Scribd
Upload
199 views1 page

KMS020D3 Specification

This document specifies a modular air cooled heat pump unit with the following key details: 1. It has a cooling capacity of 66.4kW and total power of 17.2kW running on a 3-phase 380V 60Hz power supply. 2. It uses two hermetic scroll compressors powered by 25.8kW each and cools 11.4m3/h of water from 20°C to 15°C with a pressure drop of 45 kPa. 3. The unit weighs 800kg, has dimensions of 1080Lx2275Wx2020H and includes protections such as high/low pressure switches and motor overheat protection.

Uploaded by

Fredie Labrador
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
199 views1 page

KMS020D3 Specification

This document specifies a modular air cooled heat pump unit with the following key details: 1. It has a cooling capacity of 66.4kW and total power of 17.2kW running on a 3-phase 380V 60Hz power supply. 2. It uses two hermetic scroll compressors powered by 25.8kW each and cools 11.4m3/h of water from 20°C to 15°C with a pressure drop of 45 kPa. 3. The unit weighs 800kg, has dimensions of 1080Lx2275Wx2020H and includes protections such as high/low pressure switches and motor overheat protection.

Uploaded by

Fredie Labrador
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Modular Air Cooled Heat Pump Unit Specification

Client
Model KMS020D3-01
Cooling capacity 66.4kW
Power supply 3-380V-60Hz
Unit total power 17.2kW
Compressor Type Hermetic scroll compressor
Quantity 2 (1 modular )
Refrigerant R-410a
Input power 25.8 kW
Cooling Chilled water 11.4m3/h
condition inlet temperature
Water inlet 20℃
temperature
Water outlet 15℃
temperature
Water pressure 45 kPa
drop
Water side Type Shell and tube type
heat Pipe diameter 2” FLG.(DN 50 FLG)*1 set
exchanger
Work pressure 1.0 MPa
Test pressure 2.5 MPa
Type Copper tube and aluminum fin type
Air side heat
exchanger Fan Axial flow fan
Motor power 1.5kW
Capacity regulating 0-50%-100%
Noise 73.5dB(A)
Protection High and low pressure switch, motor over-heat protection, water
temperature too high or too low, compressor current detection, etc.

Operation weight 800 kg


Dimension 1080L2275W2020H
Note :
1. Cooling capacity is based on ambient temperature 35℃ DB
2. Cooling mode operation ambient temperature range:15℃～45℃;
3. Microcomputer control.
4. Unit total power contains condensate fan power.
5. Client sign :

You might also like