Datasheet

CloudEngine S5736-S Series Multi-GE

Switches
CloudEngine S5736-S series switches are standard Multi-GE access switches that provide
24-port model, and provide four 10GE SFP+ uplink ports and one extended slot.

Introduction
CloudEngine S5736-S series Switches are standard Multi-GE access switches developed by Huawei for the Wi-Fi 6 era. The
CloudEngine S5736-S builds on Huawei's unified Versatile Routing Platform (VRP) and boasts various IDN features. This series
switches support simplified operations and maintenance (O&M), flexible Ethernet networking, enhanced Layer 3 features and
mature IPv6 features.It can also provide flexible port access rates and powerful PoE power supply capabilities, making it to be a
good choice for WLAN APs in the high-quality campus networks. With these merits, the CloudEngine S5736-S can be used as
an access or aggregation switch on a campus network or as an access switch for Metropolitan Area Network.

Product Overview
Models and Appearances
The following models are available in the CloudEngine S5736-S series.

Models and Appearances Description

 24 × 100M/1G/2.5G/5G/10G Base-T Ethernet ports, 4 x 10GE SFP+ ports
 One extended slot
 PoE++
CloudEngine S5736-S24UM4XC
 1+1 power backup
 Forwarding performance: 480 Mpps
 Switching capacity*: 880 Gbps/2.72 Tbps
Note: All ports support GE by default. You can purchase right-to-use (RTU)
licenses to upgrade the port rate (every 12 ports per RTU license) from GE to
2.5GE, 5GE, or 10GE.

Note：The value before the slash (/) refers to the device's switching capability, while the value after the slash (/) means the
system's switching capability.

Subcards
The following table lists the subcards applicable to the CloudEngine S5736-S.

Technical specifications of the subcards applicable to the CloudEngine S5736-S series

Subcards Technical Specifications Applied Switch Model

CloudEngine S5736-S Series Multi-GE Switches 1

 Subcards Technical Specifications Applied Switch Model
 4*40GE QSFP+ CloudEngine S5736-S24UM4XC
 Operating temperature: 0°C to 45°C (32°F to
113°F)
 Relative humidity: 5% RH to 95% RH
ES5D21Q04Q01  Storage temperature: -40°C to +70°C (-40°F to
+158°F)

 8*10GE SFP+ or 2*25GE SFP28

 Operating temperature: 0°C to 45°C (32°F to
113°F)
 Relative humidity: 5% to 95%
 Storage temperature: -40°C to +70°C (-40°F to
+158°F)
S7X08000
Note: The 8*10GE SFP+ subcard works as
8*10GE SFP+ by default, and can be changed to
2*25GE SFP28 as required.

Fan Models
The following table lists the fan module applicable to the CloudEngine S5736-S.

Technical specifications of the fan module applicable to the CloudEngine S5736-S series

Fan Module Technical Specifications Applied Switch Model

 Dimensions (W x D x H): 40 mm x 100.3 mm x 40  CloudEngine S5736-
mm S24UM4XC
 Number of fans: 1
 Weight: 0.1 kg
 Maximum power consumption: 7.2 W
 Maximum fan speed: 18500±10% revolutions per
FAN-023A-B minute (RPM)
 Maximum wind rate: 23 cubic feet per minute
(CFM)
 Hot swap: Supported

Power Supply
The following table lists the power supplies applicable to the CloudEngine S5736-S.

Technical specifications of the power supplies applicable to the CloudEngine S5736-S series

Power Module Technical Specifications Applied Switch Model

 Dimensions (H x W x D): 40 mm x 90 mm x 215  CloudEngine S5736-
mm (1.6 in. x 3.5 in. x 8.5 in.) S24UM4XC
 Weight: 1.1 kg (2.43 lb)
 Rated input voltage range:
− 100 V AC to 130 V AC, 50/60 Hz
PAC1000S56-DB
− 200 V AC to 240 V AC, 50/60 Hz
− 240 V DC
 Maximum input voltage range:
− 90 V AC to 290 V AC, 45 Hz to 65 Hz

CloudEngine S5736-S Series Multi-GE Switches 2

 Power Module Technical Specifications Applied Switch Model
− 190 V DC to 290 V DC
 Input current:
− 100 V AC to 130 V AC: 12 A
− 200 V AC to 240 V AC: 8 A
− 240 V DC: 8 A
 Maximum output current:
− 100 V AC to 130 V AC input: 16.08 A
− 200 V AC to 240 V AC input and 240 V DC
input: 17.86 A
 Maximum output power:
− Total power: 900 W (100 V AC to 130 V AC
input)/1000 W (200 V AC to 240 V AC input and
240 V DC input)
 Hot swap: Supported

CloudEngine S5736-S series Multi-GE switches support PoE. They have two power module slots, each of which can have a
1000 W PoE power module installed.

The following table lists its power supply configurations.

Power supply configurations of CloudEngine S5736-S

Model Power Module 1 Power Module 2 Available PoE Maximum Number of Ports
Power (Fully Loaded)

S5736- 1000 W (220 V) – 841 W  802.3af (15.4 W per port): 24

S24UM4XC  802.3at (30 W per port): 24
 802.3bt (60 W per port): 14
 802.3bt (90 W per port): 9

1000 W (110 V) – 746 W  802.3af (15.4 W per port): 24

 802.3at (30 W per port): 24
 802.3bt (60 W per port): 12
 802.3bt (90 W per port): 8

1000 W (220 V) 1000 W (220 V) 1791 W  802.3af (15.4 W per port): 24

 802.3at (30 W per port): 24
 802.3bt (60 W per port): 24
 802.3bt (90 W per port): 19

1000 W (110 V) 1000 W (110 V) 1601 W  802.3af (15.4 W per port): 24

 802.3at (30 W per port): 24
 802.3bt (60 W per port): 24
 802.3bt (90 W per port): 17

