TECHNICAL SPECIFICATIONS – SK12
Rig
SK12
Manufacturer: SKYTOP
Rig type: SKYTOP RR 300
Mounted on IVECO carrier
Prepared M. Doc. ref.: DO-077
by: Launay Date revised: 19/03/2019 1 of 14
Revision: A
TECHNICAL SPECIFICATIONS – SK12
Prepared M. Doc. ref.: DO-077
by: Launay Date revised: 19/03/2019 2 of 14
Revision: A
TECHNICAL SPECIFICATIONS – SK12
DERRICK SKYTOP BREWSTER
Type Single storage
Guy lines Internal guy lines, no external
API capacity 73 T
DERRICK STORAGE
Type Single DP and R2 tubing storage; single SR storage
Tubing storage capacity 2200 m 2 7/8 tbg.1800 m 3 ½ tbg
Sucker rod storage ¾’’ SR: 2200 m
RIG WINCH SKYTOP RR 300
Type Skytop HI 3808-38
Motor GM 6V92 T
Engine power 350 HP
Main winch cable 1’’ crossover straight EIPS, Working load 49T, coeff 5, 6-strand sheaving
Winch weighting cable 9/16’’ non-rotating on reel with max capacity 3000 m.
GENERATORS
Quantity 2
Power 80 kVA and 175 kVA
Distribution 80 kVA generator for living quarters and rig,
175 kVA generator for mud unit and BOP battery unit
Electrical cabinets 1 independent for each generator
POWER SWIVEL
Type BOWEN S 2.5 C
Capacity 45 short tons at 100 rpm
Control panel independent at foreman's position with torque control
Power unit GM6-71 motor
BOP/BATTERY UNIT
Annular BOP 7 1/16’’ - 3000 and 11’’ - 3000
Ram BOP 7 1/16’’ - 3000 double
Manifold 2’’ - 3000 psi
Battery unit BISON 4 batteries
Skid test stump with adapted testing shafts
GARDNER DENVER PUMPING UNIT
Configuration Mounted on low-bed trailer
Type (triplex) PAHBFC with pistons
MAX pressures 120 bar (4”) / 95 bar (4”½)
MAX displacement 700 L/min (4”) / 850 L/min (4”½)
MUD UNIT
Tanks Max capacity 3 * 30 m3
Characteristics Agitators, mixing unit with 1 hopper on tank 2, Commenté [DI1]: coquille dans la source: "hooper" au
lieu de "hopper"
ADDITIONAL EQUIPMENT
• Set of trailers for transporting bungalows, miscellaneous equipment, pump unit
• 19 T crane platform with 3 T 000 capacity crane
• IVECO rig carrier (total rolling weight 38 T 000) with five-year Category 1 permit
• Adjustable work floor on carrier
• 2 7/8 class 2 drill pipe, total 800m
• Lifting, handling equipment
• Hydraulic wrenches adapted for tubing and DP
• Staff bungalows and workshop container
• Miscellaneous equipment (2 T 500 forklift)
Prepared M. Doc. ref.: DO-077
by: Launay Date revised: 19/03/2019 3 of 14
Revision: A
TECHNICAL SPECIFICATIONS – SK12
CONTENTS
1. LIFTING FUNCTION ................................................................................................................................ 5
2. ROTATION FUNCTION ........................................................................................................................... 7
3. PUMPING FUNCTION ............................................................................................................................. 8
4. MUD UNIT FUNCTION ............................................................................................................................ 9
