main PCB ass’y.
R4060(R,G,B,H,V) of IC4000?
Yes

Does the digital data appear at the No Check a IC4000.

2
output of LVDS Cable? Change a main PCB ass’y

Yes

Check a LVDS cable?

3
Replace a lcd panel?
Yes

Please, Call to Samsung Co. LTD.

Caution Make sure to disconnect the power before working on the IP board.

4-3
4. Troubleshooting

WAVEFORMS

1 R,G,B Output Signal

4-4
 4. Troubleshooting

4-1-3. No Video (HDMI - Digital Signal)

Symptom - Audio is normal but no picture is displayed on the screen.

- Check the HDMI source

Major
- Check the M-star
checkpoints
- This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected.

LA22B350F2 LA22B450C8

Power Indicator is off.

Lamp on, no video.
Yes

Check the connection Input a HDMI cable.

1 No
of HDMI cable?
Yes
Diagnostics
No Check a IC4000.
Does the digital data appear at Change a main PCB ass’y.
2 R4065~R4072?

Yes

3 Does the digital data appear at No Check a IC4000.

output of LVDS Cable? Change a main PCB ass’y.

Yes

Check the LVDS cable?

Replace the LCD panel?

Yes

Please, Contact Tech support

Caution Make sure to disconnect the power before working on the IP board.

4-5
4. Troubleshooting

WAVEFORMS

2 Digital Output Data

3 Signal of HDMI(Data)

4-6
 4. Troubleshooting

4-1-4. No Video (Tuner_CVBS)

Symptom - Audio is normal but no picture is displayed on the screen.

- Check the Tuner CVBS source

Major
- Check the M-star
checkpoints
- This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected.

LA22B350F2 LA22B450C8

Power Indicator is off. No Connect the RF cable and

Lamp on, no picure. check RF signal.
Yes

No Check a B+ voltage (#2 of Tuner) 5V,

Does the signal appeat #8 of TU2400?
Diagnostics change a main PCB ass’y.
Yes

Does the Signal appear at C4022

No Change a main PCB ass’y.
of IC4000?

Yes

Check the LVDS cable?

Replace the LCD panel?

Yes

Please, Call to Samsung Co. LTD.

Caution Make sure to disconnect the power before working on the IP board.

4-7
4. Troubleshooting

WAVEFORMS

3 CVBS Output Signal

4 Tuner_CVBS Output Signal

4-8
 4. Troubleshooting

4-1-5. No Picture (Video_CVBS)

Symptom - Audio is normal but no picture is displayed on the screen.

- Check the Video Source

Major
- Check the M-star
checkpoints
- This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected.

LA22B350F2 LA22B450C8

Power Indicator is off. No

Lamp on, no picture. Check a A/V cable and video signal.
Diagnostics
Yes

1 Does the signal appear at C4025 of No

Check a connection harness.
IC4000?

Yes

2 Check a LVDS cable ?

Replcelcd panel?

Yes

Please, Call to Samsung Co. LTD.

Caution Make sure to disconnect the power before working on the IP board.

4-9
4. Troubleshooting

WAVEFORMS

4 CVBS Output Signal

4-10
 4. Troubleshooting

4-1-6. No Sound

Symptom - Audio is normal but no picture is displayed on the screen.

- Check the RF Source

Major
- Check the M-star
checkpoints
- This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected.

LA22B350F2 LA22B450C8

Picture is display, no sound. No Connect a sound cable.

control a volume.
Diagnostics Yes

No Check a connection harness and

Does the signal appear at R2109,
headphone jack/side AV.
1 R2107,R2108(AUSD,AUWS,AUSCK)
Check Sound Processor
of IC2100?
IC6003(M-star)
Yes

2 Check the DC 13V No Check a B13V Line.

appear at C2112 of IC2100? Change a main PCB ass’y

Yes

Replace the speaker ass’y?

Caution Make sure to disconnect the power before working on the IP board.

4-11
4. Troubleshooting

WAVEFORMS

6 The Signal are Inputed to IC1201

7 The Signal are Inputed to IC1202

4-12
 4. Troubleshooting

4-2. Alignments and Adjustments

4-2-1. General Alignment Instuction
1. Usually, a color LCD-TV needs only slight touch-up adjustment upon installation.
Check the basic characteristics such as height, horizontal and vertical sync.
2. Use the specified test equipment or its equivalent.
3. Correct impedance matching is essential.

