FIRESTOP

AND FIRE
PROTECTION
SYSTEMS

Hilti online: www.hilti.com.hk

340
 FIRESTOP AND FIRE PROTECTION SYSTEMS 9

Firestop Sealants, Sprays

Flexible firestop sealant CP 606 Page 346
Elastomeric silicone sealant CP 601S Page 347
High performance intumescent firestop sealant FS-ONE MAX Page 348
Firestop intumescent sealant CP 611A Page 349
Firestop joint spray CFS-SP WB Page 351

Firestop Putties
Firestop putty pad CP 617 Page 352
Firestop cable disc CFS-D 1” Page 353

Firestop Foams
Firestop foam CP 620 Page 354
Firestop foam CFS-F FX Page 355

Firestop Block and Plug Systems

Firestop block CFS-BL Page 357
Firestop composite sheet CFS-COS Page 358

Firestop Coating Systems, Cushions and Mortars

Firestop mortar CP 636 Page 359
Firestop board, coating CP 670 Page 360
Firestop board CP 670 Page 361
Firestop cushion CP 651N Page 362

Firestop Collars, Wraps and Bandages

Firestop bandage CFS-B Page 363
9
Firestop collar CP 643 N Page 364
Firestop collar CP 644 Page 365
Firestop collar endless CFS-C EL Page 366
Firestop wrap strip CP 648-E Page 367

Firestop Cast-In and Sleeve Devices

Firestop sleeve CFS-SL GA Page 368
CFS-CID Firestop cast-in device Page 369

Cable Protection
Firestop cable coating CP 678 Page 370

Customer Hotline: Hong Kong 8228 8118, Macau 00800 8228 8118 Email: [email protected]
341
 Problem
10 The illustration on the left indicates a range 
of typical problems facing the designer.  

Construction may consist of:
• concrete
• concrete block
3 • wood
• gypsum

The problem areas are:
  1  Movement joints
7   2  Rigid or low movement joints
  3  Head of wall and perimeter joints
  4  Metal
  5  Plastic pipes
  6  Multiple penetrations, pipes and/
11 or cables
  7  Cable trays (with permanent sealing 
of opening during construction, or 
8 temporary sealing allowing additional 
cables to be installed subsequently)
  8  Cable trays (with permanent sealing
of opening during construction)
  9  Cables (single or bundled)
 10  Electrical boxes
  11  Heating/ventilation/air conditioning

Fire resistance rating

To help prevent the rapid spread of fire
within a building, certain walls, floors
and joints are required to meet a
specific fire resistance rating — the
period of time during which a building
6 9 component has been tested to confine
a fire or continue to perform a struc-
tural function or both. Through-pen-
etrations and joints created during the
construction process require the instal-
lation of firestop systems in order to
bring the wall or floor back up to its or
orginal fire-rating.

Firestopping
It is essential that every penetration

4 2 or joint in a fire-rated wall or floor is

adequately protected by sealing — or
“firestopping” — such that the building
componet is restored to its original
fire-rated condition in order to maintain
compartmentalization. The quality and
1
5 excellence of Hilti Firestop Products
help ensure that fire, smoke and toxic
gases are contained to reduce the
tragic loss of human life and damage
to property.

Hilti online: www.hilti.com.hk

342
 FIRESTOP AND FIRE PROTECTION SYSTEMS 9

Hilti Firestop Solutions
The illustration on the left provides a basic 
guide to the range of Hilti Firestop products 
available for the applications shown.

Building Construction & 

 A  Flexible Firestop Sealant (CP 606/601S)
B Firestop Mortar (CP 636) /
Firestop composite sheet (CFS-COS)
C  Firestop Board (CP 670)
D  Firestop Joint Spray (CFS-SP WB)

Mechanical & Eelectrical 
Application
E  Firestop Collar (CP 643N/644/CFS-C EL)
F  Firestop Block (CFS-BL)
G  Firestop Putty Pad (CP 617)
H  Fire Foam (CP 620/CFS-F FX)
I  Firestop Wrap Strip (CP 648-E)

    Speed Sleeve (CFS-SL GA)

J

  K  FS-ONE MAX High Performance
  Intumescent Sealant 
Firestop intumescent Sealant CP 611A
Firestop cable disc CFS-D 1”

Customer Hotline: Hong Kong 8228 8118, Macau 00800 8228 8118 Email: [email protected]
343
CP PRODUCTS TESTED FOR
At least 13 other types of test have been carried out covering properties such as water tightness, chemical compatability,
explosion resistance, radiation resistance, mould resistance, electrical resistance, etc.

CP 606
Smoke /Gas  Water   Acoustic  Mould &  Resistance  
Tightness  Tightness  Insulation Mildew Siesmic to Aging* 

CP 601S
Smoke /Gas  Water   Acoustic  Mould &  Resistance  
Tightness  Tightness  Insulation Mildew Siesmic to Aging* 

FS-One Max
Smoke /Gas  Water   Acoustic  Mould &  Resistance  
Tightness  Tightness  Insulation Mildew Siesmic to Aging* 

CP 611A
Smoke /Gas  Water   Acoustic  Mould &  Resistance  
Tightness  Tightness  Insulation Mildew Siesmic to Aging* 

CFS-SP WB
Smoke /Gas  Water   Acoustic  Mould &  Resistance  
Tightness  Tightness  Insulation Mildew Siesmic to Aging* 

CP 617 Acoustic  Mould &  PLANNED

Insulation Mildew

WITH Mould & 
CFS-D 1” PLANNED
SEALANT Mildew

CP 620
Smoke /Gas  Water   Acoustic  Mould &  Resistance  
Tightness  Tightness  Insulation Mildew Siesmic to Aging* 

CFS-F FX
Smoke /Gas  Acoustic  Mould &  Resistance  
Tightness  Insulation Mildew Siesmic to Aging* 

CFS-BL
Smoke /Gas  Acoustic  Mould &  Resistance  
Tightness  Insulation Mildew Siesmic to Aging* 

CP 636 Acoustic  Mould &  Resistance  

Insulation Mildew Siesmic to Aging* 

CP 670
Smoke /Gas  Water   Acoustic  Mould &  Resistance  
Tightness  Tightness  Insulation Mildew Siesmic to Aging* 