5. HANDLING EQUIPMENT FUNCTION ................................................................................................... 10
6. ENERGY FUNCTION ............................................................................................................................. 12
7. BOP FUNCTION .................................................................................................................................... 13
Prepared M. Doc. ref.: DO-077
by: Launay Date revised: 19/03/2019 4 of 14
Revision: A
TECHNICAL SPECIFICATIONS – SK12
1. LIFTING FUNCTION
1.1. RIG
MANUFACTURER SKYTOP
RIG NAME SK12
TYPE SKYTOP RR 300, HI 38-38
CARRIER IVECO
Dimensions excluding derrick 12.80 m
Overall dimensions 16.30 m
Width 2.50 m
Total weight including derrick 38 T 000
ENGINE GM 6V92 T MAY 2011
Brand GENERAL MOTORS
Power 350 HP pneumatic starting
Air compressor 8 bars 150 litres on motor-driven carrier
Hydraulic pump COMMERCIAL SP 365 B; 2500 PSI at 230 L/min
Hydraulic tank capacity 1000 litres mounted on carrier
NRD tank capacity 500 litres on carrier
GUY LINES Internal, on carrier reel in engine compartment
1.2. DERRICK
CHARACTERISTICS STATIC CAPACITY 73 T
BRAND SKYTOP BREWSTER
TOTAL DERRICK HEIGHT 18.30 M
CLEAR HEIGHT 15.20 M (below crown block/ground with crown safety block)
STORAGE CAPACITY 2 7/8 TUBING: 2200 M
2 7/8 DP: 1800 M
STORAGE TYPE SINGLE RANGE 2
DERRICK LIGHTING XFF 400 ATEX FLOODLIGHTS
DERRICK-TOP BEACON 2 BEACONS (1 on mains and 1 on solar battery)
1.3. TRAVELLING BLOCK
BRAND MCKISSICK Commenté [CH2]: Nom du fabricant erroné dans
TYPE 83A MODEL l'original
SERIES 80 SERIES
CAPACITY 80 T
STROKE LIMITER Crown-O-Matic clutch system Commenté [CH3]: Nom commercial vérifié, coquille dans
CAPACITY ACCORDING TO SHEAVING 6-strand sheaving, static capacity 49 T, safety coeff 5 le texte source
Prepared M. Doc. ref.: DO-077
by: Launay Date revised: 19/03/2019 5 of 14
Revision: A
TECHNICAL SPECIFICATIONS – SK12
1.4. WORKING FLOOR
MANUFACTURER LAINE MECANIQUE
YEAR 2013
ADJUSTMENT AND FUNCTION Height adjustable by sliding along the rail connected from the carrier
to the derrick jack
MAX USABLE HEIGHT 2.60 M
LENGTH 2.70 M
WIDTH 3.50 M
COLLECTIVE PROTECTION Guard rails with toe-boards, removable for transport
WORKING FLOOR ACCESS 2 sets of steps, including 1 by the foreman's control panel
WORKING FLOOR TRANSPORT Folded and attached to the derrick jack
PROTECTION GREPDHUR anti-slip boards on floor
1.5. MAIN WINCH
MODEL HI-3808-38
BRAND SKYTOP
REEL LEBUS grooved 1’’ wire line
REEL DIAMETER 17”
CABLE CHARACTERISTICS 1’’ EIPS crossover straight
CABLE BREAKING LOAD 460 kN
AUXILIARY BRAKE PARMAC Hydromatic 122
WEIGHT INDICATOR Martin Decker Type G, 0 to 54.5 T
WEIGHT RECORDER Martin Decker OB 18-125
ACTIVE STRAND LUG By clamp inside the reel with safety plate
EMERGENCY MOTOR SHUTDOWN On the foreman's control panel
REEL SAFETY SHUTDOWN Crown-O-Matic clutch system under the reel (reel shutdown and Commenté [CO4]: coquille dans le français: "spous" ou