4. Avoid overload. Excessive signal from a sweep generator might overload the front-end
of the TV. When inserting signal markers, do not allow the marker generator to distort test result.

5. Connect the TV only to an AC power source with voltage and frequency as specified on
the backcover nameplate.

6. Do not attempt to connect or disconnect any wire while the TV is turned on. Make sure
that the power cord is disconnected before replacing any parts.

7. To protect against shock hazard, use an isolation transformer.

4-13
4. Troubleshooting

4-3. Factory Mode Adjustments

4-3-1 Entering Factory Mode
To enter ‘Service Mode’ Press the remote -control keys in this sequence :
- If you do not have Factory remote - control

INFO MENU MUTE Power on

- If you have Factory remote - control

PICTURE ON DISPLAY FACTORY

- The buttons are active in the service mode.

1. Remote - Control Key : Power, Arrow Up, Arrow Down, Arrow Left
Arrow Right, Menu, Enter, Number Key(0~9)
2. Function - Control Key : Power, CH +, CH -, VOL +, VOL -,
Menu, TV/VIDEO(Enter)

4-3-2 Panel Check

You have to check Panel Maker Because of different adjustments as follows.
First of all, Check the label rating!

1) Label Rating File

- LCD PANEL MARK
A:ACER(AUO) S : SEC C : CMO

* If not printed you could consider S(sec) panel mark.

4-14
 4. Troubleshooting

4-3-3 Factory Data

 Option

Option Factory Reset OPTION RANGE

Type 32D_AG 22D_T,22I_T,22L_T,26D_AG, 26L_AG, 32L_AG,
32D_AG, 37L_AG, 40L_AG, 32A_AG_F, 32L_AG_F,
32D_AG_F, 32I_AG_F, 37L_AG_F, 37D_AG_F, 40A_
AG_F, 40L_AG_F, 40D_AG_F, 46A_AG_F, 46L_AG_F,
46D_AG_F, 32A_AG_FF, 32L_AG_FF, 32D_AG_FF,
40A_AG_FF, 40L_AG_FF, 40D_AG_FF, 46A_AG_FF,
46D_AG_FF, 52A_AG_FF, 52L_AG_FF
Model B550_FBE PB350, PB430, PB450, PB550, PB550_FBE, L_
BASIC, LB350, LB360, LB360_22, LB450, LB450_22,
LB460, LB480, LB480_22, LB530, LB550, B550_FBE,
LB622, LB550_FBE_NM
Tuner Select SEMCO SEMCO, XUGUANG
DDR Samsung Samsung
Ch Table SUWON SUWON, SESK, SHE, TTSEC, SEIN, SDMA, TSED,
SAVINA, SIEL, TSE
Local Set East Asia Vietnam, Philippines, China, India, Iran, Israel, Middle
Asia, East Asia, Thailand, Africa
P&P Language English English, China, French, Arabic, Persia, Hebrew,
Russian
PDP Group P55A_50SP P55A_50SP

 ADC/WB

ADC AV Calibration Success Success/Failure

Comp Calibration Success Success/Failure
PC Calibration Success Success/Failure
HDMI Calibration Success Success/Failure

ADC Target 1st_AV_Low 17 0 ~ 255

1st_AV_High 234 0 ~ 255
1st_AV_Delta 3 0 ~ 255
1st_Comp_Low 17 0 ~ 255
1st_Comp_High 234 0 ~ 255
1st_Comp_Delta 3 0 ~ 255
1st_PC_Low 1 0 ~ 255
1st_PC_High 235 0 ~ 255
1st_PC_Delta 3 0 ~ 255
2nd_Low 2 0 ~ 255
2nd_High 235 0 ~ 255
2nd_Delta 1 0 ~ 255

