Smart Energy Center

2x

Active Safety Higher Yields 2x POWER Battery Ready

AI Powered Up to 30% More 5KW AC Output plus
Active Arcing Protection Energy with Optimizer 5KW Battery Charge

Efficiency Curve Circuit Diagram

100%
DC Input
Switch EMI Filter
98%
+
96% PV1 DC/AC Output Output
- Converter Isolation Relay EMI Filter
94% +
PV2 L
92% - N
- PE
90% Battery
+
DC SPD

88% AC SPD
5% 10% 20% 30% 50% 75% 100%

260V 360V 480V

Load [%] SUN2000-2/3/3.68/4/4.6/5/6KTL-L1

SOLAR.HUAWEI.COM/EU/
 SUN2000-2/3/3.68/4/4.6/5/6KTL-L1
Technical Specification
SUN2000 SUN2000 SUN2000 SUN2000 SUN2000 SUN2000 SUN2000
Technical Specification -2KTL-L1 -3KTL-L1 -3.68KTL-L1 -4KTL-L1 -4.6KTL-L1 -5KTL-L1 -6KTL-L11

Efficiency
Max. efficiency 98.2 % 98.3 % 98.4 % 98.4 % 98.4 % 98.4 % 98.4 %
European weighted efficiency 96.7 % 97.3 % 97.3 % 97.5 % 97.7 % 97.8 % 97.8 %

Input （PV）
Recommended max. PV power 2 3,000 Wp 4,500 Wp 5,520 Wp 6,000 Wp 6,900 Wp 7,500 Wp 9,000 Wp
Max. input voltage 600 V 3
Start-up voltage 100 V
MPPT operating voltage range 90 V – 560 V 3
Rated input voltage 360 V
Max. input current per MPPT 12.5 A
Max. short-circuit current 18 A
Number of MPP trackers 2
Max. number of inputs 2

Input （DC Battery）

Compatible Battery LG Chem RESU 7H_R / 10H_R
Operating voltage range 350 ~ 450 Vdc
Max operating current 10 A @7H_R / 15 A @10H_R
Max charge power 3,500 W @7H_R / 5,000 W @10H_R
Max discharge Power @7H_R 2,200 W 3,300 W 3,500 W 3,500 W 3,500 W 3,500 W 3,500 W
Max discharge Power @10H_R 2,200 W 3,300 W 3,680 W 4,400 W 4,600 W 5,000 W 5,000 W

Compatible Battery HUAWEI PowerMate ESS Battery 5kWh – 30kWh 1

Operating voltage range 350 ~ 560 Vdc

Max operating current 15 A
Max charge / discharge Power 5,000 W 4

Output
Grid connection Single phase
Rated output power 2,000 W 3,000 W 3,680 W 4,000 W 4,600 W 5,000 W 5 6,000 W
Max. apparent power 2,200 VA 3,300 VA 3,680 VA 4,400 VA 5,000 VA 6 5,500 VA 7 6,000 VA
Rated output voltage 220 V / 230 V / 240 V
Rated AC grid frequency 50 Hz / 60 Hz
Max. output current 10 A 15 A 16 A 20 A 23 A 8 25 A 8 27 A
Adjustable power factor 0.8 leading ... 0.8 lagging
Max. total harmonic distortion ≤3%
Backup power output Yes (via Backup Box-5000 1)

Protection & Feature

Anti-Islanding protection Yes
DC reverse polarity protection Yes
Insulation monitoring Yes
DC surge protection Yes, compatible with TYPE II protection class according to EN/IEC 61643-11
AC surge protection Yes, compatible with TYPE II protection class according to EN/IEC 61643-11
Residual current monitoring Yes
AC overcurrent protection Yes
AC short-circuit protection Yes
AC overvoltage protection Yes
Over-heat protection Yes
Arc fault protection Yes
Battery reverse charging from grid Yes

