2

Q37e/Q37ce Operations Manual

Thank you for choosing an Octane Fitness® elliptical cross trainer and congratulations on fueling your exercise
program. The team at Octane Fitness is totally focused on creating the best elliptical products in the world so that
you will have a tremendous workout experience. We wish you great success in using your new cross trainer to
achieve your workout goals and Fuel Your Life™!

Your new Octane Fitness elliptical has a wide variety of features that will help you to stay motivated and reach
your fitness goals. Please read this manual thoroughly to become acquainted with your product; it includes
important information on operation and maintenance.

Octane Fitness distributes products only through authorized specialty fitness dealers. These dealers are
experts in all aspects of the fitness experience and are trained to assist you with any questions you may
have about your Octane Fitness product. However, if you would like to speak directly to an Octane Fitness
customer service specialist, please do not hesitate to call us at 888.OCTANE4 or visit our web site at
www.octanefitness.com.

Octane Fitness
9200 Wyoming Avenue North
Suite 380
Brooklyn Park, MN 55437
Phone: 888.OCTANE4
Fax: 763.323.2064
www.octanefitness.com

Fueled,

Dennis Lee
President

3
 This product is intended for household use.

IMPORTANT SAFETY INSTRUCTIONS

Please Read and Save These Instructions

WARNING! Before beginning this or any exercise program, consult your physician. This is especially important
for persons over 35 or persons with pre-existing health conditions. If at any time during exercise you experience
chest pains, nausea, dizziness, or shortness of breath, stop exercising immediately and consult your physician
before starting again.

Read this Operations Manual before operating this elliptical cross trainer.

WARNING! When using an electrical product, basic precautions should always be followed.

To reduce the risk of burns, fire, electrical shock or injury to people:

• Use this exercise product for its intended use as described in this Operations Manual. Do not modify the
product in any way.
• Do not remove the plastic shrouds from the machine. Service should be performed only by an authorized
Octane Fitness service representative. Moving parts contained under the shrouds can be extremely
dangerous when not covered.
• Never operate this elliptical cross trainer if it has a damaged cord or plug, if it is not working properly, if it
has been dropped or damaged, or dropped in water. Return the cross trainer to your local dealer or Octane
Fitness for examination and repair.
• Never operate this elliptical cross trainer with the air openings blockedl. Keep the air opening free of lint,
hair, and the like.
• Keep the cord away from heated surfaces.
• Do not use outdoors.
• Do not operate this elliptical cross trainer where aerosol (spray) products are being used or where oxygen
is being administered.
• Do not route power cables (such as the power cable for an optional attached LCD screen) through the
interior of the machine or the upright tube.
• Do not mount an LCD screen weighing more than 8.5 lbs. (3.8 kg) on the optional LCD mounting arm.
• Never place the power cord under carpeting or place any object on top of the power cord which may pinch
and/or damage it.
• Use only the power cord provided with your Octane Fitness elliptical cross trainer.
• Unplug your Octane Fitness elliptical cross trainer before moving it.

SAVE THESE INSTRUCTIONS

4
 OTHER IMPORTANT SAFETY PRECAUTIONS
• Place the elliptical cross trainer on a level surface with at least two feet of clearance behind the pedal at
its furthest back position.
• To protect the floor or carpet from damage, place a mat under your elliptical cross trainer.
• Keep children off the elliptical cross trainer at all times.
• When the elliptical cross trainer is in use, children and pets should be kept clear of the area.
• Wear appropriate exercise clothing and shoes for your workout; do not wear loose clothing.
• Use care when getting on or off the Octane Fitness elliptical cross trainer. Never step on or off the unit
while the foot pedals are still moving.
• Always face forward. Never attempt to turn around on the Octane Fitness elliptical cross trainer.
• Do not sit, stand, or climb on the front plastic shroud, electronic console, or stationary handlebars.
• Keep your hands and feet clear of any opening or moving parts.
• Never insert or drop any object into any opening.
• Do not overexert yourself or work to exhaustion.
• If during your workout you feel any chest pain, nausea, dizziness, or abnormal symptoms, stop your
workout immediately and consult your physician.
• Wipe down external surfaces of your cross trainer after use to remove sweat and dust.
• Monitor and check your Octane Fitness elliptical cross trainer on a regular basis. Refer to the Cleaning and
Maintenance section of this manual for more information about the care of your Octane elliptical cross
trainer.
• Inspect all parts of the elliptical cross trainer regularly. If service is required, contact your local dealer or
Octane Fitness Customer Service for assistance.
• Take caution in moving your Octane Fitness elliptical cross trainer. Your elliptical weighs over 260 lbs. Use
proper lifting techniques and/or get assistance when moving your product.

Product Dimensions: 1727mm x 737mm x 1550mm This equipment complies where applicable with:
(68in x 29in x 61in)
Product Weight 260 lbs. (118 Kg) 73/23/EEC Low Voltage Directive
Max User Weight 300 pounds (136 Kg) 89/36/EEC Electromagnetic Compatibility
(EN61000)
Power Supply/Electrical Specifications:
Input Rating 100-240~0.4A
2002/95/EC Restriction of Hazardous Substances
Frequency 50-60Hz (RoHS) Directive
Output Rating +9V 1.5A 2002/96/EC WEEE Directive
Output Ripple 90mV EN957-9 Stationary training equipment
Output Current 1.5A Max EN957-1:1997 Stationary training equipment
Safety UL/CUL, TUV, PSE, CE, C-Tick, 3C, B- EN60335-1:2002 Household and similar electrical
Mark appliances - Safety
GPS General Product Safety Regulations 2005

5
H EART RATE F EATURE SA F ET Y G UI D ELINES
Before using the Octane Fitness Q37e/Q37ce with HeartLogic™ Intelligence, read and follow these instructions:

Contact Heart Rate Grips

• Clean the contact heart rate grips periodically to remove sweat and oils. Use a damp cloth with a mild
detergent. Do not spray the hand grips directly with water or a cleaner; this could cause an electrical
short.
• When holding the grips, grasp each contact heart rate grip so the contact sensor portion of the grip rests
in the palm of your hand. Grip the contact sensors firmly, and keep your hands steady and in place.

Wireless Chest Strap

• Exercisers may use the wireless heart rate transmitter provided with the Octane Fitness Q37e/Q37ce or
any Polar™-compatible (coded or non-coded) wireless heart rate transmitter.
• Do not allow users to use the chest strap if they have a cardiac pacemaker or are taking
prescription medication. Medication or electrical impulses from the cardiac pacemaker can cause
inaccurate heart rate readings.
• Please take care in handling the equipment as it is extremely sensitive.
• Do not bend the strips inside the chest strap as it can cause the strap to lose its conductivity.
• Handle the heart rate transmitter (chest strap) with care. Dropping the transmitter might cause damage
and this could void the warranty.
• If the receiver (console) tries to process several signals simultaneously, an incorrect heart rate reading
could result. In a commercial setting, space the products at least 24” apart. This will prevent cross-talk,
where the chest strap signal from a user on one machine can be received and displayed on the console of
another machine.
• Do not place the chest strap near devices that generate large magnetic fields. Television sets, electric
motors, radios, and high voltage power lines can affect the transmitter’s performance. These items can
interfere with the heart rate signal that is being transmitted to the receiver, possibly affecting the heart
rate readings that appear on the electronic console.
• Do not immerse the transmitter in water. However, some moisture is necessary for the transmitter to
function properly. Perspiration is usually sufficient, but you may need to moisten the electrodes with a
small amount of water. The electrodes are the ribbed portion on the side of the transmitter that sits against
your skin.
• The wireless chest strap has a battery which may need to be replaced from time to time. A faulty battery
or worn electrodes may cause inaccurate readings. The electrodes are the ribbed portion on the side of the
transmitter that sits against your skin.
• To purchase wireless transmitter straps, contact your dealer or Octane Fitness sales representative.

Some individuals are unable to use the heart rate feature because they do not have the proper body chemistry
to provide accurate readings. If you experience difficulties in using the contact heart rate grips or a wireless
chest strap, contact your dealer or Octane Fitness Customer Service at 1.888.OCTANE4.
WARNING! The heart rate monitoring features of this product are for information only and are not to be used as
a measure of heart functioning or heart health. In a heart rate controlled program, you can use the Level controls
to reduce the resistance level at any time.You are responsible for monitoring how you feeland adjusting
the level of effort accordingly. If at any time during exercise you experience chest pains, nausea, dizziness, or
shortness of breath, stop exercising immediately and consult a physician before starting again.