4-15
4. Troubleshooting

ADC Result 1st_AV_Gain 132 0 ~ 255

1st_AV_Offset 139 0 ~ 255
1st_Comp_Gain 67 0 ~ 255
1st_Comp_Gain_Cb 67 0 ~ 255
1st_Comp_Gain_Cr 67 0 ~ 255
1st_Comp_Offset 128 0 ~ 255
1st_Comp_Offset_Cb 128 0 ~ 255
1st_Comp_Offset_Cr 128 0 ~ 255
1st_PC_R_Gain 85 0 ~ 255
1st_PC_G_Gain 85 0 ~ 255
1st_PC_B_Gain 86 0 ~ 255
1st_PC_R_Offset 140 0 ~ 255
1st_PC_G_Offset 142 0 ~ 255
1st_PC_B_Offset 142 0 ~ 255
2nd_R_Offset 57 0 ~ 255
2nd_G_Offset 57 0 ~ 255
2nd_B_Offset 57 0 ~ 255
2nd_R_Gain 114 0 ~ 255
2nd_G_Gain 114 0 ~ 255
2nd_B_Gain 0 ~ 255

WB Sub Brightness 128 0 ~ 255

Red Offset 128 0 ~ 255
Green Offset 128 0 ~ 255
Blue Offset 128 0 ~ 255
Sub Contrast 128 0 ~ 255
Red Gain 128 0 ~ 255
Green Gain 128 0 ~ 255
Blue Gain 128 0 ~ 255

4-16
 4. Troubleshooting

 Control

EDID EDID Protect On On/Off

EDID Type L13_1920_1080 P12_1024_768, P13_1024_768,
P12_1366_768, P13_1366_768,
P12_1920_1080, P13_1920_1080,
L12_1366_768, L13_1366_768,
L12_1920_1080, L13_1920_1080
EDID Write(0x4D,0) L13_1920_1080 P12_1024_768, P13_1024_768,
SUCCESS P12_1366_768, P13_1366_768,
P12_1920_1080, P13_1920_1080,
L12_1366_768, L13_1366_768,
L12_1920_1080, L13_1920_1080

Sub Option Video Mute Time 8 0~99

Inch 32” 19, 22, 23, 26, 27, 32, 37, 40, 42, 46, 50, 52, 57
Dimm Type EXT EXT, INT, INT_NEG,EXT_POS, EXT_NEG
D.Gamma Off Off, 0.85, 0.88, 0.90, 0.93, 0.95, 0.98, M1, M2, M3, M4
Anynet+ On On/Off
TTX On On/Off
TTX List Flof Flof/List
TTX Group Lang OSD “Lang OSD, W Europe, E Europe, Russia,
Greek, Turkey, Arab, Farsi, ArabHbrw”
Carrier Mute Off On/Off
High Devi Off On/Off
Volume Curve EA EA, INDIA
NT Conversion Off On/Off
Auto Power On On/Off
LVDS Format DEFAULT DEFAULT, VESA, JEIDA
LNA Menu Off On/Off
WatchDog Off On/Off
Bus Stop
Panel Auto Setting
HotPlug On On/Off
HotPlugCtrl On On/Off
HotPlugDelay 12 0~63
USB Upgrade Off On/Off
Spread Spectrum