winch clutch stop) lieu de "sous"
1.6. ANCILLARY WINCH
MANUFACTURER BRADEN
TYPE BG-8A
CABLE DIAMETER 13 mm
CAPACITY 1.5 T
DRIVE Hydraulic, run from the foreman's control panel
ENERGY Hydraulic (rig carrier hydraulic pump)
Prepared M. Doc. ref.: DO-077
by: Launay Date revised: 19/03/2019 6 of 14
Revision: A
TECHNICAL SPECIFICATIONS – SK12
2. ROTATION FUNCTION
2.1. POWER PACK
ENGINE GM 6-71
POWER 180 HP
EMERGENCY SHUTDOWN On unit and on the foreman's control panel
TORQUE INDICATOR BOWEN on control panel
UNIT DESIGN Unit installed on independent skid for transport (motor, hydraulics)
2.2. POWER SWIVEL
MANUFACTURER BOWEN
TYPE S 2.5 C
STATIC CAPACITY 85 short tons (76 T)
DYNAMIC CAPACITY 45 short tons at 100 rpm (38 T)
SAVER SUBS 2 7/8 IF, 2 3/8 IF, 2 7/8 EU
RESTRAINT SYSTEM Power restraint by cables attached to suspension struts
connected to the rig base
POWER SWIVEL ARMS 2 adjustable extensions on power outlets
CABLE DIAMETER 16 mm
CABLE TENSIONERS Positioned at the ends of cables and connected to suspension
struts
INSTALLATION Upper power swivel lifting function assured by specific short
bails and 2 7/8 NU lift (manufacturer spec)
UNIT DESIGN Unit installed on independent skid for transport (power swivel,
control panel, hydraulic hoses)
Prepared M. Doc. ref.: DO-077
by: Launay Date revised: 19/03/2019 7 of 14
Revision: A
TECHNICAL SPECIFICATIONS – SK12
3. PUMPING FUNCTION
3.1. PUMPING UNIT
DESIGN Unit installed and fixed on low-bed trailer with ancillary
equipment store pump on gooseneck Commenté [CH5]: Ici et ailleurs, le manque de
PUMP MANUFACTURER GARDNER DENVER ponctuation rendait la compréhension hazardeuse...
TYPE TRIPLEX PAHBFC piston model nous avons fait de notre mieux
PISTON STROKE 8”
PISTONS 4’’ or 4 ½ according to flow rate/pressure range required
MAX PUMPING RATES 700 L/min 4’’ lining to 850 L/min (4 ½’’ lining)
MAX PRESSURES 120 bars (4’’ lining) and 95 Bars (4 ½’’ lining)
SAFETY VALVE Cameron or Harisburg 2’’ reset relief valve
PUMP MOTOR GM 6V92
POWER 358 HP at 2100 rpm
NRD SUPPLY Independent double-walled CEMO Model UNITANK
BOOSTER PUMP Pump-driven HARRISBURG 4 * 3 Supercharging
BP SUCTION MANIFOLD 4-way manifold 4 with 4’’ connectors Fig 100
GRADUATED PUMP TANKS 2 * 2 m3 tanks installed on unit connected to pump via HP
5000 PSI manifold with isolation valves and choke to bleed
the circuit
HP 3000 PSI MANIFOLD Choke-holder manifold with 5 DR plug valves, 1 fixed
choke and 1 adjustable manual choke for direct or reverse
flow
TANK SUCTION HOSES 4’’ hose connectors Fig 100
BP SUCTION HOSE 3’’ FR hoses
HP BACKFLOW HOSES HP 5000 PSI hose connectors Fig 602
On pumping unit with start-up, emergency shutdown,
acceleration, clutch; pump operated by competent operator
CONTROL PANEL using pump panel
Panel with pressure gauge and pump stroke counter on
INSTRUMENTATION unit near control panel
LIGHTING 2 NEON floodlights rated for these zones
Prepared M. Doc. ref.: DO-077
by: Launay Date revised: 19/03/2019 8 of 14
Revision: A
TECHNICAL SPECIFICATIONS – SK12
