PARTS LIST MANUAL

ES-6 SERIES
STANDARD & 24KT
5, 7,5 AND 10 HP / 4, 5.5 AND 7.5 KW

PART NUMBER:
02250173-919-R00
KEEP FOR
FUTURE
REFERENCE
WARRANTY NOTICE
Failure to follow the instructions and ©SULLAIR CORPORATION
procedures in this manual or, misuse The information in this manual is current as of its publication
date, and applies to compressor serial number:
of this equipment will VOID its
warranty! 200711050000
and all subsequent serial numbers
 AIR CARE SEMINAR TRAINING

Sullair Air Care Seminars are courses that provide hands-on instruction for the proper operation, maintenance, and
servicing of Sullair products. Individual seminars on Industrial compressors and compressor electrical systems are offered
at regular intervals throughout the year at Sullair’s corporate headquarters training facility located at Michigan City, Indiana.

Instruction includes training on the function and installation of Sullair service parts, troubleshooting common faults and
malfunctions, and actual equipment operation. These seminars are recommended for maintenance, contractor
maintenance, and service personnel.

For detailed course outlines, schedule, and cost information contact:

Sullair Customer Care Training Department

1-888-SULLAIR or
219-879-5451 (ext. 5623)
www.sullair.com

- Or Write -
Sullair Corporation
3700 E. Michigan Blvd.
Michigan City, IN 46360
Attn: Service Training Department.
 TABLE OF CONTENTS

PAGE SECTION DESCRIPTION PAGE SECTION DESCRIPTION

1 1.1 PROCEDURE FOR ORDERING PARTS 38 1.20 ENCLOSURE

2 1.2 MAINTENANCE PARTS LIST 40 1.21 DECAL GROUP

4 1.3 FRAME AND MOUNTING - OPEN 44 1.22 DECAL LOCATIONS - ES-6 OPEN
STANDARD
6 1.4 FRAME AND MOUNTING - STANDARD
AND ENCLOSURE 46 1.23 DECAL LOCATIONS - ES-6 ENCLOSED
STANDARD
8 1.5 FRAME AND MOUNTING - TANK-
MOUNTED ENCLOSURE 48 1.24 DECAL LOCATIONS - ES-6 ENCLOSED
TANK-MOUNTED
10 1.6 FLUID MANAGEMENT SYSTEM
50 1.25 DECAL LOCATIONS - ES-6 OPEN
12 1.7 INLET FILTER TANK-MOUNTED
13 1.8 SEAL AND DRIVE GEAR 52 1.26 DRYER OPTION - SCF40/SRS25
(SRS-9)
14 1.9 MOTOR, HOUSING AND PARTS
54 1.27 DRYER OPTION - SCF40/SRS35
16 1.10 COMPRESSOR COOLING SYSTEM
(SRS-12)
18 1.11 COMPRESSOR SYSTEM
56 1.28 DRYER OPTION - SCF65/SRS50
22 1.12 INLET CONTROL (SRS-18)

24 1.13 RECEIVER TANK - OPEN 58 1.29 DRYER OPTION - SCF125/SRS75

(SRS-24)
26 1.14 RECEIVER TANK - ENCLOSED

28 1.15 RECEIVER TANK - OPEN WITH

DRYER

30 1.16 RECEIVER TANK - ENCLOSED WITH

DRYER

32 1.17 CONTROL BOX - STANDARD

34 1.18 CONTROL BOX - WYE-DELTA

36 1.19 CONTROL BOX - WYE-DELTA -

DECALS, ETC.
Section 1 - ILLUSTRATION AND PARTS LIST ES-6 SERIES PART LIST MANUAL

1.1 PROCEDURE FOR ORDERING PARTS

Parts should be ordered from the nearest Sullair Representative or the Representative from whom the compressor was purchased. If for any reason
parts cannot be obtained in this manner, contact the factory directly at the address, phone numbers or fax numbers below.
When ordering parts always indicate the Serial Number of the compressor. This can be obtained from the Bill of Lading for the compressor or from
the Serial Number Plate located on the compressor. See Figure 1-1 Serial Plate / Serial Number Location.
The genuine Sullair service parts listed meet or exceed the demands of this compressor. Use of replacement parts other than those approved by
Sullair Corporation may lead to hazardous conditions over which Sullair Corporation has no control. Such conditions include, but are not limited to,
bodily injury and compressor failure.

SULLAIR CORPORATION SULLAIR ASIA, LTD. SULLAIR EUROPE, S.A. CHAMPION COMPRESSORS, LTD.
3700 East Michigan Boulevard Sullair Road, No. 1 Zone Des Granges BP 82 Princess Highway
Michigan City, Indiana 46360 U.S.A Chiwan, Shekuo 42602 Montbrison, France Hallam, Victoria 3803
www.sullair.com Shenzhen, Guangdong PRV. Telephone: 33-477968470 Austrailia
Telephone: 1-800-SULLAIR (U.S.A. only) PRC POST CODE 518068 Fax: 33-477968499 Telephone: 61-3-9796-4000
Fax: 219-874-1273 Telephone: 755-6851686 www.sullaireurope.com Fax: 61-3-9703-8053
CUSTOMER CARE for PARTS and SERVICE Fax: 755-6853473 www.championcompressors.com.au
1-888-SULLAIR (785-5247) www.sullair-asia.com
219-874-1835

Figure 1-1 Serial Plate / Serial Number Location

1
ES-6 SERIES PART LIST MANUAL Section 1 - ILLUSTRATION AND PARTS LIST

1.2 MAINTENANCE PARTS LIST

KEY NO. ORDER PART NO. QTY DESCRIPTION NOTE
ELEMENTS
1 250028-032 1 replacement element kit for fluid filter 250026-982
2 250028-033 1 replacement element kit for air/fluid separator 250025-264
3 02250111-804 1 replacement element kit for air filter 02250111-680
4 02250172-109 1 filter, clean air inlet option es6
KITS
5 250028-035 1 repair kit for motor shaft seal 02250100-823
6 250034-267 1 repair kit, shaft seal installation
7 250028-036 1 repair kit for thermostat actuator 250025-413
8 02250160-743 1 repair kit for solenoid valve 02250125-655
• 02250125-856 1 replacement coil for solenoid valve 02250125-655
9 250019-453 1 repair kit for regulator valve 250017-280
10 250030-226 1 repair kit for minimum pressure/check valve 604131
11 02250045-287 1 replacement piston seal kit for air inlet control valve
12 02250044-811 1 replacement piston for inlet control valve
13 02250045-287 1 replacement washer for inlet control valve
14 250030-103 1 repair kit for ES-6 1/2" npt service connection 250026-066
15 02250172-758 1 replacement kit for hoses srs 25-35
16 02250172-759 1 replacement kit for hoses srs 50-75
17 02250153-289 1 replacement for dryer pre-filter scf-40n/b
18 02250153-290 1 replacement for dryer pre-filter scf-65n/b
19 02250153-291 1 replacement for dryer pre-filter scf-125n/b
Continued on page 3
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR

2
Section 1 - ILLUSTRATION AND PARTS LIST ES-6 SERIES PART LIST MANUAL

1.2 MAINTENANCE PARTS LIST (CONTINUED)

KEY NO. ORDER PART NO. QTY DESCRIPTION NOTE
FLUID
20 250009-396 - fluid, Sullube (one gallon) (I)
21 250022-669 - fluid, Sullube (five gallons) (I)
22 02250051-153 - fluid, 24 KT (five gallons) (I)
23 250019-662 - fluid, SRF 1/4000 (five gallons) (I)
(I) For proper amount of fluid fill, please consult Lubrication Guide in Section 3, Specifications in the User’s Manual.