6
TA B LE O F C O NTENTS

Electronics....................................................................................................................................... 8
• Q37e/ce Console and Keypad............................................................................................ 8
• Programs and Features..................................................................................................... 11
– Classic Programs...................................................................................................... 14
– Heart Rate Programs............................................................................................... 16
– Goal Programs.......................................................................................................... 19
– Cross-Circuit Programs........................................................................................... 23
– Workload Resistance............................................................................................... 26
– LED Readout Windows............................................................................................ 27
– Q37ce Contact Heart Rate...................................................................................... 28
– X-Mode....................................................................................................................... 29
– GluteKicker................................................................................................................ 29
– ArmBlaster................................................................................................................. 30
– HeartLogic Intelligence........................................................................................... 30
– Critical Heart Rate Feedback................................................................................. 31
• Customizing Key Features................................................................................................. 32
MultiGrip Handlebars.................................................................................................................. 35
Smart Exercise Tips..................................................................................................................... 36
Starting Your Workout................................................................................................................. 39
Cleaning & Maintenance. .......................................................................................................... 40
Troubleshooting & FAQs............................................................................................................. 41
Limited Consumer Warranty....................................................................................................... 44

7
ELECTRONICS
Q37e/Q37ce Console and Keypad
Welcome to some of the easiest to use, yet most sophisticated, electronics available in the fitness industry! Your
Q37e/Q37ce features a simple, easy to understand keypad and a console featuring an informative matrix display
and four multi-function LED display windows that provide you with all the information you need to get started and
stay motivated during your workout.
Programming the console DedicatedLogic™ programming was created to give you the ultimate in ease of
use and total flexibility for programming your console. This allows you to modify
your workout once you’ve started. You can even start your workout, then program
the electronics. This ease of use starts by giving each key only one function. This
makes it easy to understand how each key works.
Keypad Buttons
Quick Start T he easiest way for you to start your workout is to simply push the Quick Start
button, setting the machine in a manual program at resistance level one. The
calories readout will be based on a 150 lb. (68 kg) user. Once you have selected
Quick Start, you can program any item in any order.
My QuickStart 1 & 2 T he My QuickStart buttons take the traditional Quick Start to the next level
by memorizing your workout profile. My QuickStart remembers your favorite
program and attributes and, with a simple push of the button, retrieves them for
your next workout.
Y ou can easily set your profile while using the machine. Simply begin your
workout and enter your information as usual—program, time, level, age, and
weight, adding ArmBlaster, X-Mode, and/or GluteKicker if you wish. Once
your elliptical cross trainer is set the way you like it, simply press and hold the
My QuickStart 1 (or My QuickStart 2) button until you hear the console beep,
indicating that this favorite profile has been saved. If you decide during your
workout to change what you have saved (for example, you decide to increase the
time or level), just enter the changes on the console. If you want to save these
new settings, just press and hold My QuickStart again for three seconds or until
you hear the beep. This resets your saved profile using the new attributes.
T he next time you are ready for your favorite workout, simply press the My
QuickStart button and begin pedaling. You may also switch to your favorite
program after you have started a workout; to do this, press Pause Clear twice
within two seconds to reset the machine, then press My QuickStart to begin your
program.
Tip: Use My QuickStart 1 and My QuickStart 2 to save two different workouts.
Save the first one according to the directions above, then press Pause
Clear twice within two seconds to reset the machine, and follow the steps
again to save the second workout using the other My QuickStart button.

Tip: If you feel like doing something different after you have started your
favorite workout with My QuickStart, simply enter your new information.
This will only change the current workout, not your saved favorite.
Note: Your profile is saved even when you unplug the machine.

8
 Now-Zone 
Press the Now-Zone button to move instantly into a heart rate-controlled program
using your current heart rate as the target. Press the button a second time to exit
the heart rate-controlled program and enter a manual program. Now-Zone can
be activated while in any program at any time as long as you are wearing your
wireless transmitter.
Cool Down It is always a good idea to perform a cool-down at the end of your routine. This
will help transition your body from an aggressive workout to its normal pace. The
time and intensity of the cool-down is automatically customized to your workout
duration and resistance level. The time window will change to a countdown timer
to tell you how long the cool-down will last.
If you have set a time for your workout, the cool-down will automatically start
when time has expired. If you decide to end your workout early or have not set a
time goal, simply push the Cool Down button to activate the custom cool-down.
At the completion of your cool-down a workout summary will be displayed.
Pause Clear Press once to pause your workout. The standard pause time is 5 minutes. Use
the Time (/) keys to increase or decrease the pause time; this adjustment
can be made at any time while the machine is in pause mode. To restart a
paused workout, push any key or just begin pedaling. If you stop pedaling during
a workout, the unit will automatically begin a 5-minute pause. Simply start
pedaling to resume your workout.
P ress the Pause Clear button twice within two seconds, and your machine is
reset and ready for another workout. Press and hold the Pause Clear button until
you hear the beep to enter sleep mode, a virtual off mode. The matrix display
reads “UNFUELING”, and just one LED in the X-Mode window remains lit. Your
elliptical requires very little power in this mode. To “wake” your elliptical, simply
press any button or begin pedaling.
Up and Down Keys
Time P ress the Time Up Arrow () or Down Arrow () to increase or decrease the time
of your workout, in 1 minute increments. The standard workout time is 30:00. The
maximum time is 99:00.
Program P ress the Program Up Arrow () or Down Arrow () to toggle through program
categories, then press Enter to select the category. Use any Up Arrow () or
Down Arrow () to scroll through the programs within a category, then press
Enter to select a program. Program changes can be made any time during your
workout. When you change programs, the matrix window prompts you to enter
new program values as needed.
Note: The Program key is also used to activate the MOM (MOvement Management) mode, a unique motion
control feature of the Octane Fitness elliptical. For more information on MOM mode, go to page 32.
Level Press Level (/) to increase or decrease the resistance level of the machine.
There are 20 levels of resistance for preset resistance programs and the 30:30
fitness number program. For heart rate controlled programs, the Level button
increases your target heart rate. (For more information on heart rate programs,
go to page 16). To save a change in target heart rate, you must hit Enter after
entering the desired number.

9
 Age Used for heart rate programs. Entering an age will give a recommended target
heart rate based on the formula 220 – your age = your theoretical maximum
heart rate (TMHR). That number is then multiplied by the program intensity value
to determine your target heart rate(s). If you are not in a heart rate controlled
program, but want to see your heart rate percentage, just enter your age. For
more information, refer to page 37, “What should my heart rate be?”.
Weight Press Weight (/) to increase or decrease the value for user weight. This
value is used to give a more accurate calorie burn readout. Weight is displayed
in pounds (English) or kilograms (metric). Use the User Set-up function (described
on page 32) to change the display from one to the other.
Enter Selects any of the changed values or items from the above keys. Also, pressing
the Enter key during any workout will stop the LED readout windows from
toggling between display modes.

Note: T here is no need to turn off your elliptical machine; the Q37e/Q37ce was designed with an intelligent
sleep mode, a virtual off button. This eliminates the need for an on/off switch. To enter sleep mode, press
and hold the Pause Clear button until you hear the beep. The matrix display reads “UNFUELING”, and
just one LED in the X-Mode window remains lit. Your elliptical requires very little power in this mode. To
“wake” your elliptical, simply press any button or begin pedaling.

Workout Boosters
ArmBlaster ArmBlaster is a proprietary program designed to boost cardiovascular endurance
while building strength and muscle tone. Press the ArmBlaster button at any
time during your workout to integrate cardio sessions with strength sessions. The
cardio session follows the program profile that you have selected. Every minute
resistance increases 10 levels from where you are currently working (or to the
maximum resistance of 20) for a muscle-building, 10-repetition set as you transfer
the workload from your lower body to your upper body. During the ArmBlaster rep
countdown, the level of resistance can be changed by pressing any Up Arrow ()
or Down Arrow () keys. To deactivate ArmBlaster, simply press the ArmBlaster
button a second time.
X-Mode X-Mode is a great way to take advantage of the variety your elliptical cross trainer
offers. Press the X-Mode button within any program, and a combination of one to
four randomly-generated X-Mode+ LEDs will light up instructing you what to do.
Each X-Mode session lasts for one minute with a one-minute “regular” program
routine in between. The Q37e/Q37ce offers eight different X-Mode challenges:
Push-Arms, Lower Body Only, Fast, Pull-Arms, Squat, Slow, Reverse, and Lean Back.
To deactivate X-Mode, simply press the X-Mode button a second time.
GluteKicker GluteKicker is an aggressive subset of X-Mode that is focused on your glutes, hips,
and thighs. It uses four prompts: Reverse, Squat, Fast, and Lean Back. GluteKicker
sessions last for one minute, with a one-minute recovery period.

10
 Q37e/Q37ce Console and Keypad
Programs and Features
The Q37e/Q37ce features 16 built-in programs to keep your workouts interesting:
Classic programs: Manual—Random—Custom Interval—Beginner
Heart rate programs: Fat Burn—Cardio—HR Custom Interval—30:30
Goal programs: 350 Calories—750 Calories—10K—1/2 Marathon
Cross-Circuit programs: Lower Body Blast—Upper Body Blast—Core Focus—Total Body Blast
Programs begin with a warm-up to ease your body into your intense workout. During the warm-up, the resistance
increases each minute. At the end of the warm-up, you will be at your selected resistance value or target heart
rate. You can change the level at any time during the warm-up.
Choose the program that best fits your workout needs for any given day. You decide how hard to work by setting
the resistance level and goal (such as time, distance, or calories). Program your workout your way!
Use the following quick-reference chart to help you select and set up your program, or read on for more detailed
program descriptions.
11
 Q37e/Q37ce PROGRAM REFERENCE
Press Program(/) and Enter. to choose a program category; press any (/) and Enter to choose a program.
CLASSIC PROGRAMS
Program Description Settings Standard
Values*
Manual Get on and go; constant resistance Level 1
Random Computer-randomized resistance variation Level 1
Custom Interval Up to 6 alternating intervals of user-defined duration Intervals (2-6) 3
and resistance Interval 1 — Time 00:30
Interval 1 — Level 1
Interval n — Time 00:30
Interval n — Level 1
Beginner 14-day planned workout sequence to help jump-start Day 1
your exercise program
HEART RATE PROGRAMS
Program Description Settings Standard
Values*
Fat Burn Controlled workout at 65% of theoretical maximum Age 40
heart rate (or user-specified target heart rate) to Target Heart Rate (220 - Age) * .65
maximize fat burn
Cardio Controlled workout at 80% of theoretical maximum Age 40
heart rate (or user-specified target heart rate) to Target Heart Rate (220 - Age) * .80
maximize cardiovascular development
Heart Rate Controlled workout of up to 6 alternating intervals of Age 40
Custom Interval user-defined duration and target heart rates Intervals (2-6) 3
Interval 1 — Time 00:30
Interval 1 — Target Heart Rate (220 - Age) * .75
Interval n — Time 00:30
Interval n — Target Heart Rate (220 - Age) * .75
30:30 Fitness assessment with 5 sets of alternating sprint Level 1
and walk intervals to determine average heart rate
recovery
GOAL PROGRAMS
Program Description Settings Standard
Values*
350 Calories Uniform or varying resistance workout to burn 350 Weight 150 lbs. (68 kg)
calories Goal 350
Flat or Hills Flat
Level 1
750 Calories Uniform or varying resistance workout to burn 750 Weight 150 lbs. (68 kg)
calories Goal 750
Flat or Hills Flat
Level 1
10K Simulated 10-kilometer event with flat or “uphill” and Weight 150 lbs. (68 kg)
“downhill” terrain Adjust Goal 6.2 Miles (10K)
Flat or Hills Flat
Level 1
1/2 Marathon Simulated 1/2 Marathon event with flat or “uphill” and Weight 150 lbs. (68 kg)
“downhill” terrain Adjust Goal 13.1 Miles (21K)
Flat or Hills Flat
Level 1