Spread Spectrum Spread Spectrum On On/Off

Step 1 30 0~255
Step 2 9 0~255
Range 1 0 0~255
Range 2 44 0~255
FBE SSC 5 On/Off

 PDP Option

PDP Option PDP Filter

4-17
4. Troubleshooting

 Hotel Option

Hotel Option Hotel Mode Off On/Off

 Shop Option

Shop Option Shop Mode Off On/Off

 Sound

SOUND Detection Threshold OPTION RANGE

Pilot Threshold M2S Thr High 2 0~255

M2S Thr Low 144 0~255
S2M Thr High 1 0~255
S2M Thr Low 176 0~255
Carrier1 Threshold Amp On Thr High 2 0~255
Amp On Thr Low 0 0~255
Amp Off Thr High 1 0~255
Amp Off Thr Low 0 0~255
NSR On Thr High 16 0~255
NSR On Thr Low 0 0~255
NSR Off Thr High 32 0~255
NSR Off Thr Low 0 0~255
Carrier2 Threshold Amp On Thr High 2 0~255
Amp On Thr Low 0 0~255
Amp Off Thr High 1 0~255
Amp Off Thr Low 0 0~255
NSR On Thr High 13 0~255
NSR On Thr Low 0 0~255
NSR Off Thr High 24 0~255
NSR Off Thr Low 0 0~255
FM Prescale 23 0~40
AM Prescale 22 0~40
NICAM Prescale 33 0~40
FM M Prescale 23 0~40
SC1 Vol 16 0~40
SC2 Vol 16 0~40
Audio Delay Normal 8 0~255
Audio Delay Game 8 0~255
Num Of Check 10 0~60
Stereo Cnt 10 0~60
MP3 Level 0 0~60
Ext Volume Scale 2 0~100
R2E Scart2 Offset 2 0~40
NTP Master Volume 32 0~48
NTP PWM Modulation 254 0~255
NTP DRC Thresh1 55 0~127
NTP DRC Thresh2 80 0~127
NTP Speaker EQ On On/Off

4-18
 4. Troubleshooting

 MST69A84HQ

VDEC SYNC_LVL 255 0~255

HPLL_MD 0 0~1
HPLL_SPD1 16 0~63
HPLL_SPD2 32 0~255
CBCRLP_MD 1 0~3
YC_DLY 1 0~3
IFCOMP 0 0~63
SAT_ADJ 128 0~255
YSEPFLT 7 0~7
NOISE_LVL 0 0~255

Film Det Speed NT 80 0~255

IPC/MJC
Film Det Speed PAL 80 0~255
Motion Hist 5 0~7
Motion History 3 0~7

Color Space Red Sat 25 0~30

Red Hue 64 0~127
Green Sat 34 0~30
Green Hue 127 0~127
Blue Sat 37 0~30
Blue Hue 80 0~127
Cyan Sat 37 0~30
Cyan Hue 80 0~127
Magenta Sat 25 0~30
Magenta Hue 64 0~127
Yellow Sat 23 0~30
Yellow Hue 64 0~127
FWC Blue 21 0~30
FWC Red 21 0~30

4-19
4. Troubleshooting

 FBE

FBE Pattern Select 0~25

B-Slope Gain 0~255
B-Tilt Min 0~255
B-Tilt Max 0~255
LFuc-Basis 0~255
HFuc-Basis 0~255
Mean-Offset1 0~255
Mean-Offset2 0~255
Mean-Slope 0~255
ACR Offset 0~127
ACR Th1 0~255
ACR Th2 0~255
Skin Enable 0~255
Skin Uv 0~255
Mskin Uv 0~255
Sub Color 0~255
Msub Color 0~255

 WB Movie

WB Movie WB Moive Off On/Off

Color Mode Movie Dynamic, Standard, Movie
Color Tone Cool Cool, Normal, Warm1, Warm2
Msub Brigh 128 0~255
Msub Contr 128 0~255
W1_RGAIN 138 0~255
W1_BGAIN 109 0~255
W1_ROFFS 128 0~255
W1_BOFFS 128 0~255
W2_RGAIN 144 0~255
W2_BGAIN 84 0~255
W2_ROFFS 128 0~255
W2_BOFFS 128 0~255
NO_RGAIN 134 0~255
NO_BGAIN 109 0~255
NO_ROFFS 128 0~255
NO_BOFFS 128 0~255
Movie_Contr 100 0~100
Movie_Brigh 45 0~100
Moive_Color 55 0~100
Moive_Sharp 75 0~100
Moive_Tint 50 0~100
Mv BkLight 10 0~10
M.Gamma Off -5~5
M.S.Gamma -3 -3~3

4-20
 4. Troubleshooting

 EPA Standard

EPA Standard Std Contr 95 0~100

Std Bright 45 0~100
Std Sharp 40 0~100
Std Color 50 0~100
Std Tint 50 0~100
Std Backlight 7 0~10

 Adjust

Adjust Dynamic Dimming Off On/Off

Dynamic CE

Dynamic CE Off On/Off

B Slope Off On/Off

LNA Plus RF Db 0 Level 3 0~255

RF Db 1 Level 8 0~255
RF Db 2 Level 13 0~255
RF Db 3 Level 25 0~255

Megazine LNA Off On/Off

UART Select Off On/Off
Debug Mode Normal Normal, NONE,
BackEndMute Off MSTAR, Run Time
PixelShift Test Off On/Off
Hp Detect High On/Off
????? High/Low
PDP FRC On
Visual Test Off On/Off
On/Off

