Scribd
Upload
28 views3 pages

Setting Mikrotik Upk Paket 1 K13

This document provides instructions for configuring two Mikrotik routers, Router A and Router B. Router A is configured with an internet connection on interface eather1_WAN and a LAN on interface eather2_LAN. Router B is configured as an access point using interface wlan1 and connects to Router A's LAN via interface eather1. Key configurations for both routers include IP addresses, DHCP, firewall NAT, OSPF routing, and bandwidth limiting. The document also describes testing internet and network connectivity between devices as well as the configured access restrictions.

Uploaded by

Aditya Fajar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
28 views3 pages

Setting Mikrotik Upk Paket 1 K13

This document provides instructions for configuring two Mikrotik routers, Router A and Router B. Router A is configured with an internet connection on interface eather1_WAN and a LAN on interface eather2_LAN. Router B is configured as an access point using interface wlan1 and connects to Router A's LAN via interface eather1. Key configurations for both routers include IP addresses, DHCP, firewall NAT, OSPF routing, and bandwidth limiting. The document also describes testing internet and network connectivity between devices as well as the configured access restrictions.

Uploaded by

Aditya Fajar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

KONFIGURASI SOAL UPK MIKROTIK PAKET 1 K 13

CONFIGURASI ROUTER A

1. Buka aplikasi Winbox – klik mac address – klik connect


2. Reset Configurasi : Sistem – klik reset configuration – ceklist no default configuration – klik
Reset configuration – Yes
3. Setting Identity : System –klik Identity – tulis router A – klik Applay – klik 0k
4. Setting Interface : klik Interface – ganti nama eather 1 dengan eather1_WAN – applay – ok –
ganti nama eather 2 dengan eather2_ LAN – klik applay – klik ok
5. Setting IP DHCP Client :klik IP – klik DHCP Client – klik tanda plus – pilih interface = internet –
klik applay – klik ok Kalau status belum bound – klik 2 kali hasil konfigurasi DHCP –klik
enable( Jawaban soal no 5.b.1 Router A)
6. Setting IP Address :klik iP – Address – klik tanda plus - addres tulis ip 200.50.3.1/28 – klik
Interface pilih eather 2_LAN – klik applay – klik ok ( Jawaban soal 5.a.1 Router A)
7. Cek ip dari ISP di IP route :klik IP – klik Routes ( Jawaban soal 5.b.234)
8. Setting IP DNS : klik IP – klik DNS – Server di tulis 8.8.8.8 – centang Allow Remote Request – klik
applay – klik ok
9. Setting IP Firewall :klik IP – klik Firewall – klik Nat – klik tanda Plus – klik General – Chain = srcnat
– Out Interface = Internet – Action = Masquerede – klik Applay – klik ok
10. Setting IP komputer : klik Change adapter Option – klik kanan Ethernet – klik properties – klik
internet protocol versi 4 – pilih use the following IP Addres – isi IP Address = 200.50.3.2 –
subnetmask = 255.255.255.240 – Default Getway = 200.50.3.1(ip router) – Prefered DNS Server
= 8.8.8.8 – klik ok
11. Cek ketersambungan komputer ke router : tulis cmd – tulis ping 200.50.3.1 – enter harus replay
( Jawaban soal 10 router A)
12. Cek ketersambungan ke internet : cmd – tulis ping www.google.com – enter harus replay