CAUTION!
Mixing of other lubricants within the compressor
unit will void all warranties.

PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR

3
ES-6 SERIES PART LIST MANUAL Section 1 - ILLUSTRATION AND PARTS LIST

1.3 FRAME AND MOUNTING - OPEN

02250170-709R00

4
Section 1 - ILLUSTRATION AND PARTS LIST ES-6 SERIES PART LIST MANUAL

1.3 FRAME AND MOUNTING - OPEN

N
Q
KEY PART O
T DESCRIPTION
NO. NO. T
Y
E

1 02250157-279 1 wire, ground bond 12" 10 ga

2 02250170-515 1 support, shipping es6 tm open
3 02250170-523 4 isolator, vibration 3/4" x 1-1/4" x 93#
4 825304-236 2 nut, hex f pltd 1/4-20
5 825305-283 8 nut, hex f pltd 5/16-18
6 829704-075 1 screw, hex ser washer 1/4-20 x 3/4
7 838204-071 4 washer, pl-b reg pltd 1/4
8 838404-028 2 washer, lock ext tooth 1/4
9 882508-125 1 nut, serr flng m8 x 1.25
10 882608-020 1 screw, hex serr washer m8 x 20
11 various 1 es6 unit (I)
(I) This part may vary per machine design. Consult factory with
machine serial number to determine the proper part number.

PLEASE NOTE: WHEN ORDERING PARTS,

INDICATE SERIAL NUMBER OF COMPRESSOR

5
ES-6 SERIES PART LIST MANUAL Section 1 - ILLUSTRATION AND PARTS LIST

1.4 FRAME AND MOUNTING - STANDARD ENCLOSURE

02250170-71000

6
Section 1 - ILLUSTRATION AND PARTS LIST ES-6 SERIES PART LIST MANUAL

1.4 FRAME AND MOUNTING - STANDARD ENCLOSURE N

Q
N KEY PART O
Q T DESCRIPTION
KEY PART O NO. NO. T
T DESCRIPTION Y
NO. NO. T E
Y
E
PLEASE NOTE: WHEN ORDERING PARTS,
1 02250157-281 1 wire, ground bond 24" 10 ga INDICATE SERIAL NUMBER OF COMPRESSOR
2 02250170-201 1 frame, base pan es6
3 02250170-229 2 rail, encl bse es6 std
4 02250170-230 1 support, shipping es6 encl
5 02250170-523 4 isolator, vibration 3/4" x 1-1/4" x 93#
6 02250172-063 4 gasket, seal es6 encl vib mnt
7 825304-236 2 nut, hex f pltd 1/4-20
8 825305-283 4 nut, hex f pltd 5/16-18
9 829704-075 1 screw, hex ser washer 1/4-20 x 3/4
10 838204-071 4 washer, pl-b reg pltd 1/4
11 838404-028 2 washer, lock ext tooth 1/4
12 872708-127 6 washer, sealing m8
13 882508-125 1 nut, serr flng m8 x 1.25
14 882608-016 1 screw, hex serr washer m8 x 16
15 883008-016 6 screw, tf-hex m8 x 16 blk zinc
16 various 1 es6 unit (I)
A1 02250171-081 1 hose, 3/4 encl 5 hp es6
• 02250171-082 1 hose, 3/4 encl 7.5-10 hp es6
A2 860112-050 2 conn, 37 fl/mpt pltd 3/4 x 1/2
A3 841500-008 1 bulkhead, pipe 1/2” npt
(I) This part may vary per machine design. Consult factory with
machine serial number to determine the proper part number.

7
ES-6 SERIES PART LIST MANUAL Section 1 - ILLUSTRATION AND PARTS LIST

1.5 FRAME AND MOUNTING - TANK-MOUNTED ENCLOSURE

02250170-712R00

8
Section 1 - ILLUSTRATION AND PARTS LIST ES-6 SERIES PART LIST MANUAL

1.5 FRAME AND MOUNTING - TANK-MOUNTED ENCLOSURE N

Q
N KEY PART O
Q T DESCRIPTION
KEY PART O NO. NO. T
T DESCRIPTION Y
NO. NO. T E
Y
E
• 02250172-678 1 hose, 3/4 unit/tnk encl l/dr 120
1 02250154-659 1 trim, clip-on grip 185-260duq (I) This part may vary per machine design. Consult factory with
2 02250157-279 1 wire, ground bond 12" 10 ga machine serial number to determine the proper part number.

3 02250157-281 1 wire, ground bond 24" 10 ga PLEASE NOTE: WHEN ORDERING PARTS,
4 02250170-201 1 frame, base pan es6 INDICATE SERIAL NUMBER OF COMPRESSOR

5 02250170-230 1 support, shipping es6 encl

6 02250170-523 4 isolator, vibration 3/4" x 1-1/4" x 93#
7 02250172-063 4 gasket, seal es6 encl vib mnt
8 408300-006 1 clamp, hose 7/8" i.d.
9 825304-236 3 nut, hex f pltd 1/4-20
10 825305-283 4 nut, hex f pltd 5/16-18
11 829704-100 2 screw, hex ser washer 1/4-20 x 1
12 838204-071 8 washer, pl-b reg pltd 1/4
13 838404-028 4 washer, lock ext tooth 1/4
14 872708-127 6 washer, sealing m8
15 882508-125 8 nut, serr flng m8 x 1.25
16 882608-016 1 screw, hex serr washer m8 x 16
17 882608-025 6 screw, hex serr washer m8 x 25
18 various 1 es6 unit (I)
A1 02250171-083 1 hose, 3/4 unit/tnk opn w/dr
• 02250172-676 1 hose, 3/4 unit/tnk opn l/dr
• 02250172-675 1 hose, 3/4 unit/tnk encl w/dr 80
• 02250171-084 1 hose, 3/4 unit/tnk encl w/dr 120
• 02250172-677 1 hose, 3/4 unit/tnk encl l/dr 80

9
ES-6 SERIES PART LIST MANUAL Section 1 - ILLUSTRATION AND PARTS LIST

1.6 FLUID MANAGEMENT SYSTEM

10
Section 1 - ILLUSTRATION AND PARTS LIST ES-6 SERIES PART LIST MANUAL

1.6 FLUID MANAGEMENT SYSTEM

N
Q
N KEY PART O
Q T DESCRIPTION
KEY PART O NO. NO. T
T DESCRIPTION Y
NO. NO. T E
Y
E
(III) For maintenance on fluid filter element no. 250026-982, order
1 250039-359 1 plug, hex head 1 1/16"-12 SAE repair kit no. 250028-032.
2 250025-419 3 o-ring (I) (IV) For maintenance on thermostat actuator no. 250025-413,
order repair kit no. 250028-036.
3 250025-309 1 housing, bell
(V) Decal will vary with compressor fluid fill requirement. Factory
4 826502-127 1 o-ring, 1 7/16" x 1/16" fill (Sullube) decal part no. is 02250069-389.
5 250025-264 1 element, separator air/fluid (II) PLEASE NOTE: WHEN ORDERING PARTS,
6 826502-139 1 o-ring, 2 3/16" x 3/32" INDICATE SERIAL NUMBER OF COMPRESSOR
7 250026-038 1 cap, separator element
8 250026-982 1 element, fluid filter (III)
9 250025-914 1 adapter, fluid filter
10 250025-420 1 glass, sight
11 250025-418 1 plug, thermostat 1 1/16"-12
12 250025-417 1 guide, thermostat spring
13 827404-150 1 pin, roll 1/4" x 1 1/2"
14 250025-464 1 spring, compression
15 250025-415 1 piston, thermostat
16 250025-413 1 actuator, thermostat (IV)
17 828408-300 12 capscrew, ferry hd 1/2"-13 x 3"
• 829312-080 12 capscrew, socket ISO4762 m 12 x
80 (metric)
18 - 1 decal, fluid (V)
(I) For replacement only.
(II) For maintenance on air/fluid separator element no. 250025-
264, order repair kit no. 250028-033.

