(@® smoke = smoke: is a major step forward in the design of smoke detector testers. All other pressurized aerosol smoke alarm testers have the inherent drawback that, if misused, they have harmful residue on the casing and/or inside the chamber of the detector. This residue can discolor the detector plastic, can attract dust, affect sensitivity and, in some cases, leads to corrosion, cracking or even complete failure of the detector. Residue occurs when testing aerosols are used too close to the detector, or smoke alarm, despite instructions not to do so. smoke. is the solution to problems previously associated with aerosol smoke detector testers. @ LISTED LISTED@) smoke ' emokesabre cannot be used too close to the detector and eliminates harmful residue while focusing and targeting the canned smoke test gas, ‘When smokesabre is in the closed position the sabre prevents access to the spray button. The aerosol can only be activated when the sabre is fully extended. n use, air is drawn through the holes in the sabre and this, coupled with the venturi effect involved, assists the velocity and vaporization process of the airborne ‘smoke! particles. The result is a more effective test, delivering better detector activation, using less gas per test, and reducing costs while eliminating harmful residue. ‘Other products may be recommended as best used with accessory devices to prevent spraying t00 close. With smokesabre there is, rho choice, The sabre is part of the product and cannot be used without smokesabre is a universal test product covering the sensitivity range ofall smoke detectors (see particle size compatison chart) The extending sabre is made of 100% bo-degradable paste making smokesabre the only smoke detector test aerosol to be both recyeiable and Eco‘riendy. mh " ssmokesabre is UL and ULC listed, meets global Particle Size Comparison testing standards, ands approved by malor smoke 0.00014 100} detector manulacurers For futher information viet www-emokesabr = I com smoke “te detectors shal be tested in place to ensure smoke. eit into the sensing chamber and alarm response" ti ortaia NFPA 72 Chapter 14 (14.4.2 (g)) ach detector shal be tested for operation by invading smoke or slated smoke nto the detecting chamber x= “Le fonetonnement de chaque étectour de fume doit étre vertié parlintroduction de fumée ou de fumée a=» Simulae dans la chambre de detecton,conformement ax instructions du fabnicant CANIULC-9536-04, 57.4.1.2 .001ym 001m — Gym tm tym = ‘Professional Smoke Detector Testers vith approved and ised dispensers ‘Genuine Professional Heat Detector Testers sultabl for thed temperature, rate o tise and combined detectors {CO Detector Testers vt approved and ised dispenser ‘Aerosol Dispensing Tools as recommended by detector manutacturers iad ‘Detector Removal Tools sultabl forall leading makes and model of detector Z ‘Access Poles to enable detector maintenance up to 30+ ‘Complete Maintenance and Service providing complete solutions in economical and convenient Kit formats ‘Smoke Detector Sensitivity instruments Toldentty sensitivity dit and help ensure that smoke detector sensitivity is maintained ‘thi dines callbration parameters