Data sheet

L-9517-9736-02-C

ATOM DX™ miniature encoder system

The ATOM DX encoder series is Renishaw’s • Miniature, all-in-one, digital output optical
encoder with resolutions down to 2.5 nm
smallest incremental optical encoder with
• Class leading signal stability and dirt immunity
digital output direct from the readhead, due to filtering optics
providing positional feedback, onboard
• Long-term stability provided by integral Auto Gain
interpolation, and filtering optics all in Control (AGC) and Auto Offset Control (AOC)
a miniature package. • Low Sub-Divisional Error (SDE) and jitter
ATOM DX incorporates the market proven filtering optical
• Integrated set-up LED for ease of installation
system of the ATOM™ encoder series, and integrates
Renishaw’s high-performance interpolation technology, • Maximum speed up to 20 m/s
reducing system size and removing the need for additional (3.63 m/s @ 0.1 μm resolution)
adaptors and interfaces. This makes ATOM DX suitable for
the most space constrained applications where performance • Available in 20 µm and 40 µm scale pitch
cannot be compromised. versions
Constructed with Renishaw’s integrated set-up LED for an intuitive • Range of high accuracy linear and rotary
and simple installation process based on the well-established scales with auto-phase bi-directional optical
auto-calibration routine, ATOM DX is ready to install straight from reference mark
the box. It is compatible with the optional ADTi-100 Advanced
Diagnostic Tool and ADT View software to give in-depth advanced
• Optional Advanced Diagnostic Tool
diagnostic information to aid optimisation of encoder installation and
ADTi -100 to optimize set-up and assist
in-field fault finding to satisfy the most demanding motion control
with system diagnostics
applications. • Available in two variants; cabled and top exit,
ATOM DX can be used with the ATOM series of linear and rotary for the most demanding space constrained
scales to meet most application requirements. installations
Data sheet
ATOM DX encoder system

System features

High performance
XX Performance in speed XX Performance in a miniature head
ATOM DX encoders offer maximum speeds up to ATOM DX fits in to the smallest applications with heights as
20 m/s and a range of high-speed interpolation low as 7.85 mm. The top exit variant offers all the benefits and
options. features of the cabled ATOM DX encoder, but in an even smaller
package. The top exit variant is a component encoder with the
XX Performance in scale cable assembly integrated separately to the readhead, making
TOM DX offers linear tape scales with specified
A the ATOM DX top exit suitable for the smallest spaces.
overall accuracy to ±5 µm/m @20 °C, reducing the
need for 2-point compensation. XX Performance over contamination
ATOM DX features the proven filtering optics of the ATOM
XX Performance in velocity control encoder range. This optical scheme is tuned to a specific spatial
ATOM DX incorporates Renishaw’s latest frequency, so it rejects other harmonics, including those caused
interpolation technology with updated signal by dirt or other contaminants. The result is a Lissajous with high
processing algorithms to reduce Sub-Divisional purity, that retains its fidelity even when the scale is exposed to
Error (SDE). This helps to reduce velocity ripple contamination: ideal for applications where reliability is critical.
and improve closed loop feedback in motion
control systems.

Optional Advanced Diagnostic Tool ADTi-100

The ATOM DX encoder system is compatible with the

Advanced Diagnostic Tool ADTi-100 and ADT View software,
which provides comprehensive real-time encoder data
feedback to aid more challenging installations and diagnostics.
The intuitive software interface can be used for:
• Remote calibration
• Signal optimization over the entire axis length
• Reference mark indication
• Digital readout of encoder position (relative to scale)
• Monitoring velocity
• Exporting and saving data

Compatible scales
XX Stainless steel tape scale (RTLF):
High-accuracy scales with graduations directly marked onto
the steel tape surface. Available on reels for cut-to-length
convenience.

XX Glass linear spars (RCLC):

Conventional glass scales, available in lengths up to 130 mm.

XX Glass discs (RCDM):

High-accuracy rotary scales with outer diameters down to 17 mm.

