Scribd
Upload
213 views1 page

Zen Air Blue Manual Ver2

The ZEN Air Blue is a wireless Bluetooth DAC with digital and analog outputs that requires a 5V DC power supply. It supports various Bluetooth codecs including AAC, aptX, aptX HD, aptX Adaptive, aptX LL, LDAC, and HWA. The front of the device displays the Bluetooth codec and sample rate being received via different LED colors. It can pair with up to 8 Bluetooth devices and has RCA outputs, a pairing button, and a voice announcement feature that can be turned on and off.

Uploaded by

Jose Miguel Maldonado
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
213 views1 page

Zen Air Blue Manual Ver2

The ZEN Air Blue is a wireless Bluetooth DAC with digital and analog outputs that requires a 5V DC power supply. It supports various Bluetooth codecs including AAC, aptX, aptX HD, aptX Adaptive, aptX LL, LDAC, and HWA. The front of the device displays the Bluetooth codec and sample rate being received via different LED colors. It can pair with up to 8 Bluetooth devices and has RCA outputs, a pairing button, and a voice announcement feature that can be turned on and off.

Uploaded by

Jose Miguel Maldonado
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DC 5V

R L

Air

Outputs

4 5

4. Single-Ended RCA outputs


Connect analogue RCA interconnects to an amplifier.

5. DC 5V power
kHz
The ZEN Air Blue must ONLY be powered by 5 volts.

Tip: For best performance, an ultra-low noise power adapter such as the iFi iPower2 or
iPower X is recommended.

Specifications:
Power supply requirement: DC 5V, 0.5A (centre +ve)
1 2 3 Chipset: Qualcomm QCC 5100 Series
Input: Bluetooth 5.1 TM with AAC, SBC, aptX, aptX HD,
aptX Adaptive, aptX LL, LDAC, HWA Codec
Thank you for purchasing the Blue from the ZEN Air series. The
Output: Audio RCA L/R
ZEN Air Blue is a wireless Bluetooth DAC with digital and
Frequency Response: 20Hz - 20kHz +0/-0.5dB (44.1kHz)
analogue outputs.
1Hz - 44khz +0/-3.0dB (≥88.2kHz)
Output Voltage @ 0dBFS:
1. Bluetooth Sample Rate LED (kHz) 2.05V (±0.05V)
DNR: 109dB (A)
The LED colour scheme indicates the sampling frequency
received by ZEN Air Blue from the music source. SNR: 109dB (A) @ 0dBFS

kHz LED THD & N: <0.0015% 10k Load @ 0dBFS

44/48 Blue Output Impedance: <50Ω

88/96 White Power Consumption: <2.5W


Dimensions: 158 x 100 x 35 mm (6.2" x 3.9" x 1.4")

2. Bluetooth codec display Net weight: 295g (0.65 lbs)

Codec Warranty period: 12 months


Specifications are subject to change without notice.
The colour of the ‘iFi’ logo in the centre of the front display
represents the file format received:
Format LE D
SBC Off
AAC Yellow
apt X Bl ue
ap tX H D M agenta
aptX Adaptive Green
aptX LL Red
LDAC Cyan
LHDC/HWA White

3. Bluetooth pairing button, display and


Voice announcement on/off
The ZEN Air Blue receives a Bluetooth signal via aptX, aptX HD,
aptX Adaptive, aptX LL, LDAC, HWA, AAC and SBC.
Pairing
After power on, ZEN Air Blue blinks blue as it searches for a
previously paired device. When a stored device is not found, it
then automatically enters pairing mode with LED (1) blinking
blue and red.

To enter pairing mode manually, press and hold the pairing


button (3) until LED (1) blinks blue and red.

ZEN Air Blue is able to store up to 8 previously paired Bluetooth


devices. Manual reconnection may still be necessary.

Display on/off
Short press once to switch the LED display on/off.

Voice announcement on/off


Press the button twice briefly to switch the voice
announcement on/off.
High tone On
Low tone Off
ifi-audio.com Ver1.0

You might also like