Scribd
Upload
37 views1 page

Glass Fluo Inks 3230 TDS - EN

This document provides technical data and instructions for Reinol glass fluo inks 3230. The inks are water-based and formulated for markers. They dry to a brilliant fluorescent color on non-porous surfaces like glass, foil, and whiteboards. The inks can be dry-erased after 4 days but is best to remove with a wet cloth after some time. The document provides specifications on viscosity, pH, dry time, and suitable marker components. It also lists handling and storage instructions, including keeping inks stirred and containers closed. The inks are packaged in 50kg and 200kg plastic drums.

Uploaded by

Lucie Leroy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
37 views1 page

Glass Fluo Inks 3230 TDS - EN

This document provides technical data and instructions for Reinol glass fluo inks 3230. The inks are water-based and formulated for markers. They dry to a brilliant fluorescent color on non-porous surfaces like glass, foil, and whiteboards. The inks can be dry-erased after 4 days but is best to remove with a wet cloth after some time. The document provides specifications on viscosity, pH, dry time, and suitable marker components. It also lists handling and storage instructions, including keeping inks stirred and containers closed. The inks are packaged in 50kg and 200kg plastic drums.

Uploaded by

Lucie Leroy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Strada del Francese, 21

10071 Borgaro Torinese – Torino – ITALY


Ph.: +39 (011) 4701510 or 4701511 or 4704541
Fax +39 (011) 4703910 – Email: [email protected]

TECHNICAL DATA SHEET

GLASS FLUO INKS 3230


TECHNICAL CHARACTERISTICS

Glass 3230 are water-based inks formulated for filter system markers. Opacity appears after traces are completely dry.
Brilliant fluo colors that can write on all kind of non-porous surfaces The inks can easily be dry-erased, but after some days it is better to
(glass, PP-foils, whiteboards). remove them with a wet cloth or water.

Colour ref. No: FLUO CYAN 3230 FLUO GREEN 3230 FLUO ORANGE 3230 FLUO RED 3230

Viscosity, cps (25 °C) Brookfield LV2


< 20 < 20 < 20 < 20
200rpm

pH : 8,5 ± 1 7,5 ± 1 7,5 ± 1 7,5 ± 1

Dry wipe : 4 days 4 days 4 days 4 days

Colour ref. No: FLUO PINK 3230 FLUO YELLOW 3230 FLUO VIOLET 3230

Viscosity, cps (25 °C) Brookfield LV2


< 20 < 20 < 20
200rpm

pH : 7,5 ± 1 7,5 ± 1 7,5 ± 1

Dry wipe : 4 days 4 days 4 days

SUITABLE COMPONENTS sunlight. Cleaning of all filling devices should be done immediately
after finishing the process.
Markers should ideally be stored horizontally and should be capped
firmly. INSTRUCTION FOR USE
Nibs/Tips: Polyester (porosity ~65%)
Reservoirs: De Martini CPE 2546 or similar (density 0,140-0,160 Stir ink in the drums well before use for at least 15-20 min. Keep the
g/cm3) inks under stirring while filling markers in order to avoid pigment
Body: Polypropylene, Polyethylene sedimentation.
It is recommended to thoroughly test the components selected. Drums should be closed tightly during storage.

HANDLING INSTRUCTIONS PACKING

50 KG net Plastic Drums


Store between 15°C and 35°C. Do not expose loose ink to
temperatures higher than 35°C. Protect from frost and avoid direct 200 KG net Plastic Drums

Any and all statements, information and recommendations contained in the present technical sheet are drawn up to the best of the experience and
knowledge of Reinol and based on tests which we regard as reliable. Nevertheless this does not imply any responsibility, either implicit or explicit,
on the side of Reinol. Buyers shall bear all risks arising from the use of the products, it is therefore understood that the sale of the product is not
protected by any guarantee, either implicit or explicit.

You might also like