11
ES-6 SERIES PART LIST MANUAL Section 1 - ILLUSTRATION AND PARTS LIST

1.7 INLET FILTER 1.7 INLET FILTER

N
Q
KEY PART O
T DESCRIPTION
NO. NO. T
Y
E

1 02250111-679 1 filter, assembly (I)

2 824815-004 1 nut, wing 1/4"-20
3 250025-661 1 washer, seal
4 02250111-681 1 hood, air filter
5 02250111-680 1 element, air filter
6 250025-423 1 plate, air filter base
7 843504-072 1 rod, threaded 1/4" x 7.25"
8 02250111-683 1 pre-filter, heavy duty
(I) For maintenance on air filter assembly no. 02250111-679, order
repair kit no. 02250111-804.
PLEASE NOTE: WHEN ORDERING PARTS,
INDICATE SERIAL NUMBER OF COMPRESSOR

12
Section 1 - ILLUSTRATION AND PARTS LIST ES-6 SERIES PART LIST MANUAL

1.8 SEAL AND DRIVE GEAR

1.8 SEAL AND DRIVE GEAR N

Q
N KEY PART O
Q T DESCRIPTION
KEY PART O NO. NO. T
T DESCRIPTION Y
NO. NO. T E
Y
E
8 250025-312 1 housing, shaft seal
1 250028-339 1 plate, inlet 9 828404-075 2 capscrew, ferry head 1/4" - 20 x 3/4"
2 499082-705 1 bearing, cylinder roll plain 10 826502-150 1 o-ring, 2 7/8" x 3/32"
3 consult factory 1 gear, driven (I) For maintenance on motor shaft seal no. 02250100-823, order
4 consult factory 1 gear, drive repair kit no. 250028-035.

5 250039-600 1 spacer, gear NOTE: Requires special tooling for removal/installation.

6 250025-412 1 sleeve, wear PLEASE NOTE: WHEN ORDERING PARTS,
7 02250100-823 1 seal, shaft Teflon/Viton (I) INDICATE SERIAL NUMBER OF COMPRESSOR

13
ES-6 SERIES PART LIST MANUAL Section 1 - ILLUSTRATION AND PARTS LIST

1.9 MOTOR, HOUSING AND PARTS

14
Section 1 - ILLUSTRATION AND PARTS LIST ES-6 SERIES PART LIST MANUAL

1.9 MOTOR, HOUSING AND PARTS N

Q
N KEY PART O
Q T DESCRIPTION
KEY PART O NO. NO. T
T DESCRIPTION Y
NO. NO. T E
Y
E
19 250026-469 1 base, compressor
1 810210-050 1 connector, tube-M 5/8" x 1/2" 20 810208-050 1 connector, tube-M 1/2" x 1/2"
2 250039-904 1 bail, lifting A1: If the addition of fluid becomes frequent, a problem has devel-
3 827905-088 1 capscrew, hex 5/16"-18 x 7/8" oped. By removing lower plug, fluid may spill from hole; a shaft seal
4 604131 1 group, minimum pressure valve (I) failure may exist.
(I) For maintenance on minimum pressure valve group no.
5 250030-547 1 screw, machine rd hd #8-32 x 1/2" 604131, order repair kit no. 250030-226.
6 837201-045 1 washer, pl-b #8
PLEASE NOTE: WHEN ORDERING PARTS,
7 250030-223 1 seat, minimum pressure/check INDICATE SERIAL NUMBER OF COMPRESSOR
valve
8 250030-502 1 stem, minimum pressure/check
valve
9 250033-369 1 spring, minimum pressure/check
valve
10 250025-428 1 piston, minimum pressure/check
valve
11 826502-116 1 o-ring, 3/32" x 3/4"
12 250025-429 1 spring, minimum pressure/check
valve
13 250025-430 1 cap, minimum pressure/check valve
14 409955 1 valve, relief 1/2" 175# (12.1 bar)
• 250006-938 1 valve, relief 1/2" 200# (13.8 bar)
15 02250099-448 1 switch, temperature 230°F NC
16 490046-001 2 plug, pipe hex soc 1/8" NPT
17 838208-112 2 washer, reg 1/2"
18 829108-100 2 capscrew, hex GR8 1/2"-13 x 1"

15
ES-6 SERIES PART LIST MANUAL Section 1 - ILLUSTRATION AND PARTS LIST

1.10 COMPRESSOR COOLING SYSTEM

16
Section 1 - ILLUSTRATION AND PARTS LIST ES-6 SERIES PART LIST MANUAL

1.10 COMPRESSOR COOLING SYSTEM N

Q
N KEY PART O
Q T DESCRIPTION
KEY PART O NO. NO. T
T DESCRIPTION Y
NO. NO. T E
Y
E
A1: To compressor drain
1 250026-471 1 duct, cooler motor 210 frame A2: Oil cooler (out) to compressor (in)
• 250026-472 1 duct, cooler motor 180 frame A3: From compressor (out) to aftercooler (in)
2 829704-050 8 screw, hex serrated washer 1/4"-20 A4: Discharge air
x 1/2"
PLEASE NOTE: WHEN ORDERING PARTS,
3 250034-536 1 ring, aftrclr 210 frame INDICATE SERIAL NUMBER OF COMPRESSOR
• 250034-535 1 ring, aftrclr 180 frame
4 consult factory 1 motor
5 250028-964 1 guard, fan
6 consult factory 1 fan, 12" dia
7 250031-014 1 screw, brass set
8 250034-537 1 ring, orifice
9 250034-538 8 insert, 1/4"-20 threaded blind
10 825305-283 1 nut, hex 5/16"-18
11 250026-843 1 plate, cooler filler
12 250026-066 1 cooler, fluid
13 250025-830 2 washer, flat 5/16" x 1 1/4"
14 828405-200 2 capscrew, ferry hd 5/16"-18 x 2"
15 811610-088 1 elbow, tube 5/8" x 7/8"
16 250030-042 1 tubing, aftercooler in
17 02250172-824 1 tube, fluid cooler out es6
18 811808-075 2 connector, tube 1/2" x 3/4"
19 250030-104 1 elbow, tube 7/8" x 1/2"
20 250030-043 1 tubing, fluid cooler out

17
ES-6 SERIES PART LIST MANUAL Section 1 - ILLUSTRATION AND PARTS LIST

1.11 COMPRESSOR SYSTEM

18
Section 1 - ILLUSTRATION AND PARTS LIST ES-6 SERIES PART LIST MANUAL

1.11 COMPRESSOR SYSTEM1 N

Q
N KEY PART O
Q T DESCRIPTION
KEY PART O NO. NO. T
T DESCRIPTION Y
NO. NO. T E
Y
E
24 250025-835 1 tee, tube 1/4"
1 828404-125 5 capscrew, ferry hd 1/4"-20 x 1 1/4" 25 839608-060 2 screw, drive rod plated #8 x 3/8"
2 250025-315 1 cover, outlet 26 250026-859 1 plate, identification
3 02250055-135 1 locknut, female M17 x 1 27 499082-705 1 bearing, cylinder roll plain
4 02250055-485 1 wavespring, female 28 250030-545 1 orifice, gear spray (mounting loca-
5 499080-203 2 bearing, taper tion)
6 02250055-135 1 locknut, male M25 x 1 29 250023-213 1 bearing, needle roller steel
7 02250047-887 1 wavespring, male 30 250025-435 1 retainer, inlet bearing
8 499025-005 2 bearing, taper 31 831204-050 1 screw, machine flat head 1/4"-20 x
9 828405-100 3 capscrew, ferry hd 5/16"-18 x 1" 1/2"