2
 Data sheet
ATOM DX encoder system

ATOM DX cabled readhead dimensions

Dimensions and tolerances in mm

1.4 (40 µm version)

1.9 (20 µm version)

Readhead 6.45
2 datum faces
Set-up LED
3 10.25

12.7 8.7 11.7

4.85*

Datum face
4.15
2 Ø9 max
Readhead /
scale orientation
16.5 3 off mounting holes
Ø2.5 min through
20.5

R>20 Dynamic bend radius

R>10 Static bend radius
5 min
Ø3
.5
ma
x

Identification marks for readhead manufacture only.

Notches will vary depending on readhead type.

*Not optical centreline.

ATOM DX top exit readhead dimensions

Dimensions and tolerances in mm

1.4 (40 µm version)

1.9 (20 µm version)
Set-up LED 11
10.45 6.45
2
Readhead 10.25
datum faces

8.37
12.7 8.7
4.85*
2.8
Datum face
4.15
Ø9 max
Readhead / 2
scale orientation
16.5 3 off mounting holes
Ø2.5 min through
20.5

Identification marks for readhead manufacture only.

Notches will vary depending on readhead type.

*Not optical centreline.

3
Data sheet
ATOM DX encoder system

General specifications
Power supply 5 V −5  /+10% Typically <200 mA fully terminated
Power from a 5 V dc supply complying with the requirements for
SELV of standard IEC BS EN 60950-1
Ripple 200 mVpp maximum@frequency up to 500 kHz
Temperature Storage −20 °C to +70 °C
Operating 0 °C to +70 °C
Humidity 95% relative humidity (non-condensing) to EN 60068-2-78
Sealing IP40
Acceleration (system) Operating 400 m/s², 3 axes
Shock (system) Operating 1000 m/s², 6 ms, ½ sine, 3 axes
Vibration Operating 100 m/s² max @ 55 Hz to 2000 Hz, 3 axes
Mass Standard readhead 3.2 g
Top exit readhead 2.9 g
Cable 18 g/m
EMC compliance BS EN 61326-1: 2013 (cabled readhead variant only)
Cable 10 core, high flex, EMI screened cable, outside diameter 3.5 mm maximum
Flex life >20 × 10 6 cycles at 20 mm bend radius, maximum length 3 m
(Extension cable up to 25 m when using Renishaw approved extension cable)

UL recognised component
Top exit cables available in lengths from 0.5 m to 3 m with 15 way D-type or
10 way JST (SH) connector options
Cabled readhead connector options 9 way D-type
15 way D-type (standard and alternative pin out)
10 way JST (SH)
Top exit readhead connector 10 way JST (SUR)
Typical Sub-Divisional Error 20 µm version <±75 nm
(SDE) 40 µm version <±120 nm

4
 Data sheet
ATOM DX encoder system

RTLF tape scale installation drawing (cabled readhead variant shown)

Dimensions and tolerances in mm
40 µm version
(Yaw tol. ±1°)
0.39

(Roll tol. ±1°)

20 µm version 0.22
(Yaw tol. ±0.5°)
0.18 Reference mark
1.02 ±0.25 Reference mark Set-up
Scale datum edge
LED
50 50

8
Readhead / scale orientation
4.5 12
Datum clamp

(Pitch tol. ±1°)

Scale thickness 0.41
0.36

Rideheight (for calibration):

2.5 ±0.08 (40 µm version)
Forward direction of readhead
relative to scale 2.5 ±0.04 (20 µm version)
Operating rideheight:
2.5 ±0.11 (40 µm version)
For detailed installation drawings refer to www.renishaw.com/opticalencoders 2.5 ±0.055 (20 µm version)