12
 Q37e/Q37ce PROGRAM REFERENCE
Press Program(/) and Enter. to choose a program category; press any (/) and Enter to choose a program.
CROSS-CiRCUIT™ PROGRAMS
Program Description Settings Standard
Values*
Lower Body Blast CROSS-CiRCUIT™ routine combining cardio intervals on Cardio Time 2:00
the elliptical with off-machine strength sets targeting Strength Time 1:00
the lower body Level 1
Upper Body Blast CROSS-CiRCUIT™ routine combining cardio intervals on Cardio Time 2:00
the elliptical with off-machine strength sets targeting Strength Time 1:00
the upper body Level 1
Core Focus ™
CROSS-CiRCUIT routine combining cardio intervals on Cardio Time 2:00
the elliptical with off-machine strength sets targeting Strength Time 1:00
the core Level 1
Total Body Blast ™
CROSS-CiRCUIT routine combining cardio intervals on Cardio Time 2:00
the elliptical with off-machine strength sets alternating Strength Time 1:00
between lower body, upper body, and core Level 1
*Standard program values are used if no values are entered within 4 seconds of prompts.

Q37e/ce SETTINGS—VALUE RANGES

Setting Standard Values* Minimum Value Maximum Value
Time 30:00 1:00 99:00
Level 1 1 20
Age 40 15 99
Weight 150 lbs. (68 kg) 70 lbs. (32 kg) 300 lbs. (181 kg)
Interval Time 00:30 00:15 99:00
Interval Level 1 1 20
How Many Intervals 3 2 6
Target Heart Rate (220 - Age) * %; varies by program 80 (220 - Age)
Calorie Goal 350 or 750 25 2000
Distance Goal 6.2 miles (10K) or 13.1 Miles (21K) .25 miles (.4 km) 50 miles (80 km)
Flat or Hills? Flat n/a n/a
Cardio Time 2:00 1:00 30:00
Strength Time 1:00 0:15 30:00
*Standard program values are used if no values are entered within 4 seconds of prompts.

13
Classic Programs
Manual—Random—Custom Interval—Beginner

Manual T he Manual program simulates walking or jogging on a flat surface.

This program does not have a warm-up. The resistance stays
constant for the entire workout, unless you change it by pressing
Level (/). The oval racetrack signifies 1/4 mile or 400 meters; a counter in the
matrix display shows how many laps you have completed during your workout.
The resistance can be changed any time during the workout.

Level

Random T he Random program has a virtually infinite number of different combinations.

The computer randomly generates a new course each time you select the random
program or change the program level, giving you different levels of resistance.
Each column on the matrix display lasts for 1 minute. The resistance can be
changed any time during the workout by pressing Level (/).

14
Custom Interval T he Custom Interval program lets you specify the resistance level and duration of
up to 6 alternating intervals. Use the Up Arrow () and Down Arrow () keys to
enter the program settings as prompted by the matrix window: Time, How Many
Intervals (2 to 6), 1st Interval—Time, 1st Interval—Level, nth Interval—Time, nth
Interval—Level, Age, and Weight. Interval time ranges from 00:15 to 99:00, in
15-second increments. Once you are pedaling and your warm-up is complete, you
can increase or decrease the level of the current interval at any time by pressing
the Level (/) keys. The value of the other intervals does not change. The value
you enter changes only the current interval for the entire remaining workout, or until
you change it again.
User-Set
User Level 3 Times
User Level 2

User Level 1

Custom Inter val

Beginner T he Beginner program is a great routine for beginners or people just getting back
into their workouts. This program is designed to carry you through 14 workouts,
one per day, gradually increasing intensity each day. Each day’s workout includes
a preset value for time, resistance level, and a recommended speed (RPM). Use
Level (/) to select the day, and the program begins using the preset values
outlined in the chart below. These preset values can be changed during the
workout at any time by pressing the Level (/) keys.

Program Day (Level) 1 2 3 4 5 6 7 8 9 10 11 12 13 14

Resistance Level 1 1 1 2 2 2 3 3 3 4 4 4 4 5
Time 10 10 11 11 12 13 14 15 16 17 18 19 19 20
RPMs 30 35 35 35 35 35 35 40 40 40 40 40 45 45

15
Heart Rate Programs
Fat Burn—Cardio—Heart Rate Custom Interval—30:30

Note: For heart rate controlled programs to work effectively, you must be wearing a wireless chest strap or
consistently grasping the contact heart rate grips on the moving handlebars throughout your workout

Fat Burn T he Fat Burn program guides your workout to maximize the percentage of
calories burned from fat versus carbohydrates. Use the Up Arrow () and Down
Arrow () keys to enter the program settings as prompted: Age and Target Heart
Rate. The recommended target heart rate is 65% of your theoretical maximum
heart rate (TMHR = 220 – age). The program begins with a warm-up. If you reach
your target heart rate during the warm-up, the warm-up ends and the heart
rate control portion begins. The resistance will automatically adjust to keep you
working out at your target heart rate. At any time during the program you can
change your target heart rate by pressing the Level (/) buttons and Enter.

Example for a 40-year-old person:

220 – 40 yrs. old = 180 TMHR
180 * .65 = 117 Target heart rate

Cardio T he Cardio program guides your workout to maximize cardiovascular benefits,

like training for a race. Use the Up Arrow () and Down Arrow () keys to enter
the program settings as prompted: Age and Target Heart Rate. The recommended
target heart rate is 80% of your theoretical maximum heart rate (TMHR = 220
– age). The program begins with a warm-up. If you reach your target heart rate
during the warm-up, the warm-up ends and the heart rate control portion begins.
The resistance will automatically adjust to keep you working out at your target
heart rate. At any time during the program you can change your target heart rate
by pressing the Level (/) buttons and Enter.

Example for a 40-year-old person:

220 – 40 yrs. old = 180 TMHR
180 * .80 = 144 Target heart rate

16

Heart Rate T he Heart Rate Custom Interval program lets you specify the target heart rate
Custom Interval and duration of up to 6 alternating intervals. Use the Up Arrow () and Down
Arrow () keys to enter the program settings as prompted by the matrix window:
Age, Intervals (2 to 6), Interval 1—Time, Interval 1—Target Heart Rate, Interval
n—Time, and Interval n—Target Heart Rate. Interval time ranges from 00:15 to
99:00, in 15-second increments. The minimum target heart rate is 80. The program
begins with a warm-up. If you reach your target heart rate during the warm-up, the
warm-up ends and the heart rate control portion begins. The resistance increases
or decreases at the end of each time period to get you to the next interval. When
you reach the new target heart rate, the new timed interval begins. The display
will prompt you to increase or decrease your effort until the desired heart rate is
reached. During the program you can change the target heart rate of the current
interval at any time by pressing the Level (/) keys.

User-Set HR Controlled
Time Variable Time

User-Set
Time
User Target HR 3
User Target HR 2
User Target HR 1

17
 30:30 T he 30:30 program provides a simple test of your fitness level with 5 sets of
30-second sprint and recovery intervals. For each set, the program monitors
your heart rate and calculates the number of beats that your heart rate recovers
between sprint intervals. Heart rate recovery is a measure of your overall fitness
level. The program begins with the three-minute warm-up during which the
resistance level increases each minute. You may also use the Level (/)
buttons to increase the resistance at any time. Once you have completed the
warm-up, the matrix window tells you when to begin each fast interval (65 RPM
or higher) and when to slow down (40 RPM or lower). For each interval pair, the
program records your maximum heart rate and your minimum heart rate. At the
end of 5 sets of sprint and recovery intervals, there is a recovery period. During
this time the matrix window displays the your maximum and minimum heart rates
for each interval. The computer calculates the 5-interval average maximum heart
rate and the average minimum heart rate, and the difference between the two
averages is your heart rate recovery ‘score’. This value is a relative indicator of
your fitness level; a higher number indicates a more rapid heart rate recovery and
therefore represents a relatively better level of fitness. After the recovery period
you will begin a new 5-interval set. The program ends with a 3-minute cool-
down. Compare your average heart rate recovery score from workout to workout
and watch your fitness level improve over time with consistent training!

Tip: The standard recovery period between sets is three minutes. You can use
the User Set-up function described on page 32 to set a recovery period of
one to five minutes.

30-second 30-second
Sprint Walk

3-Minute 3-Minute
Recovery Recovery

5 Intervals for Fitness Score

30 : 30

18
Goal Programs
350 Calories—750 Calories—10K—1/2 Marathon

350 Calories T he 350 Calorie goal program lets you get moving and work on a flat or “hilly”
course until you have burned 350 calories. Use the Up Arrow () and Down
Arrow () keys to enter the program settings as prompted by the matrix window:
Weight, Goal, Flat or Hills, and Level (the average level you want for the entire
workout). The level can be changed at any time during your workout by pressing
the Level (/) keys. Watch the countdown in the matrix windows as the calories
fall away!

GOAL!
350
Calories

350 Calories

OR
GOAL!
350
Calories

350 Calories

19
 750 Calories The 750 Calorie goal program provides an even greater challenge as you work to
burn off 750 calories. Use the Up Arrow () and Down Arrow () keys to enter
the program settings as prompted by the matrix window: Weight, Goal, Flat or
Hills, and Level (the average level you want for the entire workout). The level can
be changed at any time during your workout by pressing the Level (/) keys.
The countdown of calories burned is displayed in the matrix window.