WITH Acoustic  Mould &  Resistance  

CP 651 N
SEALANT Insulation Mildew to Aging* 

WITH WITH Acoustic  Mould &  Resistance  

CFS-B
SEALANT SEALANT Insulation Mildew Siesmic to Aging* 

WITH WITH NOT Mould &  Resistance  

CP 643
SEALANT SEALANT APPLICABLE Mildew Siesmic to Aging* 

WITH WITH NOT Mould &  Resistance  

CP 644
SEALANT SEALANT APPLICABLE Mildew Siesmic to Aging* 

WITH WITH Acoustic  Mould &  Resistance  

CFS-C EL
SEALANT SEALANT Insulation Mildew to Aging* 

WITH WITH Acoustic  Mould &  Resistance  

CP 648-E
SEALANT SEALANT Insulation Mildew Siesmic to Aging* 

CFS-SL GA Acoustic  Mould &  Resistance  

Insulation Mildew Siesmic to Aging* 

CP 678 Mould &  PLANNED

Mildew Siesmic

WITH WITH Acoustic  Mould & 

CFS-COS PLANNED
SEALANT SEALANT Insulation Mildew
* Fire resistance test reports / approvals / certificates normally do not contain any information on the service life of a firestop product / assembly. By carrying out own additional ageing tests which simulate extreme temperature / humiditycon-
ditions, Hilti provides its customers with a very high level information on product reliability and service life expectancy of the Hilti firestop systems. On the basis of the ageing cycles obtained in these test procedures as well as of experience
gained in the field of concrete construction, it can be assumed that Hilti firestop systems have a service life (ageing resistance) of approximately 30 years from manufacturing date.

Hilti online: www.hilti.com.hk

344
 FIRESTOP AND FIRE PROTECTION SYSTEMS 9

PRODUCTS APPROVALS AND TESTING

CP 606
BS 476-20
BS EN 1366-3

CP 601S
BS 476-20
BS EN 1366-3

FS-One Max
BS 476-20

CP 611A
BS 476-20
BS EN 1366-3

CFS-SP WB
BS EN 1364-4
BS EN 1364-3

CP 617
BS 476-20
BS EN 1364-1

CFS-D 1”
BS 476-20
BS EN 1364-1

CP 620
BS 476-20

CFS-F FX BS EN 1366-3

CFS-BL
BS 476-20
BS EN 1366-3

CP 636
BS 476-20
BS EN 1366-3

CP 670
BS 476-20
BS EN 1366-3

CP 651 N
BS 476-20
BS EN 1366-3

CFS-B
BS 476-20
9
CP 643
BS 476-20
BS EN 1366-3

CP 644
BS 476-20
BS EN 1366-3

CFS-C EL
BS 476-20
BS EN 1366-3

CP 648-E
BS 476-20
BS EN 1366-3

CFS-SL GA
BS 476-20
BS EN 1366-3

CP 678
BS 476-20

CFS-COS
BS 476-20

Please note that this expected long-term ageing resistance of Hilti firestop systems, which is given on the basis of the above-mentioned tests, depends on a number of factors on which Hilti basically has no influence ( e.g. environ-
mental factors such as extreme environmental conditions, e.g. chemicals, etc. ) and, therefore, are subject to the following conditions which must be strictly observed by the user with regard to the respective Hilti firestop system:
• Strict adherence to the Hilti’s operating, setting, installing and other technical instructions;
• Rigorous compliance with all other conditions set in the respective specifications during the lifetime of the Hilti firestop systems, in particular with regard to regular control and maintenance as well as to foreseeable use under
normalclimatic condition in the respective field of application.
Customer Hotline: Hong Kong 8228 8118, Macau 00800 8228 8118 Email: [email protected]
345
Flexible firestop sealant CP 606

APPLICATIONS Technical data

● Sealing rigid or low-movement ceiling/wall joints, widths from 6 Chemical basis Water-based acrylic dispersion
to 30 mm Base materials Concrete, Masonry, Drywall, Steel
● Sealing metal pipe penetrations Movement1) ±12.5% (ISO 11600)
● For use in various base materials such as masonry, concrete, Approx. tack-free time (ventilated 20 min
drywall and metal at 77°F, 80% rel. humidity)
Approx. curing time2) 3 mm/3 days
Average volume shrinkage 22.2%
ADVANTAGES
Application temperature range 5 - 40 °C
● Paintable
Temperature resistance range -30 - 80 °C
● Easy to clean up with water
Storage and transportation 5 - 25 °C
● Smoke, fume and water resistant temperature range
Shelf life3) 24 Months
1)
according to HTC 1250
2)
at 75°F/24°C, 50% relative humidity
3)
at 77°F/25°C and 50% relative humidity; from date of manufacture
Water 
Smoke Acoustic Siesmic
Tight

Mould &
Mildew

Consumption Guide
Cartridge volume = 310 ml (CP 606)
a = Joint width in mm
b = Sealant depth in mm
Linear metre per cartridge = Cartridge volume in ml
a  x  b
e.g.a floor 20mm wide with product depth of 10mm; with 310ml cartridge
Therefore linear metres per cartridge = 310/(20 x 10) = 1.55 metre per cartridge
for one side of the floor

Order Now

Ordering designation Colour Volume per unit Packaging Sales pack Item number
quantity
CP 606 310ml INT grey Grey 310 ml Cartridr 1 pc 209630
CP 606 580ml INT grey Grey 580 ml Foil pack 1 pc 209633
CP 606 310ml white white 310 ml Cartridr 1 pc 209625
CP 606 580ml white white 580 ml Foil pack 1 pc 209632

Please visit Hilti website for the latest item numbers and related products

Hilti online: www.hilti.com.hk

346
 FIRESTOP AND FIRE PROTECTION SYSTEMS 9
Elastomeric silicone sealant CP 601S

APPLICATIONS Technical data

● Expansion or stretched connection joints in fire compartment Chemical basis Neutral elastic silicone
walls and floors Base materials Masonry, Metal, Concrete, Glass
● Uninsulated metal pipes in penetrations through fire Movement1) ± 25% (ISO 11600)
compartment walls and floors Approx. tack-free time (ventilated 15 min
● Acoustic insulation of pipes at 77°F, 80% rel. humidity)
● Suitable for outdoor use Approx. curing time2) 2 mm/3 days
Average volume shrinkage 5%
● For use on concrete and masonry (indoors/outdoors)
Application temperature range 5 - 40 °C
Temperature resistance range -40 - 160 °C
ADVANTAGES
Storage and transportation 5 - 25 °C
● Weather and UV-resistant temperature range
● Excellent movement capability Shelf life3) 12 Months
● Smoke, gas and water-resistant 1)
according to HTC 1250
2)
at 75°F/24°C, 50% relative humidity
3)
at 77°F/25°C and 50% relative humidity; from date of manufacture

