THREE SCREW PUMP

3GC/3GCR,3GCS/3GCSR,3GCG,3GCL PUMP

Name code:
GC---three screw pump for marine purpose
R ---for low viscosity(usually for fuel oil)
S ---double suction type
L ---vertical installation
G ---vertical hangling installation

SILI PUMP,
Your reliable one-stop supplier of marine pumps.
Shanghai SILI PUMP Industry Co., Ltd.
Add: No.128 Jinyuan Road, 201518, Shanghai, China (Jinyuan Industry Area)
Tel: 0086-21-39109967, fax: 0086-21-39109967
Web: www.silipump.com e-mail: [email protected]
(The company reserves the right to make alteration without notice)
 3G series screw spindle pumps

FEATURES 1
PERFORMANCE RANGE 1
CONSTRUCTION 1
MATERIAL 2
SYSTEM CODE 4
3GC\3GCR 50-70
CAPABILITY 5
DIMENSION 6
3GC\3GCR 85-100
CAPABILITY 6
DIMENSION 7

3GCS\ 3GCSR(100-200)
CAPABILITY 8
DIMENSION 8

3GCG(50-110)
CAPABILITY 9
DIMENSION 10

3GCL(50-110)
CAPABILITY 10
DIMENSION 11

3GCLS(100-160)
12
CAPABILITY
12
DIMENSION
 3G series screw spindle pumps
●FEATURES
The three spindle screw pumps consist of general design type 3G,marine usage pump 3GC and
three screw pumps of special design.
The three spindle screw pump is a postive displacement rotary pump. Inside the pump casing,
as the flanks of teeth of drive screw and idler screws are engaged and the screws are also matched
with the three inset holes, several sealed moving chambers are thereby formed in between the pump
inlet and outlet end.These closed chambers will take the medium inside to move from the inlet end
axially and let flow pressurized progressively, to have a continuous, constant ,axial flow pressured
liquid.

●PERFORMANCE RANGE
The three spindle screw pumps are suitable for pumping various kinds of non-corrosive oil
without contents of solid grains and liquids similar to lubricating oils, The viscosity of mediums to
be conveyed range from 1.2 to 100°E(3.0 to 760 cst) ,liquid with a higher viscosity could also be
pumped after heating up (lowering down the viscosity).
The flow range is 0.2~590m3/h, and the maximum working pressure is 100 bar, The highest
temperature is 150℃.

●CONSTRUCTION

1.pump casing 2.screw spindle 3.suction cover

4.upper cover 5.mechanical seal 6.cover of seal

1. Simple in construction: The pump has quite a few construction forms. General for small flow
range 0.2-6.5m3/h, pump casing and insert is made in one part. Mechanical seal is used as the
pump shaft seal.
Pumps of middle and big flow range have a separate insert to be fixed in side the pump
casing .Big pumps are mostly of a double –suction design for horizontal installation. For different
mediums to be pumped mechanical seals or packing seals could be supplied.
For marine application pumps, installation forms could be horizontal and vertical , with marine
AC and DC drivers.

1
 3G series screw spindle pumps
2. Long life time: As the drive screw is driven by motor and there is no mechanical contact
between the drive screw and the idler screws; the idler screw are hydraulically driven by the
pressured liquid; between the drive screw and idler screw, screws set and insert an oil film is
formed, so the mechanical friction is minimized and a longer life is ensured.
3. The medium to be pumped is in a manner of constant axial flow movement, so the pressure
pulsation is almost eliminated, meanwhile the noise is lowered; and as the moving parts have a
very little inertia, the starting torque and vibration is very little.
4. Pump have a very high suction capability.
5. In order to ensure the safe working of pump, motor, piping system, pumps for a capacity higher
than middle flow range are all equipped with safety valves. When working pressure is
exceeding the setting pressure of valves, pressured oil will circulate back to suction chamber.

