REPLACEMENT PARTS GUIDE
759JH Tracked Feller Buncher/Harvester (Leveling)(PIN: —1T0759JH_ _C220452)
ENGINE AIR FILTER ELEMENT - PRIMARY
HYDRAULIC OIL RETURN FILTER
AT175223
F061786 1
10
Interval (hrs) - As Required
Interval (hrs) - 2000.
ENGINE AIR FILTER ELEMENT - SECONDARY
ENGINE ROCKER ARM COVER GASKET AT175224
11
R502598 - UPPER 2
Interval (hrs) - As Required.
Interval (hrs) - 2000.
PRIMARY FUEL FILTER ELEMENT
ENGINE ROCKER ARM COVER GASKET 12 RE531703
R502719 - LOWER 3 Interval (hrs) - 500
Interval (hrs) - 2000
FINAL FUEL FILTER ELEMENT
FINAL FUEL FILTER ELEMENT 13 RE522688
R502777 4
Interval (hrs) - 500.
10
Interval (hrs) - 500. 1 11
2
3 12
4 13 CAB FRESH AIR FILTER
PRIMARY FUEL FILTER ELEMENT 5
6
7 700093800
RE522372 8
14 14
Interval (hrs) - As Required.
5 16
9
Interval (hrs) - 500. 17
15
FINAL FUEL FILTER PRE-SCREEN ELEMENT CAB RECIRCULATING AIR FILTER
R502778
15 F436088
6
Interval (hrs) - 500. Interval (hrs) - As Required.
ENGINE CRANKSHAFT DAMPENER
ENGINE OIL FILTER
RE500917 - ENGINE 6081HTJ08
RE509672 7
16
Interval (hrs) - 4000.
Interval (hrs) - 500.
ENGINE CRANKSHAFT DAMPENER KEY
HYDRAULIC BREATHER FILTER
R523306
F122930 8
17
Interval (hrs) - 4000.
Interval (hrs) - 2000.
ENGINE CRANKSHAFT DAMPENER
RE48454 - ENGINE 6081HTJ07 9
Interval (hrs) - 4000.
CLICK PART NUMBER TO BUY
Apr.2022. Release Date. *See operator’s manual for additional details.
OILS AND CAPACITIES INFORMATION
759JH Tracked Feller Buncher/Harvester (Leveling)(PIN: —1T0759JH_ _C220452)
Part Description Part Number Qty or capacity Change Interval In Hours
John Deere Plus-50™ II Engine Oil TY266743 28.0 L (7.4 gal) 500
API GL-5 Gear Oil TY263723 9.6 L (2.5 gal) 500
Hy-Gard™ Pump Drive Gear Case Oil TY63543 6.6 L (1.8 gal) 1000
Enclosure Door Pump Oil DEXRON™ III ATF TY26459 1.6 L (1.7 gt.) 2000
John Deere PLUS-50™ II Hydraulic Oil TY266713 136.0 L (36.0 gal) 2000
COOL-GARD™ II Pre-Mix TY26575 36.0 L (9.5 gal) 6000
Coolant Extender TY26603 As Required As Required
Fluid Analysis Kits4
Diesel Engine Oil AT346594 1 250
Hydraulic Oil AT346594 1 500
Track Drive Planetary Oil AT346594 2 500
Swing Drive Gear Case Oil AT346594 1 500
Pump Drive Gear Case Oil AT346594 1 500
Diesel Fuel AT180344 1 500
Engine Coolant TY27787 1 500
COOL-GARD™ II Test Strips TY26605 1 1000
³ See operator’s manual for recommended oil type and oil viscosities based on operating temperatures.
⁴ Based on fluid analysis results, intervals may need to be adjusted for your operating conditions. Consult your local John Deere dealer.
Plus-50 is a trademark of Deere & Company
Hydrau is a trademark of Deere & Company
Hy-Gard is a trademark of Deere & Company
Cool-Gard is a trademark of Deere & Company
CLICK PART NUMBER TO BUY
Apr.2022. Release Date. *See operator’s manual for additional details.
753JH (PIN: —1T0753JH_ _C220452) 753J (PIN: —1T0753JX_ _C220452)
703JH (PIN: —1T0703JH_ _C220452)
Service Intervals
As Required
• Inspect serpentine belt • Check and clean cab fresh air and cab recirculation air filters
• Inspect undercarriage frame joints • Add coolant extender as indicated by COOL-GARD™ II test strips
• Replace engine air cleaner elements (replace secondary element every third primary element cleaning or change)
Every 10 Hours or Daily
• Lubricate hoist (boom) joints and cylinder ends • Check pump drive gear case oil level
• Check and clean radiator pre-screen • Check swing drive gear case oil level
• Check engine coolant level • Check hydraulic oil level
• Check and clean cooling system and condenser fins • Check fire extinguisher gauge
1
• Fire suppression system—if equipped • Check and adjust track sag
• Check engine oil level • Lubricate swing pinion and bearing
• Check and drain fuel/water separator • Lubricate leveler pivot joints (759J/JH)
Every 100 Hours
• Check track drive planetary oil level • Check engine rpm
• Lubricate door hinges • Check oil level in idler assembly
• Lubricate secondary exit latches and knobs • Lubricate swing gear case bearing
• Check skylight latch tension • Lubricate rotary manifold (759J/JH)
Initial Service - 250 Hours 2
• Drain and refill engine break-in oil and replace filter • Check hydraulic pressures
• Drain and refill pump drive gear case oil • Check swing bearing cap screw torque
• Drain and refill swing gear case oil • Check lower roller mounting cap screw torque
• Drain and refill track drive planetary oil • Check track shoe cap screw torque
4
• Check planetary and sprocket mounting cap screw torque 2
Every 250 Hours
• Take engine oil sample
Every 500 Hours
• Drain and refill engine oil and replace filter • Take hydraulic oil sample
• Drain and refill track drive planetary oil • Take engine coolant sample
• Check battery electrolyte level • Take pump drive gear case oil sample
• Check enclosure door pump oil level • Take swing gear case oil sample
• Clean or replace fuel strainer screen • Take track drive planetary oil sample
• Replace engine fuel filters • Take diesel fuel sample
Every 1000 Hours
• Drain and refill pump drive gear case oil • Check coolant
• Drain and refill swing gear case oil
Every 2000 Hours
• Check and adjust engine valve clearance • Replace hydraulic oil return filters
• Drain and refill enclosure door pump oil • Replace hydraulic breather filter
• Drain and refill hydraulic oil
Every 4000 Hours
• Replace engine crankshaft dampener
Every 6000 Hours
• Drain and refill engine cooling system
T231009 27AUG13
Apr.2022. Release Date.
T231013-63 | T231019-59 | T231016-28 | T231024-54 *See operator’s manual for additional details.