4-21
4. Troubleshooting

 YC_Delay

YC Delay PAL BG 1 0~3

PAL DK 1 0~3
PAL I 1 0~3
SECAM BG 4 0~7
SECAM DK 4 0~7
SECAM L 4 0~7
NTSC 358 1 0~3
NTSC 443 1 0~3
AV PAL 0 0~3
AV SECAM 4 0~7
AV NT358 1 0~3
AV NT443 1 0~3
AV PAL60 1 0~3

 Sharpness

Sharpness H1 Gain 44 0~63

H2 Gain 8 0~63
H3Gain 8 0~63
H4 Gain 8 0~63
V1 Gain 48 0~63
V2 Gain 8 0~63
H Overshoot B1 16 0~255
H Overshoot B2 16 0~255
V Overshoot B5 16 0~255
V Overshoot B8 16 0~255
H Undershoot B1 16 0~255
H Undershoot B2 16 0~255
V Undershoot B5 16 0~255
V Undershoot B8 16 0~255
Coring TH2 1 0~15
Coring TH1 1 0~15

4-22
 4. Troubleshooting

 PE

PE Skin X 0 0~11
Skin Y 0 0~11
B Slope 160 0~255
DLC ML 96 0~255
DLC_MH 160 0~255
DLC_H 240 0~255
Skin_SAT 0 0~15
Skin_Hue 0 0~127
M_Skin_Hue 0
M_Skin_X 0 0~11
M_Skin_Y 0 0~11
Mid_color_level 176 0~255
M_Mid_color_level 176 0~255

 EEPROM Reset

EEPROM Reset EEPROM Reset OK

NVR All Clear Off On/Off

 Defect Log

LogList1
Defect Log
LogList2
LogList3

4-23
4. Troubleshooting

4-4. White Balance - Calibration

4-4-1 White Balance -Calibration

1. Calibration AV Calibration
Comp Calibration
PC Calibration
HDMI Calibration

4-4-2 Service Adjustment - You must perform Calibration in the Lattice Pattern before adjusting the White Balance.
 Color Calibration
Adjust spec.
1. Source : HDMI
2. Setting Mode : 1280*720@60Hz
3. Pattern : Pattern #24 (Chess Pattern)

( Chess Pattern )

4. Use Equipment : CA210 & Master MSPG925 Generator

- Use other equipment only after comparing the result with that of the Master equipment.

Input mode Calibration Pattern

CVBS IN (Model_#1) Perform in NTSC B&W Pattern #24 Lattice
Component IN (Model_#6) Perform in 720p B&W Pattern #24 Lattice
Perform in VESA XGA (1024x768)
PC Analog IN (Model_#21) Lattice
B&W Pattern #24
HDMI IN Perform in 720p B&W Pattern #24 Lattice

<Table 1>

4-24
 4. Troubleshooting

 Method of Color Calibration (AV)

1) Apply the NTSC Lattice (N0. 3) pattern signal to the AV IN 1 port
2) Press the Source key to switch to “AV1” mode
3) Enter Service mode
4) Select the “Calibration” menu
5) Select the “AV Calibration” menu.
6) In “AV Calibration Off” status, press the “ ” key to perform Calibration.
7) When Calibration is complete, it returns to the high-level menu.
8) You can see the change of the “AV Calibration” status from Failure to Success.

 Method of Color Calibration (Component)

1) Apply the 720p Lattice (N0. 6) pattern signal to the Component IN 1 port
2) Press the Source key to switch to “Component1” mode
3) Enter Service mode
4) Select the “Calibration” menu
5) Select the “Comp Calibration” menu.
6) In “Comp Calibration Off” status, press the “ ” key to perform Calibration.
7) When Calibration is complete, it returns to the high-level menu.
8) You can see the change of the “Comp Calibration” status from Failure to Success.