Water 
Smoke Acoustic Siesmic
Tight

Mould &
Mildew

Consumption Guide
Cartridge volume = 310 ml (CP 601S)
a = Joint width in mm
b = Sealant depth in mm
Linear metre per cartridge = Cartridge volume in ml
a  x  b
e.g.a floor 50mm wide with product depth of 10mm; with 310ml cartridge
Therefore linear metres per cartridge = 310/(50 x 15) = 0.41 metre per cartridge
for one side of the floor
9

Order Now

Ordering designation Colour Volume per unit Packaging Sales pack Item number
quantity
CP 601S 310ML grey Grey 310 ml Cartridr 1 pc 310635
CP 601S 600ML grey Grey 600 ml Foil pack 1 pc 3121111)
CP 601S 310ML white White 310 ml Cartridr 1 pc 310633
CP 601S 600ML white White 600 ml Foil pack 1 pc 3106371)
1)
For detailed stock availability and lead time information please contact your Hilti representative.

Please visit Hilti website for the latest item numbers and related products

Customer Hotline: Hong Kong 8228 8118, Macau 00800 8228 8118 Email: [email protected]
347
High performance intumescent firestop sealant FS-ONE MAX

APPLICATIONS Technical data

● For effectively sealing most common through penetrations in a Chemical basis Water-based acrylic dispersion
variety of base materials Base materials Concrete, Concrete block, Metal,
● Copper and EMT pipes Wood, Gypsum
Expansion ratio (unrestricted, 1:5
● Insulated steel and copper pipes
up to)
● Single cables and cable bundles
Approx. curing time1) 4 mm/3 days
● Closed or vented plastic pipes Average volume shrinkage 19.4 %
● HVAC penetrations Application temperature range 5 - 40 °C
Temperature resistance range -20 - 100 °C
ADVANTAGES Storage and transportation 5 - 25 °C
● One product for most firestop applications temperature range
● Cost-effective solution Shelf life3) 18 Months
1)
at 75°F/24°C, 50% relative humidity
● Easy to work with and fast cleanup 2)
at 77°F/25°C and 50% relative humidity; from date of manufacture

Water  Siesmic
Smoke Acoustic
Tight

Mould &
Mildew

Application Procedure
CABLE

1. Clean  2. Pack  3. Apply  4. Smooth  5. Leave  6. Fasten 

opening Mineral   FS-ONE MAX. FS-ONE MAX. completed  identification  
wool. seal undis-  plate.
  (If required) turbed for 48    (If required)
hours.
PIPE

1. Clean  2. Pack  3. Apply  4. Smooth  5. Leave  6. Fasten 

opening Mineral   FS-ONE MAX. FS-ONE MAX. completed  identification  
wool. seal undis-  plate.
  (If required) turbed for 48    (If required)
hours.

Order Now

Ordering designation Colour Volume per unit Packaging Sales pack  Item number

quantity
FS-ONE MAX 10.1OZ CART  Red 300 ml Cartridge 1 pc 2101534

Please visit Hilti website for the latest item numbers and related products

Hilti online: www.hilti.com.hk

348
 FIRESTOP AND FIRE PROTECTION SYSTEMS 9
Firestop intumescent sealant CP 611A

APPLICATIONS Technical data

● Single cables and cable bundles Chemical basis Water-based acrylic dispersion
● Plastic pipes up to 50 mm (2”) diameter without additional collar Base materials Concrete, Concrete block, Metal,
Wood, Gypsum
● Sealing penetrations previously sealed with firestop mortar, after
Movement1) No
installing additional cables
● Small openings Expansion ratio (unrestricted, 1:10
up to)
Approx. tack-free time (ventilated 15 min
ADVANTAGES at 77°F, 80% rel. humidity)
● Paintable Approx. curing time2) 3 mm/3 days
● Fast, easy application and cleaning up Application temperature range 5 - 40 °C
● Particularly suitable for laying new cables Temperature resistance range -40 - 100 °C
● Silicone-free Storage and transportation 5 - 25 °C
temperature range
● Easy to clean with water
Shelf life3) 12 Months
1)
according to HTC 1250
2)
at 75°F/24°C, 50% relative humidity
Water 
Smoke Acoustic Siesmic 3)
at 77°F/25°C and 50% relative humidity; from date of manufacture
Tight

Mould &
Mildew

Consumption Guide

==

==

b b

No. of cartridges needed,
c a

Order Now

Ordering designation Colour Volume per unit Packaging Sales pack  Item number

quantity
CP 611A INT  Anthracite 310 ml Cartridge 1 pc 220351

Please visit Hilti website for the latest item numbers and related products

Customer Hotline: Hong Kong 8228 8118, Macau 00800 8228 8118 Email: [email protected]
349
 Hilti online: www.hilti.com.hk
350
 FIRESTOP AND FIRE PROTECTION SYSTEMS 9

Firestop joint spray CFS-SP WB

APPLICATIONS Technical data

● Sealing openings between the top of walls and concrete or Chemical basis Water-based acrylic dispersion
metal floors / ceilings Base materials Concrete, Masonry, Gypsum, Steel,
● Sealing building perimeter gaps between floor slabs or vertical Aluminium, Glass
wall and exterior curtain wall facades Movement1) Up to 50 %
Approx. tack-free time (ventilated 180 min
at 77°F, 80% rel. humidity)
ADVANTAGES
Approx. curing time2) 3 mm/day
● Water-based, low VOC, contains no halogens Average volume shrinkage 0.511
● High degree of elasticity - movement capability of up to 50% Application temperature range 4 - 40 °C
● Excellent sprayability and low slump characteristics Temperature resistance range -40 - 80 °C
● Fast, efficient sealing of wide, difficult-to-access joints Storage and transportation 4 - 25 °C
temperature range
Smoke leakage (BS EN 12101-1) 0.5m3/h/m2 at 25Pa ambient
Water  temperature at both ambient
Smoke Acoustic Siesmic
Tight temperature and medium
temperature 200°C
Coating thickness 3mm (required wet film thickness)
Mould & 1.5mm (single dry film thickness)
Mildew
Surface burning characteristics Flame spread: 5
(ASTM E 84-06) Smoke development: 10
Sound transmission classification 59 db
(ASTM E 90-00)
Consumption Guide (per 19000 ml bucket) Content 19 L (25.5kg)
Joint width   With overlap 15 mm Meters per 19 litres Shelf life after production3) 12 months (stored in a dry place)
(mm) both sides (mm) pail (meters) Mineral wool thickness* Minimum 100mm
25 55 110 * Please contact Hilti representatives for technical details
50 80 75 1)
according to HTC 1250
2)
at 75°F/24°C, 50% relative humidity
100 130 45 3)
at 77°F/25°C and 50% relative humidity;
150 180 35 from date of manufacture
200 230 25

