Industrial 3054
Diesel 69-122 bhp/52-91 bkW
Engine 2200-2400 rpm
1996 EPA and CARB Non-Road
Emissions Certified
CATERPILLAR® ENGINE SPECIFICATIONS
In-Line 4 Cylinder, Four-Stroke-Cycle Diesel
Bore — in (mm) . . . . . . . . . . . . . . . . . . . . 3.937 (100)
Stroke — in (mm). . . . . . . . . . . . . . . . . . . . 5.00 (127)
Displacement — cu in (liter) . . . . . . . . . . . . . 243 (4)
Combustion System . . . . . . . . . . . . Direct injection
Rotation (from flywheel end) . . . . . . . . . Clockwise
Capacity for Liquids — U.S. gal (L)
Cooling System (engine only)
DINA . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7 (10.3)
DIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.9 (11.0)
DITA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0 (11.4)
Engine pictured with Lube Oil System (refill) typical . . . . . 1.85 (7.01)
Optional Equipment Weight, Net Dry (approximate) — lb (kg)
Naturally Aspirated (NA) . . . . . . . . . . . . 601 (273)
Turbocharged (T). . . . . . . . . . . . . . . . . . . 614 (279)
Turbocharged-Aftercooled (TA) . . . . . 627 (285)
Rated Engine Speed, Full Load
Intermittent — rpm . . . . . . . . . . . . . . . . 2200-2400
Continuous — rpm . . . . . . . . . . . . . . . . 2200-2400
BENEFITS
■ FUEL ECONOMY ■ HIGH PERFORMANCE
Consistent performance and excellent fuel Horsepower and torque capabilities
economy over entire operating range. optimized. Substantial 20 percent torque
rise.
■ BROAD APPLICATION RANGE
Big displacement, more performance for ■ CLEAN AND QUIET POWER
your money, and convenient installation. Cleaner and quieter, free from visible
smoke throughout operational speed range.
■ RELIABILITY AND DIESEL DURABILITY
Diesel tough components and conservative ■ EASY LOW-COST MAINTENANCE
speed for smooth operation and long Convenient positioning of service points on
engine life. right-hand side for easy accessibility.
FEATURES
Options must be selected for the following features. See your Caterpillar dealer for a detailed
description of options for each feature.
Adapter plate Fan and extensions Lubricating oil filter and cooler
Alternator Fan drive Lubricating oil pressure switch
Balancer Flywheel and starter ring Lubricating oil sump
Belt-driven auxiliaries Flywheel housing Paint
Cab heater connections Front end drives Radiator
Cold start aid Fuel filter Rating
Coolant pump and thermostat Fuel pre-filter Starter motor
housing Heater switch Stop and throttle controls
Coolant temperature gauge and Induction manifolds Timing case and gear-driven
sender Lifting eyes auxiliaries
Engine mountings Lubricating oil fillers and Turbocharger, manifolds
Exhaust manifolds breathers LEHH9446 (8-99)
Supersedes LEHH8238-01
3054 INDUSTRIAL ENGINE
PERFORMANCE DATA
Naturally Aspirated Turbocharged
385 N•m (284 lb-ft) 400
200 290
257 N•m (190 lb-ft)
190 260
270
Torque
Torque
180 250
lb-ft
lb-ft
N•m
N•m
325
170 230 230 348 N•m (257 lb-ft)
160 232 N•m (171 lb-ft) 210
150 200 190 250
100
80.5 kW (108 bhp) 70
80 60 90 Intermittent Power
70
Power
80
Power
hp
52 kW (70 bhp)
60
kW
70
hp
Intermittent Power kW 72.5 kW (97 bhp) 50
40 Continuous Power
50 60
47 kW (63 bhp)
40 Continuous Power 50
30 40 30
20
1000 1300 1600 1900 2200 2500 1000 1300 1600 1900 2200 2500
Engine Speed rpm Engine Speed rpm
Turbocharged-Aftercooled DIMENSIONS
340 430 N•m (317 lb-ft) 460
310
Torque
280
lb-ft
N•m
360
250 388 N•m (286 lb-ft)
30.4 in
220 (772 mm)
190 260
140
120 91 kW (122 bhp) 90
Intermittent Power
Power
100
kW
hp
80 60
82 kW (110 bhp) 25.4 in 25.4 in
60 Continuous Power
(646 mm) (646 mm)
40 30
20
1000 1300 1600 1900 2200 2500
Engine Speed rpm
* Consult factory for application approval.
RATING DEFINITIONS AND CONDITIONS
Intermittent is the horsepower and speed Ratings are based on SAE J1995 standard
capability of the engine which can be used for conditions of 29.61 in Hg (100 kPa) and 77° F
about one hour, followed by an hour of (25° C). These ratings also apply at ISO3046/1,
operation at or below the continuous rating. DIN6271, and BS5514 standard conditions of
29.61 in Hg (100 kPa), 81° F (27° C), and 30%
Continuous is the horsepower and speed relative humidity.
capability of the engine which can be used
without interruption or load cycling. Fuel consumption is based on fuel oil having an
LHV of 18 390 Btu/lb (42 780 kJ/kg) and
Additional ratings are available for specific weighing 7.001 lb/U.S. gal (838.9 g/liter). Power
customer requirements. Consult your Caterpillar ratings are based on engine equipped with fuel,
dealer. lube oil and jacket water pumps but without fan.
Materials and specifications are subject to change without notice. The International System of Units (SI) is used in this publication.
LEHH9446 (8-99) Printed in U.S.A. © 1999 Caterpillar Inc.
Supersedes LEHH8238-01 All rights reserved.