Technical specifications
Material Hardened and tempered martensitic stainless steel fitted with a self-adhesive
backing tape
Form (H × W) 0.41 mm × 8 mm (including adhesive)
Pitch 20 μm and 40 μm
Datum fixing Adhesive datum clamp (A-9585-0028) secured with Loctite ® 435™
Reference mark Auto-phase optical reference mark repeatable to unit of resolution throughout
specified speed and temperature range.
Customer de-selectable reference marks at 50 mm spacing
Reference mark in the centre of scale for lengths <100 mm
Accuracy (at 20 °C) RTLF40H-S ±5 μm/m
RTLF40-S ±15 μm/m
RTLF20-S ±5 μm/m
Coefficient of thermal expansion 10.1 ±0.2 μm/m/°C*
(at 20 °C)
Length 10 mm to 90 mm in 10 mm increments
100 mm to 10 m in 50 mm increments (>10 m available on request)†
Measuring length = Overall length L − 3 mm
Mass 12.2 g/m

*Substrate coefficient of thermal expansion does not need to match that of the scale.
† 
Maximum recommended axis length 1 m for 20 µm systems.

For further information contact your local Renishaw representative.

5
Data sheet
ATOM DX encoder system

RCLC glass spar installation drawing (cabled readhead variant shown)

Dimensions and tolerances in mm

40 µm version
( Yaw tol. ±1°)
End reference mark Mid reference mark
0.39
head orientation head orientation

20 µm version (Roll tol. ±1°)

Readhead ( Yaw tol. ±0.5°) 0.22
datum face L / 2
0.18

1.42 ±0.25 Scale datum edge 6.82 ±0.25

5 Set-up LED

A-9404-4018

Reference mark 6.35

Reference mark
Readhead/ scale orientation

Adhesive datum clamp

( length 8 -16, width 1- 5 )

Scale thickness 1.1

(Pitch tol. ±1°)

0.36

Rideheight (for calibration):

2.5 ±0.08 (40 µm version)
Forward direction of readhead Forward direction of readhead 2.5 ±0.04 (20 µm version)
relative to scale relative to scale
Operating rideheight:
2.5 ±0.11 (40 µm version)
2.5 ±0.055 (20 µm version)

For detailed installation drawings refer to www.renishaw.com/opticalencoders

Technical specifications
Material Soda lime glass fitted with a self-adhesive backing tape
Form (H × W) 1.1 mm × 6.35 mm (including adhesive)
Pitch 20 μm and 40 μm
Datum fixing Fillet of adhesive (A-9531-0342) on one side of the scale
Reference mark Auto-phase optical reference mark repeatable to unit of resolution throughout specified
speed and temperature range.
Either mid or one end of travel; determined by orientation of the readhead
Accuracy (at 20 °C) ±3 μm
Coefficient of thermal expansion ~8 μm/m/°C
Length Overall length L (mm) 10* 18 30 55 80 100 105 130
Measuring length (mm) 7 15 27 52 77 97 102 127

Mass 13.9 g/m

*20 µm pitch RCLC scale only.

6
Data sheet
ATOM DX encoder system

RCDM rotary disc installation drawing (cabled readhead variant shown)

Dimensions and tolerances in mm
Centre of alignment band
Set-up LED
10.25 ± F

Glass disc

A±E
Reference mark

Forward direction Centre of alignment band

of disc Black mask on
(increasing count) reverse of disc
Alignment band underneath
incremental and
reference track.
(Roll tol. ±1°)
D1 See installation
0.22 guide for more
details.
D2

D3

(Pitch tol. ±1°)

0.36

*Operating rideheight:
2.5 ±0.11 (40 µm version)
2.5 ±0.055 (20 µm version)

Rideheight (for calibration)*:

2.5 ±0.08 (40 µm version) 2.3 ±0.1 For detailed installation drawings refer to
2.5 ±0.04 (20 µm version) www.renishaw.com/opticalencoders