Product Features and Highlights

High-density Multi-GE Access Interface
 The uplink bandwidth of WLAN APs has been increased from 2.5 Gbit/s in 802.11ac to 5 Gbit/s or 10 Gbit/s. Traditional
gigabit access or Multi-gigabit bundled access cannot meet the uplink bandwidth requirements of APs. With the launch of the
CloudEngine S5736-S series Multi-GE switches, the ports support 100M/1/2.5/5/10G auto-sensing, meeting the bandwidth

CloudEngine S5736-S Series Multi-GE Switches 3

requirements of high-speed wireless APs in the Wi-Fi 6 era. In addition, Multi-GE ports support up to 90 W PoE++, which
provides high-power power for powered devices (PDs) such as APs and surveillance cameras.
 The S5736-S series switches provide industry-leading Multi-GE port density, switching capacity, and packet forwarding rate.
A single switch supports a maximum of 24 100M/1G/2.5G/5G/10G Base-T auto-sensing ports and 10G optical uplink ports,
provides one extended slot to support 8*10GE or 4*40GE subcards, meets various device interconnection requirements and can
be seamlessly integrated into the existing network.

Flexible Ethernet Networking

 In addition to traditional Spanning Tree Protocol (STP), Rapid Spanning Tree Protocol (RSTP), and Multiple Spanning Tree
Protocol (MSTP), the CloudEngine S5736-S supports Huawei-developed Smart Ethernet Protection (SEP) technology and the
latest Ethernet Ring Protection Switching (ERPS) standard. SEP is a ring protection protocol specific to the Ethernet link layer,
and applies to various ring network topologies, such as open ring topology, closed ring topology, and cascading ring topology.
This protocol is reliable, easy to maintain, and implements fast protection switching within 50 ms. ERPS is defined in ITU-T
G.8032. It implements millisecond-level protection switching based on traditional Ethernet MAC and bridging functions.
 The CloudEngine S5736-S supports Smart Link and Virtual Router Redundancy Protocol (VRRP), which implement
backup of uplinks. One CloudEngine S5736-S switch can connect to multiple aggregation switches through multiple links,
significantly improving reliability of access devices.

Various Security Control Methods

 The CloudEngine S5736-S supports 802.1x authentication, MAC address authentication, Portal authentication, and hybrid
authentication, and can dynamically delivery user policies such as VLANs, QoS policies, and access control lists (ACL). It also
supports user management based on user groups.
 The CloudEngine S5736-S provides a series of mechanisms to defend against DoS and user-targeted attacks. DoS
attacks are targeted at switches and include SYN flood, Land, Smurf, and ICMP flood attacks. User-targeted attacks include
bogus DHCP server attacks, IP/MAC address spoofing, DHCP request flood, and change of the DHCP CHADDR value.
 The CloudEngine S5736-S sets up and maintains a DHCP snooping binding table, and discards the packets that do not
match the table entries. You can specify DHCP snooping trusted and untrusted ports to ensure that users connect only to the
authorized DHCP server.
 The CloudEngine S5736-S supports strict ARP learning, which prevents ARP spoofing attackers from exhausting ARP
entries.
 The CloudEngine S5736-S supports Media Access Control Security (MACsec) with the port of subcard (8*10GE SFP+
subcard) . It provides identity authentication, data encryption, integrity check, and replay protection to protect Ethernet frames
and prevent attack packets.

Mature IPv6 Features

 The CloudEngine S5736-S is developed based on the mature, stable VRP and supports IPv4/IPv6 dual stacks, IPv6
routing protocols (RIPng, OSPFv3, BGP4+, and IS-IS for IPv6). With these IPv6 features, the CloudEngine S5736-S can be
deployed on a pure IPv4 network, a pure IPv6 network, or a shared IPv4/IPv6 network, helping achieve IPv4-to-IPv6 transition.

Intelligent Stack (iStack)

 The CloudEngine S5736-S supports the iStack function that combines multiple switches into a logical switch. Member
switches in a stack implement redundancy backup to improve device reliability and use inter-device link aggregation to improve
link reliability. iStack provides high network scalability. You can increase a stack's ports, bandwidth, and processing capacity by
simply adding member switches. iStack also simplifies device configuration and management. After a stack is set up, up to nine
physical switches can be virtualized into one logical device. You can log in to any member switch in the stack to manage all the
member switches in the stack.

Intelligent O&M
 The CloudEngine S5736-S provides telemetry technology to collect device data in real time and send the data to Huawei
campus network analyzer CampusInsight. The CampusInsight analyzes network data based on the intelligent fault identification
algorithm, accurately displays the real-time network status, effectively demarcates and locates faults in a timely manner, and
identifies network problems that affect user experience, accurately guaranteeing user experience.
 The CloudEngine S5736-S supports a variety of intelligent O&M features for audio and video services, including the
enhanced Media Delivery Index (eMDI). With this eDMI function, the switch can function as a monitored node to periodically

CloudEngine S5736-S Series Multi-GE Switches 4

conduct statistics and report audio and video service indicators to the CampusInsight platform. In this way, the CampusInsight
platform can quickly demarcate audio and video service quality faults based on the results of multiple monitored nodes.

VXLAN Features
 VXLAN is used to construct a Unified Virtual Fabric (UVF). As such, multiple service networks or tenant networks can be
deployed on the same physical network, and service and tenant networks are isolated from each other. This capability truly
achieves 'one network for multiple purposes'. The resulting benefits include enabling data transmission of different services or
customers, reducing the network construction costs, and improving network resource utilization.
 The CloudEngine S5736-S series switches are hardware ready to support VXLAN and allow centralized and distributed
VXLAN gateway deployment modes. These switches also support the BGP EVPN protocol for dynamically establishing VXLAN
tunnels and can be configured using NETCONF/YANG.

PoE Function
CloudEngine S5736-S PoE models can support PoE++(up to 90W power supply), Meeting high-power power supply
requirements for Wi-Fi 6 APs, IP cameras, and Video phones.

