Scribd
Upload
388 views1 page

Configure OLT PON Authentication

The document discusses configuring the authentication mode of OLT PON interfaces to LOID and discovering illegal ONUs connected to the interfaces to legalize them. It explains how to set the authentication mode to LOID, show illegally registered ONUs, find the LOID of an illegal ONU, and add the ONU with its LOID to legalize it by binding it to a line and service profile.

Uploaded by

Qiandra kamilah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
388 views1 page

Configure OLT PON Authentication

The document discusses configuring the authentication mode of OLT PON interfaces to LOID and discovering illegal ONUs connected to the interfaces to legalize them. It explains how to set the authentication mode to LOID, show illegally registered ONUs, find the LOID of an illegal ONU, and add the ONU with its LOID to legalize it by binding it to a line and service profile.

Uploaded by

Qiandra kamilah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Legalizing and showing ONU

Configure the registration and authentication mode of the OLT PON interface.
Raisecom(config)#interface rang gpon-olt 1/1-4
//use the rang command to enter PON interfaces 1-4 on card 1 on the OLT.
Raisecom(config-if-gpon-olt-range)#authorization mode loid
//configure the authentication mode to loid. By default, the authentication mode of the PON interface
is sn.
Discover illegal ONUs and legalize them.
Raisecom#show interface gpon-olt illegal-onu
OLT ID: 1/1
Total illegal ONU number: 1
----------------------------------
Register time : 2013-12-13,14:06:51
SN : 52434D47C4612630
SN-Password : RCMG
LOID : true
LOID-Checkcode: None
//After the fiber is connected to the ONU, the CLI should report an ONU illegal registration alarm.
Find the LOID of the ONU according to the reported log or information about illegal registration of
the ONU connected to the OLT PON interface.
Raisecom(config)#interface gpon-olt 1/1
//enter the PON interface.
Raisecom(config-if-gpon-olt-1:1)# create gpon-onu loid true line-profile-id 1 service-profile-id 1
//Add an ONU, with LOID of true. Bind it with line profile 1 and service profile 1.

www.raisecom.com / 6

You might also like