1.pump casing 2.liner 3.screw spindle 4.lower cover

5.upper cover 6.cover of seal 7.relief valves

●MATERIAL

Material code Casing Insert Using range

Special modular Used to pump the medium (such as fuel oil) with less lubricity and
W1 Cast iron
cast iron suitable viscosity at lower pressure.
Cast AL Used to pump the medium (such as lubricant oil) with better
W2 Cast iron
lubricity and suitable viscosity at lower pressure.
Used in particular case, such as marine pump, to pump the
Cast AL
W3 Nodular cast iron medium(such as lubricant oil )with better lubricity and suitable
viscosity at lower pressure.
Used in particular case, such as marine pump, to pump the
Nodular cast iron
W4 Special modular medium with less lubricity and suitable viscosity as fuel oil at lower
Sp
cast iron pressure.
Used to pump the medium with less lubricity and lower viscosity,
W21 Cast iron Special bronze
such as heavy oil and fuel oil.
Used in particular case, such as marine pump, to pump the medium
W23 Nodular cast iron Special bronze with less lubricity and lower viscosity, such as heavy oil and fuel oil,
at higher pressure.

2
 3G series screw spindle pumps
●SYSTEM CODE
Specifications
Serise FIgure Construction form Main application
Capac, Max.pre.
Single suction Lub.oil or Lub liquid
0.3-94
3GC horizontal Visc.20~150cst 60（bar）
（m3/h）
installation
Double suction
3GCS horizontal 80-590 16
installation
For Lub.oil Single suction
3GCG hanging 10-96 8
installation
Single suction
3GCL 4--96 8
Vertical pedestal
Double suction
3GCLS 88-306 8
Vertical pedestal
Single suction Light oil or Heavy oil 60①
3GCR horizontal Visc.3~365cst 0.3-94
installation 25②
For fuel oil
Double suction
3GCSR horizontal 80-590 16
installation
System Code①for Heavy oil。②for Light oil

3
 3G series screw spindle pumps
●CAPABILITY TABLE(3GC\3GCR(50-70))
Power Allowable
Capacity
Pressure Speed p（kw） Suction Weight Motor
Pump Size P n lift Suction Discharge of Pump Type&Size
bar r/min Input Motor Hs(m) mm mm W
l/min (kg)
m3/h Power power
17.5 291 6 5.2 5.5 132S1-2B3
2900 4.5
16 266 10 8.1 11 160M1-2B3
50×2 80 50 80
8.2 136 6 2.6 3 100L2-4B3
1450 5
7.5 125 10 4.0 5.5 132S-4B3
17.5 291 16 11.6 15 160M-2B3
2900 4.5
16 266 25 16.5 18.5 160L-2B3
50×4A 80 50 90
8.2 136 16 5.8 7.5 132M-4B3
1450 5
7.5 125 25 8.2 11 160M-4B3
3GC
24 400 6 7 11 160M-4B3
3GCR 1450 4.5
23 383 10 9.8 15 160L-4B3
(75cst) 70×2 100 65 105
15 250 6 4.8 5.5 132M2-6B3
970 5
14 233 10 6.5 7.5 160M-6B3
24 400 16 14 18.5 180M-4B3
1450 4.5
22 366 25 20.5 22 180L-4B3
70×4 100 65 120
15 250 16 7.5 11 160L-6B3
970 5
14 233 25 13.5 18.5 200L1-6B3
16 266 4 2900 3.3 5.5 132S1-2B3
50×2 4 80 50 80
7.5 125 4 1450 1.7 2.2 100L1-4B3

16 266 10 2900 8.1 11 160M1-2B3

50×4A 4 80 50 90
3GCR 7.5 125 10 1450 4.0 7.5 132M-4B3
(3cst)
22 366 4 1450 5 7.5 132M-4B3
70×2 4 100 65 105
13 216 4 970 3.5 4 132M1-6B3

22 336 10 1450 9.5 15 160L-4B3

70×4 4 100 65 120
13 216 10 970 6.5 11 160L-6B3

●DIMENSION(3GC\3GCR(50-70))

5
 3G series screw spindle pumps
Pump Size D1 E1 F1 G1 11 n1-d1 D2 E2 F2 G2 12 n2-d2

50×2 φ80 φ125 φ15 0 φ185 18 4-φ18 φ50 φ100 φ125 φ160 20 4-φ18
50×4A φ80 φ125 φ15 0 φ185 18 4-φ18 φ50 φ100 φ125 φ160 18 4-φ18
70×2 φ100 φ140 φ170 φ205 18 4-φ18 φ65 φ120 φ145 φ180 20 4-φ18
70×4 φ100 φ145 φ170 φ205 18 4-φ18 φ65 φ120 φ145 φ180 24 4-φ18