Application Procedure
9

Order Now

Ordering designation Colour Volume per unit Packaging Sales pack  Item number

quantity
CFS-SP WB red Red 19000 ml Bucket 1 pc 430815

Please visit Hilti website for the latest item numbers and related products

Customer Hotline: Hong Kong 8228 8118, Macau 00800 8228 8118 Email: [email protected]
351
Firestop putty pad CP 617

APPLICATIONS Technical data

● Can be used for commercial and residential applications Colour Red
● Accoustically rated drywall - sound transmission classification Electrical resistance data Non-conductive
59 according to ASTM E90-97 (based on specific construction) Acoustic insulation Yes
● General gypsum wall assemblies with wood or metal studs Intumescent Yes
● Socket Box, lift call button, lift indicator panel Application temperature range 0 - 40 °C
Temperature resistance range -20 - 60 °C
Storage and transportation -5 - 40 °C
ADVANTAGES
Acoustic index (Tested to 64 dB
● Excellent adhesion to gypsum, metal and plastic DIN EN20140)
● No oil migration, putty remains flexible over time
● Pad can be moulded by hand without leaving residue on the
hands
● Quick and simple to install
● Not electrically conductive

Mould &
Acoustic
Mildew

Application Procedure

1. Remove label  2. Adhere CP 617  3. Reshape CP 617  4. Press CP 617 to 

from one side of  to application fit around box all sides of 
CP 617 application

Order Now

5. Remove other 
side of label

Ordering designation Package contents Sales pack quantity Item number

CP 617 6”x7” 1x Firestop putty pad CP 617 6”x7” 20 pc 309760
CP 617 XL 9”x9” 1x Firestop putty pad CP XL 617 9”x9” 20 pc 373387

Please visit Hilti website for the latest item numbers and related products

Hilti online: www.hilti.com.hk

352
 FIRESTOP AND FIRE PROTECTION SYSTEMS 9
Firestop cable disc CFS-D 1”

APPLICATIONS Technical data

● Pre-formed firestopping solution for single cables and small Colour Red
cable bundles in openings up to max. 25 mm Base materials Concrete, Masonry, Drywall
● All cable types currently and commonly used in building practice Application temperature range 0 - 40 °C
in Europe (e.g. power, control, signal, telecommunications, Acoustics performance Test report available
emergency and optical fibre cables) Approx. density 1600 kg/m³
● For use on drywall, masonry and concrete Mold and mildew performance Class 0 (EN ISO 846)
● Suitable for plastic and metal conduits Intumescent No
● Covers regular and irregular openings (including blank openings) Approvals ETA-16/0050
Can be painted No
ADVANTAGES Electrical resistance data Non-conductive

● Simple – sealant-free installation European VOC Available

Packaging Box
● No backfilling material required
● Fast – installed in 10 seconds
● Powerful – broad application range
● Surface-mounted solution
● Minimises waste

Smoke Mould &

Acoustic
Mildew

Order Now
9

Ordering designation Package contents Sales pack quantity Item number

CFS-D 1” 1x Firestop cable disc CFS-D 1” 32 pc 2116245

Please visit Hilti website for the latest item numbers and related products

Customer Hotline: Hong Kong 8228 8118, Macau 00800 8228 8118 Email: [email protected]
353
Firestop foam CP 620

APPLICATIONS Technical data

● Concrete, drywall and masonry Chemical basis Two-component polyurethane foam
● Multiple and mixed penetrations Colour Red
● Single cables, cable bundles and cable trays Base materials Concrete, Masonry, Drywall
● Metal pipes Volume per unit 300 ml
Foam yield (up to) 1.9 l
● Suitable for irregular and difficult-to-reach openings
Approx. cut time (at 23°C / 50% 2 min
rel. humidity)
ADVANTAGES Application temperature range 0 - 40 °C
● Innovative firestopping solution for complex and difficult-toreach Temperature resistance range -30 - 100 °C
applications Storage and transportation 5 - 25 °C
● Virtually impervious to smoke temperature range
● Excellent water and vapour resistance Shelf life1) 9 months
● Single-sided installation possible at 77°F/25°C and 50% relative humidity; from date of manufacture
1)

● Easy to use in openings where access is poor

Water 
Smoke Acoustic Siesmic
Tight

Mould &
Mildew

Application Procedure

Order Now

Ordering designation Volume per unit Package contents Sales pack quantity Item number
CP 620 300 ml 1x Firestop foam CP 620 EN/DE/FR/IT/NL/TH 1 pc 2025085

Please visit Hilti website for the latest item numbers and related products

Hilti online: www.hilti.com.hk

354
 FIRESTOP AND FIRE PROTECTION SYSTEMS 9
Firestop foam CFS-F FX

APPLICATIONS Technical data

● Mechanical: Non-combustible (metal) pipes with mineral wool/ Chemical basis Two-component polyurethane foam
non-flammable insulation, small combustible (plastic) pipes Colour Red
● No smoke/gastight additional sealing and no backing material Base materials Concrete, Masonry, Drywall
required Volume per unit 325 ml
● Electrical: Single cables, cable bundles, cable tray and trunking Foam yield (up to) 2.1 l
Approx. cut time (at 23°C / 50% 10 min
ADVANTAGES rel. humidity)
● 3-phase technology with optimum application characteristics Application temperature range 10 - 35 °C
(easily-shapeable foam) Temperature resistance range -30 - 60 °C
● Easily applied using a Hilti cordless electric dispenser Storage and transportation 5 - 25 °C
temperature range
● Neat and tidy application
Shelf life1) 9 Months
● Very quick and easy to install and provides a reliable firestop 1)
at 77°F/25°C and 50% relative humidity; from date of manufacture
seal with only one product
● Maintenance and retrofitting of cables is very easy
● Reliable sound insulation properties, due to the flexible foam
structure

Mould &
Mildew

Application Procedure

1. Clean the opening to  2. Slide the foil pack into  3. Screw the mixing  4. Insert the holder 

be sealed the holder nozzle all the way onto  containing the foil 
the foil pack and  pack into the 
tighten it securely dispenser

5. Discard the unevenly  6. Apply the firestop  7. Shaped or smoothed 

mixed initial quantity foam in the opening to  by hand (if necessary) 
be sealed after 5mins (approx.) 
and can be cut after 
10mins (approx.)