GOAL!
350
Calories

750 Calories

OR
GOAL!
750 Calories

750 Calories

20
10K 1 0K simulates jogging or running outdoors. It is a great training device to get ready
for a competition. Use the Up Arrow () and Down Arrow () keys to enter the
program settings as prompted by the matrix window: Age, Goal, Flat or Hills, and
Level (the average level you want for the entire workout). Once you are pedaling
and your warm-up is complete, the changes in terrain replicate the challenges
you encounter running outside, or you can choose a flat, steady resistance path.
You can feel going uphill and downhill with gradual resistance changes. The
distance readout counts down from 6.2 miles (10 kilometers). The level can be
changed at any time during your workout by pressing the Level (/) keys.

GOAL!
10K

10K

OR
GOAL!
10K

10K

21
 1/2 Marathon 1/2 Marathon simulates jogging or running outdoors. It is a great training device
to get ready for a long-distance race. Use the Up Arrow () and Down Arrow ()
keys to enter the program settings as prompted by the matrix window: Age, Goal,
Flat or Hills, and Level (the average level you want for the entire workout). Once
you are pedaling and your warm-up is complete, the changes in terrain replicate
the challenges you encounter running outside, or you can choose a flat, steady
resistance path. You can feel going uphill and downhill with gradual resistance
changes. The distance readout counts down from 13.1 miles (21 kilometers).
The level can be changed at any time during your workout by pressing the Level
(/) keys.

OR

GOAL!
1/2 Marathon

1/2 Mar athon

22
CROSS-CiRCUIT™ Programs
Lower Body Blast—Upper Body Blast—Core Focus—
Total Body Blast

CROSS-CiRCUIT is a whole new way of working out with your Octane elliptical. These programs combine cardio
intervals on the elliptical cross trainer with sets of strength and toning exercises off the machine using simple
equipment such as hand weights or a fitness ball.
Your CROSS-CiRCUIT Strength Training Interval Guide provides suggested
CORE

CROSS CiRCUIT ™
exercises to target the lower body (green tab), upper body (blue tab), and core
UPPER

Strength Interval Guide

Use these exercises when your console
refers to Lower, Upper and Core. (red tab). Just choose the exercises that best suit your needs. Mix it up, keep it
interesting, and watch your body change for the better with these great total-
LOWER

body workout alternatives!

Lower Body Blast L ower Body Blast targets the thighs, calves, hips and glutes with off-machine
strength-building sets. Get started by using the Up Arrow () and Down Arrow
() keys to enter the program settings as prompted by the matrix window:
Cardio Time, Strength Time, and Level. After completing the warm-up, your first
cardio interval begins. Listen for the beeps at the end of the cardio interval,
then carefully step off the machine to complete your lower-body strength set.
The display will flash and you will hear another set of beeps when it is time to
step back on the elliptical for your next cardio interval. This pattern continues
throughout your workout. The resistance level for the cardio intervals can be
changed at any time by pressing the Level (/) buttons at any time.

Cardio
Interval CROSS-CiRCUIT™
Lower Body Exercise

Lower Body Blast

23
 Upper Body Blast  pper Body Blast targets the arms, shoulders, chest, and upper back with off-
U
machine strength-building sets. Get started by using the Up Arrow () and Down
Arrow () keys to enter the program settings as prompted by the matrix window:
Cardio Time, Strength Time, and Level. After completing the warm-up, your first
cardio interval begins. Listen for the beeps at the end of the cardio interval,
then carefully step off the machine to complete your upper-body strength set.
The display will flash and you will hear another set of beeps when it is time to
step back on the elliptical for your next cardio interval. This pattern continues
throughout your workout. The resistance level for the cardio intervals can be
changed at any time by pressing the Level (/) buttons at any time.

Cardio
Interval CROSS-CiRCUIT™
Upper Body Exercise

Upper Body Blast

Core Focus C ore Focus targets the abs and back with off-machine strength-building sets.
Get started by using the Up Arrow () and Down Arrow () keys to enter the
program settings as prompted by the matrix window: Cardio Time, Strength Time,
and Level. After completing the warm-up, your first cardio interval begins. Listen
for the beeps at the end of the cardio interval, then carefully step off the machine
to complete your core strength set. The display will flash and you will hear
another set of beeps when it is time to step back on the elliptical for your next
cardio interval. This pattern continues throughout your workout. The resistance
level for the cardio intervals can be changed at any time by pressing the Level
(/) buttons at any time.

Cardio
Interval CROSS-CiRCUIT™
Core Exercise

Cor e Focus

24
Total Body Blast T otal Body Blast works it all with exercises aimed at strenghtening and toning
your entier body. Get started by using the Up Arrow () and Down Arrow ()
keys to enter the program settings as prompted by the matrix window: Cardio
Time, Strength Time, and Level. After completing the warm-up, your first cardio
interval begins. Listen for the beeps at the end of the cardio interval and check
the matrix display to see which type of exercise to do. Then, carefully step off
the machine to complete your strength set. The display will flash and you will
hear another set of beeps when it is time to step back on the elliptical for your
next cardio interval. A pattern of upper, lower, and core strength sets continues
throughout your workout. The resistance level for the cardio intervals can be
changed at any time by pressing the Level (/) buttons.

Cardio
Interval CROSS-CiRCUIT™
Exercise--Alternating Lower, Upper, Core

Total Body Blast

25
Workload Resistance

Resistance Level  ctane Fitness Q37e and Q37ce have 20 discrete levels of resistance. Level 1
O
is the easiest and level 20 is the most difficult. The Manual program and Quick
Start give the user the ability to totally control the resistance level. Custom
Interval allows the user to select the resistance level for individual intervals.
Program Level The Octane Fitness Random and Goal programs using the “Hills” profile enable
the user to select an overall resistance level for the program. This level is the
average resistance level for the workout. The resistance levels achieved during
these workouts are plus (+) or minus (-) 4 of the entered program level (i.e. If the
selected program level = 5, minimum resistance = 1, and maximum resistance
level = 9. During the workout, the resistance level is displayed. If the Level is
changed during the workout, the program level is also changed.
Resistance in Heart Rate Fat Burn, Cardio, and Custom Heart Rate Interval control the resistance level
Controlled Programs throughout the warm-up and the program, based on the user’s entered age and
theoretical maximum heart rate (TMHR). The resistance level increases and
decreases dependent on the user’s heart rate.

26
LED Readout Windows Q37e/Q37ce

Time 
Displays workout time, counting up from 0:00. The maximum time is 99:59, then
the display rolls over to 0:00. Note: The Time readout can be adjusted to count
down instead of up; refer to User Set-up Functions on page 32.
Distance 
Displays an estimate of how far you have traveled. Distance can be shown in
either miles (English) or kilometers (metric). Note: Pedaling approximately 50
revolutions per minute (rpm), it will take eight minutes to reach one mile. When
you first purchase your elliptical the display will be in English. Refer to the User
Set-up features described on page 32 to switch from English to metric.
Speed  isplays how fast you are going. Speed is displayed in revolutions per minute
D
(rpm).
Calories  isplays an estimate of the total calories burned during your workout. Calories are
D
based on the user’s entered weight. If you do not enter a specific weight, calories
are based on a 150 lb. (68 kg) user.
Calories/Hour  isplays the number of calories that would be burned in one hour at the current
D
resistance level and speed.
Time-in-Zone T racks and displays the amount of time you are in the proper heart rate training
zone for the program. Time-in-Zone is only displayed when you are in a heart rate
controlled program and your heart rate is detected by the machine. Note: You
must be wearing a wireless chest strap or consistently grasping the contact heart
rate sensor grips (Q37ce) throughout your workout in order to get an accurate
reading of Time-in-Zone.
Heart Rate  isplays your heart rate in beats per minute (BPM). Note: You must be wearing a
D
wireless chest strap or grasping the contact heart rate sensor grips (Q37ce).
Heart Rate %  isplays your current heart rate percentage (current heart rate / theoretical
D
maximum heart rate). Note: You must be wearing a wireless chest strap or
grasping the contact heart rate sensor grips (Q37ce), and have entered your age.
Target HR  isplays the heart rate hat you are trying to achieve when in a heart rate controlled
D
program. In these programs, the machine adjusts resistance level in response to
your heart rate reading in order to achieve this target.
Level  isplays the resistance level (1- 20), where 1 is the lowest resistance level and 20
D
is the highest.

27
Q37ce Contact Heart Rate Option
Your Octane Fitness cross-trainer features premium workouts designed to take full advantage of the benefits
of heart rate zone training programs: Fat Burn, Cardio, Heart Rate Custom Interval, and 30:30. Each individual
workout offers different premium benefits, as described on pages 16 through 18.

To take advantage of the heart rate features, your may use the wireless chest strap (provided) or simply grip the
contact heart rate sensors on the stationary handlebars. In a heart rate controlled program, your current heart
rate is monitored and the resistance level will automatically adjust to maintain your target heart rate. To change
the target heart rate during a workout, use the Level (/) keys.

Octane Fitness Digital Heart Rate Sensors

The Octane Fitness digital contact heart sensors on the Q37ce track your heart rate more easily and more
accurately to help produce the ultimate workout. Simply grip the digital contact heart rate sensors when using a
heart rate program. For the most accurate heart rate reading possible:
• Grasp each contact heart rate grip sensor so the contact sensor portion of the grip rests in the palm of
your hand.
• Grip the contact sensors firmly yet comfortably.
• Keep your hands steady and in place.