Radial tolerance E Longitudinal

Line count Optical
Disc size D1 D2 D3 A (mm) tolerance F (mm)
diameter
(mm) 20 μm 40 μm (mm) (mm) (mm) (mm) 20 μm 40 μm 20 μm 40 μm
(mm)
version version version version version version
17 – 1 024 3.275 8.1 16.9 13.04 10.63 – 0.1 – 0.1
20 – 1 250 3.275 11 19.9 15.92 12.07 – 0.1 – 0.1
25 – 1 650 6.46 16.1 24.9 21.01 14.62 – 0.125 – 0.075
27 – 1 800 9.625 18 26.9 22.92 15.57 – 0.125 – 0.075
30 4 096 2 048 12.8 21.15 29.9 26.08 17.15 0.1 0.125 0.075 0.125
36 5 000 2 500 12.8 26.9 35.9 31.83 20.03 0.125 0.175 0.075 0.2
50 7 200 3 600 25.5 40.9 49.9 45.84 27.03 0.125 0.2 0.075 0.2
56 8 192 4 096 25.5 47.25 55.9 52.15 30.19 0.125 0.2 0.1 0.225
68 10 000 5 000 25.5 58.55 67.9 63.66 35.94 0.15 0.2 0.125 0.3
108 16 384 8 192 50.9 99.2 107.9 104.3 56.26 0.2 0.2 0.225 0.3

Technical specifications
Material Soda lime glass
Form 2.3 mm thick
Pitch 20 μm and 40 μm
Reference mark Single reference mark
Graduation accuracy Disc size (mm) 17 20 25 27 30 36 50 56 68 108
Graduation accuracy
15.81 12.95 9.82 9 7.91 6.49 4.5 3.95 3.24 2.78
(arc seconds)

Coefficient of thermal expansion ~8 μm/m/°C

Nominal outer diameter 40 μm 17, 20, 25, 27, 30, 36, 50, 56, 68, 108
(mm) 20 μm 30, 36, 50, 56, 68, 108

7
Data sheet
ATOM DX encoder system

Speed
20 µm encoder

Clocked Maximum speed (m/s)

Minimum
output Readhead type edge
option separation*
D X Z W Y H M I O Q R
(MHz) (ns)
(5 μm) (1 μm) (0.5 μm) (0.2 μm) (0.1 μm) (50 nm) (40 nm) (20 nm) (10 nm) (5 nm) (2.5 nm)
50 10 10 10 7.25 3.63 1.813 1.450 0.725 0.363 0.181 0.091 25.1
40 10 10 10 5.80 2.90 1.450 1.160 0.580 0.290 0.145 0.073 31.6
25 10 10 9.06 3.63 1.81 0.906 0.725 0.363 0.181 0.091 0.045 51.0
20 10 10 8.06 3.22 1.61 0.806 0.645 0.322 0.161 0.081 0.040 57.5
12 10 10 5.18 2.07 1.04 0.518 0.414 0.207 0.104 0.052 0.026 90.0
10 10 8.53 4.27 1.71 0.85 0.427 0.341 0.171 0.085 0.043 0.021 109
08 10 6.91 3.45 1.38 0.69 0.345 0.276 0.138 0.069 0.035 0.017 135
06 10 5.37 2.69 1.07 0.54 0.269 0.215 0.107 0.054 0.027 0.013 174
04 10 3.63 1.81 0.73 0.36 0.181 0.145 0.073 0.036 0.018 0.009 259
01 4.53 0.91 0.45 0.18 0.09 0.045 0.036 0.018 0.009 0.005 0.002 1038

40 µm encoder

Clocked Maximum speed (m/s) Minimum

output Readhead type edge
option separation*
T D G X Z W Y H M I O Q
(MHz) (10 μm) (5 μm) (2 μm) (1 μm) (0.5 μm) (0.2 μm) (0.1 μm) (50 nm) (40 nm) (20 nm) (10 nm) (5 nm)
(ns)