General Data
Operating temperature range -25 ~ +60 °C (Derating above 45°C @ Rated output power)
Relative operating humidity 0 %RH～100 %RH
Operating altitude 0 ～ 4,000 m (Derating above 2,000 m)
Cooling Natural convection
Display LED indicators; integrated WLAN + FusionSolar APP
RS485, WLAN via inverter built-in WLAN module
Communication
Ethernet via Smart Dongle-WLAN-FE (Optional); 4G / 3G / 2G via Smart Dongle-4G (Optional)
Weight (incl. mounting bracket) 12.3 kg (27.1 lb)
Dimension (incl. mounting bracket) 365mm * 365mm * 140 mm (14.4 x 14.4 x 5.5 inch)
Degree of protection IP65

Optimizer Compatibility
DC MBUS compatible optimizer SUN2000-450W-P

Standard Compliance (more available upon request)

Safety EN/IEC 62109-1, EN/IEC 62109-2
G98, G99, EN 50549-1, CEI 0-21, VDE-AR-N-4105, AS 4777, C10/11, ABNT, UTE C15-712, RD 1699, TOR D4, IEC61727,
Grid connection standards
IEC62116
*1 Available in 2020 Q3.
*2 Inverter max input PV power is 10,000 Wp when long strings are designed and fully connected with SUN2000-450W-P power optimizers.
*3 The maximum input voltage and operating voltage upper limit will be reduced to 495 V when inverter connects and works with LG battery.
*4 2,500 W @ 5kWh HUAWEI ESS battery
*5 AS4777: 4990W. *6. VDE-AR-N 4105: 4600VA / AS4777: 4990VA. *7. AS4777: 4990VA. *8. AS4777: 21.7A.
Version No.:03-(20200409) SOLAR.HUAWEI.COM/EU/
 Smart Energy Controller

Active Safety Higher Yields Battery Ready Flexible Communication

AI Powered Up to 30% More Energy Plug & Play battery interface 2 WLAN, Fast Ethernet, 4G
Active Arcing Protection with Optimizer 1 Communication Supported

Efficiency Curve Circuit Diagram

Efficiency [%]
DC
100% Switch

PV1+
98%
DC/AC Output
PV1- EMI Converter Isolation Relay
Filter
96% PV2-
L1
PV2+
94% Output EMI L2
Filter Filter
L3
92% SPD
N
BAT+ PE
BAT-
90%
SPD
0% 20% 40% 60% 80% 100%
470 V 600 V 850 V
Load [%] SUN2000-3/4/5/6/8/10KTL-M0/M1

*1 Only applicable to SUN2000-3/4/5/6/8/10KTL-M1 smart energy center.

*2. SUN2000-3/4/5/6/8/10KTL-M0 will be compatible with HUAWEI smart string ESS in Q1, 2021

SOLAR.HUAWEI.COM/EU/
 SUN2000-3/4/5/6/8/10KTL-M1
Technical Specification
SUN2000 SUN2000 SUN2000 SUN2000 SUN2000 SUN2000
Technical Specification -3KTL-M1 -4KTL-M1 -5KTL-M1 -6KTL-M1 -8KTL-M1 -10KTL-M1

Efficiency
Max. efficiency 98.2% 98.3% 98.4% 98.6% 98.6% 98.6%
European weighted efficiency 96.7% 97.1% 97.5% 97.7% 98.0% 98.1%

Input (PV)
Recommended max. PV power 1 4,500 Wp 6,000 Wp 7,500 Wp 9,000 Wp 12,000 Wp 15,000 Wp
Max. input voltage 2 1,100 V
Operating voltage range 3 140 V ~ 980 V
Start-up voltage 200 V
Rated input voltage 600 V
Max. input current per MPPT 11 A
Max. short-circuit current 15 A
Number of MPP trackers 2
Max. input number per MPP tracker 1

Input (DC Battery)

Compatible Battery HUAWEI Smart String ESS 5kWh – 30kWh
Operating voltage range 600 V ~ 980 V
Max operating current 16.7 A
Max charge Power 10,000 W
Max discharge Power 3,300 W 4,400 W 5,500 W 6,600 W 8,800 W 10,000 W

Output (On Grid)

