Scribd
Upload
371 views1 page

APE Model D36-26 Single Acting Diesel Impact Hammer

This document provides specifications for the APE Model D36-26 Single Acting Diesel Impact Hammer. The hammer has a maximum rated energy of 89,303 ft-lbs at Setting 4 and can achieve strokes up to 157 inches. It weighs 17,150 lbs including the trip device. It runs on diesel or bio-diesel fuel and has a fuel tank capacity of 17.7 gallons. Optional accessories include a drive base assembly and variable throttle control.

Uploaded by

Jorge Reyes Aguilar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
371 views1 page

APE Model D36-26 Single Acting Diesel Impact Hammer

This document provides specifications for the APE Model D36-26 Single Acting Diesel Impact Hammer. The hammer has a maximum rated energy of 89,303 ft-lbs at Setting 4 and can achieve strokes up to 157 inches. It weighs 17,150 lbs including the trip device. It runs on diesel or bio-diesel fuel and has a fuel tank capacity of 17.7 gallons. Optional accessories include a drive base assembly and variable throttle control.

Uploaded by

Jorge Reyes Aguilar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

APE Model D36-26 Single Acting Diesel Impact Hammer

MODEL D36-26 (3.6 metric ton ram)


D36-26 Finishing Dolphin Piles. SPECIFICATIONS
Stroke at maximum rated energy 135 in (343 cm)
Maximum rated energy (Setting 4) 89,303 ft-lbs (120.56 kNm)
Setting 3 80,372 ft-lbs (108.50 kNm)
Setting 2 66,084 ft-lbs (89.21 kNm)
Minimum rated energy (Setting 1) 44,651 ft-lbs (60.28 kNm)
(V

Maximum obtainable stroke 157 in (381 cm)


Maximum obtainable energy 103,855 ft-lbs (141 kNm)
Speed (blows per minute) 34-53

WEIGHTS (Approximate)
Ram 7,938 lbs (3,600 kg)
Anvil 1,358 lbs (616 kg)
Anvil cross sectional area 367.94 in² (2373.80 cm²)
Hammer weight (includes trip device) 17,150 lbs (7,779 kg)
Typical operating (weight with DB26 and H-beam insert) 19,802 lbs
(8,982 kg)

CAPACITIES
Fuel tank (runs on diesel or bio-diesel) 17.7 gal (67 liters)
Oil tank 5 gal (19 liters)

CONSUMPTION
Optional Variable Throttle Control. Diesel or Bio-diesel fuel 2.64 gal/hr (10 liters/hr)
Lubrication 0.26 gal/hr (1 liters/hr)
Grease 8 to 10 pumps every 20 minutes of operation time.

STRIKER PLATE FOR DB 26


Weight 628 lbs (284 kg)
Diameter 22.5 in (57.15 cm)
Area 398 in² (2567.74 cm²)
Thickness 6 in (15.24 cm)

CUSHION MATERIAL
Type/Qty Micarta / 2 each
Diameter-DB26 22.5 in (57.15 cm)
Thickness 1 in (25.4 mm)

Type/Qty Aluminum / 3 each


Drive Base Assembly. Thickness 1/2 in (12.7 mm)
Diameter 22.5 in (57.15 cm)
Total Combined Thickness 3.5 in (8.89 cm)
Area 398 in² (2567.74 cm²)
Elastic-modulus 285 ksi (1,965 mpa)
Coeff. of restitution 0.8

DRIVE CAP
DB 26: 1,076 lbs (488 kg)

INSERT WEIGHT
H-Beam insert for 12” (305 mm) and 14” (355 mm): 948 lbs (430 kg)
Large pipe insert for sizes 12” to 24” diameter: 1,830 lbs (830 kg)

MINIMUM BOX LEAD SIZE/OPERATING LENGTH


Minimum box leader size 8 in x 26 in (20.32 cm x 66 cm)
Operating length as described above 354 in (900 cm)
IVING E
DR
CAN PILE

QU

7032 South 196th


Visit our WEB site:
IPMENT

Kent, Washington 98032 USA


(800) 248-8498 & (253) 872-0141 www.apevibro.com
RI

(253) 872-8710 Fax e-mail: [email protected]


,

IN
C. AME

You might also like