 Method of Color Calibration (PC)

1) Apply the VESA XGA Lattice (N0. 21) pattern signal to the PC IN port
2) Press the Source key to switch to “PC” mode
3) Enter Service mode
4) Select the “Calibration” menu
5) Select the “PC Calibration” menu.
6) In “PC Calibration Off” status, press the “ ” key to perform Calibration.
7) When Calibration is complete, it returns to the high-level menu.
8) You can see the change of the “PC Calibration” status from Failure to Success.

 Method of Color Calibration (HDMI)

1) Apply the 720p Lattice (N0. 6) pattern signal to the HDMI1/DVI IN port
2) Press the Source key to switch to “HDMI1” mode
3) Enter Service mode
4) Select the “Calibration” menu
5) Select the “HDMI Calibration” menu.
6) In “HDMI Calibration Off” status, press the “ ” key to perform Calibration.
7) When Calibration is complete, it returns to the high-level menu.
8) You can see the change of the “HDMI Calibration” status from Failure to Success.

4-25
4. Troubleshooting

4-4-3 White Balance - Adjustment

(low light) (hight light)

Sub Bright Sub Contrast

5. W/B
R offset R gain
G offset G gain
B offset B gain

(W/B adjustment Condition refer next page)

4-5. HOW TO UPGRADE

4-5-1 Software Upgrade (MSTAR ISP Tool)
 MSTAR ISP TOOL

4-26
 6. Wiring Diagram

6. Wiring Diagram
6-1. Wiring Diagram

LIPS Board
Speaker
Function

T- CON + FRC
LOLA3
Speaker

6-1
6. Wiring Diagram

COMP1 / AV1 INPUT (CN3300) PC INPUT(CN3200) POWER and Dimming(CN1001)

1 GND 1 PC_RED 1 GND
2 COMP_SR_IN 2 PC_GREEN 2 A13V
3 COMP_SL_IN 3 PC_BLUE 3 GND
4 GND 4 GND 4 GND
5 COMP_SL_IN 5 GND 5 GND
6 COMP_SR_IN 6 GND 6 A5V
7 GND 7 A5V
(CN3301) 8 GND 8 B3.3VD
9 PC_5V 9 B5V
1 GND
10 PC_IDENT
2 IDENT_AV
11 GND
3 COMP_Y
12 SDA_TXD
4 GND
13 PC_H_SYNC
5 IDENT_COMP
14 PC_V_SYNC
6 COMP_PB
15 SCL_RXD
7 GND
8 COMP_PR
HDMI Connection (CN3100)
9 COMP_PR
1 HDMI_RX2+
PC/DVI SOUND INPUT(JA3400) 2 GND
3 HDMI_RX2-
1 GND
4 HDMI_RX1+
2 PC_SR_IN
5 GND
3 PC_SL_IN
6 HDMI_RX1-
4 PC_SL_IN
7 HDMI_RX0+
5 PC_SL_IN
8 GND
6 PC_SR_IN
9 HDMI_RX0-
7 PC_SR_IN
10 HDMI_RXCLK+
11 GND
12 HDMI_RXCLKHDMI_
13 CEC
14 GND
15 HDMI_DDC_SCL
16 HDMI_DDC_SDA
17 GND
18 HDMI_5V / IDENT_HDMI
19 HDMI_5V / IDENT_HDMI
20 GND
21 GND

6-2
 6. Wiring Diagram

6-2. Wiring Picture

LA22B350F2

LA22B450C8

6-3
6. Wiring Diagram

6-3. Connector Functions

Connector Functions

CN1001 <-> SMPS Supply dimming power from SMPS to Main Board.
* defective symptom : abnormal Picture

CN2001 <-> Speaker Connection Main Board and Speaker.

* defective symptom : No picture

CN5401 <-> Function & IR Connection Main Board and Function & IR Assy.
* defective symptom : No picture, diable Power On/Off

CN5200 <-> T-CON The LVDS signal transferred from Main Board to Panel.
* defective symptom : No picture but normal sound

6-4. Cables
Use (1) LVDS CONNECTOR (2) ASSY-SPEAKER (3) IR to FUNCTION
Code BN96-02854N BN96-11276A (350 only) BN96-11522B (350 only)

Photo

Use (4) ASSY-SPEAKER (5) IR to FUNCTION

Code BN98-06823J BN96-07270U (450 only)

Photo

6-4