Scribd
Upload
273 views1 page

RYC TB6600-T4 General Picture

The document provides a diagram and description of the TB6600-T4 general picture. It includes interfaces for control signals, power input, and signals that can connect to a mach3 interface board. It also shows the locations of LED indicators, microstep setting switch, output current regulation, and stepper motor outputs for the X, Y, Z, and A axes. A 36V 350W switching power supply is recommended.

Uploaded by

Fernando Queiroz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
273 views1 page

RYC TB6600-T4 General Picture

The document provides a diagram and description of the TB6600-T4 general picture. It includes interfaces for control signals, power input, and signals that can connect to a mach3 interface board. It also shows the locations of LED indicators, microstep setting switch, output current regulation, and stepper motor outputs for the X, Y, Z, and A axes. A 36V 350W switching power supply is recommended.

Uploaded by

Fernando Queiroz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

TB6600-T4 general picture

Control signal input 12V 2A power Signal input


interface 1, connected with output interface for interface 2, used
mach3 interface board or powering the with our mach3
other controller interface board or interface board V8
other controller

A Axis stepper

1 Power LED 4 Z Axis stepper


5 2 3
2 Running LED

3 Alarm LED

5 4
4 Microstep 2 3
setting switch Y Axis stepper

5 Output current
regulation 5
2 3 4
X Axis stepper

5 2 3
4
1

Power: +14V-40VDC
Recommended: 36V 350W
Switching Power Supply

You might also like