Pump Motor
L1 L2 L3 L4 L5 L6 L7 B1 B2 B3 B4 B5 B6 H1 H2 H3 n-d
Size Frame Size
100L 783 700 400 150 16 95 24 335 275 275 140 140 180 347 202 35 4-φ25
50×2 132S 877 750 450 150 16 95 24 435 385 275 140 140 210 385 202 35 4-φ25
160M 1003 875 575 150 16 95 24 485 425 275 140 140 255 455 230 35 4-φ25
132M 1028 870 470 200 46 190 40 440 380 300 140 140 210 385 202 35 4-φ25
50×4A 160M 1113 992 592 200 46 190 40 490 430 300 140 140 255 455 230 35 4-φ25
160L 1156 992 592 200 46 190 40 490 4430 300 140 140 255 455 230 35
4-φ25
1073 940 630 160 36 140 65 435 375 375 170 170 210 443 260 35 4-φ25
132M
70×2 1158 1060 700 160 36 140 65 480 420 335 170 170 255 485 260 35
160M 4-φ25
1203 1060 700 160 36 140 65 480 420 335 170 170 255 485 260 35
160L 4-φ25
160L 1338 1170 800 180 66 240 115 480 420 365 180 180 255 475 280 35 4-φ25
180M 1363 1220 820 180 66 240 115 510 450 365 180 180 285 530 280 35 4-φ25
70×4 1403 1220 820 180 66 240 115 510 450 365 180 180 285 530 280 35
180L 4-φ25
200L 1468 1250 860 180 66 240 115 550 490 365 180 180 310 575 280 40
4-φ25

●CAPABILITY TABLE(3GC\3GCR(85-100))
Power
Capacity Allowable
speed （kw） Weight Motor
pressure Suction lift
Pump Size n Input Motor Suction Discharge of Pump Type&Size
bar Hs(m) mm mm W
m3/h l/min r/min Pow Power
(kg)
er
43 716 6 12.5 15 160L-4B3
1450 4.5
40 666 10 18 22 180L-4B3
85×2 125 80 158
28 466 6 8.5 11 160L-6B3
970 5
25 416 10 10 15 180L-6B3
43 716 16 25 30 200L-4B3
1450 4.5
40 666 25 36 45 225M-4B3
85×4 125 80 178
28 466 16 19.5 22 200L2-6B3
970 5
25 416 25 25.4 30 225M-6B3
3GC 70 1166 6 20 22 180L-4B3
3GCR 1450 4
68 1133 10 27.7 30 200L-4B3
(75cst) 100×2 150 100 200
45 750 6 13.8 15 180L-6B3
970 4.5
43 716 10 18.2 22 200L2-6B3
94 1566 6 23 30 200L-4B3
1450 4
90 1500 10 34 45 225M-4B3
110×2 200 150 225
60 1000 6 970 17.3 18.5 200L1-6B3
4.5
56 933 10 27.7 30 225M-6B3
94 1566 16 1450 53 75 280S-4B3
90 1500 25 80 90 4 280M-4B3
110×4 200 150 325
60 1000 16 970 36 45 280M-6B3
4.5
56 933 25 48 55 280M-6B3
40 666 4 1450 8 15 160L-4B3
85×2 4 125 80 158
25 416 4 970 4.2 11 160L-6B3
40 666 10 1450 20 22 180L-4B3
85×4 4 125 80 178
25 416 10 970 10.3 15 180L-6B3
3GCR 68 1133 4 1450 12.7 22 180L-4B3
100×2 4 150 100 200
(3cst) 42 700 4 970 7.5 15 180L-6B3
90 1500 4 1450 20 30 200L-4B3
110×2 4 200 150 225
56 933 4 970 13.9 18.5 200L1-6B3
90 1500 10 1450 34 45 225M-4B3
110×4 4 200 150 325
56 933 10 970 23 30 225M-6B3

6
 3G series screw spindle pumps
●DIMENSION(3GC\3GCR(85-100))