 Perpetual PoE: When a PoE switch is abnormal Power-off or the software version is upgraded, the power supply to PDs is
not interrupted. This capability ensures that PDs are not powered off during the switch reboot.
 Fast PoE: PoE switches can supply power to PDs within seconds after they are powered on. This is different from
common switches that generally take 1 to 3 minutes to start to supply power to PDs. When a PoE switch reboots due to a power
failure, the PoE switch continues to supply power to the PDs immediately after being powered on without waiting until it finishes
reboot. This greatly shortens the power failure time of PDs.

Intelligent Upgrade
 Switches support the intelligent upgrade feature. Specifically, switches obtain the version upgrade path and download the
newest version for upgrade from the Huawei Online Upgrade Platform (HOUP). The entire upgrade process is highly automated
and achieves one-click upgrade. In addition, preloading the version is supported, which greatly shortens the upgrade time and
service interruption time.
 The intelligent upgrade feature greatly simplifies device upgrade operations and makes it possible for the customer to
upgrade the version independently. This greatly reduces the customer's maintenance costs. In addition, the upgrade policies on
the HOUP platform standardize the upgrade operations, which greatly reduces the risk of upgrade failures.

Cloud Management
 The Huawei cloud management platform allows users to configure, monitor, and inspect switches on the cloud, reducing
on-site deployment and O&M manpower costs and decreasing network OPEX. Huawei switches support both cloud
management and on-premise management modes. These two management modes can be flexibly switched as required to
achieve smooth evolution while maximizing return on investment (ROI).

Open Programmability System(OPS)

 Open Programmability System(OPS) is an open programmable system based on the Python language. IT administrators
can program the O&M functions of a switch through Python scripts to quickly innovate functions and implement intelligent O&M.

Licensing
IDN One Software
CloudEngine S5736-S supports both the traditional feature-based licensing mode and the latest Huawei IDN One Software (N1
mode for short) licensing mode. The N1 mode is ideal for deploying Huawei CloudCampus Solution in the on-premises scenario,
as it greatly enhances the customer experiences in purchasing and upgrading software services with simplicity.

Software Package Features in N1 Mode

Switch Functions N1 Basic N1 Foundation N1 Advanced

Software Software Package Software
Package

CloudEngine S5736-S Series Multi-GE Switches 5

 Switch Functions N1 Basic N1 Foundation N1 Advanced
Software Software Package Software
Package

Basic network functions: √ √ √

Layer 2 functions, IPv4, IPv6, SVF, and others
Note: For details, see the Service Features

Basic network automation based on the iMaster NCE- × √ √

Campus:
 Basic automation: Plug-and-play
 Basic monitoring: Application visualization
 NE management: Image and topology management
and discovery

Advanced network automation and intelligent O&M: × × √

User access authentication and CampusInsight basic
functions

RTU license
CloudEngine S5736-S series Multi-GE switches use the innovative RTU license design. The RTU license is used to flexibly
manage and control downlink Multi-GE ports (every 12 ports in a group).The switches can be configured and upgraded on
demand,when working with Wi-Fi 6 APs, aggregation switches, and core switches, they can quickly build a flexible campus
network to meet actual service requirements , enable customers' networks and services to grow together, and avoid excessive
investment

RTU license

RTU license decription CloudEngine S5736-S24UM4XC

1G to 2.5G Electronic RTU License, 12-port √

1G to 5G Electronic RTU License, 12-port √

1G to 10G Electronic RTU License, 12-port √

2.5G to 5G Electronic RTU License, 12-port √

2.5G to 10G Electronic RTU License, 12-port √

5G to 10G Electronic RTU License, 12-port √

Product Specifications
Functions and Features
Except for special instructions, the following features are supported by CloudEngine S5736-S with N1 basic software.

Function and feature metrics for the CloudEngine S5736-S series

Function and Feature Description CloudEngine S5736-S Series

Ethernet features Ethernet basics Full-duplex, half-duplex, and auto- Yes

negotiation

Rate auto-negotiation on an interface Yes

Flow control on an interface Yes

CloudEngine S5736-S Series Multi-GE Switches 6

 Function and Feature Description CloudEngine S5736-S Series

Jumbo frames Yes

Link aggregation Yes

Load balancing among links of a trunk Yes

Transparent transmission of Layer 2 Yes

protocol packets

Device Link Detection Protocol (DLDP) Yes

Link Layer Discovery Protocol (LLDP) Yes

Link Layer Discovery Protocol-Media Yes

Endpoint Discovery (LLDP-MED)