10 865308-150 1 washer, metric elt sm 8 x 15 32 828405-150 2 capscrew, ferry hd 5/16"-18 x 1 1/2"

11 828304-025 2 capscrew, socket hd 1/4"-20 x 1/4" 33 250025-865 1 tube, separator fluid return

12 250029-910 1 housing, stator 34 250025-870 1 fitting, separator fluid return

13 828405-225 2 capscrew, ferry hd 5/16"-18 x 2 1/4" 35 250025-414 1 valve, body thermostat (II)

14 499065-007 2 washer, seal 36 250033-368 1 screw, set cup 5/8"-11 x 1/2"

15 499045-032 4 pin, dowel 3/8" x 1" 37 810208-038 1 conn, tube-m 1/2 X 3/8"

16 02250055-489 1 rotor, female "E" profile 38 250041-956 1 tee, tube

17 02250055-490 1 rotor, male "E" profile 39 250034-001 1 base, compressor

(I) For maintenance on pressure regulator valve no. 250017-280,
18 829106-375 2 capscrew, ferry hd 3/8"-16 x 3 3/4"
order repair kit no. 250019-453.
19 250030-828 1 plate, inlet (II) For maintenance on thermostat, order repair kit no. 250028-
20 02250054-86 1 hose, nylon 1/4" 036.
21 250025-850 3 elbow, tube 90°M 1/4" x 1/4" Continued on page 21
22 823204-000 1 nipple, pipe 1/4"NPT x close PLEASE NOTE: WHEN ORDERING PARTS,
23 250017-280 1 valve, regulator (I) INDICATE SERIAL NUMBER OF COMPRESSOR

19
ES-6 SERIES PART LIST MANUAL Section 1 - ILLUSTRATION AND PARTS LIST

1.11 COMPRESSOR SYSTEM (CONTINUED)

20
Section 1 - ILLUSTRATION AND PARTS LIST ES-6 SERIES PART LIST MANUAL

1.11 COMPRESSOR SYSTEM (CONTINUED)

N
Q
KEY PART O
T DESCRIPTION
NO. NO. T
Y
E

40 838206-071 2 washer, reg 3/8"

41 829106-075 2 capscrew, ferry hd 3/8"-16 x 3/4"
42 804415-010 1 tee, pipe 1/4"
43 823204-025 1 nipple, pipe 1/4" x 2 1/2"
44 250028-454 1 valve, ball 1/4"
45 02250172-093 1 valve, ball mini f x f 3/8” viton
46 02250170-525 1 tube, fluid drain es6 w/ encl
47 866900-015 1 plug, pipe 3/8” 3000# stl plt
A1: To “in” solenoid valve
A2: To pressure gauge
A3: To air inlet
A4: To “out” solenoid valve
PLEASE NOTE: WHEN ORDERING PARTS,
INDICATE SERIAL NUMBER OF COMPRESSOR

21
ES-6 SERIES PART LIST MANUAL Section 1 - ILLUSTRATION AND PARTS LIST

1.12 INLET CONTROL

22
Section 1 - ILLUSTRATION AND PARTS LIST ES-6 SERIES PART LIST MANUAL

1.12 INLET CONTROL

N
Q
KEY PART O
T DESCRIPTION
NO. NO. T
Y
E

1 02250044-810 1 rod, intake control valve

2 250034-619 1 spring, intake check
3 02250044-809 1 retainer, intake control valve
4 250025-425 1 gasket, inlet valve
5 02250044-808 1 head, intake control valve
6 250025-310 1 housing, intake control (I)
7 02250054-861 hose, nylon 1/4"
8 250025-849 1 elbow, 90°M 1/8"npt x 1/4" tube
9 02250044-811 1 piston, intake control valve
10 02250044-671 1 seal, intake control piston
11 250031-269 2 washer, Belleville spring
12 02250043-162 1 capscrew, #10-32 x 1/2" Nylok
13 02250042-966 1 spring, inlet control
14 250029-898 1 cap, air intake
15 836150-137 1 ring, retaining internal 1 3/8"
(I) For maintenance on inlet control valve, order replacement pis-
ton seal kit no. 02250045-287, and replacement piston no.
02250044-811.
PLEASE NOTE: WHEN ORDERING PARTS,
INDICATE SERIAL NUMBER OF COMPRESSOR

23
ES-6 SERIES PART LIST MANUAL Section 1 - ILLUSTRATION AND PARTS LIST

1.13 RECEIVER TANK - OPEN

02250172-397R00

24
Section 1 - ILLUSTRATION AND PARTS LIST ES-6 SERIES PART LIST MANUAL

1.13 RECEIVER TANK - OPEN

N
Q
KEY PART O
T DESCRIPTION
NO. NO. T
Y
E

1 02250172-112 1 tank, assembly es6 80 gal

• 02250172-113 1 tank, assy es6 120 gal
2 047115 1 valve, ball 1/4" npt
3 250006-938 1 valve, pressure relief 200 psig
4 807800-050 1 plug, pipe 1 1/4" 3000# stl
5 860212-075 1 elbow, 37fl 90m 3/4 x 3/4
6 866215-010 1 elbow, pipe 90 deg plt 1/4"
7 866304-010 1 nipple, pipe pltd 1/4 x 1
8 866304-015 1 nipple, pipe pltd 1/4 x 1 1/2
9 868905-030 1 bushing, red hex pltd 1 1/4 x 3/4
A1: From unit
A2: Tank drain
PLEASE NOTE: WHEN ORDERING PARTS,
INDICATE SERIAL NUMBER OF COMPRESSOR

25
ES-6 SERIES PART LIST MANUAL Section 1 - ILLUSTRATION AND PARTS LIST

1.14 RECEIVER TANK - ENCLOSED

02250172-395R00

26
Section 1 - ILLUSTRATION AND PARTS LIST ES-6 SERIES PART LIST MANUAL

1.14 RECEIVER TANK - ENCLOSED•

N
Q
KEY PART O
T DESCRIPTION
NO. NO. T
Y
E

1 02250172-112 1 tank, assembly es6 80 gal

• 02250172-113 1 tank, assembly es6 120 gal
2 047115 1 valve, ball 1/4" npt
3 250006-938 1 valve, pressure relief 200 psig
4 807800-050 1 plug, pipe 1 1/4" 3000# stl
5 860212-075 2 elbow, 37fl 90m 3/4 x 3/4
6 866215-010 1 elbow, pipe 90 deg plt 1/4"
7 866304-010 1 nipple, pipe pltd 1/4 x 1
8 866304-015 1 nipple, pipe pltd 1/4 x 1 1/2
9 868905-030 2 bushing, red hex pltd 1 1/4 x 3/4
A1: From unit
A2: Tank drain
PLEASE NOTE: WHEN ORDERING PARTS,
INDICATE SERIAL NUMBER OF COMPRESSOR