Grid connection Three-phase
Rated output power 3,000 W 4,000 W 5,000 W 6,000 W 8,000 W 10,000 W
Max. apparent power 3,300 VA 4,400 VA 5,500 VA 6,600 VA 8,800 VA 11,000 VA 4
Rated output voltage 220 Vac / 380 Vac, 230 Vac / 400 Vac, 3W / N+PE
Rated AC grid frequency 50 Hz / 60 Hz
Max. output current 5.1 A 6.8 A 8.5 A 10.1 A 13.5 A 16.9 A
Adjustable power factor 0.8 leading ... 0.8 lagging
Max. total harmonic distortion ≤3%

Output (Off Grid)

Backup Box Backup Box – B1
Maximum apparent power 3,000 VA 3,300 VA 3,300 VA 3,300 VA 3,300 VA 3,300 VA
Rated output voltage 220 V / 230 V
Maximum output current 13.6 A 15 A 15 A 15 A 15 A 15 A
Power factor range 0.8 leading ... 0.8 lagging

Features & Protections

Input-side disconnection device Yes
Anti-Islanding protection Yes
DC reverse polarity protection Yes
Insulation monitoring Yes
DC surge protection Yes, compatible with TYPE II protection class according to EN/IEC 61643-11
AC surge protection Yes, compatible with TYPE II protection class according to EN/IEC 61643-11
Residual current monitoring Yes
AC overcurrent protection Yes
AC short-circuit protection Yes
AC overvoltage protection Yes
Arc fault protection Yes
Ripple receiver control Yes
Integrated PID recovery 5 Yes
Battery reverse charging from grid Yes

General Data
Operating temperature range -25 ~ + 60 °C (-13 °F ~ 140 °F)
Relative operating humidity 0 %RH～100 %RH
Max. operating altitude 4,000 m (13,123 ft.) (Derating above 2000 m)
Cooling Natural convection
Display LED Indicators; Integrated WLAN + FusionSolar App
Communication RS485; WLAN/Ethernet via Smart Dongle-WLAN-FE; 4G / 3G / 2G via Smart Dongle-4G (Optional)
Weight (incl. mounting bracket) 17 kg (37.5 lb)
Dimension (incl. mounting bracket) 525 x 470 x 146.5 mm (20.7 x 18.5 x 5.8 inch)
Degree of protection IP65
Nighttime Power Consumption < 5.5 W 6

Optimizer Compatibility
DC MBUS compatible optimizer SUN2000-450W-P

Standard Compliance (more available upon request)

Certificate EN/IEC 62109-1, EN/IEC 62109-2, IEC 62116
G98, G99, EN 50438, CEI 0-21, VDE-AR-N-4105, AS 4777, C10/11, ABNT, UTE C15-712, RD 1699, TOR D4, NRS 097-2-1,
Grid connection standards
IEC61727, IEC62116, DEWA
*1 Inverter max input PV power is 20,000 Wp when long strings are designed and fully connected with SUN2000-450W-P power optimizers.
*2 The maximum input voltage is the upper limit of the DC voltage. Any higher input DC voltage would probably damage inverter.
*3 Any DC input voltage beyond the operating voltage range may result in inverter improper operating. *4 C10 / 11: 10,000 VA
*5 SUN2000-3~10KTL-M1 raises potential between PV- and ground to above zero through integrated PID recovery function to recover module degradation from PID. Supported module types include: P-type (mono, poly).
*6. <10 W when PID recovery function is activated.
Version No.:04-(20201006) SOLAR.HUAWEI.COM/EU/
Smart PV Controller

Active Safety Higher Yields Flexible Communication

AI Powered Arcing Protection Up to 30% More Energy with Optimizer 1 WLAN, Fast Ethernet, 4G
Communication Supported

Efficiency Curve Circuit Diagram

Efficiency [%]
DC
99% Switch

PV1+
98% PV1- PVA
PV2+
DC/AC Output
97% PV2-
PVAB- EMI Converter Isolation Relay
Filter
PV3+
96% PVB
L1
PV3-

PV4+ Output EMI L2

95% Filter Filter
PV4-
L3
SPD
94% N
PE

93% SPD
0.00% 20.00% 40.00% 60.00% 80.00% 100.00%
480V 600V 850V

Load [%] SUN2000-12/15/17/20KTL-M0/M2

*1 Only applicable to SUN2000-12/15/17/20KTL-M2 inverter.