Interface isolation Yes

Broadcast traffic suppression on an Yes

interface

Multicast traffic suppression on an interface Yes

Unknown unicast traffic suppression on an Yes

interface

VLAN broadcast traffic suppression Yes

VLAN multicast traffic suppression Yes

VLAN unknown unicast traffic suppression Yes

VLAN VLAN specification 4094

VLANIF interface specification 1024

Access mode Yes

Trunk mode Yes

Hybrid mode Yes

QinQ mode Yes

Default VLAN Yes

VLAN assignment based on interfaces Yes

VLAN assignment based on protocols Yes

VLAN assignment based on IP subnets Yes

VLAN assignment based on MAC Yes

addresses

VLAN assignment based on MAC address Yes

+ IP address

VLAN assignment based on MAC address Yes

+ IP address + interface number

Adding double VLAN tags to packets Yes

based on interfaces

Super-VLAN Yes

Super-VLAN specification 256

CloudEngine S5736-S Series Multi-GE Switches 7

 Function and Feature Description CloudEngine S5736-S Series

Sub-VLAN Yes

Sub-VLAN specification 1K

VLAN mapping Yes

Selective QinQ Yes

MUX VLAN Yes

Voice VLAN Yes

Guest VLAN Yes

GVRP GARP Yes

GVRP Yes

VCMP VCMP Yes

MAC MAC address 32K

Automatic learning of MAC addresses Yes

Automatic aging of MAC addresses Yes

Static, dynamic, and blackhole MAC Yes

address entries

Interface-based MAC address learning Yes

limiting

Sticky MAC Yes

MAC address flapping detection Yes

Configuring MAC address learning Yes

priorities for interfaces

MAC address spoofing defense Yes

Port bridge Yes

ARP Static ARP Yes

Dynamic ARP Yes

ARP entry 20K

ARP aging detection Yes

Intra-VLAN proxy ARP Yes

Inter-VLAN proxy ARP Yes

Routed proxy ARP Yes

Multi-egress-interface ARP Yes

Ethernet loop MSTP STP Yes

protection
RSTP Yes

MSTP Yes

VBST Yes

BPDU protection Yes

CloudEngine S5736-S Series Multi-GE Switches 8

 Function and Feature Description CloudEngine S5736-S Series

Root protection Yes

Loop protection Yes

Defense against TC BPDU attacks Yes

Loopback Loop detection on an interface Yes

detection

SEP SEP Yes

Smart Link Smart Link Yes

Smart Link multi-instance Yes

Monitor Link Yes

RRPP RRPP Yes

Single RRPP ring Yes

Tangent RRPP ring Yes

Intersecting RRPP ring Yes

Hybrid networking of RRPP rings and other Yes

ring networks

ERPS G.8032 v1 Yes

G.8032 v2 Yes

ERPS semi-ring topology Yes

ERPS closed-ring topology Yes

IPv4/IPv6 IPv4 and unicast IPv4 static routing Yes

forwarding routing
VRF Yes

DHCP client Yes

DHCP server Yes

DHCP relay Yes

DHCP policy VLAN Yes

URPF check Yes

Routing policies Yes

IPv4 routes 8K

RIPv1 Yes

RIPv2 Yes

OSPF Yes

BGP Yes

MBGP Yes

IS-IS Yes

Policy-based routing (PBR) Yes

CloudEngine S5736-S Series Multi-GE Switches 9

 Function and Feature Description CloudEngine S5736-S Series

Multicast routing IGMPv1/v2/v3 Yes

features
PIM-DM Yes

PIM-SM Yes

MSDP Yes

IPv4 multicast routes 1.5K

IPv6 multicast routes 500

Multicast routing policies Yes

RPF Yes

IPv6 features IPv6 protocol stack Yes

ND Yes

ND entry 10K

ND snooping Yes

DHCPv6 snooping Yes

RIPng Yes

DHCPv6 server Yes

DHCPv6 relay Yes

OSPFv3 Yes

BGP4+ Yes

IS-IS for IPv6 Yes

IPv6 routes 4K

VRRP6 Yes

MLDv1/v2 Yes

PIM-DM for IPv6 Yes

PIM-SM for IPv6 Yes

IPv6 transition IPv6 manual tunneling Yes

technology

Layer 2 multicast - IGMPv1/v2/v3 snooping Yes

features
IGMP snooping proxy Yes

MLD snooping Yes

Multicast traffic suppression Yes

Inter-VLAN multicast replication Yes

VPN VPN MCE Yes

Ping based-on VPN Yes

Telnet based-on VPN Yes

Trace based-on VPN Yes

CloudEngine S5736-S Series Multi-GE Switches 10

 Function and Feature Description CloudEngine S5736-S Series

VPN-Instance(IPV4) 64

VPN-Instance(IPV6) 64

Interface per VPN 64

Device reliability BFD Single-hop BFD Yes

BFD for static routes Yes

BFD for OSPF Yes

BFD for IS-IS Yes

BFD for BGP Yes

BFD for PIM Yes

BFD for VRRP Yes

Stacking Service interface-based stacking Yes

Maximum number of stacked devices 9

Stack bandwidth (Bidirectional) 480Gbps(MAX)