Order Now Watch Video

Ordering designation Volume per unit Package contents Sales pack  Item number

quantity
CFS-F FX 325 ml 1x Firestop foam CFS-F FX -CE 1 pc 429802

Please visit Hilti website for the latest item numbers and related products
Customer Hotline: Hong Kong 8228 8118, Macau 00800 8228 8118 Email: [email protected]
355
Accessories for Firestop Foams

Hilti online: www.hilti.com.hk

356
 FIRESTOP AND FIRE PROTECTION SYSTEMS 9
Firestop block CFS-BL

APPLICATIONS Technical data

● Temporary or permanent sealing around cables, cable bundles Chemical basis PU
and cable trays in wall and floor openings Dimensions (LxWxH) 200 x 130 x 50 mm
● Cables, cable bundles and cable trays Expansion temperature (approx.) 200 °C
Expansion ratio (unrestricted, 1:3
up to)
ADVANTAGES
Reaction to fire class (EN E
● Easy to install, no electric tools required 13501-1)
● Economical installation as the block is pre-cured and Application temperature range 5 - 40 °C
ready-to-use Colour Red
● Painting of cables with firestop coating is not required Storage and transportation -5 - 40 °C
● Installation of cables with zero separation to the edge of the temperature range
penetration is possible
● Best solution for repenetation

Smoke Acoustic Siesmic

Mould &
Mildew

Consumption Guide

Application Procedure
9

1. Clean opening 2a. Build up blocks 2b. Cut blocks to  3. Build up blocks

size for  
penetration in 
place

Order Now Watch Video

4. Fill gaps with 
FS-ONE MAX3 /  
CP 611A

Ordering designation Package contents Sales pack  Item number

quantity
CFS-BL  1x Firestop block CFS-BL 1 pc 2062863

Please visit Hilti website for the latest item numbers and related products

Customer Hotline: Hong Kong 8228 8118, Macau 00800 8228 8118 Email: [email protected]
357
Firestop composite sheet CFS-COS

APPLICATIONS Technical data

● For use with large wall and floor fire-rated assemblies Application temperature range -30 to 48°C
● Compatible with Hilti Speed Sleeve and gangplate for floor gang Temperature resistance range -30 to 120°C
applications Expansion ratio (unrestricted, 1:18
up to)
● Intumescent sheet with #304 stainless steel backing for firestop-
ping large openings Storage and transportation -30 to 48°C
temperature range
Color Silver
ADVANTAGES Dimensions (LxWxH) 910 x 910 x 3.8 mm
● For use with fire-rated assemblies (up to 4 hrs) Intumescent Yes
● Compatible with Hilti sleeve devices for easy cable management 1)
at 77°F/25°C and 50% relative humidity; from date of manufacture
● Can be fastened using Hilti screw anchor , GX or BX tools – to
increase installation efficiency and productivity
● Multi-board systems allow very large openings
● Non-magnetic #304 stainless steel construction ensures good
weatherability and no inductive loss in cables
● Fast installation system requires fewer anchors

Order Now

Ordering designation Package contents Sales pack Item number

quantity
Firestop Composite Sheet CFS-COS 1x CFS-COS Firestop Composite Sheet 4 pc 2135884

Please visit Hilti website for the latest item numbers and related products

Hilti online: www.hilti.com.hk

358
 FIRESTOP AND FIRE PROTECTION SYSTEMS 9
Firestop mortar CP 636

APPLICATIONS Technical data

● Permanent firestopping of cables, cable trays, and non-combustible Base materials Concrete, Masonry
pipes in medium to large wall and floor openings Approx. mix ratio 3:1 (mortar to water by weight)
● Single, multiple and mixed penetrations Working time (approx.) 45 min
● Medium to large multiple penetrations in concrete and masonry Cured density - min. 700 kg/m³
in combination with other products Max. compressive strength 2.9 N/mm²
● Lift door frame after 28 days
Application temperature range 5 - 80 °C
Temperature resistance range -10 - 80 °C
ADVANTAGES
Storage and transportation 5 - 30 °C
● Excellent application characteristics temperature range
Shelf life1) 12 Months
Colour Grey
Mould &
Acoustic Siesmic 1)
at 77°F/25°C and 50% relative humidity; from date of manufacture
Mildew

Consumption Guide

Blank Opening

Application Procedure
9

Order Now

Ordering designation Weight Sales pack  Item number

quantity
CP 636 20KG  20 kg 1 pc 334897

Please visit Hilti website for the latest item numbers and related products

Customer Hotline: Hong Kong 8228 8118, Macau 00800 8228 8118 Email: [email protected]
359
Firestop board, coating CP 670

APPLICATIONS Technical data

● Permanent firestopping of blank openings, cables, cable trays, Base materials Drywall, Concrete, Masonry
non-combustible and combustible pipes in medium to large wall Approx. density 1470 kg/m³
and floor openings Application temperature range 5 - 40 °C
● Ideal for large openings Temperature resistance range -40 - 100 °C
Storage and transportation 5 - 30 °C
ADVANTAGES temperature range
● Solvent- and silicone-free Shelf life1) 15 Months
Colour White
● Fully functional immediately after installation
1)
at 77°F/25°C and 50% relative humidity; from date of manufacture
● Smoke tight

Mould &
Mildew

Application Procedure

Order Now Watch Video

Ordering designation Weight Sales pack  Item number

quantity
ROCK WOOL 1.2X0.6-50/D160 - 5 pc 3435517
CP 670 6kg  6 kg 376023

Please visit Hilti website for the latest item numbers and related products 1 pc 376023