4. MUD UNIT FUNCTION
4.1. OPEN STORAGE TANKS
NUMBER 3 on skids
MANUFACTURER EMCI 2015
CAPACITY 30 m3 per tank (in 2 * 15 m3 compartments)
LENGTH 11.00 M
WIDTH 2.50 M
WEIGHT 11 T 000
AGITATORS 2 per tank 11 kW power with zone 1 ATEX motors and control units on
retractable legs positioned on the tank
MIXING UNIT Permanently installed on skid tank 2 with SWACO 37 kW electrical
centrifugal pump 5*4*14’’ Impeller and SWACO HiRide hopper Commenté [DI6]: coquille dans la source
TANK GAUGING SYSTEM Graduated metallic strip in each tank visible from the top of the tanks
GUARD RAIL Deployed/retracted from ground level
ACCESS STEPS Fixed on tanks 1 and 3 on skid front, driver's side and fixed on tank 2
in rear position
LIGHTING 1 extendable derrick with 3 XFF 400 ATEX floodlights positioned on
tank 2 for all tanks; deployed/retracted by mechanical winch on rear of
tank
TANK LINKS AND CONNECTIONS Tanks connected via fiberglass 6’’ suction and 4’’ discharge mixing unit
via aerounion system. Mixing unit suction and outflow in all
compartments in the 3 tanks
VALVES WECO 6’’ valves for mixing unit and pump suction; 4’’ valves for
mixing unit discharge; 6’’ and 4’’ plugs to isolate tanks and for safety
during transport.
ELECTRIC ENERGY Electrical cabinet manufactured specially in 2015 with mud unit
operated by 175 kVA generator.
WALKWAYS BETWEEN TANKS Movable walkways between tanks 1 and 2 and tanks 2 and 3, folded Commenté [DI7]: espace manquant dans la source
on top of tanks for transport
HOSE STORAGE Fixed baskets located below steps on tanks 1 and 3
TANK RETURN PIPES Well fluid return port for decanting solids adaptable on tanks 1 and 2;
recovery via submerged pump in basement and 3’’ FR hoses
SAFETY Transfer key safety system for working in basins
LIFTING AND MOVING 1 set of specialized textile slings for lifting basins by low points on
skid.
ADAPTABILITY The mud unit may operate with 1 or 2 or 3 tanks, as needed; safety on
hand rails and access is ensured in all cases considered
4.2. SUBMERSIBLE PUMPS
2 Model EEX ATEX for collecting well fluid returns in basement and
NUMBER/USE pumping to tanks (1 in service, 1 spare)
TYPE KSB or Flyght
30 to 70 m3/h MAX depending on recovered fluid density and viscosity
FLUID CHARACTERISTICS (designed for D MAX = 1.10 and VM MAX = 50 with 4.00 m drop
Prepared M. Doc. ref.: DO-077
by: Launay Date revised: 19/03/2019 9 of 14
Revision: A
TECHNICAL SPECIFICATIONS – SK12
5. HANDLING EQUIPMENT FUNCTION
5.1. TUBING LIFTS
DIAMETER 2 3/8 2 3/8 NU and 2 3/8 EU
BRAND KOT and BJ VARCO
NUMBER 1 NU and 1 EU
CAPACITY 59 T and 59 T
DIAMETER 2 7/8 2 7/8 NU and 2 7/8 EU
BRAND BJ VARCO Type TA 65 and TMA 100
NUMBER 1 * NU and 2 * EU
CAPACITY 59 T and 90 T
DIAMETER 3 ½ 3 ½ NU and 3 1./2 EU
BRAND BJ VARCO
NUMBER 1 NU and 1 EU
CAPACITY 59 T and 90 T
DIAMETER 4’’ 4’’ NU
BRAND VARCO
NUMBER 1
CAPACITY 90 T
DIAMETER 4 ½ 4 ½ NU
BRAND VARCO
NUMBER 1
CAPACITY 59 T
5.2. DRILL PIPE LIFTS
2 3/8 DP 1 * 2 3/8 FW 18° VARCO MG 100 capacity 90 T
