Scribd
Upload
62 views1 page

Datasheet AP B175N 65C 43

This document provides specifications for a diaphragm dosing pump. The pump is model AP B175N-65/C-43, has a maximum capacity of 333 liters/hour at 50Hz and 400 liters/hour at 60Hz. It has a maximum pressure of 7.8 bar and is designed to dose chemicals with a maximum temperature of 40°C and viscosity of N.A. cps. The pump wetted parts are constructed of materials including PVC, PTFE coated diaphragm, PYREX ball valve, and FPM o-rings. It is powered by a 0.37KW, 400V, 60Hz, 3-phase electric motor and has an IP

Uploaded by

Dennis Koay Soon Ngai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
62 views1 page

Datasheet AP B175N 65C 43

This document provides specifications for a diaphragm dosing pump. The pump is model AP B175N-65/C-43, has a maximum capacity of 333 liters/hour at 50Hz and 400 liters/hour at 60Hz. It has a maximum pressure of 7.8 bar and is designed to dose chemicals with a maximum temperature of 40°C and viscosity of N.A. cps. The pump wetted parts are constructed of materials including PVC, PTFE coated diaphragm, PYREX ball valve, and FPM o-rings. It is powered by a 0.37KW, 400V, 60Hz, 3-phase electric motor and has an IP

Uploaded by

Dennis Koay Soon Ngai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Address: Via G.

Carducci, 141 - 20093 (MI) - IT


Tel. +39 02.27301324 DATE: 10/03/2023
e-mail: [email protected]

PROCESS INFORMATION
Chemical to dose: N.A. Req. Capacity (Lt/h): 399.60
Max Chem. Temp (°C): 40 Working Pressure (Barg): 7.80
Max Viscosity (Cps): N.A. Suction Pressure (Barg): N.A.
Ambient Temperature: (-20 / +40) °C ∆P (Barg): 7.80

PUMP CONFIGURATION
Model: AP B175N-65/C-43 Mechanism Type: SPRING RETURN
333 @50Hz Pump Type: Hydraulic Diaphragm
Max Capacity (Lt/h):
400 @60Hz 96 @50Hz
Stroke per minutes:
7.80 Metal 116 @60Hz
Max Pressure (Barg):
7.80 Plastic Stroke length (mm): 17.50
Adjustment: Manual 0 - 100% of stroke length Connection: 3/4'' BSPPm
Diaphragm Ø (mm): 120 Valve Type: Single ball
Plunger Ø (mm): 65 Pump Area: SAFE AREA

PUMP WETTED PARTS MATERIAL


PUMP HEAD DIAPHRAGM BALL VALVE* PLUNGER PLUNGER GASKET VALVE O-RING * for pump with valve size
1 INCHES - ball valve is
PVC PTFE coated PYREX N.A. N.A. FPM in PTFE

ELECTRIC MOTOR (construction shape B14)


Power Supply: 3PH - TRI-PHASE 4 POLES Installed Power: 0,37KW
Area: SAFE AREA Voltage: 400.00
Protection: IP55 Frequency: 60 HZ
Insulation Class: F Inverter Use: NO

THEORETICAL CURVES

Important Note: Value indicate in pump data sheet and in performance curves are abtained during test with water al 20°C and with perfect pump installation. Mentioned data can change without any
previous advice. DOSEURO take no responsability for selection without previous consult of our sales department.All the information mentioned in the present documents are DOSEURO property,
can not be shared without previous agreement with DOSEURO headquarter.

You might also like