Hilti online: www.hilti.com.hk

360
 FIRESTOP AND FIRE PROTECTION SYSTEMS 9
Firestop board CP 670

APPLICATIONS Technical data

● Permanent firestopping of blank openings, cables, cable trays, Base materials Drywall, Concrete, Masonry
non-combustible and combustible pipes in medium-to-large wall Dimensions (LxWxH) 1200 x 600 x 50 mm
and floor openings Approx. board density 160 kg/m³
● Ideal for large openings Application temperature range 5 - 40 °C
Temperature resistance range -40 - 100 °C
ADVANTAGES Storage and transportation 0 - 40 °C
● Board pre-coated for immediate use temperature range
Colour White
● Virtually no cracking or delamination during cutting
● Broad approval range

Mould &
Mildew

Application Procedure

Order Now

Ordering designation Dimensions (LxWxH) Sales pack  Item number

quantity
CP 670 1200x600x50 white 1200 x 600 x 50 mm 16 pc 236673

Please visit Hilti website for the latest item numbers and related products 16 pc 236673

Customer Hotline: Hong Kong 8228 8118, Macau 00800 8228 8118 Email: [email protected]
361
Firestop cushion CP 651N

APPLICATIONS Technical data

● Temporary sealing of openings in floors and walls through the Base materials Drywall, Concrete, Masonry
construction phase Approx. density 350 kg/m³
Application temperature range -30 - 35 °C
ADVANTAGES Temperature resistance range -40 - 120 °C
● Quick and easy installation Storage and transportation -30 - 40 °C
temperature range
● No special tools required
Colour White
● Very economical in use thanks to optimized cushion dimensions
● Re-usable and thus economical
● Fully functional immediately after installation
● Tear-resistant and dust-free installation

Mould &
Mildew

Application Procedure

Order Now

Ordering designation Dimensions (LxWxH) Sales pack  Item number

quantity
CP 651N-S  300 x 40 x 30 mm 30 pc 3826241)
CP 651N-M  300 x 80 x 30 mm 15 pc 3826251)
CP 651N-L  300 x 170 x 30 mm 6 pc 3826261)
1)
 This is a non-stock item. For detailed lead time information please contact your Hilti representative.

Please visit Hilti website for the latest item numbers and related products

Hilti online: www.hilti.com.hk

362
 FIRESTOP AND FIRE PROTECTION SYSTEMS 9
Firestop bandage CFS-B

APPLICATIONS Technical data

● Firestopping around insulated (hot/cold) non-flammable pipes Base materials Concrete, Masonry, Drywall
● Pipe materials: copper, steel and other metals with heat conductivity Expansion temperature (approx.) 210 °C
lower than that of copper (e.g.cast iron, stainless steel etc.) Expansion ratio (unrestricted, 1:14
● Various insulation materials up to)
● Suitable for use in openings in concrete, masonry block or Storage and transportation -5 - 50 °C
temperature range
drywall
Length 10 m
Colour Grey
ADVANTAGES Thickness 2 mm
● Highly versatile - one product for a variety of insulation Width 125 mm
materials, pipe materials and pipe diameters
● Quick and easy to install - no drilling or additional tools needed
● No need to interrupt the pipe insulation material within the wall/
floor penetration
● Minimal thickness for easy installation in narrow gaps
● Good elasticity for optimum flexibility
● Very good acoustic insulation properties

Mould &
Smoke Siesmic
Mildew

Application Procedure
s

* Please consult Hilti representatives for application detail of different type of piping units

Order Now

Ordering designation Sales pack  Item number

quantity
CFS-B 1 pc 429557

Please visit Hilti website for the latest item numbers and related products

Customer Hotline: Hong Kong 8228 8118, Macau 00800 8228 8118 Email: [email protected]
363
Firestop collar CP 643 N

APPLICATIONS Technical data

● Plastic pipes with diameters from 20 - 160 mm Base materials Concrete, Masonry, Drywall
● Suitable for PVC, PE and HDPE pipes Expansion temperature (approx.) 250 °C
● For use in walls and floors Expansion ratio (unrestricted, 1:17
up to)
● Waste water pipes, fresh water pipes, drinking water pipes
Storage and transportation -5 - 50 °C
temperature range
ADVANTAGES
● Latch mechanism for quick and easy closure Application Procedure
● Allows correct installation where space is tight
● Flexible tab positioning for convenient fastening
● Ready-to-use product

Mould &
Siesmic 1. Close  2.  Clean  plastic  3. Close jacket 4. Attach  5. Repeat the 
Mildew remaining gap  pipe fastening  same jacket 
by mortar or  hooks installation 
by CP606 for  procedure for 
smoke and  the other side 
Fixing Method acoustic seal of the wall

Wall Floor

Order Now

OR

Surface mounted Surface mounted

Ordering designation Pipe diameter -   Collar outside Package contents Sales pack  Item number

range diameter quantity
CP643 1.5”/50 N (A2 SS) +   20- 51 mm 67 mm 2x Std stud anchor HSA-R M6x50 5/-/-,   1 pc 3503533
HSA-R M6 5/-/- 1x Firestop Jacket CP 643-50/1.5”N (A2 S.S)
CP643 2”/63 N (A2 SS) +   52 - 64 mm 82 mm 2x Std stud anchor HSA-R M6x50 5/-/-,   1 pc 3503534
HSA-R M6 5/-/- 1x Firestop jacket CP 643-63/2” N (A2 S.S)
CP643 2.5”/75 N (A2 SS) +   65 - 78 mm 102 mm 3x Std stud anchor HSA-R M6x50 5/-/-,   1 pc 3503535
HSA-R M6 5/-/- 1x Firestop jacket CP 643-72/2.5’ N (A2 S.S
CP643 3”/90 N (A2 SS) +   79 - 91 mm 117 mm 3x Std stud anchor HSA-R M6x50 5/-/-,   1 pc 3503536
HSA-R M6 5/-/- 1x Firestop jacket CP 643-90/3” N (A2 S.S)
CP643 4”/110 N (A2 SS) +   92 - 115 mm 146 mm 3x Std stud anchor HSA-R M6x50 5/-/-,   1 pc 3503538
HSA-R M6 5/-/- 1x Firestop jacket CP 643-110/4” N (A2 S.S)
CP643 5”/125 N (A2 SS) +   116 - 125 mm 166 mm 4x Std stud anchor HSA-R M6x50 5/-/-,   1 pc 3503539
HSA-R M6 5/-/- 1x Firestop jacket CP 643-125/5” N (A2 S.S)
CP643 6”/160 N (A2 SS) +   126 - 170 mm 236 mm 4x Std stud anchor HSA-R M6x50 5/-/-,   1 pc 3503540
HSA-R M6 5/-/- 1x Firestop jacket CP 643-160/6” N (A2 S.S)