SOLAR.HUAWEI.COM/EU/
 SUN2000-12/15/17/20KTL-M2
Technical Specification

SUN2000 SUN2000 SUN2000 SUN2000

Technical Specification -12KTL-M2 -15KTL-M2 -17KTL-M2 -20KTL-M2

Efficiency
Max. efficiency 98.50% 98.65% 98.65% 98.65%
European weighted efficiency 98.00% 98.30% 98.30% 98.30%

Input
Recommended max. PV power 1 18,000 Wp 22,500 Wp 25,500 Wp 30,000 Wp
Max. input voltage 2 1,080 V
Operating voltage range 3 160 V ~ 950 V
Start-up voltage 200 V
Rated input voltage 600 V
Max. input current per MPPT 22 A
Max. short-circuit current 30 A
Number of MPP trackers 2
Max. input number per MPP tracker 2

Output
Grid connection Three phase
Rated output power 12,000 W 15,000 W 17,000 W 20,000 W
Max. apparent power 13,200 VA 16,500 VA 18,700 VA 22,000 VA
Rated output voltage 220 Vac / 380 Vac, 230 Vac / 400 Vac, 3W + N + PE
Rated AC grid frequency 50 Hz / 60 Hz
Max. output current 20 A 25.2 A 28.5 A 33.5 A
Adjustable power factor 0.8 leading ... 0.8 lagging
Max. total harmonic distortion ≤3%

Features & Protections

Input-side disconnection device Yes
Anti-islanding protection Yes
AC over-current protection Yes
AC short-circuit protection Yes
AC over-voltage protection Yes
DC reverse-polarity protection Yes
DC surge protection TYPE II
AC surge protection Yes, compatible with TYPE II protection class according to EN/IEC 61643-11
Residual current monitoring unit Yes
Arc fault protection Yes
Ripple receiver control Yes
Integrated PID recovery 4 Yes

General Data
Operation temperature range -25 ~ +60 °C (-13 °F ~ 140 °F)
Relative humidity 0 % RH ~ 100% RH
Max. operating altitude 0 ～ 4,000 m (13,123 ft.) (Derating above 2000 m)
Cooling Natural Convection
Display LED Indicators; Integrated WLAN + FusionSolar App
RS485; WLAN/Ethernet via Smart Dongle-WLAN-FE (Optional)
Communication
4G / 3G / 2G via Smart Dongle-4G (Optional)
Weight (with mounting plate) 25 kg
Dimensions (W x H x D)
525 x 470 x 262 mm (20.7 x 18.5 x 10.3 inch)
(incl. mounting plate)
Degree of protection IP65
Nighttime Power Consumption < 5.5 W 5

Optimizer Compatibility
DC MBUS compatible optimizer SUN2000-450W-P

Standard Compliance (more available upon request)

Safety EN/IEC 62109-1, EN/IEC 62109-2
G98, G99, EN 50549, CEI 0-21, CEI 0-16, VDE-AR-N-4105, VDE-AR-N-4110, AS 4777.2, C10/11, ABNT,
Grid connection standards
VFR 2019, RD 1699, RD 661, PO 12.3, TOR D4, IEC61727, IEC62116, DEWA
*1 Inverter max input PV power is 40,000 Wp when long strings are designed and fully connected with SUN2000-450W-P power optimizers.
*2 The maximum input voltage is the upper limit of the DC voltage. Any higher input DC voltage would probably damage inverter.
*3 Any DC input voltage beyond the operating voltage range may result in inverter improper operating.
*4 SUN2000-12~20KTL-M2 raises potential between PV- and ground to above zero through integrated PID recovery function to recover module degradation from PID. Supported module types include: P-type (mono, poly)
*5. <10 W when PID recovery function is activated.

