Product Data Sheet
DS – 87376-4 Rev. 2
April 2018
EIM RTS FQ Fail-Safe Quarter-Turn Actuator
Smart and Compact Technical Details
FAIL-SAFE QUARTER-TURN ACTUATOR • Switch off thrust electric: max. 2,000 Nm (1,475 lbs. ft)
• Reliably drive valve in fail-safe position with a • Modulating torque: max. 1,000 Nm (730 lbs. ft)
mechanical spring unit • Fail-safe torque: max. 1,000 Nm (730 lbs. ft)
• Control: integrated controls with frequency inverter • Adjustable positioning time (Electric): 15 - 650 sec
and brushless DC motor
• Adjustable fail-safe operating time: 1–5 sec
• Direct coupling of the fail-safe with the valve shaft
• Non-intrusive limit setting
• Fail-safe triggering selectable in case of drop-off
• Available for power supply:
24 VDC fail-safe signal or main power supply
—— 24 VDC
• Fail-safe speed adjustable
—— 1x 115V – 230 VAC, 50/60 Hz
• Modulating operation up to 1200 starts / hour
possible (S4 operation) —— 3x 380 – 480 VAC, 50/60 Hz
• Configurable fail-safe operating time and ramp speed • Housing Material: Aluminum
• Exclusive spring based mechanical energy storage – • Standard NEMA 4 enclosure
no hydraulics or battery required • Certifcation: ATEX, CSA, UL, IECEx
• No need of periodical inspections – self-testing with
every stroke
Optional Features
• Partial stroke test
• Analog position feedback 0/4-20mA (2-wire)
• Low maintenance
• Relay board for 250 VAC, 2A with 4 or 6 outputs
• Integrated SMARTCON controls with wireless
Bluetooth capability for configuration, monitoring, • Networking (Modbus RTU, HART, Foundation Fieldbus,
and diagnostics of key parameters Profinet, Profibus)
• Data Logger for diagnostics • Mechanical manual override
• SMARTCON Android application • PID controller
• Multi-lingual user-interface
EIM RTS FQ Fail-Safe Quarter-Turn Actuator Product Data Sheet
April 2018 DS – 87376-4 Rev. 2
TYPE FQ-03 FQ-06 FQ-10 FQ-20 FQ-30
Max Electric Torque max. lbs. ft (Nm) 220 (300) 440 (600) 738 (1000) 1475 (2000) 2210 (3000)
Max Fail-safe Torque max. lbs. ft (Nm) 110 (150) 220 (300) 369 (500) 730 (1000) 1100 (1500)
Modulating Torque max. lbs. ft (Nm) 110 (150) 220 (300) 369 (500) 730 (1000) 1100 (1500)
Fail-safe Function Selectable opening and closing (CW/CCW)
Fail-safe Trigger Loss of 24 V DC Fail-safe signal or main power supply (selectable)
Positioning Speed - Electric sec 14 - 420 14 - 420 10 - 250 30 - 850 44 - 620
Positioning Speed - Fail-safe sec 1-5 1-5 3 - 10 3 - 10 10 - 30
Available Travel ° 90 +/– 5° with mechanical end-stop
On/off Duty S2–15 min
Mode of Operation
Modulating Duty S4 – 1200 starts/hour – 40% duty cycle
Manual Override Optional
VALVE-MOUNTING
Flange ISO 5210 F07/F10 F10/F12 F12/F14 F14/F16 F14/F16
Max Stem Diameter in (mm) 1 (25.4) 1.57 (40) 1.92 (49) 2.36 (60) 2.36 (60)
Max Square (Flats) in (mm) 0.86 (22) 1.25 (32) 1.61 (41) 1.88 (48) 1.88 (48)
ENVIRONMENTAL CONDITIONS
Weather Protection IP67 / NEMA 4
Ambient Temperature - 40° C (-40°F) to +60°C (140°F)
Corrosion Protection K2 for aggressive atmospheres
Painting/Color Two component painting / RAL 7024
Weight approx. lb. (kg) 94 (43) 116 (53) 313 (142) 330 (150) 264 (120)
MOTOR - BRUSHLESS TECHNOLOGY
Isolation Class Insulation class F, max. 155° C (311°F) permanent temperature
24 VDC or 115-230 VDC or 1x 115-230 VAC, 50-60Hz or 3x 380-480 VAC, 50-60 Hz
Power Supply V
24 VDC (Option Not Available wit FQ-10, FQ-30)
Nominal Current 2.5 A
Power Comsumption Idle with
40 W
Fail-safe Brake
ACTUATOR CONTROL
Technology Integrated processor control unit with frequency technology for variable speed control
· With additional language independent symbols
Control Elements · Selector switch LOCAL - OFF - REMOTE (lockable)
· Control switch OPEN - STOP - CLOSE contact less sensor technology
Local Display Backlit LCD display, can be rotated in 90 degree steps
LEDs 4 programmable red, green, blue LEDs for operation - readiness - warning - and error messages
Communication Infrared communication interface and bluetooth technology including ANDROID App for simple configuration
· 5 configurable binary (discrete inputs) control inputs:
Inputs OPEN - STOP - CLOSE - EMERGENCY OPEN - EMERGENCY CLOSE
· Nominal voltage 24VDC
· 8 configurable binary (relay) outputs:
Outputs READY - OPEN - CLOSE - RUNNING OPEN - RUNNING CLOSE - TORQUE - LOCAL - REMOTE
· Power supply 24 VDC +/– 6V (selectable internal or external)
FUNCTIONS
· Switch-off mode adjustable, travel or torque dependent
· Torque adjustable: 25-100% of max. torque
· Adjustable speed for process optimization and emergency speeds
· Password protection (reading and/or writing)
Standard
· Multi-language display
· Status indication for binary inputs/outputs and analog signals on LCD Display
· Data logging for analysis and service
· Motor protection by Positive Temperature Coefficient sensors
ELECTRICAL CONNECTION
3 metric threaded boreholes for cable grands: M40x1.5 / M32x1.5 / M25x1.5
Cable Entry
(Optional: 2x NPT1/2“ + 1xNPT1“)