VRRP VRRP standard protocol Yes

Ethernet OAM EFM (802.3ah) Automatic discovery of links Yes

Link fault detection Yes

Link troubleshooting Yes

Remote loopback Yes

CFM (802.1ag) Software-level CCM Yes

802.1ag MAC ping Yes

802.1ag MAC trace Yes

OAM association Association between 802.1ag and 802.3ah Yes

Y.1731 Unidirectional delay and jitter measurement Yes

Bidirectional delay and jitter measurement Yes

QoS features Traffic Traffic classification based on ACLs Yes

classification
Matching the simple domains of packets Yes

Traffic behavior Traffic filtering Yes

Traffic policing (CAR) Yes

Modifying the packet priorities Yes

Modifying the simple domains of packets Yes

Modifying the packet VLANs Yes

Traffic shaping Traffic shaping on an egress interface Yes

Traffic shaping on queues on an interface Yes

Congestion Weighted Random Early Detection Yes

avoidance (WRED) on queues

CloudEngine S5736-S Series Multi-GE Switches 11

 Function and Feature Description CloudEngine S5736-S Series

Tail drop Yes

Congestion Priority Queuing (PQ) Yes

management
Weighted Deficit Round Robin (WDRR) Yes

PQ+WDRR Yes

Weighted Round Robin (WRR) Yes

PQ+WRR Yes

ACL Packet filtering at Basic IPv4 ACL Yes

Layer 2 to Layer 4
Advanced IPv4 ACL Yes

Basic IPv6 ACL Yes

Advanced IPv6 ACL Yes

Layer 2 ACL Yes

User group ACL Yes

User-defined ACL Yes

Configuration and Login and Command line interface (CLI)-based Yes

maintenance configuration configuration
management
Console terminal service Yes

Telnet terminal service Yes

SSH v1.5 Yes

SSH v2.0 Yes

SNMP-based NMS for unified configuration Yes

Web page-based configuration and Yes

management

EasyDeploy (client) Yes

EasyDeploy (commander) Yes

SVF Yes

Cloud management Yes

OPS Yes

File system Directory and file management Yes

File upload and download Yes

Monitoring and Deception Yes

maintenance
ECA Yes

eMDI Yes

Hardware monitoring Yes

Log information output Yes

Alarm information output Yes

CloudEngine S5736-S Series Multi-GE Switches 12

 Function and Feature Description CloudEngine S5736-S Series

Debugging information output Yes

Port mirroring Yes

Flow mirroring Yes

Remote mirroring Yes

Energy saving Yes

Version upgrade Version upgrade Yes

Version rollback Yes

Security ARP security ARP packet rate limiting Yes

ARP anti-spoofing Yes

Association between ARP and STP Yes

ARP gateway anti-collision Yes

Dynamic ARP Inspection (DAI) Yes

Static ARP Inspection (SAI) Yes

Egress ARP Inspection (EAI) Yes

IP security ICMP attack defense Yes

IPSG for IPv4 Yes

IPSG user capacity 3000

IPSG for IPv6 Yes

IPSGv6 user capacity 1500

Local attack CPU attack defense Yes

defense

MFF MFF Yes

DHCP snooping DHCP snooping Yes

Option 82 function Yes

Dynamic rate limiting for DHCP packets Yes

Attack defense Defense against malformed packet attacks Yes

Defense against UDP flood attacks Yes

Defense against TCP SYN flood attacks Yes

Defense against ICMP flood attacks Yes

Defense against packet fragment attacks Yes

Local URPF Yes

User access and AAA Local authentication Yes

authentication
Local authorization Yes

RADIUS authentication Yes

RADIUS authorization Yes

CloudEngine S5736-S Series Multi-GE Switches 13

 Function and Feature Description CloudEngine S5736-S Series

RADIUS accounting Yes

HWTACACS authentication Yes

HWTACACS authorization Yes

HWTACACS accounting Yes

NAC 802.1X authentication Yes

MAC address authentication Yes

Portal authentication Yes

Hybrid authentication Yes

Policy association Functioning as the control device Yes

Network - Ping Yes

management
Tracert Yes

NQA Yes

NTP Yes

iPCA Yes

Smart Application Control (SAC) Yes

NetStream Yes

SNMP v1 Yes

SNMP v2c Yes

SNMP v3 Yes

HTTP Yes

HTTPS Yes

RMON Yes

RMON2 Yes

NETCONF/YANG Yes

VXLAN* - VXLAN Layer 2 gateway Yes

VXLAN Layer 3 gateway Yes

Centralized gateway Yes

Distributed gateway Yes

BGP-EVPN Yes

BGP-EVPN neighbor capacity Yes

Interoperability - VLAN-based Spanning Tree (VBST) Yes

Link-type Negotiation Protocol (LNP) Yes

VLAN Central Management Protocol Yes

(VCMP)

*Hardware ready

CloudEngine S5736-S Series Multi-GE Switches 14

This content is applicable only to regions outside mainland China. Huawei reserves the right to interpret this content.

Hardware Specifications
The following table lists the hardware specifications of the CloudEngine S5736-S.

Hardware specifications of CloudEngine S5736-S models

Item CloudEngine S5736-S24UM4XC

Physical Dimensions (H x W x D, mm) 43.6 x 442 x 420

specifications
Chassis height 1U

Chassis weight (including 9.7kg

packaging)

Fixed port Multi-GE port 24

10GE SFP+ port 4

Extended slot One extended slot, 2*25GE SFP28 or 8 x 10GE SFP+, 4 x 40GE
QSFP+ cards

Management port ETH port Supported

Console port (RJ45) Supported

USB port USB 2.0

CPU Frequency 1.2 GHz

Cores 4

Storage Memory (RAM) 2 GB

Flash memory 1 GB

Power supply Power supply type 1000 W PoE AC (pluggable)

system
Rated voltage range  AC input (1000 W AC PoE): 100 V AC to 240 V AC, 50/60 Hz
 High-voltage DC input (1000 W AC PoE): 240 V DC

Maximum voltage range  AC input (1000 W AC PoE): 90 V AC to 290 V AC, 45 Hz to

65 Hz
 High-voltage DC input (1000 W AC PoE): 190 V DC to 290 V
DC (meeting 240 V high-voltage DC certification)

Maximum power consumption  176 W (without PD&Card)

 1967 W (with PD, PD power consumption of 1791 W)

Power consumption in the case 117 W

of 30% traffic load1

Power consumption in the case 124 W

of 100% traffic load1

Minimum power consumption 71 W

Heat dissipation Heat dissipation mode Air-cooled heat dissipation and intelligent fan speed adjustment
system
Number of fan modules 2

Airflow Air flows in from the front side and exhausts from the rear panel.

Maximum heat dissipation of the POE：6711.60

CloudEngine S5736-S Series Multi-GE Switches 15

 Item CloudEngine S5736-S24UM4XC
device (BTU/hour) non PoE：600.53

Environment Long-term operating temperature  0-1800 m: -5°C to 45°C

parameters  1800-5000 m: The operating temperature decreases 1°C
every time the altitude increases 220 m.

Short-term operating -5℃ ～50℃

temperature

Storage temperature -40°C to +70°C

Relative humidity 5%–95% (non-condensing)

Operating altitude 5000 m

Noise under normal temperature 70.1 dB (A)

(sound power)

Noise under high temperature 82.6 dB (A)

(sound power)

Noise under normal temperature 58.1 dB (A)

(sound pressure)

Surge protection specification  ±6 kV in differential mode

(power port)  ±6 kV in common mode

Reliability MTBF (year)2 59.44

MTTR (hour) 2

Availability > 0.99999

Certification  EMC certification

 Safety certification
 Manufacturing certification
For details about certifications, see the section Safety and
Regulatory Compliance.

*Note: The 8*10GE SFP+ subcard works as 8*10GE SFP+ by default, and can be changed to 2*25GE SFP28 as required.

1: The power consumption under different load conditions is calculated according to the ATIS standard. Additionally, the EEE
function is enabled and there is no PoE power output.
2: The reliability parameter values are calculated based on the typical configuration of the device. The parameter values vary
according to the modules configured by the customer.

