Scribd
Upload
58 views

BFValve Spec

The document provides specifications for butterfly valves, including: 1. The valve type (e.g. lug or wafer style), material of construction, rating, and dimensional standards. 2. Acceptable materials include carbon steel, stainless steel, and bronze/brass. Seats are metal. 3. Operators are lever for valves 6 inches or smaller and gear for 8 inches or larger. Ends are flanged from 3 inches and above.

Uploaded by

Thamotharan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
58 views

BFValve Spec

The document provides specifications for butterfly valves, including: 1. The valve type (e.g. lug or wafer style), material of construction, rating, and dimensional standards. 2. Acceptable materials include carbon steel, stainless steel, and bronze/brass. Seats are metal. 3. Operators are lever for valves 6 inches or smaller and gear for 8 inches or larger. Ends are flanged from 3 inches and above.

Uploaded by

Thamotharan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

JITENDRA SURVE PIPING GUIDE 03/04/03

BUTTERFLY VALVE SPECIFICATION

• Butterfly Valve is specified with following information.


1. Valve Type.
2. End Type.
3. Rating.
4. Facing Finish.
5. Material of Construction.
6. Seat type.
7. Operator.
8. Valve Dimensional Standard.
9. End Condition Dimensional Standard.

VALVE TYPE

• LTCS and CS = Butterfly Lug Valve


• SS304 = Butterfly WFR Valve.

END TYPE

• Flanged.
• 3” and above.
• Rating as per Connecting flange.

FACING FINISH

• 125-250 AARH

MATERIAL OF CONSTRUCTION

• LTCS: Body : A352-LCB Trim : 2-304 (BF Lug Valve)


• SS304 : Body: EPDM Lin A216-WCB Trim: 304, Fully lined. (BF WFR
Valve).
• CS : Body: A216-WCB Trim: 2-304. for BF Lug Valve.
• CS : Body: BUNA-N LIN A216-WCB Trim: F6 Fully lined for BF WFR
Valve.
• Galvanised : Bronze Brass

-1-
JITENDRA SURVE PIPING GUIDE 03/04/03

SEAT TYPE

• Metal Seat

OPERATOR

• Lever : For 6” and below. (Can be 4” and below for High pressure).
• Gear : For 8” and above.

VALVE DIMENSIONAL STANDARD

• API 609

END DIMENSIONAL STANDARD

• ASME B16.5 : For 24” and below.


• ASME B16.47 : For 24” and above.

-2-

You might also like