2 7/8 DP 1 * 2 7/8 FW 18° VARCO MG 100 capacity 90 T
3 ½ DP 1 * 3 ½ FW 18° VARCO MG 150 OPTIONAL (on special request;
common WO allocation)
5.3. LIFTING ARMS
SET N°1 (type) BJ Toolpusher Links
CAPACITY 136 T
DIAMETER 1 3/4
LENGTH 1.50 M
SET N°2 (type) BJ Toolpusher Links
CAPACITY 90 T
DIAMETER 1 1/2
LENGTH 1.00 M
Prepared M. Doc. ref.: DO-077
by: Launay Date revised: 19/03/2019 10 of 14
Revision: A
TECHNICAL SPECIFICATIONS – SK12
5.4. TUBING AND DP WEDGES
DESIGN PNEUMATIC SPIDER
TYPE GUIBERSON T 60
CAPACITY AND NUMBER 54 T – 2 full spiders (1 in service, 1 spare)
DIAMETERS 2 3/8, 2 7/8, 3 ½ and 4 1/2 Integral body
OPENING Frontal opening wide enough for PCI cable with tubing
CONTROL On the foreman's control panel (3-position lever)
DESIGN OPTIONAL PNEUMATIC SPIDER (on special request; common WO
allocation)
TYPE GUIBERSON T 1110
CAPACITY AND NUMBER 100 T – 1 spider
OPENING Front opening
DIAMETERS 4 ½ and 5 1/2 slip bodies
CONTROL On the foreman's control panel (3-position lever)
NUMBER MINIMUM 2
NUMBER MINIMUM 2
NUMBER MINIMUM 2
5.5. SAFETY CLAMPS
RANGE 2 3/8 to 3 1/2 1 safety clamp BAASH-ROSS Type T
RANGE 3 3/8 to 6’’ 1 safety clamp BAASH-ROSS Type CR
5.6. HYDRAULIC WRENCHES
DESIGN Wrench hung on dedicated cable in the derrick with initial position
adjustment; safety sling attached to wrench. Operated by the rig
hydraulic system with controls on the wrench
BRAND FOSTER HYDRAULIC POWER TONG
WRENCH N°1 58.93
RANGE Diameter 2 3/8 to 4 3/4
MAX. TORQUE 6,000 lbs.ft
NUMBER OF WRENCHES 2 (1 in service and 1 spare)
TORQUE INDICATOR 0 to 6000 lbs.ft FOSTER positioned on the wrench
RETAINING ARM Rigid, adapted to the wrench/rig setup
WRENCH ADJUSTMENT Using the hydraulic suspension cylinder
WRENCH N°2 OPTIONAL HYDRAULIC WRENCH (on special request; common WO
allocation)
WRENCH TYPE N°2 54.93
RANGE Diameter 2 7/8 to 6’’
MAX. TORQUE 12,000 lbs.ft
NUMBER 1
TORQUE INDICATOR 0 to 12000 lbs.ft FOSTER positioned on the wrench
Prepared M. Doc. ref.: DO-077
by: Launay Date revised: 19/03/2019 11 of 14
Revision: A
TECHNICAL SPECIFICATIONS – SK12
RETAINING ARM Rigid, adapted to the wrench/rig setup
WRENCH ADJUSTMENT Using the hydraulic suspension cylinder
6. ENERGY FUNCTION
6.1. GENERATORS
The 2 power generators meet the electrical needs of the fully-equipped rig. The electrical equipment is
compliant with current legislation and checked regularly by an authorized, competent external organization.
GENERATOR N°1 Mounted on skid with closed doors for soundproofing
POWER 80 kVA
BRAND SDMO
FUNCTION Supplies electricity for living quarters, workshop container, derrick
lighting, pump lighting. A smaller version of this generator may also be
stopped and kept as back up or used for safety power at night.
SAFETY Emergency shutdown on generator
GENERATOR N°2 Mounted on skid with closed doors for soundproofing
POWER 175 kVA
BRAND RENAULT
FUNCTION Provide electricity for the mud unit and BOP battery unit. A smaller
version of this generator may also supply the rig and ancillaries.