Pump Size D1 E1 F1 G1 11 n1-d1 D2 E2 F2 G2 12 n2-d2

85×2 φ125 φ185 φ210 φ245 24 8-φ18 φ80 φ135 φ160 φ195 22 4-φ18
85×4 φ125 φ185 φ210 φ245 24 8-φ18 φ80 φ135 φ160 φ195 26 4-φ18
100×2 φ150 φ200 φ225 φ260 20 8-φ18 φ100 φ155 φ180 φ215 25 8-φ18
110×2 φ200 φ242 φ265 φ295 20 12-φ16 φ150 φ188 φ210 φ240 18 12-φ16
110×4 φ200 φ242 φ265 φ295 20 12-φ16 φ150 φ200 φ228 φ270 30 12-φ23

Motor
Pump
Frame L1 L2 L3 L4 L5 L6 L7 B1 B2 B3 B4 B5 B6 H1 H2 H3 n-d
Size
Size
160L 1266 1130 70 220 26 165 70 485 430 380 200 200 255 515 290 35 4-φ25
85×2
180L 1330 1190 750 220 26 165 70 535 460 380 200 200 285 540 290 35 4-φ25
180L 1484 1325 875 230 61 295 157 500 440 440 180 180 240 525 310 35 4-φ25
85×4 200L 1553 1420 900 250 61 295 135 595 535 380 200 200 335 575 310 35 4-φ25
225M 1630 1420 900 250 61 295 135 595 535 380 200 200 345 640 335 35 4-φ25
180L 1459 1315 810 250 55 210 70 560 500 500 220 220 285 613 320 40 4-φ25
100×2
200L 1522 1315 810 250 55 210 70 560 500 500 220 220 310 613 320 40 4-φ25

200L 1566 1350 850 250 66 205 75 610 540 540 260 250 310 635 335 40 4-φ25
110×2
225M 1637 1405 905 250 66 205 75 610 540 540 260 250 345 640 340 40 4-φ25
225M 1862 1520 820 350 171 380 45 760 680 540 260 250 345 650 350 50 4-φ25
110×4 280S 2011 1700 1000 350 171 380 45 760 680 540 260 250 410 695 395 50 4-φ25
280M 2061 1700 1000 350 171 380 45 760 680 540 260 250 410 695 395 50 4-φ25

7
 3G series screw spindle pumps
●CAPABILITY TABLE(3GCS\3GCSR(100-200))
Power
P Allowable
Capacity pressure speed Weight Motor
Suction lift
Pump Size P n （kw） Suction Discharge of Type&Size
Hs(m)
bar r/min Input Motor mm mm Pump
m3/h l/min W(kg)
Power Power
146 2433 6 35 45 225M-4B3
140 2333 10 1450 50 55 250M-4B3
132 2200 16 80 90 280M-4B3
100×2 4 250 150 420
90 1500 6 26 30 225M-6B3
86 1433 10 970 32.5 37 225M-6B3
80 1333 16 43 55 280M-6B3
300 5000 6 68 75 280S-4B3
292 4866 10 1450 102 110 315S-4B3
3GCS 280 4662 16 160 200 355S2-4B3
160D×3 4 300 200 520
3GCSR 194 3230 6 48 55 280M-6B3
(75cst) 186 3096 10 970 66 75 315S-6B3
180 2997 16 98 110 315L1-6B3
590 9823 6 135
160 315L1-4B3
570 9490 10 1450 200
250 355S4-4B3
550 9157 16 320
200D×3 4 400 300 650
380 6327 6 90
110 315L1-6B3
370 6160 10 970 135
160 355S2-6B3
360 5994 16 215

●DIMENSION(3GCS\3GCSR(100-200))

Motor
Pump Size Frame L1 L2 L3 L4 L5 L6 B1 B2 B3 B4 B5 B6 B7 H1 H2 H3 n-d
Size
225M 1769 1505 900 300 100 35 640 560 500 560 500 280 365 680 395 50 4-φ25
100×2 250M 1855 1570 900 300 100 35 695 615 555 540 480 280 435 700 395 50 4-φ25
280M 1987 1650 1080 300 100 35 745 665 613 540 480 280 465 759 405 50 4-φ30
280S 2106 1738 1180 285 175 － 745 665 613 600 550 340 465 950 485 40 4-φ30
280M 2157 1738 1180 285 175 － 745 665 613 600 550 340 465 950 485 40 4-φ30
160D×3 315S 2460 1860 1250 290 170 － 770 690 640 600 550 340 465 970 485 50 4-φ30
315L 2510 1860 1250 290 170 － 770 690 640 600 550 340 465 970 485 50 4-φ30
355S 2710 2250 1350 290 170 － 975 895 835 600 550 340 600 1070 475 40 4-φ30
315L 2630 2175 1450 325 210 － 770 690 640 600 730 450 450 1048 525 50 4-φ30
200D×3
355S 2830 2245 1500 325 210 － 975 895 835 640 730 450 600 1148 525 50 4-φ30