Networking and Applications

Large-Scale Enterprise Campus Network
CloudEngine S5736-S series switches can be deployed at the access layer of a campus network to build a high-performance
and highly reliable enterprise network.

CloudEngine S5736-S Series Multi-GE Switches 16

Small- or Medium-scale Enterprise Campus Network
CloudEngine S5736-S series switches can be deployed at the aggregation layer of a campus network to build a high-
performance, multi-service, and highly reliable enterprise network.

CloudEngine S5736-S Series Multi-GE Switches 17

Small-scale Enterprise Campus Network
With powerful aggregation and routing capabilities of CloudEngine S5736-S series switches make them suitable for use as
core switches in a small-scale enterprise network. Two or more S5736-S switches use iStack technology to ensure high
reliability. They provide a variety of access control policies to achieve centralized management and simplify configuration.

Application on a MAN
CloudEngine S5736-S series switches can be deployed at the access layer of a MAN(Metropolitan Area Network) to build a
high-performance, multi-service, and highly reliable ISP MAN network.

CloudEngine S5736-S Series Multi-GE Switches 18

Application in Public Cloud
CloudCampus Solution is a network solution suite based on Huawei public cloud. CloudEngine S5736-S series switches can
be located at the access layer.

The switches are plug-and-play. They go online automatically after being powered on and connected with network cables,
without the need for complex configurations. The switches can connect to the management and control system(iMaster NCE-
Campus for switches running V200R019C10 and later versions), and use bidirectional certificate authentication to ensure
management channel security. The switches provide the NETCONF and YANG interfaces, through which the management and
control system delivers configurations to them. In addition, remote maintenance and fault diagnosis can be performed on the
management and control system.

CloudEngine S5736-S Series Multi-GE Switches 19

Safety and Regulatory Compliance
The following table lists the safety and regulatory compliance of the CloudEngine S5736-S.

Safety and regulatory compliance of the CloudEngine S5736-S series

Certification Category Description

Safety  IEC 60950-1

 EN 60950-1/A11/A12
 UL 60950-1
 CSA C22.2 No 60950-1
 AS/NZS 60950.1
 CNS 14336-1
 IEC60825-1
 IEC60825-2

CloudEngine S5736-S Series Multi-GE Switches 20

 Certification Category Description
 EN60825-1
 EN60825-2

Electromagnetic Compatibility (EMC)  CISPR22 Class A

 CISPR24
 EN55022 Class A
 EN55024
 ETSI EN 300 386 Class A
 CFR 47 FCC Part 15 Class A
 ICES 003 Class A
 AS/NZS CISPR22 Class A
 VCCI Class A
 IEC61000-4-2
 ITU-T K 20
 ITU-T K 21
 ITU-T K 44
 CNS13438

Environment  RoHS
 REACH
 WEEE

 EMC: electromagnetic compatibility

 CISPR: International Special Committee on Radio Interference
 EN: European Standard
 ETSI: European Telecommunications Standards Institute
 CFR: Code of Federal Regulations
 FCC: Federal Communication Commission
 IEC: International Electrotechnical Commission
 AS/NZS: Australian/New Zealand Standard
 VCCI: Voluntary Control Council for Interference
 UL: Underwriters Laboratories
 CSA: Canadian Standards Association
 IEEE: Institute of Electrical and Electronics Engineers
 RoHS: restriction of the use of certain hazardous substances
 REACH: Registration Evaluation Authorization and Restriction of Chemicals
 WEEE: Waste Electrical and Electronic Equipment

MIB and Standards Compliance

Supported MIBs
The following table lists the MIBs supported by the CloudEngine S5736-S.

MIBs supported by the CloudEngine S5736-S series

Category MIB

Public MIB  BRIDGE-MIB

CloudEngine S5736-S Series Multi-GE Switches 21

 Category MIB
 DISMAN-NSLOOKUP-MIB
 DISMAN-PING-MIB
 DISMAN-TRACEROUTE-MIB
 ENTITY-MIB
 EtherLike-MIB
 IF-MIB
 IP-FORWARD-MIB
 IPv6-MIB
 LAG-MIB
 LLDP-EXT-DOT1-MIB
 LLDP-EXT-DOT3-MIB
 LLDP-MIB
 MPLS-FTN-STD-MIB
 MPLS-L3VPN-STD-MIB
 MPLS-LDP-GENERIC-STD-MIB
 MPLS-LDP-STD-MIB
 MPLS-LSR-STD-MIB
 MPLS-TE-STD-MIB
 NOTIFICATION-LOG-MIB
 NQA-MIB
 OSPF-TRAP-MIB
 P-BRIDGE-MIB
 Q-BRIDGE-MIB
 RFC1213-MIB
 RIPv2-MIB
 RMON2-MIB
 RMON-MIB
 SAVI-MIB
 SNMP-FRAMEWORK-MIB
 SNMP-MPD-MIB
 SNMP-NOTIFICATION-MIB
 SNMP-TARGET-MIB
 SNMP-USER-BASED-SM-MIB
 SNMPv2-MIB
 TCP-MIB
 UDP-MIB

Huawei-proprietary MIB  HUAWEI-AAA-MIB

 HUAWEI-ACL-MIB
 HUAWEI-ALARM-MIB
 HUAWEI-ALARM-RELIABILITY-MIB
 HUAWEI-BASE-TRAP-MIB
 HUAWEI-BRAS-RADIUS-MIB
 HUAWEI-BRAS-SRVCFG-EAP-MIB
 HUAWEI-BRAS-SRVCFG-STATICUSER-MIB