28
X-Mode

Using X-Mode is like having a personal trainer coaching you. It is a great way to take advantage of the variety
your elliptical cross trainer offers, and is a great motivational tool that keeps your workout fresh and exciting.
The X-Mode feature works in any program; simply push the button to activate. X-Mode offers eight different
challenges: Squat, Fast, Push-Arms, Pull-Arms, Lean Back, Slow, Reverse, and Lower Body Only.
Squat Bend slightly at the knees. You’ll feel this one in your quadriceps and glutes in
no time!
Fast Pick up the pace - we recommend 50-60 rpm, but you should find your own
comfort level.
Push-Arms Focus on pushing with your arms to work your chest and triceps.
Pull-Arms Focus on pulling with your arms to work your biceps and lats.
Lean Back  rab the stationary handlebars and lean slightly backwards, changing the muscle
G
focus on your lower body. You will feel this in your quadriceps.
Slow Slow down to allow yourself to recover. We recommend 30-40 rpm.
Reverse Pedal backwards to change the muscle focus on your entire lower body.
Lower Body Only Either hold the stationary handlebars or naturally swing your arms.
When X-Mode is active, one to four X-Mode LED combinations will light up instructing you what to do. The light
sequence is randomly generated so you never know what is coming next.
To activate X-Mode, simply push the X-Mode button while in any program. To turn X-Mode off, push the button
again. In its original (out-of-the-box) configuration, each X-Mode session lasts for one minute. The countdown
time displays how much time until your next X-Mode interval or how much time is left in your X-Mode interval.
Once you complete the instruction, you have a two minute period where you do your normal elliptical routine
(according to the program you are using). After this two minute period, you will automatically get your next
X-Mode routine. Good luck!
Tip: Want to increase or decrease the length of your X-Mode intervals? Just press and hold the X-Mode button
for three seconds, or until you hear a beep. You can then set the time for X-Mode to be “On” and “Off”. See
page 33 for additional details!

GluteKicker™
 luteKicker is an aggressive subset of X-Mode that is focused on your glutes, hips and thighs. It uses four
G
modes; Reverse, Squat, Fast and Lean Back. GluteKicker sessions last for one minute, with a one minute recovery
period.
Tip: Want to increase or decrease the length of your GluteKicker intervals? Just press and hold the GluteKicker
button for three seconds, or until you hear a beep. You can then set the time for GluteKicker to be “On” and
“Off”. See page 33 for additional details!

29
ArmBlaster
ArmBlaster is a proprietary program designed to boost cardiovascular endurance while building strength
and muscle tone. ArmBlaster integrates cardio sessions with strength sessions. The cardio session follows
the program profile that you have selected. Every minute, resistance increases 10 levels (or to the maximum
resistance of 20) for a muscle-building, 10-repetition set as you transfer the workload from your lower body to
your upper body. During the ArmBlaster rep countdown, the level of resistance can be changed by pressing the
Level (/) buttons.
Tip: Want to change the intensity, number of reps, or time between ArmBlaster intervals for your entire program?
Just press and hold the ArmBlaster button for three seconds, or until you hear a beep. You can then set the
time between ArmBlaster blasts, the number of reps, and the increase in resistance for the blasts. See page
34 for additional details!

HeartLogic Intelligence
The Q37e and Q37ce are equipped with HeartLogic—the latest in heart rate control technology. HeartLogic
Intelligence is a sophisticated yet easy to use technology that brings you the most accurate and effective workout
possible. It all begins with the wireless chest strap and, on the Q37ce, the digital contact heart rate grip sensors.
There are three different heart rate controlled programs (Fat Burn, Cardio, Heart Rate Custom Interval) and one
heart rate monitored program (30:30) to keep your workouts fun and interesting. The Now-Zone™ button lets you
instantly lock into your current heart rate no matter what program you’re in—all at the push of a button. To top it
all off, the monitor displays your time-in-zone, current heart rate, heart rate %, and target heart rate so you know
exactly where you are and where you should be.
Using a wireless The wireless chest strap transmits your heart
chest strap rate to the electronics console at a distance
of up to three feet. You may use any Polar™-
compatible (coded or non-coded) transmitter.
Adjust the length of the elastic strap and
fasten it to the transmitter around your
torso, underneath your shirt. Place the strap
just below your chest. Make sure the logo is
away from you and right side up. It may help
to moisten the electrodes on the back of the
transmitter with a small amount of water for
better contact with the skin. The electrodes
are the ribbed portion on the back side of
the transmitter that sits against your skin.
Make sure the strap fits snugly but doesn’t
restrict breathing. The contact handgrips
reading takes priority if both the wireless
and contact heart rate grips are in use.
Now-Zone Now-Zone is a great feature that instantly puts you into a heart rate controlled program
using your current heart rate as the target. Press the button a second time to exit the
heart rate-controlled program and enter a manual program. Now-Zone can be activated
while in any program at any time as long as you are wearing your wireless transmitter
or grasping the contact heart rate sensors. (If you are not wearing a transmitter or
grasping the sensors, the matrix display reads “NO HR” and your elliptical will switch
to the Manual program.)

30
 Using the digital The digital contact heart rate sensors are located on the stationary handlebars of the
contact heart Q37ce. The grips can be used to check your heart rate during your workout. For the
rate sensors most accurate heart rate reading possible, grasp each contact heart rate grip so that
the contact sensor portion of the grip rests in the palm of your hand. Grip the contact
sensors firmly, and keep your hands steady and in place.

Critical Heart Rate Feedback

LED Readout
Heart rate controlled workouts are one of the most accurate training techniques available. Understanding your
body’s intensity level is critical in taking your workouts to the next level. HeartLogic excels at displaying essential
data during your workout, enabling you to maximize your exercise time and effectiveness.
The Q37e and Q37ce contain four LED readout windows that communicate valuable heart rate information during
your workout. This includes your Time-in-zone, Current Heart Rate, Heart Rate % and Target Heart Rate.
Tip: You can stop the toggling between top and bottom displays by pressing the Enter key during your workout. All
of the heart rate data is located on the bottom row. To resume display toggling, press Enter a second time.

Matrix Display
During the Heart Rate Custom Interval program the matrix display is used to inform you of your progress through
the intervals.

Changing Target Heart Rates – When you are trying to reach

a new target heart rate, the left side of the display shows an
illustration of the interval. The interval illustration blinks the
interval you are attempting to reach. Each column represents one
minute. An arrow on the right side of the display shows whether
your heart rate should be increasing or decreasing. The picture
to the right shows the heart rate interval program in the matrix
display. Upcoming columns blink

Interval Duration – Once you have reached or surpassed the

new target heart rate, the matrix display switches to a countdown
timer, counting down the length of the interval. The bottom row of
the matrix displays a horizontal bar graph representing the current
resistance level.

31
Customizing Key Features
Many of the standard features and controls of your Octane Fitness cross-trainer can be customized to fit your
personal preferences. In just a few simple steps, you can set up your machine to skip the Warm-Up, countdown
your workout time, and display units in English or metric. You can mute the console beeps, adjust the brightness
of the display, and set the length of the 30:30 program rest period to suit your personal preference. You can also
enable the unique Movement Management (MOM) control feature, and change the duration of your X-Mode,
GluteKicker, or ArmBlaster intervals, and adjust the intensity of your ArmBlaster sets. All of these adjustments
are easily completed and are saved as the new standard for your machine—you don’t need to reset them for each
use.
User Set-up Functions
P rogram features, console settings, and controls may be adjusted to suit your workout environment and your
personal preferences. To access the User Set-Up functions, press and hold both the Level () and Level ()
buttons for three seconds, or until you hear a beep. The following customizable functions are displayed in
sequence; use the Enter key to toggle through the available options for each function, and press any (/)
button to select a setting and move to the next function. To exit without changing a value, press Pause
Clear.
Warm-Up (W-Up Time) This feature may be turned “On” (to include a 3-minute warm-up in
each workout) or “OFF”. The original setting is “On”.
Clock Direction Your elliptical cross-trainer can track your workout time by counting
up (“UP”) or down (“dn”). The original setting is “UP”.
Movement Management MOM mode is a unique control feature offered exclusively on Octane
(MOM) Fitness elliptical Q37 cross-trainer. Activating MOM mode disables
the console buttons and increases the resistance in the movement of
the pedals so that the pedals do not move as easily. This control fea-
ture may discourage children from experimenting with the machine.
This User Set-Up function lets you enable (“On”) or disable (“OFF”)
the MOM mode. The original setting is “On”. To activate MOM
mode after your workout, press and hold the Program (/) keys
for three seconds or until you hear the beep. The machine resistance
then increases to level 20 and the console buttons are inactive. The
machine appears to be in “Pause” mode, but if any console keys are
pressed, “MOM MODE ACTIVE” scrolls across the matrix display. To
unlock MOM mode, press and hold the Program (/) keys again for
three seconds or until you hear the beep.
CAUTION! MOM mode is a feature provided to reduce the
likelihood that children can pedal the elliptical cross-trainer.
This feature does not lock the machine; the pedals still move
and the potential for injury still exists. It is the responsibility of
the user to supervise children and keep them off the elliptical
cross trainer to minimize the likelihood of injury.
Units You may choose to have the units displayed in “ENGLISH” (miles) or
“METRIC” (kilometers). The original setting is “ENGLISH”.

32
Beep You may turn the console sounds “On” or “OFF”. The original setting
is “On”.
30:30 Rest Minutes You may set the 30:30 program rest time from 1 to 5 minutes (in whole
minutes only). The original setting is 3 minutes.
Brightness (BRIT) You can adjust the intensity or brightness of the console LEDs, choos-
ing any value between 1 and 8. A higher number represents more
light. The original setting is 8.
Exit When EXIT is displayed in the matrix window, press Enter to leave
User Set-up. All of your selections will be saved and will become the
new standard settings for your machine. They may be changed at any
time by repeating these set-up procedures.