Pump Size D1 E1 F1 G1 11 n1-d1 D2 E2 F2 G2 12 n2-d2

100×2 φ250 φ305 φ330 φ365 24 12-φ18 φ150 φ188 φ210 φ240 24 12-φ16
160D×3 φ300 φ362 φ396 φ435 35 12-φ23 φ200 φ265 φ295 φ335 35 12-φ23
200D×3 φ450 φ518 φ550 φ590 40 16-φ23 φ300 φ368 φ400 φ440 40 12-φ23

8
 3G series screw spindle pumps
●CAPABILITY TABLE(3GCG(50-110))
Power Allowable
Capacity pressure speed Weight Motor
（kw） Suction lift
Pump Size n Suction Discharge of Type&Size
Input Motor Hs(m)
m3/h l/min bar r/min mm mm Pump
Power Power W(kg)
YH112M-2V1
18 300 4 3.6 4
Z2C-32
YH132S1-2V1
17.5 290 6 2900 5.2 5.5
Z2C-41
50×2 4.5 80 50 95
YH132S-2V1
16 265 8 7.2 7.5
Z2C-42
Z2C-51
10 165 5 2100 3.2 5
D2L（幅压）
YH132S-4V1
25 415 4 5.0 5.5
Z2C-51
1450 4.5 100 65 135 YH160M-4V1
70×2 24 410 6 7 11
Z2C-52
3GCG
23.5 400 8 9 11 YH160M-4V1
(75cst)
YH180M-4V1
72 1200 4 16 18.5
Z2C-71
1450 4 150 100 198 YH180L-4V1
100×2 70 1165 6 20 22
Z2C-72
YH200L-4V1
69 1150 8 24 30
Z2C-81
YH180L-4V1
96 1600 4 17 22
Z2C-72
YH200L-4V1
110×2 94 1565 6 1450 23 30 4 200 150 230
Z2C-81
YH225S-4V1
92 1530 8 29 37
Z2C-82

●DIMENSION(3GCG(50-110))

9
 3G series screw spindle pumps
●DIMENSION(3GCG(50-110))
Motor Frame
Pump size L1 L2 L3 L4 B1 B2 B3 B4 H1 H2 H3 H4 H5
Size
112M 311 181 300 180 345 310 260 130 851 269 95 14 469
132S 311 181 300 180 345 310 260 130 933 269 95 14 469
Z2C-32 311 181 300 180 345 310 260 130 969 269 95 14 469
3GCG50×2
Z2C-41 311 181 300 180 345 310 260 130 939 269 95 14 469
Z2C-42 311 181 300 180 345 310 260 130 974 269 95 14 469
Z2C-51 311 181 300 180 345 310 260 130 1044 269 95 14 469
132S 410 210 400 200 500 440 340 170 1082 376 140 17 638
160M 410 210 400 200 500 440 340 170 1182 376 140 17 638
3GCG70×2
Z2C-51 410 210 400 200 500 440 340 170 1200 376 140 17 638
Z2C-52 410 210 400 200 500 440 340 170 1240 376 140 17 638
1465 476 210 24 855
180M 418 193 450 260 540 480 440 220
1503 476 210 24 855
180L 418 193 450 260 540 480 440 220
1565 476 210 24 855
3GCG100×2 200L 418 193 450 260 540 480 440 220
1630 476 210 24 855
Z2C-71 418 193 450 260 540 480 440 220
1670 476 210 24 855
Z2C-72 418 193 450 260 540 480 440 220
1705 476 210 24 855
Z2C-81 485 193 530 260 600 540 440 220
180L 515 315 400 220 620 560 500 250 1545 527 205 25 920
200L 515 315 400 220 620 560 500 250 1605 527 205 25 920
225S 590 315 550 220 660 600 500 250 1626 527 205 25 920
3GCG110×2
Z2C-71 590 315 550 220 660 600 500 250 1732 527 205 25 920
Z2C-72 590 315 550 220 660 600 500 250 1767 527 205 25 920
Z2C-81 590 315 550 220 660 600 500 250 1802 527 205 25 920