50 20 20 20 20 18.13 7.25 3.63 1.813 1.450 0.725 0.363 0.181 25.1

40 20 20 20 20 14.50 5.80 2.90 1.450 1.160 0.580 0.290 0.145 31.6
25 20 20 20 18.13 9.06 3.63 1.81 0.906 0.725 0.363 0.181 0.091 51.0
20 20 20 20 16.11 8.06 3.22 1.61 0.806 0.645 0.322 0.161 0.081 57.5
12 20 20 20 10.36 5.18 2.07 1.04 0.518 0.414 0.207 0.104 0.052 90.0
10 20 20 17.06 8.53 4.27 1.71 0.85 0.427 0.341 0.171 0.085 0.043 109
08 20 20 13.81 6.91 3.45 1.38 0.69 0.345 0.276 0.138 0.069 0.035 135
06 20 20 10.74 5.37 2.69 1.07 0.54 0.269 0.215 0.107 0.054 0.027 174
04 20 18.13 7.25 3.63 1.81 0.73 0.36 0.181 0.145 0.073 0.036 0.018 259
01 9.06 4.53 1.81 0.91 0.45 0.18 0.09 0.045 0.036 0.018 0.009 0.005 1038
*For a readhead with a 1 m cable.

Angular speed depends on disc diameter - use the following equation to convert to rev /min.
V × 1000 × 60
Angular speed (rev/min) = Where V = maximum linear speed (m / s) and D = optical diameter of RCDM (mm)
pD

Output signals Cabled Top Exit

15 way D-type
9 way D-type 15 way D-type 10 way JST † 10 way JST ‡
Function Signal Colour alternative
(A) (D) (K) (Z)
pin-out (H)
5V Brown 5 7, 8 4, 12 10 10
Power
0V White 1 2, 9 2, 10 2 9
+ Red 2 14 1 9 5
A
− Blue 6 6 9 7 6
Incremental
+ Yellow 4 13 3 4 8
B
− Green 8 5 11 1 7

Reference + Violet 3 12 14 8 4
Z
mark − Grey 7 4 7 5 3
Alarm E − Orange – 3 13 6 2
Remote CAL CAL Clear 9 1 5 3 1
Shield – Screen Case Case Case Ferrule –

†
 PCB mount mating connectors - Top entry: BM10B-SRSS-TB Side entry: SM10B-SRSS-TB.
‡ 
Connector on top exit readhead only. Mating connector 10SUR - 32S.

8
Data sheet
ATOM DX encoder system

Electrical connections
Grounding and shielding
Customer
Cabled
Readhead electronics
readhead
termination  / connector
5V

Output
signals

0V
Shield

IMPORTANT: The shield should be connected to the machine earth (Field Ground).
 For JST variants the ferrule should be connected to the machine earth.

Customer
Top exit electronics
readhead
5V

Output
signals

Shield 0V

For more information on top exit readheads refer to installation guide.

Maximum readhead cable length: 3 m

Maximum extension cable length: Dependent on cable type, readhead cable length and clock speed.
  Contact your local subsidiary for more information.

Recommended signal termination

Digital outputs Single ended alarm signal termination

0V
(Not available with ‘A’ cable termination)
Readhead Customer
220 pF
A B Z+ electronics 5V
Readhead Customer
4k7 electronics
Cable Z 0 = 120R 120R

1k8
A B Z−
220 pF 100R
E−
0V 4k7 100nF

Standard RS422A line receiver circuitry

Capacitors recommended for improved noise immunity

Remote CAL operation

CAL

Remote system calibration (CAL) is possible via the CAL pin.