X-Mode

To customize the X-Mode feature, press and hold the X-Mode button for three seconds, or until you hear
a beep. You can then customize two characteristics of X-Mode:

X-Mode On Time The length of each X-Mode interval. The original setting is 1:00.
Use the Time (/) buttons to increase or decrease this interval
(displayed in the X-Mode window), choosing any value between 0:15
and 10 minutes, in increments of 0:15. Press Enter to save the new
X-Mode interval length. To exit without changing the value, press
Pause Clear.
X-Mode Off Time The length of time between X-Mode intervals. The original setting is
1:00. Use the Time (/) buttons to increase or decrease this inter-
val, choosing any value between 0:15 and 10 minutes, in increments
of 0:15. Press Enter to save the new time between X-Mode intervals.
To exit without changing the value, press Pause Clear.
Once you have saved your selections, they are set as the new stan-
dard for your machine—you don’t need to reset them for each use.
GluteKicker
To customize the GluteKicker feature, press and hold the GluteKicker button for three seconds, or until
you hear a beep. You can then customize two characteristics of GluteKicker:

GluteKicker On Time The length of each GluteKicker interval. The original setting is 1:00.
Use the Time (/) buttosn to increase or decrease this interval,
choosing any value between 0:15 and 10 minutes, in increments of
0:15. Press Enter to save the new GluteKicker interval length. To exit
without changing the value, press Pause Clear.
GluteKicker Off Time The length of time between GluteKicker intervals. The original setting
is 1:00. Use the Time (/) buttons to increase or decrease this
interval, choosing any value between 0:15 and 10 minutes, in incre-
ments of 0:15. Press Enter to save the new time between GluteKicker
intervals. To exit without changing the value, press Pause Clear.
Once you have saved your selections, they are set as the new stan-
dard for your machine—you don’t need to reset them for each use.

33
 ArmBlaster

To customize the ArmBlaster feature, press and hold the ArmBlaster button for three seconds, or until you
hear a beep. You can then customize three characteristics of ArmBlaster:
ArmBlaster Off Time The time between ArmBlaster sets. The original setting is 1:00. Use
the Time (/) buttons to increase or decrease this interval (dis-
played in the TIME window), choosing any value between 1:00 and 10
minutes, in increments of 0:15. Press Enter to save the new time. To
exit without changing the value, press Pause Clear.
ArmBlaster Reps The number of repetitions in each ArmBlaster sets. A press with
both the right and left hand equals one rep. The original setting is
10. Use the Time (/) buttons to increase or decrease this number
(displayed in the TIME window), choosing any value between 5 and
20. Press Enter to save the new number of reps. To exit without
changing the value, press Pause Clear.
ArmBlaster Level Change The number of resistance levels to be added to your cardio level for
the ArmBlaster “blasts”. The original setting is 10. Use the Level
(/) buttons to increase or decrease value (displayed in the LEVEL
window), choosing any value between 1 and 19. Press Enter to save
the new level change value. To exit without changing the value, press
Pause Clear.
Once you have saved your selections, they are set as the new standard
for your machine—you don’t need to reset them for each use.

34
MULTIGRIP HANDLEBARS
Your Octane Fitness cross trainer features one-of-a-kind
handlebars that deliver the ultimate upper-body workout with
virtually unlimited options for maximal comfort, customization
and effectiveness. The unique MultiGrip handlebars with Zone 1
converging motion are only offered by Octane, and these
innovative handlebars have revolutionized how you workout
Zone 5 Zone 2
your upper-body. The MultiGrip handlebars are comfortable
in any position, whether you’re hanging on loosely for a
brief, easy workout, or gripping the MultiGrip handlebars
tightly to complete a lengthy, heart-pumping, high-intensity
workout session . Zone 4
Zone 3
The converging motion and unique design of the MultiGrip
handlebars fit every exerciser—tall, short, slender, bigger
framed, and even those with shorter or longer arms—
providing a multitude of choices that result in the most
comfortable and ergonomically correct positions of any
cross trainer. You will feel the difference! Here’s how they
can be put to work for you:

Zone 1 Top horizontal position Ideal for pushing

Gives longer range of motion
Engages the deltoid (shoulder) and lat (back) muscles
Zone 2 Large corner position Push with the palms; better stability for a excellent chest press motion
Widest position Focuses more on using the pectoral (chest) muscles
Zone 3 Wide grip Emphasizes pectoral (chest) and lat (back) muscles
Zone 4 Low inside position Shorter range of motion
Suitable for lighter workouts with less upper-body involvement
Great position for squatting down and pedaling in reverse
Simulates runners movement or when moving fast
Zone 5 Narrow vertical position Great for pulling or pushing of the arms
Focuses on the lat (back), triceps (back of arm), and biceps (front of arm) muscles

No matter what position or zone you select, you’re working numerous different muscle groups throughout your
upper-body to get a true elliptical cross training workout. You can emphasize either a push or pull movement or
reposition your hands any time during any workout program for maximal muscle exertion, balance, variety, and
comfort.

The innovative choices of the converging, MultiGrip handlebars, combined with Octane’s variety of interactive
cross-training workouts, create enjoyable, effective exercise sessions that produce astonishing results.

35
SMART EXERCISE TIPS
Be sure to consult your doctor before beginning any exercise program.
Books, videotapes, the Internet, and personal trainers are all great sources of information on exercise programs.
Make sure the information comes from a credible source such as The American College of Sports Medicine (ACSM)
or The American Council on Exercise (ACE). Visit them on the web at:
• www.acsm.org
• www.acefitness.com
For every good information resource, there is also a gimmick or fad. A simple rule of thumb is that if it sounds too
good to be true, then it probably is. The best route to a happier, healthier life is good old-fashioned work—20+
minutes per day, 3-5 times per week. Several key considerations will help you determine the best program for you:
FIT (frequency, intensity, time), heart rate, exercise variety and setting goals.
FIT
Frequency How often you workout. Three to five times per week is best.
Intensity  hatever your exercise goals, you need to exercise at the right intensity
W
level. If you don’t exercise hard enough, you won’t get the results you
want. Exercise too hard and you could experience unnecessary pain and
risk injury, leading you to abandon your exercise routine altogether.
Time T ime is the duration of your workout. To achieve the results you are looking
for, it is important that you exercise for at least 20 minutes. If you are new
to exercise, slowly increase the duration of each workout. A great method
is to add one minute to each workout until you reach your desired time.
The Beginner program is a perfect solution.
Heart Rate
Your heart rate is your body’s speedometer. The best way to gauge your exercise intensity is by measuring your heart
rate. There are two ways to measure your heart rate: electronically and manually.

Electronic measurement The Octane Fitness Q37e and Q37ce come with a wireless chest strap
that measures and displays your heart rate on the console throughout your
workout. The Q37ce also provides digital contact heart rate sensors on the
stationary handlebars. To take it one step further, Octane offers HeartLogic
Intelligence which will change the machine’s resistance to maintain the
desired heart rate. For additional information on HeartLogic Intelligence
please refer to page 30.
Manual measurement You can manually check your pulse using your first and second fingers.
Place them either under your chin and next to your Adam’s apple or on the
palm side of your wrist. Count your pulse for six seconds and multiply it
by ten. You should periodically check your heart rate when exercising to
insure that you are in the proper training zone.

36
What should my heart rate be? T o understand exercise intensity you must first determine your theoretical
maximum heart rate (TMHR) by subtracting your age from 220. The lower
limit of your heart rate training zone is 55% of your TMHR; the upper limit
is 90% of TMHR. You should always exercise within these numbers.
Example for a 40-year-old exerciser:
220 – 40 = 180 TMHR in beats per minutes (BPM)
180 x .55 = 99 BPM lower limit
180 x .90 = 162 BPM higher limit

T his shows that a 40-year-old exerciser’s heart rate should be between 99

and 162 beats per minute during a workout. The chart below can be used
as a reference.

If your exercise goal is to burn fat and lose weight, you should exercise
in the range of 60% to 70% of your TMHR. You should also exercise for a
longer period of time, at least 30 minutes. This will maximize the calories
being burned from fat stores. If your goal is to improve your cardiovascular
level, then you should train at a higher intensity, in the 75% to 90%
TMHR range. While exercising in this higher intensity range, you will be
conditioning your heart and lungs to maximize your overall cardiovascular
fitness.

37
 Exercise Variety  hile Octane offers one of the most versatile exercise machines
W
available, we encourage people to vary their workouts, whether this means
choosing a different program or doing a different form of exercise. This
will reduce boredom, one of the most common reasons people quit their
exercise regimen. Make sure you use all of the features on your Octane
elliptical cross trainer. Try a different program. Turn on X-Mode. Watch
a different TV show or crank up the music. Remember, variety leads to
better workouts. Along with using your Octane elliptical, do different
exercises. Take a brisk walk by the lake. Hop on your bike or strap on
your inline skates. Climb that hill or cruise through the trails on your
cross-country skis. Ride an exercise bike, jog on a treadmill or climb those
dreaded stairs. A little variety can take you a long way.

Setting Goals Another key to a successful exercise program is setting obtainable goals.
Goals can be big or small. We recommend smaller goals so you see
progress. Here are a few examples:
• Lose one pound per week
• Cut out sweets
• Workout four days/week
• Increase the length of your workout one minute each session until
you hit 45 minutes/workout
Once you set your goals, make sure you write them down and make them
visible. Tape them to your bathroom mirror, on your refrigerator, or on your
computer monitor. Don’t lose sight of your goals. Whatever your goals
are, make them realistic so you can reach them and experience progress.
Celebrate success, then move on to the next goal.