27
ES-6 SERIES PART LIST MANUAL Section 1 - ILLUSTRATION AND PARTS LIST

1.15 RECEIVER TANK - OPEN WITH DRYER

02250172-393R00

28
Section 1 - ILLUSTRATION AND PARTS LIST ES-6 SERIES PART LIST MANUAL

1.15 RECEIVER TANK - OPEN WITH DRYER

N
Q
KEY PART O
T DESCRIPTION
NO. NO. T
Y
E

1 02250172-112 1 tank, assembly es6 80 gal

• 02250172-113 1 tank, assembly es6 120 gal
2 047115 1 valve, ball 1/4" npt
3 250006-938 1 valve, pressure relief 200 psig
4 860212-075 2 elbow, 37fl 90m 3/4 x 3/4
5 866215-010 1 elbow, pipe 90 deg plt 1/4"
6 866304-010 1 nipple, pipe pltd 1/4 x 1
7 866304-015 1 nipple, pipe pltd 1/4 x 1 1/2
8 866900-050 1 plug, pipe 1 1/4" 3000# stl plt
9 868905-030 2 bushing, red hex pltd 1 1/4 x 3/4
A1: From unit
A2: To dryer filter assembly
A3: Tank drain
PLEASE NOTE: WHEN ORDERING PARTS,
INDICATE SERIAL NUMBER OF COMPRESSOR

29
ES-6 SERIES PART LIST MANUAL Section 1 - ILLUSTRATION AND PARTS LIST

1.16 RECEIVER TANK - ENCLOSED WITH DRYER

02250170-492R00

30
Section 1 - ILLUSTRATION AND PARTS LIST ES-6 SERIES PART LIST MANUAL

1.16 RECEIVER TANK - ENCLOSED WITH DRYER

N
Q
KEY PART O
T DESCRIPTION
NO. NO. T
Y
E

1 02250172-112 1 tank, assembly es6 80 gal

• 02250172-113 1 tank, assembly es6 120 gal
2 047115 1 valve, ball 1/4" npt
3 250006-938 1 valve, pressure relief 200 psig
4 807800-050 1 plug, pipe 1 1/4" 3000# stl
5 860212-075 2 elbow, 37fl 90m 3/4 x 3/4
6 866215-010 1 elbow, pipe 90 deg plt 1/4"
7 866304-010 1 nipple, pipe pltd 1/4 x 1
8 866304-015 1 nipple, pipe pltd 1/4 x 1 1/2
9 868905-030 2 bushing, red hex pltd 1 1/4 x 3/4
A1: From unit
A2: To dryer filter assembly
A3: Tank drain
PLEASE NOTE: WHEN ORDERING PARTS,
INDICATE SERIAL NUMBER OF COMPRESSOR

31
ES-6 SERIES PART LIST MANUAL Section 1 - ILLUSTRATION AND PARTS LIST

1.17 CONTROL BOX - STANDARD

32
Section 1 - ILLUSTRATION AND PARTS LIST ES-6 SERIES PART LIST MANUAL

1.17 CONTROL BOX - STANDARD N

Q
N KEY PART O
Q T DESCRIPTION
KEY PART O NO. NO. T
T DESCRIPTION Y
NO. NO. T E
Y
E
21 250026-469 1 base, compr e6e
1 02250043-291 1 gauge, temperature cap 1/2 npt x 4' 22 250026-639 2 fuse, kldr 0.75 600v td
w/logo
23 250026-740 1 box, junction 7.5/10hp e6e
2 02250045-011 1 pushbutton, reset manual nema 1
24 250030-162 4 screw,1/4-20 x 1/2lg tri rnd
ch
25 250038-867 1 box, ctl assy 60hz e6e
3 02250048-396 1 block, contact chf lrg aux 1 no
26 250039-244 1 support, start box 5;7.5&10hp
4 02250056-423 1 gasket, hourmeter 2.75 o.d. hobbs
27 250041-860 1 support, lower ctl box e6e
5 02250083-182 1 transformer, control 50va univ w/pri
fh 28 250042-224 1 hourmeter, rnd 2-1/2" 120v/60hz
e6e
6 02250125-655 1 valve, solenoid 2wno 1/8 500# n4 (I)
29 807600-005 1 bushing, red stl 1/4 x 1/8
7 02250171-730 1 decal, 3-pos switch pnl es6
30 825304-236 7 nut, hex f pltd 1/4-20
8 02250173-009 1 panel, gauge es6 std with hrmtr
31 829704-050 7 screw, hex ser washer 1/4-20 x 1/2
9 45689 1 plug, hole 1/2"
32 831302-050 4 screw, mach-pan hd #10-24 x 1/2
10 250000-104 1 light, pilot assy green
33 847200-050 3 locknut, conduit 1/2
11 250005-185 1 gauge, pressure 2"
34 847815-050 2 nipple, chase cond 1/2
12 250019-751 1 fuse, limitron ktk-r 0.50
35 848815-050 1 bushing, conduit plastic 1/2
13 250023-229 1 starter, f 3ph 120vc chf open
(I) For maintenance on solenoid valve no. 0250125-655, order
14 250025-299 1 switch pressure 0-200 dpst n1 repair kit no. 02250160-743, and replacement coil no. 0250125-
15 250025-849 3 elbow,90deg m swvl 1/4t x 1/8npt 856.
16 250025-858 1 connector, male 1/4tube x 1/8 PLEASE NOTE: WHEN ORDERING PARTS,
17 250025-863 1 relay, p.c. board e6e INDICATE SERIAL NUMBER OF COMPRESSOR
18 250025-922 1 connector,fem tube 1/4 x 1/8 nptf
19 250026-139 1 tee, male branch brass 1/8"
20 250026-153 1 connector, liq tight plastic 1/2npt

33
ES-6 SERIES PART LIST MANUAL Section 1 - ILLUSTRATION AND PARTS LIST

1.18 CONTROL BOX - WYE-DELTA

34
Section 1 - ILLUSTRATION AND PARTS LIST ES-6 SERIES PART LIST MANUAL

1.18 CONTROL BOX - WYE-DELTA

N
Q
KEY PART O
T DESCRIPTION
NO. NO. T
Y
E

1 - terminal block (I)

2 - fuse (I)
3 - CPT with tamper-proof cover (I)
4 - control relay (I)
5 - contactor (I)
6 - contactor (I)
7 - contactor (I)
8 - pressure switch (I)
9 - contactor (I)
10 - contactor (I)
11 - pressure gauge (I)
12 - selector switch (I)
13 - temperature gauge (I)
14 - hourmeter (I)
15 - power on (I)
16 - reset button (I)
(I) The wye-delta starter is a complete unit. For parts breakdown,
consult factory.
PLEASE NOTE: WHEN ORDERING PARTS,
INDICATE SERIAL NUMBER OF COMPRESSOR