Pump Size D1 F1 G1 11 n1-d1 D2 F2 G2 12 n2-d2 n-d

3GCG50×2 80 138 170 15 8-φ16 50 103 135 15 6-φ16 4-φ14

3GCG70×2 100 158 190 15 8-φ16 65 123 155 15 6-φ16 4-φ18

3GCG100×2 150 208 240 15 12-φ16 100 158 190 16 8-φ16 4-φ23

3GCG110×2 200 264 295 16 12-φ16 150 208 240 16 12-φ16 4-φ23

●CAPABILITY TABLE(3GCL(50-110))
Power
Capacity P Allowable
pressure speed Suction
（kw） Weight Motor Type&Size
Pump Size P n lift Suction Discharge
of Pump
bar r/min Input Motor Hs(m) mm mm
m3/h l/min W(kg)
Power Power
18 300 4 3.6 4 112M-2V1
17.5 290 6 2900 5.2 5.5 132S1-2V1
16 265 8 7.2 7.5 132S2-2V1
50×2 4.5 80 50 147
9 150 4 1.9 2.2 100L1-4V1
8.2 135 6 1450 2.6 3 100L2-4V1
7.5 125 8 3.6 4 112M-4V1
25 415 4 5 5.5 132S-4V1
24.5 405 6 1450 7 11 160M-4V1
24 400 8 9 11 160M-4V1
70×2 4.5 100 65 180
16 265 4 3.3 4 132M1-6V1
15 250 6 970 4.8 5.5 132M2-6V1
14 230 8 5.9 7.5 160M-6V1
44 730 4 9.5 11 160M-6V1
43 715 6 1450 12.5 15 160L-6V1
3GCL 41 680 8 15 18.5 180M-6V1
85×2 4.5 125 80 265
(75cst) 30 500 4 6.7 7.5 160M-6V1
28 465 6 970 8 11 160L-6V1
26 430 8 10 15 180L-6V1
72 1198 4 16 18.5 180M-4V1
70 1165 6 1450 20 22 180L-4V1
100× 69 1150 8 25 30 200L-4V1
4 150 100 320
2 47 780 4 970 9.6 11 160L-6V1
45 750 6 13.5 15 168L-6V1
43 715 8 16.4 18.5 200L1-6V1
96 1560 4 1450 17 22 180L-4V1
94 1565 6 23 30 200L-4V1
110× 92 1530 8 29 37 225S-4V1
4 200 150 352
2 63 1050 4 970 12.8 15 180L-6V1
60 1000 6 16.7 18.5 200L1-6V1
56 930 8 18.5 22 200L2-6V1

10
 3G series screw spindle pumps
●DIMENSION(3GCL(50-110))

Pump size Motor Frame Size L1 L2 L3 L4 B1 B2 B3 B4 H1 H2 H3 H4 n-d

100L 350 145 190 170 350 145 － 210 847 240 175 40 4-φ27
3GCL50×2
112M 350 145 190 180 350 145 － 210 892 240 175 40 4-φ27
132S 350 145 190 230 350 145 － 210 974 240 175 40 4-φ27
132S 400 170 230 230 400 170 － 260 1114 300 220 40 4-φ27
3GCL70×2
132M 400 170 230 230 400 170 － 260 1151 300 220 40 4-φ27
160M 400 170 230 260 400 170 － 260 1244 300 220 40 4-φ27
160L 470 205 300 260 470 205 － 340 1337 325 160 40 4-φ27
3GCL85×2 160M 470 205 300 260 470 205 － 340 1293 325 160 40 4-φ27
180L 470 205 300 275 470 205 － 340 1397 325 160 40 4-φ27
180M 470 205 300 275 1359 325 160 40
470 205 － 340 4-φ27
160L 520 200 280 260 520 200 － 335 1479 400 280 40 4-φ27
3GCL100×2 180M 520 200 280 260 520 200 － 335 1500 400 280 40 4-φ27
180L 520 200 280 274 520 200 － 335 1538 400 280 40 4-φ27
200L 520 200 280 335 1600 400 280 40
520 200 － 335 4-φ27
180L 560 225 340 275 560 230 130 385 1578 425 340 40 8-φ23
3GCL110×2 200L 560 225 340 335 560 230 130 385 1640 425 340 40 8-φ23
225S 560 225 340 365 560 230 130 385 1684 425 340 40 8-φ23