CloudEngine S5736-S Series Multi-GE Switches 22

 Category MIB
 HUAWEI-CBQOS-MIB
 HUAWEI-CDP-COMPLIANCE-MIB
 HUAWEI-CONFIG-MAN-MIB
 HUAWEI-CPU-MIB
 HUAWEI-DAD-TRAP-MIB
 HUAWEI-DC-MIB
 HUAWEI-DATASYNC-MIB
 HUAWEI-DEVICE-MIB
 HUAWEI-DHCPR-MIB
 HUAWEI-DHCPS-MIB
 HUAWEI-DHCP-SNOOPING-MIB
 HUAWEI-DIE-MIB
 HUAWEI-DNS-MIB
 HUAWEI-DLDP-MIB
 HUAWEI-ELMI-MIB
 HUAWEI-ERPS-MIB
 HUAWEI-ERRORDOWN-MIB
 HUAWEI-ENERGYMNGT-MIB
 HUAWEI-EASY-OPERATION-MIB
 HUAWEI-ENTITY-EXTENT-MIB
 HUAWEI-ENTITY-TRAP-MIB
 HUAWEI-ETHARP-MIB
 HUAWEI-ETHOAM-MIB
 HUAWEI-FLASH-MAN-MIB
 HUAWEI-FWD-RES-TRAP-MIB
 HUAWEI-GARP-APP-MIB
 HUAWEI-GTSM-MIB
 HUAWEI-HGMP-MIB
 HUAWEI-HWTACACS-MIB
 HUAWEI-IF-EXT-MIB
 HUAWEI-INFOCENTER-MIB
 HUAWEI-IPPOOL-MIB
 HUAWEI-IPV6-MIB
 HUAWEI-ISOLATE-MIB
 HUAWEI-L2IF-MIB
 HUAWEI-L2MAM-MIB
 HUAWEI-L2VLAN-MIB
 HUAWEI_LDT-MIB
 HUAWEI-LLDP-MIB
 HUAWEI-MAC-AUTHEN-MIB
 HUAWEI-MEMORY-MIB
 HUAWEI-MFF-MIB
 HUAWEI-MFLP-MIB
 HUAWEI-MSTP-MIB
 HUAWEI-BGP-VPN-MIB

CloudEngine S5736-S Series Multi-GE Switches 23

 Category MIB
 HUAWEI-CCC-MIB
 HUAWEI-MULTICAST-MIB
 HUAWEI-NAP-MIB
 HUAWEI-NTPV3-MIB
 HUAWEI-PERFORMANCE-MIB
 HUAWEI-PORT-MIB
 HUAWEI-PORTAL-MIB
 HUAWEI-QINQ-MIB
 HUAWEI-RIPv2-EXT-MIB
 HUAWEI-RM-EXT-MIB
 HUAWEI-RRPP-MIB
 HUAWEI-SECURITY-MIB
 HUAWEI-SEP-MIB
 HUAWEI-SNMP-EXT-MIB
 HUAWEI-SSH-MIB
 HUAWEI-STACK-MIB
 HUAWEI-SWITCH-L2MAM-EXT-MIB
 HUAWEI-SWITCH-SRV-TRAP-MIB
 HUAWEI-SYS-MAN-MIB
 HUAWEI-TCP-MIB
 HUAWEI-TFTPC-MIB
 HUAWEI-TRNG-MIB
 HUAWEI-XQOS-MIB

Standard Compliance
The following table lists the standards that the CloudEngine S5736-S complies with.

Standard compliance list of the CloudEngine S5736-S series

Standard Organization Standard or Protocol

IETF  RFC 768 User Datagram Protocol (UDP)

 RFC 792 Internet Control Message Protocol (ICMP)
 RFC 793 Transmission Control Protocol (TCP)
 RFC 826 Ethernet Address Resolution Protocol (ARP)
 RFC 854 Telnet Protocol Specification
 RFC 951 Bootstrap Protocol (BOOTP)
 RFC 959 File Transfer Protocol (FTP)
 RFC 1058 Routing Information Protocol (RIP)
 RFC 1112 Host extensions for IP multicasting
 RFC 1157 A Simple Network Management Protocol (SNMP)
 RFC 1256 ICMP Router Discovery
 RFC 1305 Network Time Protocol Version 3 (NTP)
 RFC 1349 Internet Protocol (IP)
 RFC 1493 Definitions of Managed Objects for Bridges
 RFC 1542 Clarifications and Extensions for the Bootstrap Protocol

CloudEngine S5736-S Series Multi-GE Switches 24

 Standard Organization Standard or Protocol
 RFC 1643 Ethernet Interface MIB
 RFC 1757 Remote Network Monitoring (RMON)
 RFC 1901 Introduction to Community-based SNMPv2
 RFC 1902-1907 SNMP v2
 RFC 1981 Path MTU Discovery for IP version 6
 RFC 2131 Dynamic Host Configuration Protocol (DHCP)
 RFC 2328 OSPF Version 2
 RFC 2453 RIP Version 2
 RFC 2460 Internet Protocol, Version 6 Specification (IPv6)
 RFC 2461 Neighbor Discovery for IP Version 6 (IPv6)
 RFC 2462 IPv6 Stateless Address Auto configuration
 RFC 2463 Internet Control Message Protocol for IPv6 (ICMPv6)
 RFC 2474 Differentiated Services Field (DS Field)
 RFC 2740 OSPF for IPv6 (OSPFv3)
 RFC 2863 The Interfaces Group MIB
 RFC 2597 Assured Forwarding PHB Group
 RFC 2598 An Expedited Forwarding PHB
 RFC 2571 SNMP Management Frameworks
 RFC 2865 Remote Authentication Dial In User Service (RADIUS)
 RFC 3046 DHCP Option82
 RFC 3376 Internet Group Management Protocol, Version 3 (IGMPv3)
 RFC 3513 IP Version 6 Addressing Architecture
 RFC 3579 RADIUS Support For EAP
 RFC 4271 A Border Gateway Protocol 4 (BGP-4)
 RFC 4760 Multiprotocol Extensions for BGP-4
 draft-grant-tacacs-02 TACACS+
 RFC 6241 Network Configuration Protocol (NETCONF)
 RFC 6020 YANG - A Data Modeling Language for the Network Configuration Protocol
(NETCONF)