38
STARTING YOUR WORKOUT
WARM-UP Start your workout at a lower speed and intensity for three to five minutes.
This allows the blood to flow throughout the body and raise muscle temperature. You can
walk, pedal, bike or use your elliptical cross trainer for your warm-up.
MOUNTING THE The low step-up height of the Octane Fitness cross trainer makes it easy to get on and
PRODUCT off the product. You can step on the machine from the rear or from the right or left
side. Grasp either the moving or stationary handlebars for balance. Step carefully onto
the lowest pedal, and remember that the pedal may move as you step on. You’re ready to
go!
PROGRAMMING The DedicatedLogic programming was designed to give you the most flexibility in
programming the machine. There are several easy ways to start:
• Use QuickStart to immediately begin the Manual program;
• Use My QuickStart 1 or My QuickStart 2 to immediately begin your favorite
program;
• Start with the Time (/) buttons and work your way across the keypad as
you enter your selections and data. You can also use the console keys to change
programs and settings after you have started pedaling.
For a more detailed look at the electronics, turn to page 8.
WORKOUTS Y our product has 16 built-in workouts. We encourage you to try all of them and mix up
your routine. Remember, boredom can destroy an exercise program. Your Octane Fitness
elliptical cross trainer is just that—a cross trainer—so change it up! Go forward,
backward, fast, slow, push, pull, total-body, and lower body only; or, turn on X-Mode and
let the computer run you through your workout.
COOL DOWN In addition to warming up your body before exercise, you should perform a proper cool-
down when you are finished. The Cool Down button is a simple and effective way to do
this. For more information on Octane Fitness custom cool-down, please refer to page 9.
STRETCHING Stretching is a critical part of any exercise routine and should not be overlooked. Best
performed after your workout when your muscles are warm, proper stretching promotes
flexibility and can reduce the risk of injury. Well-stretched muscles, tendons, and
ligaments can make exercise and recovery much more enjoyable. Stretching can help
reduce stress. You will feel the benefits of a properly stretched body throughout your
entire day.
The first thing to know about stretching is to perform slow, controlled movements; no
bouncing! You should feel tension, but not pain. Once you start to feel the stretch hold
that position for 10-30 seconds. Breathe deeply, and after holding the position, release
for five seconds, then return for another 20 seconds. A proper stretching routine will take
10-15 minutes but will benefit you 24 hours a day.
Remember:
• Stretch slowly
• Hold for 10-30 seconds
• Stop at a comfortable tension, not pain
• Breathe deeply

39
CLEANING & MAINTENANCE
WARNING! Machine contains moving parts. Take caution when trying to locate and fix any problem with the
machine.

Your Octane Fitness elliptical has been manufactured to withstand many hours of hard use with minimal required
maintenance. The only thing you will have to do is keep the machine clean.

Wipe the machine down after a hard workout to remove any sweat and keep the machine clean. From time to time
you may need to also clean the chrome rails and wheel assemblies. Simply lift up the pedal levers and wipe down
the rails with a clean, dry cloth or paper towel.

DO NOT USE ANY CLEANERS ON THE CHROME RAILS. DO NOT USE WD-40 OR ANY TYPE OF SILICONE
SPRAY - IF USED IT CAN CREATE AN INCREASE IN WHEEL NOISE.
WARNING
Before starting any exercise program, consult
your physician. Machine contains moving
parts. To avoid injury keep children and pets
clear of the exerciser at all times. Review
and follow all warnings and instructions in the
owner’s manual prior to use.

WARNUNG
Bevor Sie mit diesem Übungsprogramm beginnen,
sollten Sie Ihren Arzt um Rat fragen. Maschine
enthält bewegliche Teile. Um Verletzung zu
vermeiden halten Sie Ihre Kinder und Haustiere
durchgehend von der Maschine entfernt. Lesen
und befolgen Sie alle Warnungen und Anweisungen

Console Serial Number

in der Bedienungsanleitung vor Gebrauch.
DEU

AVERTISSEMENT (on lower edge)

Avant d’entamer un programme d’exercice, OCTANE FITNESS, LLC
9200 Wyoming Avenue North, Suite 380
vueillez consulter votre médecin. L’appareil Brooklyn Park, MN 55445 USA
possède des parties mobiles. Pour éviter un Covered by one or more of U.S. Patents Nos. 6248044, 7270626, 7244218,
RoHS Compliant D547159, 5938570, 6409635, and other patents pending. Made in Taiwan
accident, les enfants et les animaux domestiques
Input Rating 100-240V~0.4A
doivent toujours être tenus à l’écart de la machine 9V 1.5A
d’exercice. Avant de vous servir de votre appareil, Max User Weight: 300lbs - Class HC S/N: R05080000001- 01
lisez et suivez tout avertissement et toutes
consignes dans le manuel d’utilisateur. FR-C
Base Serial Number
CAUTION
Moving parts. Keep children,
pets, hands and feet clear
during use.

VORSICHT
Bewegliche Teile. Kinder,
Haustiere, Hände und Füße
während des Gebrauches
entfernt halten. DEU

ATTENTION Pedal Chrome Rails

Pièces mobiles. Gardez à
l’écart les enfants, les
animaux domestiques, les Lever Wheel Assembly
mains et les peids pendant
l’utilisation.
FR-C

PERSONAL RECORD KEEPING

Tip: It is a great idea to write down the serial numbers of your Octane Fitness elliptical in this Operations
Manual for convenience and easy accessibility to the serial numbers should you have any service needs
with your Octane Fitness elliptical.

ATTENTION – All serial numbers begin with a letter.

Base Serial Number – located below front right chrome rail

__ __ __ __ __ __ __ __ __ __ __ __ __ __

Console Serial Number – located on the underside of the console

__ __ __ __ __ __ __ __ __ __ __ __ __ __

40
TROUBLESHOOTING/FAQs
Electronic Issues
Unit doesn’t power up • Check the connection of the power cord from the machine to the wall outlet.
• Plug a lamp or radio into the outlet to see if the wall outlet has power. If a light
switch controls the outlet, turn it on.
• Check to see that the light on the power supply lights up. If you have verified power
from the outlet, you may have a faulty power supply. Contact your local dealer for
service.

Console displays an • An error code indicates a potentially faulty or improperly installed component in your
“Err” code elliptical cross trainer. Contact your local dealer for service.
Don’t feel a resistance • Increase resistance level to 20 and pedal for 30 seconds. If you feel a difference in
change the resistance, then the brake is working properly.
• Are the cables connected correctly? Unplug and re-plug in the console (you must
remove the console from the console mast to do this). When re-connecting the
cables, make sure you feel the connector snap into place or hear a click that indicates
a proper connection.
• If the issue persists, contact your local dealer for service.
“NO HR” is displayed Heart rate controlled programs require that you wear a wireless chest strap or grasp the
when doing heart rate digital contact heart rate sensors (Q37ce). First, verify that the wireless chest strap is
controlled programs working properly:
• Make sure the electrodes of the chest strap are against your bare skin. The electrodes
are the ribbed portion on the back of the chest strap.
• For better contact, use water to moisten the electrodes on the side of the wireless
chest strap that sits against your skin.
• Make sure the Octane Fitness logo is facing away from your body and is right side
up.
• Make sure you have placed the chest strap at the bottom of your pectoral muscles.
Some adjustment to the strap maybe necessary for the strap to get an accurate
reading.
• Make sure the strap is snug against your body, but not tight enough to restrict
breathing.
• Have someone else try the strap standing next to the machine to see if it works on
him/her.
• There may be interference with another electrical product (lights, TV, personal stereo,
wireless network, MP3 players, phones, etc...). Turn off any other electrical product
and check to see if the problem is resolved.
• The battery in the transmitter (chest strap) may be faulty or worn out; replace the
battery and retest.
• If “NO HR” is still displayed on the console, contact your local dealer for service.

41
“NO HR” is displayed • Grasp each contact heart rate grip sensor so the contact sensor portion of the grip
when doing heart rate rests in the palm of your hand.
controlled programs • Grip the contact sensors firmly and keep your hands steady and in place.
and grasping the • Have someone else try the grips to see if it works for him/her.
contact heart rate • If “NO HR” is still displayed, contact your local dealer for service.
sensors

Heart rate readout Chest strap

seems inaccurate (too • There may be interference with another electrical product (lights, TV, personal stereo,
high or too low) wireless network, MP3 players, phones, etc.). Turn off any other electrical product to
see if there is interference.
• Put water between your skin and the ribbed electrodes on the back of the chest strap.
This can improve the electrical connection.
• Another person in the same workout area may be wearing a chest strap. Have the
person relocate to a distance of 3-4 feet away if possible.
• The chest strap may be too loose. Adjust the elastic strap so that the strap is snug
against your body.
• Have someone else try the transmitter to see if the reading seems accurate for him/
her.
Contact heart rate sensors
• Make sure you are grasping the grips firmly and steadily.
• Have someone else try the grips to see if the reading seems accurate for him/her.
• If the issue persists, contact your local dealer for service.
Console blinks on / off • Check the power cord connections. Make sure the connections are secure from the
transformer into the machine base and the wall outlet.
• Console connections could potentially be faulty. See assembly instructions to check
connections.
• If the issue persists, contact your local dealer for service.
Machine enters pause • This is most likely a speed sensor issue; contact your local dealer for service.
mode after a short
period
LED lights are always • Press and hold the Pause Clear button for five seconds to enter sleep mode.
on
LED display is always • Press the Enter button to stop the LED screen from toggling.
toggling
Console LEDs are not • Enter User Set-up, by pressing and holding the Level (/) keys for three seconds.
bright enough • Press any (/) key until “BRIT” displays in the matrix window.
• Press Enter until the LEDs are set at the desired brightness.
• Press any (/) key until “EXIT” displays in the matrix window, then press Enter.
• If the brightness is set to “8” (the brightest level) and the LEDs are still dim, contact
your local dealer for service.
Unable to activate • Check to see that MOM mode is enabled. Enter User Set-up by pressing and holding
Movement the Level (/) keys for three seconds.
Management (MOM) • Press any (/) key until “MOM” displays in the matrix window.
Mode • Press Enter until “On” is displayed.
• Press any (/) key until “EXIT” displays in the matrix window, then press Enter.
• Press and hold the Program (/)keys for three seconds to activate MOM mode.

42
Console is in sleep • Machine may be in MOM mode; press and hold the Program (/) keys for three
mode and won’t seconds to deactivate MOM mode.
“wake up”
Console does not • Enter User Set-up by pressing and holding the Level(/)keys for three seconds.
“beep” when buttons • Press any (/) key until “BEEP” displays in the matrix window.
are pressed • Press Enter until “On” is displayed.
• Press any (/) key until “EXIT” displays in the matrix window, then press Enter.
• If “BEEP” is set to “On” and the issue persists, contact your local dealer for service.