0V

9
Data sheet
ATOM DX encoder system

Output specifications
Digital output signals
Form – Square wave differential line driver to EIA RS422A

Incremental* 2 channels A and B in quadrature (90° phase shifted)

Resolution option code P (μm) S (μm)
†
 T  40 10
D 20 5
†
Signal period P  G  8 2
X 4 1
Resolution S
Z 2 0.5
W 0.8 0.2
Y 0.4 0.1
H 0.2 0.05
A M 0.16 0.04
I 0.08 0.02
B O 0.04 0.01
Q 0.02 0.005
 R ‡ 0.01 0.0025
†  ‡ 
40 μm ATOM DX only 20 μm ATOM DX only

Reference*

Z Synchronised pulse Z, duration as resolution

Bi-directionally repeatable
*Inverse signals not shown for clarity

Alarm
Line driven (Asynchronous pulse)
(Not available with ‘A’ cable termination)

>15 ms

E− Alarm asserted when:

– Signal amplitude < 20% or >135%
– Readhead speed too high for reliable operation

or 3-state alarm
Differentially transmitted signals forced open circuit for >15 ms when alarm conditions valid.

10
Data sheet
ATOM DX encoder system

ATOM DX 20 µm part numbers A2 A 0 X 10 D 50 B

Series
A2 - 20 µm ATOM DX

Variant
A - Cabled
L - Top exit (‘00’ cable length and ‘Z’ cable termination only)

Scale type
0 - RTLF tape scale
1 - RCLC glass scale
1 - RCDM ∅108 mm glass disc
2 - RCDM ∅ 50, 56 and 68 mm glass disc
3 - RCDM ∅ 36 mm glass disc
4 - RCDM ∅ 30 mm glass disc

Resolution
D - 5 µm
X - 1 µm
Z - 0.5 µm
W - 0.2 µm
Y - 0.1 µm
H - 50 nm
M - 40 nm
I - 20 nm
O - 10 nm
Q - 5 nm
R - 2.5 nm

Cable length
00 - no cable (‘L’ variant and ‘Z’ cable termination only)
02 - 0.2 m
05 - 0.5 m
10 - 1 m
15 - 1.5 m
20 - 2.0 m
30 - 3.0 m

Cable termination
A - 9 way D-type
D - 15 way D-type (standard pin out)
H - 15 way D-type (alternative pin out)
K - 10 way JST
Z - 10 way JST readhead connector (‘L’ variant and ‘00’ cable length only)

Clocked frequency
50 - 50 MHz
40 - 40 MHz
25 - 25 MHz
20 - 20 MHz
12 - 12 MHz
10 - 10 MHz
08 - 8 MHz
06 - 6 MHz
04 - 4 MHz
01 - 1 MHz

Reference mark and alarm format options

B - Line driven alarm (Not available with ‘A’ Cable termination)
F - 3-state alarm

11
Data sheet
ATOM DX encoder system

ATOM DX 40 µm part numbers A4 A 0 X 10 D 50 B

Series
A4 - 40 µm ATOM DX

Variant
A - Cabled
L - Top exit (‘00’ cable length and ‘Z’ cable termination only)

Scale type
0 - RTLF tape scale
1 - RCLC glass scale
1 - RCDM ∅ >30 mm glass disc
2 - RCDM ∅ 25, 27 and 30 mm glass disc
3 - RCDM ∅ 20 mm glass disc
4 - RCDM ∅ <20 mm glass disc

Resolution
T - 10 µm
D - 5 µm
G - 2 µm
X - 1 µm
Z - 0.5 µm
W - 0.2 µm
Y - 0.1 µm
H - 50 nm
M - 40 nm
I - 20 nm
O - 10 nm
Q - 5 nm

Cable length
00 - No cable (‘L’ variant and ‘Z’ cable termination only)
02 - 0.2 m
05 - 0.5 m
10 - 1 m
15 - 1.5 m
20 - 2.0 m
30 - 3.0 m

Cable termination
A - 9 way D-type
D - 15 way D-type (standard pin out)
H - 15 way D-type (alternative pin out)
K - 10 way JST
Z - 10 way JST readhead connector (‘L’ variant and ‘00’ cable length only)

Clocked frequency
50 - 50 MHz
40 - 40 MHz
25 - 25 MHz
20 - 20 MHz
12 - 12 MHz
10 - 10 MHz
08 - 8 MHz
06 - 6 MHz
04 - 4 MHz
01 - 1 MHz

