0% found this document useful (0 votes)
160 views3 pages

DIR-825 Orange GUI Firmware Upgrade Guide

This document provides instructions for updating the firmware on a DIR-825 router. It advises downloading the latest firmware file from the provided link, checking that the correct file is used to avoid bricking the router. It then outlines connecting to the router via a web browser at 192.168.0.1, logging in with the default or custom credentials, navigating to the firmware update page, selecting the downloaded file, and allowing the 2 minute update process to complete followed by a router restart. It concludes by verifying the new firmware version and contacting support if needed.

Uploaded by

dkjvkzjdv
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
160 views3 pages

DIR-825 Orange GUI Firmware Upgrade Guide

This document provides instructions for updating the firmware on a DIR-825 router. It advises downloading the latest firmware file from the provided link, checking that the correct file is used to avoid bricking the router. It then outlines connecting to the router via a web browser at 192.168.0.1, logging in with the default or custom credentials, navigating to the firmware update page, selecting the downloaded file, and allowing the 2 minute update process to complete followed by a router restart. It concludes by verifying the new firmware version and contacting support if needed.

Uploaded by

dkjvkzjdv
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

DIR - 825 Firmware Upgrade Setup Guide.

You can download the latest firmware for the above-mentioned router from the link below:
ftp://ftp.d-link.co.za/DIR/dir825%20(new)/firmware/G1_OrangeGui/DIR-
825%20G1_v7.01WWB01.bin

Note: If you use the wrong firmware you might brick your router and void the warranty.

Connect with cable to the DIR -825


Once you are connected open your web browser (Internet Explorer, Google Chrome and Firefox).
Type 192.168.0.1 and press Enter.

Default Credentials:
Username: admin
Password: Left Blank (During Configuration a Password Change might have been required , Please
Type in the Password you Chose During the configuration)

After entering the username and password click “Login”.


You will be directed to the main menu. See below screenshot.

In the top right-hand corner, you will see “Firmware Version”.

Go to “Tools” then on the left side you’ll see “Firmware”, click on it.
Now browse to the new firmware file you have downloaded and click “Upload”.
The firmware upgrade should take about 2 minutes, the router will restart during the firmware
upgrade process.
Once the firmware upgrade is done, log into the router and just verify what the firmware version is
on.

If you experience any problems with the router please contact D-Link Technical Support:
Email: [email protected]
Telephone: 0127412000

You might also like