Ordering designation Pipe diameter - range Collar outside diameter Sales pack  Item number

quantity
Firestop Jacket CP 643-50/1.5”N (A2 S.S) 20- 51 mm 67 mm 1 pc 3447172
Firestop jacket CP 643-63/2” N (A2 S.S) 52 - 64 mm 82 mm 1 pc 3447193
Firestop jacket CP 643-72/2.5’ N (A2 S.S) 65 - 78 mm 102 mm 1 pc 3447194
Firestop jacket CP 643-90/3” N (A2 S.S) 79 - 91 mm 117 mm 1 pc 3447195
Firestop jacket CP 643-110/4” N (A2 S.S) 92 - 115 mm 146 mm 1 pc 3447196
Firestop jacket CP 643-125/5” N (A2 S.S) 116 - 125 mm 166 mm 1 pc 3447197
Firestop jacket CP 643-160/6” N (A2 S.S) 126 - 170 mm 236 mm 1 pc 3447198
CP 643-50/1.5” N  32 - 51 mm 67 mm 1 pc 304325
CP 643-63/2” N  52 - 64 mm 82 mm 1 pc 304326
CP 643-75/2.5” N  65 - 78 mm 102 mm 1 pc 304327
CP 643-90/3” N  79 - 91 mm 117 mm 1 pc 304328
CP 643-110/4” N  92 - 115 mm 146 mm 1 pc 304329
CP 643-125/5” N  116 - 125 mm 166 mm 1 pc 304330
CP 643-160/6” N  126 - 170 mm 236 mm 1 pc 304331

Please visit Hilti website for the latest item numbers and related products

Hilti online: www.hilti.com.hk

364
 FIRESTOP AND FIRE PROTECTION SYSTEMS 9
Firestop collar CP 644

APPLICATIONS Technical data

● Sealing flammable pipes from 180 mm to 250 mm in diameter in Base materials Concrete, Masonry, Drywall
penetrations through fire compartment walls and floors Expansion temperature (approx.) 210 °C
Expansion ratio (unrestricted, 1:17
ADVANTAGES up to)
Storage and transportation -5 - 50 °C
● Ready-to-use firestop collar with a galvanized steel housing
temperature range
● Latch mechanism for quick and easy closure
Colour Metallic grey
● Flexible hook positioning for convenient fastening

Mould &
Siesmic
Mildew

Fixing Method
Wall Floor

OR

Surface mounted Surface mounted

Application Procedure

1. Close  2.  Clean p lastic  3. Close jacket 4. Attach  5. Repeat the 

remaining gap  pipe fastening  same jacket 
by mortar or  hooks installation 
by CP606 for  procedure for  Order Now
smoke and  the other side 
acoustic seal of the wall
9
Ordering designation Collar outer diameter
Outside diameter Sales pack  Item number
quantity
CP 644-180/7”  228 mm 1 pc 3043391)
CP 644-200/8”  257 mm 1 pc 3043401)
CP 644-225/9”  289 mm 1 pc 3043421)
CP 644-250/10”  319 mm 1 pc 3043431)
CP 644-250/10” US  319 mm 1 pc 3043441)
1)
 This is a non-stock item. For detailed lead time information please contact your Hilti representative.

Please visit Hilti website for the latest item numbers and related products

Customer Hotline: Hong Kong 8228 8118, Macau 00800 8228 8118 Email: [email protected]
365
Firestop collar endless CFS-C EL

APPLICATIONS Technical data

● Suitable for use on shaft walls, coated board, drywall, aerated Base materials Drywall, Aerated concrete,
concrete, masonry and concrete Concrete, Masonry
● Zero distance required to CFS-B firestop bandage, CFS-C EL Expansion temperature (approx.) 210 °C
firestop endless collar and Conlit Expansion ratio (unrestricted, 1:19
● Approved for use with PVC, PP, PE and a wide array of standard up to)
acoustic pipes. Storage and transportation -30 - 50 °C
temperature range
● Configurations tested include pipe elbows, inclined pipes and
Length 3m
pipes with limited clearance to the wall
● Acoustic pipes tested with insulation and sound decoupling

ADVANTAGES
● Flexible solution for waste water, roof drainage and pneumatic
pipes
● Problem solver for non-standard applications
● Endless solution: one product for all applications
● Well-suited to complex pipe configurations
● Easy installation

Acoustic Mildew

Order Now Watch Video

Ordering designation Pipe diameter - range Package contents Sales pack Item number
quantity
CFS-C EL 16 -160 mm 1x Firestop bandage CFS-C EL, 18x Closure plate CFS-C EL, 22x Hook CFS-C 1 pc 2075120
EL short

Please visit Hilti website for the latest item numbers and related products

Hilti online: www.hilti.com.hk

366
 FIRESTOP AND FIRE PROTECTION SYSTEMS 9
Firestop wrap strip CP 648-E

APPLICATIONS Technical data

● Combustible pipe penetrations Base materials Concrete, Masonry, Drywall
Expansion temperature (approx.) 210 °C
ADVANTAGES Expansion ratio (unrestricted, 1:19
up to)
● Quick and easy closure without tools
Storage and transportation -5 - 50 °C
● Easy to cut temperature range
● Fast installation Length 10 m
● Highest flexibility Colour Grey, printed foil
Dimensions (LxWxH) 10000 x 45 x 5 mm
Acoustic Mould &
Siesmic
Mildew

Application Procedure

9
1. Clean the  2.  Cut CP 648-E to the  3.  Wrap  the C P  648- E  4.  Close  remaining 
plastic pipe. correct length (see  around  the  pipe, fas- gap  to ensure  
measurement table  ten i t  with a dhesiv e  smoke  and  gas  
on product  tape  and  push i t  into  tight  seal.  Fasten 
packaging for help). the annular space. instal lation plate if 
required.