Version No.:04-(20201006) SOLAR.HUAWEI.COM/EU/

SUN2000-30/36/40KTL-M3
Smart PV Controller

Smart Efficient Safe Reliable

8 strings intelligent monitoring Max. efficiency 98.7% Fuse free design Type II surge arresters for DC & AC

Efficiency Curve Circuit Diagram

99.00%

98.00%

97.00% 600V

540V
96.00%
800V
95.00%
0.00% 20.00% 40.00% 60.00% 80.00% 100.00%
SUN2000-30/36/40KTL-M3

SO L AR.H UAWE I . CO M
 SUN2000-30/36/40KTL-M3
Technical Specification

Technical Specification SUN2000-30KTL-M3 SUN2000-36KTL-M3 SUN2000-40KTL-M3

Efficiency
Max. Efficiency 98.7%
European Efficiency 98.4%

Input
Max. Input Voltage 1 1,100 V
Max. Current per MPPT 26 A
Max. Short Circuit Current per MPPT 40 A
Start Voltage 200 V
MPPT Operating Voltage Range 2 200 V ~ 1000 V
Rated Input Voltage 600 V
Number of Inputs 8
Number of MPP Trackers 4

Output
Rated AC Active Power 30,000 W 36,000 W 40,000 W
Max. AC Apparent Power 33,000 VA 3 40,000 VA 44,000 VA
Rated Output Voltage 230 Vac / 400 Vac / 480 Vac, 3W/N+PE
Rated AC Grid Frequency 50 Hz / 60 Hz
Rated Output Current 43.3 A 52.0 A 57.8 A
Max. Output Current 47.9 A 58.0 A 63.8 A
Adjustable Power Factor Range 0.8 LG ... 0.8 LD
Max. Total Harmonic Distortion < 3%

Protection
Input-side Disconnection Device Yes
Anti-islanding Protection Yes
AC Overcurrent Protection Yes
DC Reverse-polarity Protection Yes
PV-array String Fault Monitoring Yes
DC Surge Arrester Yes
AC Surge Arrester Yes
DC Insulation Resistance Detection Yes
Residual Current Monitoring Unit Yes
Arc Fault Protection Yes
Ripple Receiver Control Yes
Integrated PID Recovery 4 Yes

Communication
Display LED Indicators, Integrated WLAN + FusionSolar APP
RS485 Yes
WLAN/Ethernet via Smart Dongle-WLAN-FE (Optional)
Smart Dongle
4G / 3G / 2G via Smart Dongle-4G (Optional)
Monitoring BUS (MBUS) Yes (Isolation Transformer required)

General Data
Dimensions (W x H x D) 640 x 530 x 270 mm (25.2 x 20.9 x 10.6 inch)
Weight (with mounting plate) 43 kg (94.8 lb)
Operating Temperature Range -25 ~ + 60 °C (-13 °F ~ 140 °F)
Cooling Method Natural Convection
Max. Operating Altitude 0 - 4,000 m (13,123 ft.)
Relative Humidity 0% RH ~ 100% RH
DC Connector Staubli MC4
AC Connector Waterproof Connector + OT/DT Terminal
Protection Degree IP 66
Topology Transformerless
Nightime Power Consumption ≤ 5.5W

Optimizer Compatibility
DC MBUS Compatible Optimizer SUN2000-450W-P

Standard Compliance (more available upon request)

Safety EN 62109-1/-2, IEC 62109-1/-2, EN 50530, IEC 62116, IEC 60068, IEC 61683
IEC 61727, VDE-AR-N4105, VDE 0126-1-1, BDEW, G59/3, UTE C 15-712-1, CEI 0-16, CEI 0-21, RD 661, RD 1699,
Grid Connection Standards P.O. 12.3,RD 413, EN-50438-Turkey, EN-50438-Ireland, C10/11, MEA, Resolution No.7,
NRS 097-2-1, AS/NZS 4777.2, DEWA

1. The maximum input voltage is the upper limit of the DC voltage. Any higher input DC voltage would probably damage inverter.
2. Any DC input voltage beyond the operating voltage range may result in inverter improper operating.
3. For Austria, German, Belgium & Ukraine the Max. AC Apparent Power will not exceed 30,000 VA (with regard to grid code: VDE-AR-N-4105, C10/11 & Austria)
4. SUN2000-30~40KTL-M3 raises potential between PV- and ground to above zero through integrated PID recovery function to recover module degradation from PID. Supported module types include: P-type (mono, poly),
N-type (nPERT, HIT)

SO L AR.H UAWE I . CO M