IEEE  IEEE 802.1D Media Access Control (MAC) Bridges

 IEEE 802.1p Traffic Class Expediting and Dynamic Multicast Filtering
 IEEE 802.1Q Virtual Bridged Local Area Networks
 IEEE 802.1ad Provider Bridges
 IEEE 802.2 Logical Link Control
 IEEE Std 802.3 CSMA/CD
 IEEE Std 802.3ab 1000BASE-T specification
 IEEE Std 802.3ad Aggregation of Multiple Link Segments
 IEEE Std 802.3ae 10GE WEN/LAN Standard
 IEEE Std 802.3x Full Duplex and flow control
 IEEE Std 802.3z Gigabit Ethernet Standard
 IEEE802.1ax/IEEE802.3ad Link Aggregation
 IEEE 802.3ah Ethernet in the First Mile.
 IEEE 802.1ag Connectivity Fault Management
 IEEE 802.1ab Link Layer Discovery Protocol

CloudEngine S5736-S Series Multi-GE Switches 25

 Standard Organization Standard or Protocol
 IEEE 802.1D Spanning Tree Protocol
 IEEE 802.1w Rapid Spanning Tree Protocol
 IEEE 802.1s Multiple Spanning Tree Protocol
 IEEE 802.1x Port based network access control protocol

ITU  ITU SG13 Y.17ethoam

 ITU SG13 QoS control Ethernet-Based IP Access
 ITU-T Y.1731 ETH OAM performance monitor

ISO  ISO 10589 IS-IS Routing Protocol

MEF  MEF 2 Requirements and Framework for Ethernet Service Protection

 MEF 9 Abstract Test Suite for Ethernet Services at the UNI
 MEF 10.2 Ethernet Services Attributes Phase 2
 MEF 11 UNI Requirements and Framework
 MEF 13 UNI Type 1 Implementation Agreement
 MEF 15 Requirements for Management of Metro Ethernet Phase 1 Network Elements
 MEF 17 Service OAM Framework and Requirements
 MEF 20 UNI Type 2 Implementation Agreement
 MEF 23 Class of Service Phase 1 Implementation Agreement
 Xmodem XMODEM/YMODEM Protocol Reference

Ordering Information
The following table lists ordering information of the CloudEngine S5736-S series switches.

Model Product Description

CloudEngine S5736- S5736-S24UM4XC Base(24*100M/1G Ethernet ports,Optional RTU upgrade to 2.5/5/10G,

S24UM4XC 4*10GE SFP+ ports, 1*expansion slot, PoE++, without power module)

CloudEngine S5736- S5736-S24UM4XC 2.5&10G Bundle(12*100M/1G/2.5G Ethernet ports,

S24UMXC 12*100M/1G/2.5G/5G/10G Ethernet ports, Optional RTU upgrade to 5/10G, 4*10GE SFP+
ports, 1*expansion slot, PoE++, 1*1000W AC power)

CloudEngine S5736- S5736-S24UM4XC 10G Bundle(24*100M/1G/2.5G/5G/10G Ethernet ports, 4*10GE SFP+

S24UMXC ports, 1*expansion slot, PoE++, 1*1000W AC power)

PAC1000S56-DB 1000W AC PoE power module

S7X08000 2-port 25GE SFP28 or 8-port 10GE SFP+ interface card

ES5D21Q04Q01 4-port 40GE QSFP+ interface card

FAN-023A-B Fan module

L-1GUPG2.5G-S57S S57-S series, 1G to 2.5G Electronic RTU License, 12-port

L-1GUPG5G-S57S S57-S series, 1G to 5G Electronic RTU License, 12-port

L-1GUPG10G-S57S S57-S series, 1G to 10G Electronic RTU License, 12-port

L-2.5GUPG5G-S57S S57-S series, 2.5G to 5G Electronic RTU License, 12-port

L-2.5GUPG10G-S57S S57-S series, 2.5G to 10G Electronic RTU License, 12-port

L-5GUPG10G-S57S S57-S series, 5G to 10G Electronic RTU License, 12-port

CloudEngine S5736-S Series Multi-GE Switches 26

 Model Product Description

N1-S57S-M-Lic S57XX-S Series Basic SW,Per Device

N1-S57S-M-SnS1Y S57XX-S Series Basic SW,SnS,Per Device,1Year

N1-S57S-F-Lic N1-CloudCampus,Foundation,S57XX-S Series,Per Device

N1-S57S-F-SnS1Y N1-CloudCampus,Foundation,S57XX-S Series,SnS,Per Device,1Year

N1-S57S-A-Lic N1-CloudCampus,Advanced,S57XX-S Series,Per Device

N1-S57S-A-SnS1Y N1-CloudCampus,Advanced,S57XX-S Series,SnS,Per Device,1Year

N1-S57S-FToA-Lic N1-Upgrade-Foundation to Advanced,S57XX-S,Per Device

N1-S57S-FToA-SnS1Y N1-Upgrade-Foundation to Advanced,S57XX-S,SnS,Per Device,1Year

More Information
For more information about Huawei Campus Switches, visit http://e.huawei.com or contact us in the following ways:

 Global service hotline: http://e.huawei.com/en/service-hotline

 Logging in to the Huawei Enterprise technical support website: http://support.huawei.com/enterprise/
 Sending an email to the customer service mailbox: [email protected]

Copyright © Huawei Technologies Co., Ltd. 2021. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means without prior written
consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and
Huawei Technologies Co., Ltd.
recommendations in this document are provided "AS IS" without warranties, guarantees or representations of
any kind, either express or implied. Address:Huawei Industrial Base Bantian,
Longgang Shenzhen 518129 People's
The information in this document is subject to change without notice. Every effort has been made in the
Republic of China
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied. Website:e.huawei.com

CloudEngine S5736-S Series Multi-GE Switches 27