13. Setting Routing OSPF : klik Routing – klik OSPF – klik Network – klik tanda plus – klik Network =
tulis ip network eather1_WAN – area = backbone – klik applay – klik ok – klik tanda plus – klik
network = ip network eather2_LAN – area = backbone – klik applay – klik ok 9 Jawaban soal 6.a
Router A )
14. Setting Block Sittus http :klik Ip – klik web proxy – centang enable – port = 3128 – cache
administrator = nama [email protected] - klik applay – klik accses – klik tanda plus – dst
host = linux.or.id – action = deny – klik applay – klik ok ( Jawaban soal no 7.12345 Router A)
15. Setting Block Sittus http : klik Ip – web proxy – centang enable – port = 3128 – ceklist
Anonymous – cache administrator = nama [email protected] – centang cache On Disk -
klik applay – klik accses – klik tanda plus – dst host = ftp.vsudo.co – action = deny – klik applay
– klik ok ( Jawaban soal no 7.12345 Router A)
16. Setting Ip Firewall :klik IP – Firewall – tanda plus – general – chain = dstnat – protocol = 6 (tcp) –
dst port = 80 – in interface = eather 2_LAN – action = redirect – to port = 3128 – klik applay – klik
ok
17. Setting IP Firewall :klik IP – klik Firewall – klik Nat – klik tanda plus – klik general – chain = srcnat
– out interface = eather 1_WAN – Action = masquerade – klik applay – klik ok
18. Setting Banwitdh : klik Queues – klik simple queues – klik tanda plus – name = limit 64k – target
pilih eather 2_LAN – Target Downloud = 64k – Target Uploud = 64k – klik applay – klik ok
( Jawaban soal no 8 Router A)
19. Cek traffic hasil limit banwitdh : klik 2 kali hasil limit – traffic…..trafic sesuai limit
20. Cek hasil block sittus : buka google masuk ke web sittus yang di block jika berhasil akan mencul
tulisan ERROR FORBIDEN atas nama peserta.
CONFIGURASI ROUTER B

1. Buka aplikasi Winbox – klik mac address – klik connect


2. Reset Configurasi : Sistem – klik reset configuration – ceklist no default configuration – klik
Reset configuration – Yes
3. Setting Identity : System –klik Identity – tulis router B – klik Applay – klik 0k
4. Setting Wireless : Klik Interface – klik Wlan – klik centang biru – double klik wlan1 – klik wireless
– mode = ap bridge – band = 2GHz-B/G – SSID = nama peserta@wifi – klik applay – klik ok
5. Setting IP DHCP Client :klk IP – klik DHCP Client – klik tanda plus – klik interface = eather 1 –
default route = no – klik applay – klik ok
6. Setting IP Address :klik IP – address = 200.50.3.49/28 – interface = wlan1 – klik applay – klik ok
7. Setting IP route : klik IP – klik Routers – klik tanda plus – klik getway = tulis ip internet di router
A – klik applay- klik ok
8. Setting IP DNS : klik IP – DNS – Servers = 8.8.8.8 – centang Allow Remote Request – klik applay –
klik ok
9. Setting IP Firewall :klik IP – klik Firewall – klik Nat – klik tanda plus – klik general – chain = srcnat
– out interface = eather 1 – Action = masquerade – klik applay – klik ok
10. Setting IP DHCP Server : klik IP – klik DHCP server – klik DHCP setup – klik DHCP server interface
= Wlan1 – klik next – DHCP Address space – klik next – Getway for DHCP network – klik next –
Address give out = ganti IP pool 200.50.3.50 – 200.50.3.61 – klik next – DNS Server = 8.8.8.8 &
200.50.3.33 – klik next – Lease time = 06.00.00 – klik next ( Jawaban soal 5.c.1234 Router B )
11. Setiing Routing :klik Routing – klik OSPF – klik Network – klik tanda plus – klik network = ip
network eather 1 – area = backbone – klik applay – klik ok – klik tanda plus- klik network = ip
network Wlan – area = backbone – klik applay – klik ok ( Jawaban soal 6.b Router B)
12. Cek ketersambungan routing antara router A & B : klik IP – Routers
13. Limit Banwidth = klik Queues – klik simple queues – klik tanda plus – name = limit 32k – Target =
pilih Wlan – Target Uploud = 32k – Target Downloud = 32k – klik applay - klik ok ( Jawaban soal
no 9 Router B )
14. Cek Ketersambungan Wlan ke internet ,Wlan ke HP,router ke internet,router ke router,blokir
situs,LAN ke Internet,cek limit banwidt,cek routing dari router A ke B

You might also like