Pump Size D1 E1 F1 G1 L1 n1-d1 D2 E2 F2 G2 L2 n2-d2

3GCL50×2 80 118 138 170 14 6-φ14 50 84 103 135 13 6-φ14

3GCL70×2 100 138 158 190 14 8-φ14 65 110 132 170 15 8-φ16
3GCL85×2 125 185 210 245 22 10-φ16 80 135 160 195 24 8-φ16
3GCL100×2 150 190 208 240 14 10-φ14 100 146 167 205 16 10-φ16
3GCL110×2 200 247 264 295 15 12-φ14 150 196 217 225 15 12-φ16

11
 3G series screw spindle pumps
●CAPABILITY TABLE(3GCLS(100-160))
Power
Capacity P Allowable
pressure speed Weight Motor
（KW） Suction lift
Pump Size P n Suction Discharge of Type&Size
Hs(m)
bar r/min Input Motor mm mm Pump
m3/h l/min W(kg)
Power Power
150 2495 4 30 37 225S-4V1
146 2430 6 1450 35 55 250M-4V1
142 2360 8 39 55 250M-4V1
100×2 4 250 150 577
94 1565 4 22 30 225M-6V1
90 1500 6 970 26 30 250M-6V1
88 1465 8 33 37 250M-6V1
200 3330 4 30 37 225S-4V1
196 3260 6 1450 46 55 250M-4V1
110×2 192 3195 8 61 75 280S-4V1
3GCLS 4 250 200 610
128 2130 4 23 30 225M-6V1
(75cst) 124 2060 6 970 34.8 37 250M-6V1
120 2000 8 38.9 45 280S-6V1
306 5090 4 45 55 250M-4V1
300 4995 6 1450 68 75 280S-4V1
295 4910 8 89 110 315S-4V1
160D×3 4 300 200 705
200 3330 4 33 37 250M-6V1
194 3230 6 970 48 55 280M-6V1
188 3130 8 62 75 315S-6V1

●DIMENSION(3GCLS(100-160))

Motor Frame
Pump Size Size
L1 L2 L3 L4 L5 B1 B2 B3 B4 B5 H1 H2 H3 n-d

3GCLS 225S 700 650 285 105 365 650 285 175 215 370 1909 496 50 8-φ34
100×2 225M 700 650 285 105 365 650 285 175 215 370 1964 496 50 8-φ34
250M 700 650 285 105 435 650 285 175 215 370 1981 496 50 8-φ34
650 285 175 215 431 8-φ34
3GCLS 225S 700 650 285 105 365 1934 496 50
650 285 175 215 431
225M 700 650 285 105 365 1989 496 50 8-φ34
110×2 650 285 175 215 431
250M 700 650 285 105 435 2006 496 50 8-φ34
650 285 175 215 431
280S 700 650 285 105 435 2157 496 50 8-φ34
250M 900 800 350 105 435 800 350 200 265 569 2068 511 50 8-φ41
3GCLS 280S 900 800 350 105 465 800 350 200 265 569 2219 511 50 8-φ41
160D×3 280M 900 800 350 105 465 800 350 200 265 569 2270 511 50 8-φ41
315S 900 800 350 105 567 800 350 200 265 569 2270 511 50 8-φ41

Pump Size D1 E1 F1 G1 L1 n1-d1 D2 E2 F2 G2 L2 n2-d2

3GCLS100×2 250 300 350 390 28 12-φ23 200 265 295 335 30 12-φ23
3GCLS100×2 250 300 350 390 30 12-φ23 200 265 295 335 30 12-φ23
3GCLS160D×3 300 368 400 440 35 12-φ25 250 320 350 390 40 12-φ23

12