35
ES-6 SERIES PART LIST MANUAL Section 1 - ILLUSTRATION AND PARTS LIST

1.19 CONTROL BOX - WYE-DELTA - DECALS, ETC.

02250174-394R00

36
Section 1 - ILLUSTRATION AND PARTS LIST ES-6 SERIES PART LIST MANUAL

1.19 CONTROL BOX - WYE-DELTA - DECALS, ETC. I

I PART T
A B C D DESCRIPTION
PART T NO. E
A B C D DESCRIPTION
NO. E M
M
1 1 1 1 250026-153 24 conn, liq tight plastic 1/2npt
1 1 1 1 02250122-308 1 str, es6 y/d 5.5/7.5/iohp eu ce 1 1 1 1 823108-015 25 nipple, galv 1/2 x 1 1/2
1 1 1 1 250005-185 2 gauge, press 2"dia 0-230# 1 1 1 1 250032-763 26 switch, press rg 6.5 to 8.5 nc
1 1 1 1 250031-244 3 switch pressure 0-250 dpst n1 2 2 2 2 849602-014 27 terminal, spade
1 1 1 1 02250043-291 4 ga, temp cap 1/2 npt x 4'
PLEASE NOTE: WHEN ORDERING PARTS,
1 1 1 1 02250125-655 5 vlv, sol 2wno 1/8 5001 n4
INDICATE SERIAL NUMBER OF COMPRESSOR
1 1 1 1 250042-010 6 hrmtr, rnd 2-1/2" 120v/50hz
1 1 1 1 02250056-423 7 gskt, hourmeter
1 1 - - 02250055-272 8 decal, danger hi voltage french
LETTER ASSEMBLY DESCRIPTION REV WEIGHT
- - 1 1 42218 8 decal, danger hi voltage english
KEY P/N
1 1 - - 02250055-276 9 sign, warning-comp oil fil cap french
- - 1 1 49685 9 sign, warning-comp oil fil cap english A 02250174-395 start, asy es6 wye- 00 33 lbs
1 1 - - 02250055-275 10 sign, warning ground fault french delta french ce
- - 1 1 49852 10 sign, warning ground fault english B 02250174-396 start, asy es6 wye- 00 35 lbs
1 1 1 1 02250077-472 11 decal, electrocution hazard english delta french
1 1 - - 02250055-278 12 sign, warning-hot surfaces french
C 02250174-397 start, asy es6 wye- 00 33 lbs
- - 1 1 407408 12 sign, warning-hot surfaces english
delta english ce
1 1 1 1 02250075-540 13 decal, pe designation
1 1 1 1 02250075-045 14 decal, protective earth ground D 02250174-398 start, asy es6 wye- 00 35 lbs
delta english
1 1 - - 02250055-274 15 decal, danger electro french
- - 1 1 250019-032 15 decal, danger electro english
1 1 1 1 02250173-144 16 decal, elec encl es6 wye-delta
1 1 1 1 02250173-143 17 decal ,top ga pnl es6 wye-delta
1 1 1 1 02250170-524 18 pnl, ga es6 top mount
1 1 1 1 250025-012 19 plug, hole 3/4"
3 3 3 3 848815-050 20 bushing, conduit plastic 1/2"
6 6 6 6 847200-050 21 locknut, conduit 1/2
1 1 1 1 847815-050 22 nipple, chase cond 1/2
2 2 2 2 834502-050 23 screw, self drillling

37
ES-6 SERIES PART LIST MANUAL Section 1 - ILLUSTRATION AND PARTS LIST

1.20 ENCLOSURE

02250170-250R00

38
Section 1 - ILLUSTRATION AND PARTS LIST ES-6 SERIES PART LIST MANUAL

1.20 ENCLOSURE
N
Q
KEY PART O
T DESCRIPTION
NO. NO. T
Y
E

1 02250150-893 4 cap, molded canopy corner

2 02250152-323 4 insulation, foam 2" corner piece
3 02250152-336 4 gusset, corner p8 p10
4 02250165-862 1ft seal, trim, clip-on
5 02250170-202 4 rail, corner vert es6
6 02250170-203 2 rail, top horiz end es6
7 02250170-204 2 rail, top horiz side es6
8 02250170-205 1 panel, canopy roof es6
9 02250170-206 1 panel, canopy front es6
10 02250170-207 1 panel, canopy rear es6
11 02250170-208 1 panel, canopy end es6
12 02250170-209 1 panel, canopy end es6 air inl
13 02250170-211 1 panel, air baffle es6
14 250034-582 3 retainer, es6 part 5.5-
10hpacac5060
15 883008-016 32 screw, tf-hex m8 x 16 blk zinc
OPTN 1

02250172-109 1 filter, clean air inlet es6

PLEASE NOTE: WHEN ORDERING PARTS,

INDICATE SERIAL NUMBER OF COMPRESSOR

39
ES-6 SERIES PART LIST MANUAL Section 1 - ILLUSTRATION AND PARTS LIST

1.21 DECAL GROUP

40
Section 1 - ILLUSTRATION AND PARTS LIST ES-6 SERIES PART LIST MANUAL

1.21 DECAL GROUP

N
Q
KEY PART O
T DESCRIPTION
NO. NO. T
Y
E

1 250003-144 1 sign, warning "food grade" lube

2 250027-935 1 decal, danger breath air
3 049685 1 sign, warning- comp oil fill cap
4 049852 1 sign, warning ground fault
5 250019-032 1 decal, danger electo - english
6 407408 1 sign, warning- hot surfaces
7 02250077-742 1 decal, electrocution hazard interntl/
glbl
8 042218 1 decal, danger hi voltage
9 02250077-473 1 decal, warning auto start
Continued on page 43
PLEASE NOTE: WHEN ORDERING PARTS,
INDICATE SERIAL NUMBER OF COMPRESSOR

41
ES-6 SERIES PART LIST MANUAL Section 1 - ILLUSTRATION AND PARTS LIST

1.21 DECAL GROUP (CONTINUED)

42
Section 1 - ILLUSTRATION AND PARTS LIST ES-6 SERIES PART LIST MANUAL

1.21 DECAL GROUP (CONTINUED)

N
Q
KEY PART O
T DESCRIPTION
NO. NO. T
Y
E

10 02250059-288 1 decal, ISO 9001

11 040745 1 decal, rotation direction
12 02250069-397 1 decal, voltage international (I)
13 02250172-117 1 decal, s-energy blk ES-6
14 02250075-045 1 decal, protective earth ground
15 02250075-540 1 decal, PE designation
16 02250060-043 1 decal, es-6 black 7.25 x 2.375
• 02250060-045 1 decal, es-6 black 2.65 x .750
17 02250172-118 1 decal, sullair 16.5" blk
• 02250059-046 1 decal, "sullair" .75 x 6
• 02250173-083 1 decal, sullair 9" blk
18 02250069-389 1 decal, compressor fluid sullube (II)
19 02250173-005 2 decal, forklift arrow rh 3x1.5
20 02250173-006 2 decal, forklift arrow lh 3x1.5
21 02250173-007 1 decal, no forklift 1.8 x 1.5
22 02250171-730 1 decal, 3-pos switch panel ES6 (III)
(I) Decal varies by voltage type. Consult factory with machine
serial number.
(II) Decal varies by fluid. Consult factory with machine serial num-
ber.
(III) Not shown.
PLEASE NOTE: WHEN ORDERING PARTS,
INDICATE SERIAL NUMBER OF COMPRESSOR

43
ES-6 SERIES PART LIST MANUAL Section 1 - ILLUSTRATION AND PARTS LIST

1.22 DECAL LOCATIONS - ES-6 OPEN STANDARD

02250173-476R00

44
Section 1 - ILLUSTRATION AND PARTS LIST ES-6 SERIES PART LIST MANUAL

1.22 DECAL LOCATIONS - ES-6 OPEN STANDARD

N
Q
KEY PART O
T DESCRIPTION
NO. NO. T
Y
E

1 02250059-046 1 decal, "sullair" .75 x 6

2 02250060-045 1 decal, es-6 black 2.65 x .750
3 02250069-389 1 decal, fluid sullube (I)
4 02250069-397 1 decal, volt 230/3/60 international (II)
5 02250075-045 1 decal, protective earth ground
6 02250075-540 1 decal, pe designation
7 02250077-472 1 decal, electrocution hazard interna-
tional/global
8 042218 1 decal, danger hi voltage
9 049685 1 sign, warning-comp oil fil cap
10 049852 1 decal, warning elect. shock-ground
fault
11 250003-144 1 sign, warn "food grade" lube
12 250019-032 1 decal, danger electro-english
13 250021-564 1 decal, rotation
14 250027-935 1 decal, danger breath air
15 407408 1 sign, warning-hot surfaces
(I) Decal varies by fluid type. Consult factory with machine serial
number.
(II) Decal varies by voltage. Consult factory with machine serial
number.
PLEASE NOTE: WHEN ORDERING PARTS,
INDICATE SERIAL NUMBER OF COMPRESSOR