Mechanical
Issues
Handlebars are loose/ • The screws securing the moving handlebars to the pivot shaft must be very tight. Refer
wobble side-to-side to the assembly instructions to the handlebar covers and tighten these screws.
• If the issue persists, contact your local dealer for service.
Handlebars are loose/ • Contact your local dealer for service.
wobble front-to-back
Machine makes • Clean the chrome rails and wheels with a dry cloth or clean paper towel.
rubbing/scrubbing • DO NOT USE WD-40 or silicone spray on the rails.
noise from roller • If noise persists, contact your local dealer for service.
wheels under pedals
Pedal feels like it is • Clean wheels and chrome rails with a dry cloth or clean paper towel.
thumping • If problem persists, contact your local dealer for service.
Pedal wobbles and • Contact your local dealer for service.
will not track correctly
on chrome rails
Machine wobbles • The adjustable levelers may not be properly set on the machine. There are four
and is unstable on the adjustable levelers, located on the bottom of the Octane Fitness elliptical. See
floor assembly instructions to correctly adjust and lock the levelers.
• If your machine is located on a soft surface such as carpet, purchase a heavy duty
floor mat from your local dealer to place under your machine.
Resistance seems • Machine may be in MOM mode; press and hold the Program (/) keys for three
unusually high seconds to deactivate MOM mode.
• If the issue persists, contact your local dealer for service
Machine makes • Contact your local dealer for service.
ticking/clunking noise.

If you have any questions or need additional assistance please contact Octane Fitness Customer Service
at 888.OCTANE4.

43
 LIMITED CONSUMER WARRANTY
Q37e/Q37ce
NOTE: WARRANTY OUTSIDE OF THE UNITED STATES AND CANADA MAY VARY. THE SERVICE
SECTION OF OUR WEBSITE AT WWW.OCTANEFITNESS.COM CONTAINS ADDITIONAL COUNTRY-
SPECIFIC WARRANTY INFORMATION/LIMITATIONS WHICH MAY ALTER OR AMEND THE FOLLOWING
LIMITED WARRANTY PROVISIONS. PLEASE VISIT THIS WEBSITE TO DETERMINE SUCH WARRANTY
PROVISIONS WITHIN YOUR COUNTRY OF RESIDENCE IF YOU RESIDE IN A COUNTRY OTHER THAN
THE UNITED STATES OR CANADA.

By purchasing this Octane Fitness® Product, You accept all of these terms and conditions.

Warranty registration: You must register your product with Octane Fitness, LLC (“We” or “Us”). You can register
by completing and returning to Octane Fitness the enclosed Warranty Registration Card or register via our web
site at www.octanefitness.com.

What is covered: The Octane Fitness Q37e/Q37ce elliptical (product) is warranted to be free of all defects in
material and workmanship.

Who is covered: The original owner of the product or the person the warranty has been transferred to under
Octane Fitness transferable warranty program.

What is a transferable warranty: As the original owner, Octane Fitness allows you to transfer the warranty
of your product to an individual of your choosing who purchases or is given the product. By filling out a warranty
transfer card and sending it to Octane Fitness, the warranty will be transferred. A warranty transfer card is
included in the Operations Manual or by calling customer service at 888.OCTANE4. The transferable warranty is
not valid to or from commercial settings. The warranty can only be transferred one time.

How long the product is covered: Octane Fitness offers lifetime warranty on the frame of the product. All
parts are warranted for three (3) years from original date of purchase. Labor is covered for one (1) year from
original date of purchase. Warranty outside of the United States and Canada may vary. Please visit
www.octanefitness.com/warranty for further information if you reside in a country other than the
United States or Canada.

DISCLAIMER OF WARRANTIES: THIS WARRANTY IS YOUR EXCLUSIVE REMEDY. EXCEPT AS SET

FORTH HEREIN, WE MAKE NO REPRESENTATIONS OR WARRANTIES REGARDING THE PRODUCT
AND WE EXCLUDE AND DISCLAIM, TO THE EXTENT PERMITTED BY APPLICABLE LAW (INCLUDING
THE MINNESOTA UNIFORM COMMERCIAL CODE, THE UNIFORM COMMERCIAL CODE OF THE STATE
IN WHICH YOU RESIDE, THE SALE OF GOODS ACTS AS ENACTED AND/OR EFFECTIVE WITHIN ANY
CANADIAN PROVINCE OR TERRITORY, ANY SIMILAR CIVIL OR COMMERCIAL CODE WITHIN YOUR
COUNTRY OF RESIDENCE, AND ANY AMENDMENTS TO ANY OF THE FOREGOING FROM TIME TO
TIME), ANY AND ALL IMPLIED WARRANTIES WITH RESPECT TO THE PRODUCT, INCLUDING, WITHOUT
LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, SATISFACTORY QUALITY AND/OR CORRESPONDENCE WITH DESCRIPTION.

44
EXCEPTIONS / LIMITATIONS: In no event shall We be liable to You or any third party for special,
indirect, incidental or consequential damages of any kind, whether based on contract, tort or any
other legal theory. If a court determines that You are entitled to monetary damages in lieu of the
remedies provided herein, Our entire liability shall be limited to the amount actually paid by You for
the Product.

To the extent permitted by applicable law, the substantive law and the law of remedies of the State of Minnesota,
United States of America shall apply to this Warranty, without reference to its principles of conflicts of law.
PURSUANT TO SECTION 6 OF THE 1980 UNITED NATIONS CONVENTION ON CONTRACTS FOR THE
INTERNATIONAL SALE OF GOODS (“CONVENTION”), THE PARTIES HEREBY EXPRESSLY AGREE THAT
THE CONVENTION DOES NOT APPLY TO THIS AGREEMENT OR THE RELATIONSHIP BETWEEN THE
PARTIES. All disputes regarding this Warranty and/or the Product shall be resolved in a state or federal court
with competent jurisdiction located in Hennepin County, State of Minnesota, United States of America. The English
language version of this Warranty shall at all times govern the relationship between the parties notwithstanding
the fact that this Warranty may be translated into a language other than English by any party.

This Warranty does not cover normal or remedial maintenance repairs or damages or defects caused or contributed
to by accident, improper use of the Product, any cause external to the Product or any occurrence beyond Our
control. Any Product misuse, abuse, placement in any application other than in home use or attempt to alter or
repair the Product other than by an authorized Octane Fitness® service provider shall void this Warranty.

Any replacement parts provided hereunder are warranted only for the remainder of the Warranty Period set forth
above. Except as provided above, this Warranty is non-assignable and non-transferable to any third party and
any such attempted assignment or transfer shall be null and void. Our distributors, sales representatives and/or
agents are not authorized to modify or expand the scope of this Warranty and any such attempted or purported
modification or expansion shall be null and void. Product failure due to users in excess of 300 lbs. is not covered.
This warranty does not extend to products used for commercial applications. Parts and electronic
components reconditioned to As New Condition by Octane Fitness or its vendors may sometimes be supplied as
warranty replacement parts and constitute fulfillment of warranty terms. Any warranty replacement parts shall be
warranted for the remainder of the original warranty term.

What you must do: Retain proof of purchase (such as your sales receipt from retailer); operate, and maintain
the Product as specified in the Operations Manual; notify your retailer or our Customer Service Department of any
defect within ten (10) days after discovery of defect; and as instructed, return any defective part for replacement
or, if necessary, the entire product for repair. Octane Fitness reserves the right to determine if the entire machine
will be replaced.

Operations Manual: It is VERY IMPORTANT THAT ALL USERS READ THE MANUAL before operating the Product.
Failure to comply with any use requirements may void this Warranty.

How to get parts and service: Simply call the retailer where you purchased the product or the Octane Fitness
Customer Service Department at 888.OCTANE4 and tell them your name and address and the serial numbers for
your product. Each product has two serial numbers. The console serial number can be found on the bottom
of the console. The base serial number can be found on the rail support plate, below the power cord connection.
Please have both serial numbers when you call.

Machine Noise Information Regulation - 3. GPSGV, the highest noise level is 70 dB(A) or less.

45
Warranty Transfer Card

As the original owner, Octane Fitness allows you to transfer the balance of the warranty of your product to an
individual of your choosing who purchases or is given the product.
By filling out a warranty transfer card and sending it to Octane Fitness with a copy of the original receipt, the
warranty will be transferred. Please make two copies of this form and the original receipt one for your records
and one for the new owner.
Octane Fitness offers lifetime warranty on the frame of the product. All parts are warranted for three years from
original date of purchase. Labor is covered for one year from original date of purchase.

This form should only be used by the original owner when selling or giving a used product to a new
owner.

Please detach form below and send to:

Octane Fitness
9200 Wyoming Avenue North
Suite 380
Brooklyn Park, MN 55437
Fax: 763-323-2064

-------------------------------------------------------------
Original Owner New Owner

Name: Name:

Address: Address:

City: City:

State: Zip: State: Zip:

Dealer: Model:

Base Serial Number __ __ __ __ __ __ __ __ __ __ __ __ __ __

Console Serial Number __ __ __ __ __ __ __ __ __ __ __ __ __ __

Date Purchased:

Original Owner Signature: Date:

New Owner Signature: Date:

46
Date Purchased:

Base Serial Number __ __ __ __ __ __ __ __ __ __ __ __ __ __

Console Serial Number __ __ __ __ __ __ __ __ __ __ __ __ __ __

Store:

Store Phone #:

Salesperson:

47
 Are you passionate about your workout and the results?

Share your story with others on the Octane Fitness web site.
Go to: www.octanefitness.com/testimonials
Then click on “Share My Story” and
show the world how fueled you are.

F UEL Y O UR LI F E ™

9200 Wyoming Avenue North.

Suite 380
Brooklyn Park, MN 55437
888.OCTANE4
www.octanefitness.com

© 2009 Octane Fitness, LLC. All rights reserved. Octane Fitness, DedicatedLogic, Fuel Your Life, HeartLogic, Now-Zone, X-Mode, ArmBlaster,
GluteKicker, and CROSS-CiRCUIT are registered trademarks of Octane Fitness. Any use of these trademarks, without the express written consent of
Octane Fitness, is forbidden.

103335-001 REV B

48