Fixing Method
Wall Floor

OR

Flush mounted Flush mounted Flush mounted Order Now

Ordering designation Sales pack  Item number

quantity
CP 648-E-W45/1.8”  1 pc 304310

Please visit Hilti website for the latest item numbers and related products

Customer Hotline: Hong Kong 8228 8118, Macau 00800 8228 8118 Email: [email protected]
367
Firestop sleeve CFS-SL GA

APPLICATIONS Technical data

● Sealing penetrations with single cables and cable bundles Base materials Concrete, Masonry, Drywall
● Expansion temperature (approx.) 160 °C
Suitable for small to medium-sized circular openings in walls,
ceilings and floors Intumescent Yes
Storage and transportation -5 - 50 °C
● For use on concrete, masonry and drywall
temperature range
Application temperature range -5 - 50 °C
ADVANTAGES Temperature resistance range -30 - 100 °C
● Quick and easy to install and inspect Approvals FM, UL, BS, EN
● Fully functional immediately after installation Reusable (and removable) Possible
● Robust Acoustics performance Test report available
● Optimum smoke-restriction performance
● Easy maintenance and retro-fitting of cables

Acoustic Siesmic Mould &

Mildew

Application Procedure

1a. For a 2“ sleeve:   2. Insert the sleeve. 4. Insert and spin 

3. 5. To open the device: 
4.
  use a 2.5” hole   the flange  (a) On one side of 
  saw to create a   clockwise onto  the wall, press the 
  hole. the device until  clip closures 
1b. For a 4“ sleeve:   you reach the  inward.
  use a 4.5” hole   wall. Repeat on    (b) Twist the device 
  saw to create a   other side of the  counterclockwise.
  hole. wall.

6. To close the 
5.
device:
  (a) On the same 
side of the wall, 
press the clip 
closure inward.
   (b) Twist the 
device clockwise 
intil finger-tight, 
allowing it to 
engage with a 
click. Order Now Watch Video

Ordering designation Outside diameter Recommended opening size Wall/Floor thickness Sales pack Item number
quantity
CFS-SL GA Small 63 mm 66-73 mm 100-200 mm 1 pc 2178492
CFS-SL GA Medium 110 mm 113-122 mm 100-200 mm 1 pc 2178493
CFS-SL GA Long 110 mm 113-122 mm 200-300 mm 1 pc 2178494

Please visit Hilti website for the latest item numbers and related products

Hilti online: www.hilti.com.hk

368
 FIRESTOP AND FIRE PROTECTION SYSTEMS 9
Firestop cast-in device CFS-CID

APPLICATIONS Technical data

● Concrete slabs built with traditional formwork Base materials Concrete
● New building construction Approvals EN 13501-2: 2007+A1:2009, EN
1366-3:2009
● Sealing combustible and non-combustible pipe penetrations
Height 250 mm
● Tested with pipe elbows, which allows reduced service zone
Application temperature range -5 - 50 °C
Temperature resistance range -20 - 100 °C
ADVANTAGES Color Red
● One-step firestop solution for a variety of pipe materials and Re-penetration Easy
diameters - no additional backfilling required Reaction to fire class (EN 13501-1) E
● Modular connection allows close placement of multiple
penetrations
● Quick and simple installation
● Integrated moisture and smoke seal
● Lid strong enough to carry foot traffic and light access
equipment

Mould &
Smoke
Mildew

Application Procedure

9
1. Place anchor channel 2. Cast in concrete. 3. Remove the cast-
into formwork and fixing Concrete level should in device cover. Insert
to the wood formwork be equal or lower than penpetrating pipe into
with nails and stamples / overall height of cast-in cast-in device.
fixing to the steel device Order Now Watch Video
formwork with rivets.
Ensure cover is
tightened to prevent
concrete from going in

Ordering designation Outside diameter Sales pack Item number

quantity
CFS-CID 50 40 - 63 mm 1 pc 2124523
CFS-CID 75 50 - 75 mm 1 pc 2124524
CFS-CID 110 80 - 110 mm 1 pc 2124525
CFS-CID 160 125 - 160 mm 1 pc 2124526

Please visit Hilti website for the latest item numbers and related products

Customer Hotline: Hong Kong 8228 8118, Macau 00800 8228 8118 Email: [email protected]
369
Firestop cable coating CP 678

APPLICATIONS Technical data

● Protection of cables and bunched cables on cable trays in Chemical basis Acrylate
indoor installations Weight 20 kg
● Meets IEC 60332-3-22 Category A standard for reduced spread Application temperature range 5 - 40 °C
of flame Temperature resistance range -30 - 80 °C
● Factory Mutual Approved (fire retardant coating of electrical Storage and transportation 5 - 30 °C
cables) temperature range
● For use in power plants, telecommunications complexes, Shelf life1) 18 Months
industrial plants, petrochemical plants, paper mills, factories and Colour White
production facilities 1)
at 77°F/25°C and 50% relative humidity; from date of manufacture

● Easy to apply using a paint brush or airless spray gun

ADVANTAGES
● Intumescent
● Water soluble, odourless and solvent free
● Free of fibres and asbestos
● No derating effects on cables
● Rapid drying, remains flexible when dry
● Compatible with the sheathing of electrical cables

Siesmic Mould &

Mildew

Consumption Guide

Test Standard Dry film  Wet film  Approx. 

thickness thickness Requirement
IEC 60332-3 1.0 mm coating 1.4 mm coating 1.8 kg/m²  
(1.4 liters/m²)
Factory Mutual  1.6 mm coating 2.2 mm coating 2.86 kg/m²  
Approval (2.2 liters/m²)
Note (a): Each 20 kilogram container of CP 678 contains approximately 
15.4 liters.

Note  (b): For cable trays or cable bundles with large cables, allow
approx. 10% wastage for application by brush or roller.
For cable trays or cable bundles with small cables, allow
approx. 20% wastage for application by brush or roller.

Application Procedure

Order Now
Clean cables Mix coating Apply coating

Ordering designation Weight Package contents Sales pack quantity Item number
CP 678 20KG 20 kg 1x Firestop cable coaing CP 678 1 pc 2348155

Please visit Hilti website for the latest item numbers and related products

Hilti online: www.hilti.com.hk

370
 FIRESTOP AND FIRE PROTECTION SYSTEMS 9

Customer Hotline: Hong Kong 8228 8118, Macau 00800 8228 8118 Email: [email protected]
371