Independent periodic health inspection - TM2500(+)
Turnaround time: Estimated working time is approx. 40 hours
Turnaround time in days of 10 hours each:
with provision of 1 mechanical engineer: 4 days
with provision of 2 mechanical engineers: 2 days
Independent periodic health inspections surpass traditional periodic or
borescope inspections:
Fully independent perspective (especially important with engines
under warranty)
Dedicated improved work scope based on extensive VBR expertise &
experience in:
optimizing reliability & availability TM engines
preventing & reducing unscheduled downtime TM engines
optimizing total lifetime TM engines
optimizing safe operation environments
Very cost effective: improved work scope at a competitive pricing
Tailor-made recommendations based on customer business model &
operating profile
All recommendations and reports available 24/7 through your VBR Turbine
Partners customer portal access (+ full service history upon request)
About VBR
VBR Turbine Partners are independent technical & digital maintenance
experts for LM aeroderivative gas turbines and their control systems.
LM2500+ | LM6000 | TM2500+ | PGT25+ | Speedtronic | Woodward | DECIDE
We support TM operators worldwide to improve their reliability, availability &
maintainability and to reduce their day-to-day operation & maintenance costs
in a sustainable way.
Contact details Independent periodic
VBR Turbine Partners
Main office & warehouse
health inspection
Industrieweg Oost 6
TM2500(+)
6662 NE Elst
The Netherlands
+31 88 010 9030
[email protected] www.vbr-turbinepartners.com version: 1.2
Workscope TM2500 TM2500
SAC SAC SAC SAC SAC SAC
+ + + +
G4 G4
Borescope inspection T4.8/T5.4 inspection
High pressure compressor (using electronic turning tool) Visual inspection
Combustor and Stage 1 HPT Nozzle Resistance check
High pressure turbine (using electronic turning tool)
P4.8/P5.4 visual inspection
Stage 1 mid span damper inspection
Hydraulic control unit filter inspection (HCU)
GG/GT visual exterior inspection
Sight glasses cleaning
Tubing, hoses and electrical harnesses
Inlet duct and centerbody
Transfer gearbox
Igniter visual inspection
Accessory gearbox
Compressor front frame
High pressure recoup check (running engine)
Compressor stator and variable vane components
Compressor rear frame Bearing 7b thrust balance check (running enine)
Turbine mid frame
Power turbine stator case VSV schedule check (running engine)
Turbine rear frame
Accessories Pneumatic/gas starter inspection
GT mounts (if applicable for client configuration)
Compressor inlet inspection Supply and scavenge lube filter inspection
Filter house
Silencers
Gas y-strainer inspection
(if installed)
Inlet plenum
Non-return valve inspection
Engine enclosure inspection (if applicable for client configuration)
Exhaust inspection Gas turbine starter oil return line screen inspection
Exhaust duct inspection (if applicable for client configuration)
PT stage 6 blade inspection
Diffusor inspection
Lube and scavenge pump inspection
L&S pump inlet screens will be inspected
(Magnetic) plug or chip detector inspection
Synthetic lube oil analysis
Fuel system visual inspection
Fuel nozzle visual inspections
Two fuel nozzles will be removed for visual inspection
Tip wear measurements
