TEST I.
Multiple Choice
Direction: Choose the correct answer and write it in the space provided.
____1. It includes a wide variety of non- powered devices such as wrenches, pliers,
hammers, and screwdrivers.
A. ESD Tools B. Hand Tools C. Cleaning Tools D. Diagnostic Tools
____2. It is used to clean the RAM.
A. Towel B. Cloth C. Isopropyl alcohol and lint free swabs
D. All of the above
____3. What are the two most common hazards associated with the use of hand tools?
A. Misuse and improvement maintenance B. Misuse and improper
maintenance
C. Correct use and incorrect placement D. Misuse and improper washing
____4. The use of _____ may also be appropriate to provide protection against cuts,
abrasion, and repeated impact.
A. hand protection B. eye protection C. body protection D. All of the
above
____5. It is clothing and equipment worn by employees, students, contractors or visitors
to protect or shield their bodies from workplace hazards.
A. Professional Personal Equipment B. Protective Practical Equipment
C. Personal Protective Equipment D. Properly Protected Equipment
____6. All the following are safety requirements in using hand tools EXCEPT.
A. Follow all cautions, warnings, and instructions marked on the equipment.
B. Use sparking tools in the presence of flammable vapors and dust.
C. Ensure that the voltage and frequency rating of the power outlet matches the
electrical rating labels on the system.
____7. Unplug the _____ from the EC wall socket before working on the power supply.
A. wrist strap B. cover system C. printed circuit board D. AC power cord
electric
____8. To ensure that tools and equipment remain in good condition and last for a long
time, ____ must be observed.
A. improper storage B. proper storage C. unclean storage D. None of the
above
____9. Wear a _____ when handling printed.
A. wrist strap B. AC power cord C. printed circuit board D. cover system
____10. Do not increase the handle length of ____ to gain more leverage.
A. screwdriver B. pliers C. utility knives/blades D. wrenches
TEST II. TRUE/ FALSE
Direction: Read each statement carefully. Write TRUE if the statement is correct, and
FALSE if it is not.
______1. Use flammable cleaners or water on electrical equipment.
______2. Skilled use of tools and software makes the job more difficult and ensures that
tasks are performed properly and safely.
______3. Use pliers as a substitute for a wrench when turning bolts and nuts.
______4. Proper maintenance allows hand tools to deteriorate into an unsafe condition.
______5. Misuse occurs when a hand tool is used for something other than its intended
purpose.
______6. Frequently used items should not be put in accessible locations.
______7. Areas of storing equipment should not be clean, dry, and not overcrowded.
______8. Whenever you perform a task in the workshop, you must not use personal
protective equipment to prevent injury or danger.
______9. Do not clean the tools after using.
______10. Store knives properly with sharp edge down when not in use.
TEST III. NAME THE TOOLS
Direction: Name the tool presented by each number. Choose the correct answers from
the box below. Write your answers in the space provided before each tool
Antistatic wrist strap Screwdrivers Utility knives/blades
Bins Pliers Printed circuit board AC power cord electric
1. _________________________ 2. _________________________
3. _____________________ 4. __________________________
5. ____________________ 6. __________________
7. _________________
TEST IV. ESSAY (5 POINTS)
Why is it important to store the tools properly?