Reference mark and alarm format options

B - Line driven alarm (not available with ‘A’ Cable termination)
F - 3-state alarm

12
Data sheet
ATOM DX encoder system

RTLF tape scale

ATOM DX
Part number
Scale type Scale pitch Length Increments readhead
(where xxxx is the length in cm)*
scale type
10 mm to 90 mm 10 mm
RTLF20-S 20 µm A-9406-xxxx 0
100 mm to 10 m† 50 mm

40 µm 10 mm to 90 mm 10 mm
RTLF40H-S A-9408-xxxx 0
(high accuracy) 100 mm to 10 m †
50 mm
10 mm to 90 mm 10 mm
RTLF40-S 40 µm A-9407-xxxx 0
100 mm to 10 m† 50 mm
*Ordering A-9408-0070 for example will result in a length of 70 cm
† 
Lengths greater than 10 m available on request.

RCLC glass scale

ATOM DX readhead
Length (mm) 20 µm 40 µm
scale type
10 A-9404-2010 N/A 1
18 A-9404-2018 A-9404-4018 1
30 A-9404-2030 A-9404-4030 1
55 A-9404-2055 A-9404-4055 1
80 A-9404-2080 A-9404-4080 1
100 A-9404-2100 A-9404-4100 1
105 A-9404-2105 A-9404-4105 1
130 A-9404-2130 A-9404-4130 1

RCDM rotary discs (20 µm version) RCDM rotary discs (40 µm version)

ATOM DX ATOM DX
Diameter (mm) Part number readhead Diameter (mm) Part number readhead
scale type scale type
30 A-9405-2030 4 17 A-9405-4017 4

36 A-9405-2036 3 20 A-9405-4020 3
25 A-9405-4025 2
50 A-9405-2050 2
27 A-9405-4027 2
56 A-9405-2056 2
30 A-9405-4030 2
68 A-9405-2068 2
36 A-9405-4036 1
108 A-9405-2108 1
50 A-9405-4050 1
56 A-9405-4056 1
NOTE: Other disc diameters available, contact your
local Renishaw representative for more information. 68 A-9405-4068 1
108 A-9405-4108 1

Top exit readhead cables

15 way D-type connector 10 way JST
Cable length (m) Part number Cable length (m) Part number

0.5 A-9414-1223 0.5 A-9414-1233

1.0 A-9414-1225 1.0 A-9414-1235

1.5 A-9414-1226 1.5 A-9414-1236

3.0 A-9414-1228 3.0 A-9414-1238

13
Renishaw plc T +44 (0) 1453 524524
New Mills, Wotton-under-Edge F +44 (0) 1453 524901
Gloucestershire, GL12 8JR E [email protected]
United Kingdom www.renishaw.com

ATOM DX compatible products:

RTLF tape scale

RCLC glass scale

RCDM glass disc

Optional Advanced
Diagnostic Tool ADTi-100
(A-6195-0100)

For worldwide contact details, please visit our main website at www.renishaw.com/contact

RENISHAW HAS MADE CONSIDERABLE EFFORTS TO ENSURE THE CONTENT OF THIS DOCUMENT IS CORRECT AT THE DATE

*L-9517-9736-02*
OF PUBLICATION BUT MAKES NO WARRANTIES OR REPRESENTATIONS REGARDING THE CONTENT. RENISHAW EXCLUDES LIABILITY,
HOWSOEVER ARISING, FOR ANY INACCURACIES IN THIS DOCUMENT.

© 2017-2019 Renishaw plc. All rights reserved.

Renishaw reserves the right to change specifications without notice.
RENISHAW and the probe symbol used in the RENISHAW logo are registered trade marks of Renishaw plc in the United Kingdom and other countries.
apply innovation and names and designations of other Renishaw products and technologies are trade marks of Renishaw plc or its subsidiaries. Part no.: L-9517-9736-02-C
All other brand names and product names used in this document are trade names, trade marks or registered trade marks of their respective owners. Issued: 07.2019