LNCTGROUP OF COLLEGES, BHOPAL LCT
wo ". twAnisl(. t1
Assignment-I
I Year, AICTE Flexible Curricula, Based on CO No.1
Engineering Chemistry
(BT-101)
Date of giving Assignment shet:
Date of submission of Assignment sheet:
UNIT I
Q.1 Define Hardness. Explain why hard water does not give lather with soap?
Q.2 Howcan alkalinity of water be determined?
Q.3 100 mL of a water sample on titration with N/50 HCl required 20 mL of the
acid to phenolphthalein end point. After this, methyl orange indicator was
added and further acid required was 15mL. Calculate type and extent of
alkalinity present in the water sample.
Q.4 Give a survey report on type of water supplied and problems faced in your
colony
UNIT II
Q.I Discuss causes, effects and removal of the following:
a) Scale and sludge
b) Caustic Embrittlement
Q.2 Give a comparative account of Zeolite and lime soda method.
Q.3 Calculate the amount of lime (84% pure) and soda (92%% pure) in kg for
softening of 300000 L of hard water using 32.8 ppm of sodium aluminate as
a coagulant. The impurities present in water are as follows: Ca" =
240 ppm
Mg" 96 ppm; HCO; 732 ppm; CO2
= =
44 ppm ; and NaCl =
20 ppm.
Department. Of Engineering Chemistry
LNCT GROUP OF COLLEGES, BHOPAL LNCT -
Assignment-Il
I Year, AICTE Flexible Curricula, Based on CO No. 2
Engineering Chemistry
(BT-101)
Date of giving Assignment sheet:
Date of submission of Assignnment sheet:
UNIT III
Q.1 Differentiate between Hydrodynamic and Boundary lubrication
Q.2 How can we determine the cloud and pour point of any sample oil?
Q.3 Describe the testing and significance of the following:
a) Flash and Fire point (by Abel's Apparatus)
b) SEN
Q.4 Which type of oil is used in engines of cars for lubrication? Give all
specifications of engine oil which makes it apt for such engines.
Department. Of Engineering Chemistry
LNCT GROUP OF COLLEGES, CT
BHOPAL OLLE
Assignment-II
I Year, AICTE Flexible Curricula, Based on CO No. 3
Engineering Chemistry
(BT-101)
Date of giving Assignment sheet:
Date of submission of
Assignment sheet:
UNIT IV
Q.1 Explain briefly with reactions the ionic mechanism
of polymerization.
Q.2 Distinguish between Thernmoplastic and Thermosetting polymers.
Q.3 Give preparation.properties and uses of PTFE and Bakellite.
Q.4Discuss the industrial applications of biodegradable polymers.
Department. OfEnginecring Chemistry
SAM
LNCT GROUP OF
COLLEGES, BHOPAL
Cr
Assignment-IV
I Year, AlCTE Flexible Curricula, Based on CO No. 4
Engineering Chemistry
(BT-101)
Date of giving
Assignment sheet:
Date of submission of
Assignment sheet:
UNIT V
Q.1 What is phase diagram? Discuss the phase diagram of one component
system.
Q.2 What is the
significance of finding eutectic point. Explain eutectic point by
taking Cu-Ag System as an
example.
Q.3 Explain with a diagram the mechanism of wet
corrosion.
Q.4 What type of Eutectic alloy is used in Fire
Sprinkler System? What are the
various applications of eutectic alloys.
Department. Of Engineering Chemistry
LNCT GROUP OF
COLLEGES, IBHOPAL L CIr
Assignment-V
I Year, AICTE Flexible Curricula, Based on CO No. 5
Engineering Chemistry
(BT-101)
Date of giving Assignment sheet:
Date of submission of
Assignment sheet:
UNIT VII
Q.1Discuss vibrational modes in AB type of molecule.
Q.2 Discuss the different electronic transitions
which takes place in UV-Visible
region.
Q.3 What is Infrared
Spectroscopy? Discuss the instrumentation and applications
of Infrared Spectroscopy.
Q. 4
Illustrate and mention the
type of spectroscopy used for the detection of
following:i.Coloured complexes and Concentration of unknown solution.
ii. Hydrogen bonding.
ii. Purity of Sample
UNIT VII
Q. 1 Explain the variations in s.p,d and forbital energies in periodic table.
Q.2.Whal is the difference between electron affinity and
electronegativity?
Q.3 Write a note
onpolarizability. Mention factors aflecting polarization.
Department. Of Engineering Chemistry