45
ES-6 SERIES PART LIST MANUAL Section 1 - ILLUSTRATION AND PARTS LIST

1.23 DECAL LOCATIONS - ES-6 ENCLOSED STANDARD

02250170-488R00

46
Section 1 - ILLUSTRATION AND PARTS LIST ES-6 SERIES PART LIST MANUAL

1.23 DECAL LOCATIONS - ES-6 ENCLOSED STANDARD

N
Q
KEY PART O
T DESCRIPTION
NO. NO. T
Y
E

1 02250059-288 1 decal, ISO 9001blk 2.75x4.60

2 02250060-043 1 decal, es-6 black 7.25 x 2.375
3 02250155-495 1 decal, black www.sullair.com
4 02250172-117 1 decal, s-energy black es6
5 02250172-118 1 decal, sullair 16.5" blk
6 02250173-005 2 decal, forklift arrow rh 3x1.5
7 02250173-006 2 decal, forklift arrow lh 3x1.5
8 02250173-007 2 decal, no forklift 1.8 x 1.5
PLEASE NOTE: WHEN ORDERING PARTS,
INDICATE SERIAL NUMBER OF COMPRESSOR

47
ES-6 SERIES PART LIST MANUAL Section 1 - ILLUSTRATION AND PARTS LIST

1.24 DECAL LOCATIONS - ES-6 ENCLOSED TANK-MOUNTED

02250172-806R00

48
Section 1 - ILLUSTRATION AND PARTS LIST ES-6 SERIES PART LIST MANUAL

1.24 DECAL LOCATIONS - ES-6 OPEN TANK-MOUNTED

N
Q
KEY PART O
T DESCRIPTION
NO. NO. T
Y
E

1 02250059-288 1 decal, ISO 9001blk 2.75x4.60

2 02250060-043 1 decal, es-6 black 7.25 x 2.375
3 02250155-495 1 decal, black www.sullair.com
4 02250172-117 1 decal, s-energy black es6
5 02250172-118 1 decal, sullair 16.5" blk
6 02250173-005 2 decal, forklift arrow rh 3x1.5
7 02250173-006 2 decal, forklift arrow lh 3x1.5
8 02250173-007 1 decal, no forklift 1.8 x 1.5
9 02250173-083 1 decal, sullair 9" blk
PLEASE NOTE: WHEN ORDERING PARTS,
INDICATE SERIAL NUMBER OF COMPRESSOR

49
ES-6 SERIES PART LIST MANUAL Section 1 - ILLUSTRATION AND PARTS LIST

1.25 DECAL LOCATIONS - ES-6 OPEN TANK-MOUNTED

02250172-805R00

50
Section 1 - ILLUSTRATION AND PARTS LIST ES-6 SERIES PART LIST MANUAL

1.25 DECAL LOCATIONS - ES-6 OPEN TANK-MOUNTED

N
Q
KEY PART O
T DESCRIPTION
NO. NO. T
Y
E

1 02250173-005 2 decal, forklift arrow rh 3x1.5

2 02250173-006 2 decal, forklift arrow lh 3x1.5
3 02250173-007 1 decal, no forklift 1.8 x 1.5
4 02250173-083 1 decal, sullair 9" blk
PLEASE NOTE: WHEN ORDERING PARTS,
INDICATE SERIAL NUMBER OF COMPRESSOR

51
ES-6 SERIES PART LIST MANUAL Section 1 - ILLUSTRATION AND PARTS LIST

1.26 DRYER OPTION - SCF40/SRS25 (SRS-9)

02250172-869R00

52
Section 1 - ILLUSTRATION AND PARTS LIST ES-6 SERIES PART LIST MANUAL

1.26 DRYER OPTION - SCF40/SRS25 (SRS-9) N

Q
N KEY PART O
Q T DESCRIPTION
KEY PART O NO. NO. T
T DESCRIPTION Y
NO. NO. T E
Y
E
23 882508-125 4 nut, serr flng m8 x 1.25
1 02250153-027 1 scf-40n 1/2"npt w/auto drains (I) 24 882606-016 4 screw, hex serr washer m6 x 16
2 02250154-585 1 kit, sc mounting bracket 40-65 25 882608-020 2 screw, hex serr washer m8 x 20
3 02250169-523 1 dryer, srs-25 ac 1/60/115 26 883006-012 6 screw, tf-hex m6 x 12 blk zinc
• 02250169-507 1 dryer, srs-9 ac 1/50/230 A1: From receiver tank
4 02250170-233 1 platform, dryr/fltr mnt es6 (I) For maintenance on scf-40n pre-filter, order replacement ele-
5 02250170-514 1 tube, bypass tee/vlv es6 3/4" ment no. 02250153-289.

6 02250170-522 1 tube, bypass vlv/tee es6 3/4" (II) For hose maintenance, order hose kit no. 02250172-758.

7 02250170-622 1 support, customer conn es6 tm PLEASE NOTE: WHEN ORDERING PARTS,
INDICATE SERIAL NUMBER OF COMPRESSOR
8 02250171-078 1 hose, 3/4 dryer in es6 srs35 (II)
9 02250171-079 1 hose, 3/4 dryer out es6 srs35 (II)
10 02250171-080 2 hose, 3/4 tank/fltr es6 (II)
11 02250172-679 2 wrap, spiral hose 1" id blk
12 047117 1 valve, ball 1/2"npt
13 047118 2 valve, ball 3/4" service
14 810212-075 4 connector, tube-m 3/4 x 3/4
15 825906-100 4 nut, serr flng m6 x 1
16 841500-012 1 bulkhead, pipe 3/4" npt
17 860112-050 3 connector, 37 fl/mpt pltd 3/4 x 1/2
18 860112-075 2 connector, 37 fl/mpt pltd 3/4 x 3/4
19 866408-000 2 nipple, pipe-xs plt 1/2 x cl
20 866412-000 2 nipple,pipe-xs plt 3/4 x cl
21 866815-030 1 tee, pi pe 150# plt 3/4
22 867503-032 1 tee, reducing pltd 3/4 x 3/4 x 1/2

53
ES-6 SERIES PART LIST MANUAL Section 1 - ILLUSTRATION AND PARTS LIST

1.27 DRYER OPTION - SCF40/SRS35 (SRS-12)

02250170-487R00

54
Section 1 - ILLUSTRATION AND PARTS LIST ES-6 SERIES PART LIST MANUAL

1.27 DRYER OPTION - SCF40/SRS35 (SRS-12) N

Q
N KEY PART O
Q T DESCRIPTION
KEY PART O NO. NO. T
T DESCRIPTION Y
NO. NO. T E
Y
E
23 882508-125 4 nut, serr flng m8 x 1.25
1 02250153-027 1 scf-40n 1/2"npt w/auto drains (I) 24 882606-016 4 screw, hex serr washer m6 x 16
2 02250154-585 1 kit, sc mounting bracket 40-65 25 882608-020 2 screw, hex serr washer m8 x 20
3 02250169-524 1 dryer, srs-35 ac 1/60/115 26 883006-012 6 screw, tf-hex m6 x 12 blk zinc
• 02250169-513 1 dryer, srs-12 ac 1/50/230 A1: From receiver tank
4 02250170-233 1 platform, dryr/fltr mnt es6 (I) For maintenance on scf-40n pre-filter, order replacement ele-
5 02250170-514 1 tube, bypass tee/vlv es6 3/4" ment no. 02250153-289.