SAFETY Emergency shutdown on generator
6.2. ELECTRICAL CABINETS
NUMBER 2
FUNCTION 1 cabinet on skid powered by 80 kVA generator for the living quarters
and derrick rig lighting and pump with built-in cable storage basket; 1
cabinet on skid powered by 175 kVA generator for the mud unit and
BOP battery unit with built-in cable storage basket.
INPUT 380 and 220 V, 50 Hz
POWER OUTLETS 150 A/380 V for mixing unit; 63 A/380 V; 32 A/380 V; 16 A/380 V;
32 A/220 V; 16 A/220 V
SAFETY On each cabinet: emergency shutdown, lock and key, 1 sign "First-aid
in case of electrocution", 1 sign "Access for authorized personnel only"
Prepared M. Doc. ref.: DO-077
by: Launay Date revised: 19/03/2019 12 of 14
Revision: A
TECHNICAL SPECIFICATIONS – SK12
6.3. GROUNDING PROTECTION
EQUIPOTENTIAL CONNECTIONS
TYPE Grounding strips and earth rods
GROUNDING STRIPS 200 m TPCE 15-25 grounding strip
EARTH RODS 2 or 3 depending on actual measurements
EARTH TESTER 1 measuring kit
TYPE CMS-XL
7. BOP FUNCTION
7.1. ANNULAR BOP
DIAMETER 7 1/16”
OPERATING PRESSURE 3000 PSI
MANUFACTURER and TYPE TOWNSEND T84
NUMBER 1
DESIGN TOP studded, BOTTOM Flanged
O-RING RX 45
PROTECTION Upper O-ring groove protection plate to install pneumatic spider
DIAMETER 11”
OPERATING PRESSURE 3000 PSI
MANUFACTURER and TYPE HYDRIL GK
NUMBER 1
DESIGN TOP studded, BOTTOM Flanged
O-RING RX 53
PROTECTION Upper O-ring groove protection plate to install pneumatic spider
ADAPTER 11’’- 3K * 89’’ – 3K adapter for connecting to the TIGF wellhead
7.2. RAM BOP
DIAMETER 7 1/16”
OPERATING PRESSURE 3000 PSI
MANUFACTURER and TYPE FLOW CONTROL/TROJAN Double ram Manual lock
NUMBER 1
DESIGN Double Studded
O-RING RX 45
RAMS 2 3/8, 2 7/8, 3 ½, blind
Prepared M. Doc. ref.: DO-077
by: Launay Date revised: 19/03/2019 13 of 14
Revision: A
TECHNICAL SPECIFICATIONS – SK12
7.3. SKID TEST STUMP
MANUFACTURER LAINE MECANIQUE 2014
DESIGN Dual-purpose skid for BOP testing and storage during transport with
double BOP ram on the test flange and annular BOP around the
centring stud
TEST FLANGE 7 1/16 - 5K
ADAPTERS AVAILABLE 7 1/16 - 5K * 3K; 7 1/16 - 3K * 11’’ - 3K
TESTING SHAFTS Full shafts, diameters 2 3/8, 2 7/8 and 3 1/2
TEST PUMP Independent electrical pump
7.4. BATTERY UNIT
BRAND BISON
DESIGN Mounted on skid
TYPE 80
ENERGY 2 energy sources (1 electrical, 1 pneumatic)
BATTERIES 4 isolated by safety valves and blocks with discharge valves and tank
return (dimensions as per API 16E)
BATTERY CAPACITY 10 gal or 12 gal each
OPERATING PRESSURE 3000 PSI
PRESSURE GAUGES On the unit with annual calibration check
REMOTE CONTROL PANEL 1 set with panel and remote control O/F BOP
Prepared M. Doc. ref.: DO-077
by: Launay Date revised: 19/03/2019 14 of 14
Revision: A
