Scribd
Upload
156 views2 pages

Wanhua PM2010

Uploaded by

Kamal Priyan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
156 views2 pages

Wanhua PM2010

Uploaded by

Kamal Priyan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PM-2010

Technical Data Sheet

Revision Date：2017-06-30 NO. WHPU _0023


Name：WANNATE ® PM-2010 Version：7.0

Application

WANNATE® PM-2010 is a mixture of high functionality isocyanate with diphenylmethane


diisocyanate. It is a brown liquid at room temperature.
WANNATE® PM-2010 is widely used in the production of rigid PU foam. Due to its unique
composition, WANNATE® PM-2010 provides better batch to batch consistency, flowability
and post-cure property. WANNATE® PM-2010 can provide light foam color and foaming
ratio. Therefore, it is particularly suitable for large refrigerators, freezers and complex parts
where good flowability is demanded.

Typical physical and chemical properties

Test Item(s) Specification(s)


Appearance Brown Liquid
Viscosity(25℃)/（mPa·s） 170-250
NCO Content/% 30.5-32.0
Density （25℃）/（g/cm3 ） 1.220-1.250
Acid Content/% ≤0.020
Hydrolysable Chlorine/% ≤0.20

Package(s)

210L iron drums, 250kg/drum

Storage

Since WANNATE® PM-2010 is a reactive chemical, reaction with atmospheric moisture


happens easily and leads to the formation of insoluble urea and carbon dioxide gas, which
can result in pressure build-up in closed containers and viscosity increase of the product.
Containers must therefore be absolutely dry and carefully sealed after congested with
nitrogen.
Containers of WANNATE® PM-2010 should be kept properly closed and stored indoors at
ambient temperature (15~35℃) in a well-ventilated area. Storage at low temperature (below
5℃) may lead to some crystallization; this material must, therefore, be protected from frost.

1/ 2 Wanhua Chemical Group Co., LTD


PM-2010
If crystallization does occur, the material should be heated to 70-80℃ to melt it out, and
should then be thoroughly agitated before use.
Extended storage at temperatures above 50℃ is not recommended to prevent from the
formation of insoluble solids and viscosity increase.

Shelf Life

Under recommended storage conditions, the shelf life of WANNATE® PM-2010 is one year
since the date of production.

For more information about safety and environment, please refer to our MSDS or
contact our customer service center.

Version information:

Date of 1st revise: Feb 6, 2015 Reason for revision: The need of product classification
Date of 2nd revise : May 5, 2015 Reason for revision: A change of company address
Date of 3rd revise : Aug.18, 2015 Reason for revision: Unified the template of TDS
Date of 4th revise: May 31, 2016 Reason for revision: Change of product standard.
Date of 5th revise: Mar. 21, 2017 Reason for revision: Change of specification of Acid
Content/%
Date of 5th revise: June 30, 2017 Reason for revision: Change of company LOGO.

For further information please contact us:


Address: Wanhua Chemical Group Co., Ltd.
No.17,Tianshan Rd,YEDA,Yantai,264006,China
Customer service: Tel: +86 (535) 3388000 Fax: +86 (535) 683 7242
Web-site: http://www.whchem.com
The information provided here is for reference only. The specification will be provided in the quality
certificate or in the contract. It is the user’s responsibility to test the material and its suitability for a
process. We have no control over what another party does with the material and we cannot take any
responsibility for another party’s action. Nor will we be responsible for any indirect damages while using
our products. The user is welcome to contact our customer and technical service center with questions on
our products.

2/ 2 Wanhua Chemical Group Co., LTD

You might also like