6 02250170-522 1 tube, bypass vlv/tee es6 3/4" (II) For hose maintenance, order hose kit no. 02250172-758.

7 02250170-622 1 support, customer conn es6 tm PLEASE NOTE: WHEN ORDERING PARTS,
INDICATE SERIAL NUMBER OF COMPRESSOR
8 02250171-078 1 hose, 3/4 dryer in es6 srs35 (II)
9 02250171-079 1 hose, 3/4 dryer out es6 srs35 (II)
10 02250171-080 2 hose, 3/4 tank/fltr es6 (II)
11 02250172-679 2 wrap, spiral hose 1" id blk
12 047117 1 valve, ball 1/2"npt
13 047118 2 valve, ball 3/4" service
14 810212-075 4 connector, tube-m 3/4 x 3/4
15 825906-100 4 nut, serr flng m6 x 1
16 841500-012 1 bulkhead, pipe 3/4" npt
17 860112-050 3 connector, 37 fl/mpt pltd 3/4 x 1/2
18 860112-075 2 connector, 37 fl/mpt pltd 3/4 x 3/4
19 866408-000 2 nipple, pipe-xs plt 1/2 x cl
20 866412-000 2 nipple, pipe-xs plt 3/4 x cl
21 866815-030 1 tee, pipe 150# plt 3/4
22 867503-032 1 tee, reducing pltd 3/4 x 3/4 x 1/2

55
ES-6 SERIES PART LIST MANUAL Section 1 - ILLUSTRATION AND PARTS LIST

1.28 DRYER OPTION - SCF65/SRS50 (SRS-18)

02250170-486R00

56
Section 1 - ILLUSTRATION AND PARTS LIST ES-6 SERIES PART LIST MANUAL

1.28 DRYER OPTION - SCF65/SRS50 (SRS-18) N

Q
N KEY PART O
Q T DESCRIPTION
KEY PART O NO. NO. T
T DESCRIPTION Y
NO. NO. T E
Y
E
A1: Included with dryer
1 02250153-029 1 scf-65n 3/4"npt w/auto drains (I) A2: From receiver tank
2 02250154-585 1 kit, sc mounting bracket 40-65 (I) For maintenance on scf-65n pre-filter, order replacement ele-
3 02250169-525 1 dryer, srs-50 ac 1/60/115 ment no. 02250153-290.

• 02250169-514 1 dryer, srs-18 ac 1/50/230 (II) For hose maintenance, order hose kit no. 02250172-759.

4 02250170-233 1 platform, dryr/fltr mnt es6 PLEASE NOTE: WHEN ORDERING PARTS,
INDICATE SERIAL NUMBER OF COMPRESSOR
5 02250170-514 1 tube, bypass tee/vlv es6 3/4"
6 02250170-522 1 tube, bypass vlv/tee es6 3/4"
7 02250170-622 1 support, customer conn es6 tm
8 02250171-080 1 hose, 3/4 tank/fltr es6 (II)
9 02250172-581 1 hose, 3/4 dryer in es6 srs50/75 (II)
10 02250172-582 1 hose, 3/4 dryer out es6 srs50/75 (II)
11 02250172-679 2 wrap, spiral hose 1" id blk
12 047118 3 valve, ball 3/4" service
13 810212-075 4 connector, tube-m 3/4 x 3/4
14 825906-100 4 nut, serr flng m6 x 1
15 841500-012 1 bulkhead, pipe 3/4" npt
16 860112-075 5 connector,37 fl/mpt pltd 3/4 x 3/4
17 866412-000 4 nipple, pipe-xs plt 3/4 x cl
18 866815-030 2 tee, pipe 150# plt 3/4
19 882508-125 4 nut, serr flng m8 x 1.25
20 882606-016 4 screw, hex serr washer m6 x 16
21 882608-020 2 screw, hex serr washer m8 x 20
22 883006-012 6 screw, tf-hex m6 x 12 blk zinc

57
ES-6 SERIES PART LIST MANUAL Section 1 - ILLUSTRATION AND PARTS LIST

1.29 DRYER OPTION - SCF125/SRS75 (SRS-24)

02250170-489R00

58
Section 1 - ILLUSTRATION AND PARTS LIST ES-6 SERIES PART LIST MANUAL

1.29 DRYER OPTION - SCF125/SRS75 (SRS-24) N

Q
N KEY PART O
Q T DESCRIPTION
KEY PART O NO. NO. T
T DESCRIPTION Y
NO. NO. T E
Y
E
A1: Included with dryer
1 02250153-031 1 scf-125n 3/4"npt w/auto drains (I) A2: From receiver tank
2 02250154-586 1 kit, sc mounting bracket 125-235 (I) For maintenance on scf-125n pre-filter, order replacement ele-
3 02250169-526 1 dryer, srs-75 ac 1/60/115 ment no. 02250153-291.

• 02250169-515 1 dryer, srs-24 ac 1/50/230 (II) For hose maintenance, order hose kit no. 02250172-759.

4 02250170-233 1 platform, dryr/fltr mnt es6 PLEASE NOTE: WHEN ORDERING PARTS,
INDICATE SERIAL NUMBER OF COMPRESSOR
5 02250170-514 1 tube, bypass tee/vlv es6 3/4"
6 02250170-522 1 tube, bypass vlv/tee es6 3/4"
7 02250170-622 1 support, customer conn es6 tm
8 02250171-080 2 hose, 3/4 tank/fltr es6 (II)
9 02250172-581 1 hose, 3/4 dryer in es6 srs50/75 (II)
10 02250172-582 1 hose, 3/4 dryer out es6 srs50/75 (II)
11 02250172-679 2 wrap, spiral hose 1" id blk
12 047118 3 valve, ball 3/4" service
13 810212-075 4 connector, tube-m 3/4 x 3/4
14 825906-100 4 nut, serr flng m6 x 1
15 841500-012 1 bulkhead, pipe 3/4" npt
16 860112-075 5 connector, 37 fl/mpt pltd 3/4 x 3/4
17 866412-000 4 nipple, pipe-xs plt 3/4 x cl
18 866815-030 2 tee, pipe 150# plt 3/4
19 882508-125 4 nut, serr flng m8 x 1.25
20 882606-016 4 screw, hex serr washer m6 x 16
21 882608-020 2 screw, hex serr washer m8 x 20
22 883006-012 6 screw, tf-hex m6 x 12 blk zinc

59
 WORLDWIDE SALES AND SERVICE
SULLAIR ASIA, LTD. SULLAIR CORPORATION SULLAIR EUROPE, S.A.
Sullair Road, No. 1 Zone Des Granges BP 82
Chiwan, Shekuo 3700 East Michigan Boulevard
Michigan City, Indiana 46360 U.S.A 42602 Montbrison, France
Shenzhen, Guangdong PRV. Telephone: 33-477968470
PRC POST CODE 518068 www.sullair.com
Telephone: 1-800-SULLAIR (U.S.A. only) Fax: 33-477968499
Telephone: 755-6851686 www.sullaireurope.com
Fax: 755-6853473 Fax: 219-874-1273
www.sullair-asia.com
CUSTOMER CARE
for PARTS and Service
1-888-SULLAIR (7855247)
219-874-1835

Champion Compressors, LTD.

Princess Highway
Hallam, Victoria 3803
Austrailia
Telephone: 61-3-9796-4000
Fax: 61-3-9703-8053
www. championcompressors.com.au

Printed in the U.S.A.

Specifications subject to
change without prior notice.
E07EP