ARES
WIR E LE SS CO NT RO L L ER
User Manual
HOME USB C PORT
BUTTON
BACK START
BUTTON BUTTON
LED LIGHT, PRESSURE SENSITIVE
TOGGLE ON OFF LEFT & RIGHT TRIGGERS
RUBBERISED
TEXTURED LED A B X Y
LEFT STICK BUTTONS WITH LED
RUBBERISED
DIRECTION PAD TEXTURED
RIGHT STICK
AUTO TURBO
FUNCTION FUNCTION
700MAH BACKLIT UPTO 8 METERS VIBRATION TURBO
BATTERY ACTION BUTTONS WIRELESS RANGE EFFECTS FUNCTION
SPECIFICATIONS
Model: ARES Wireless
Humidity: 20~80%
Temperature: -10°C~+60°C
Working current: <150mA
Product size : 156 X 105 X 55mm
Interface: USB
Packing size : 180 X 75 X 150mm
Agreement: USB 2.0/3.0
Work Voltage : 3.7-4.2v
Work Distance: 6-8 meter
Working Mode: ANDROID/Directlnput/Xinput/PS3
Product Weight: 220g
CONTROLLER
DESIGN
MODE AND INDICATOR STATUS
1. X INPUT: BLUE
2. DIRECT INPUT : RED
3. PC ANALOG: YELLOW
4. ANDROID: GREEN
5. PS3: AUTOMATIC
PLATFORM & CONNECTION:
PC: Windows
Plug and Play for Windows 8 and above
Android/PS3: No driver required
NOTE:
Android: Android 4.0 above, Requires OTG function. Connect the gamepad
to the phone using an OTG cable and wireless dongle.
Please contact android device manufacturer for android compatibility.
Android compatibility is not covered under warranty.
POWER OFF
Press B + Back Button for 5 seconds to turn off the controller
CHANGE MODE
Press the HOME key for more than 5 seconds: X-input and Direct input.
ABXY LED AND V LED SWITCH
1. Press X + Back button to turn off the ABXY LED , and the press again
to turn on LED.
2. Press A + Back button to turn off the V LED , and the press again to
turn on LED.
LEFT JOYSTICK AND D-PAD SWITCH
Press L3 + back change joystick and D-pad
DEVICE CONNECTION
Connect the gamepad with the PC using the wireless dongle. Make sure
there is no obstruction between the gamepad and the dongle for the
best connection. Use the USB Extension cable for best results.
NOTE:
1. You do not need to change the mode while connecting the gamepad
to android and PS3.
2. Gamepad will connect to Windows as X-input automatically.
3. If any difficulty in connecting the gamepad to Windows, please recon-
nect the gamepad.
TURBO - A, B, X, Y, L1, L2, R1, R2
1. Set turbo: Press (A, B, X, Y, L1, L2, R1, R2) button where you want to set
Turbo and then press turbo button.
2. Cancel turbo: Press (A, B, X, Y, L1, L2, R1, R2) button where you want to
cancel Turbo and then press turbo button.
AUTO TURBO - A, B, X, Y, L 1, L2, R1, R2
1. Set AUTO turbo: Press (A, B, X, Y, L1, L2, R1, R2)) button where you want
to set Turbo and then press AUTO button.
2. Cancel AUTO turbo: Press (A, B, X, Y, L1, L2, R1, R2) button where you
want to cancel Turbo and then press AUTO button.
BATTERY:
1. When the battery is low, the LED will flash and gamepad will turn off
the vibration to save battery.
2. When gamepad is being charged the LED will flash slowly.
3. When the charging is complete, the LED will turn off.
Note: Use only 5A/1V chargers or plug it to a PC USB port to charge the
gamepad. Using Fast chargers can damged the battery and compo-
nents.
Warranty will be void with usage of fast charging.
TROUBLESHOOTING
HOW TO PAIR ARES CONTROLLER
TO THE DONGLE
If the dongle and Controller Home button led light is continuously blin-
king it indicates that both are not paired to each other
PAIRING STEPS
1. Plug in the receiver to your PC
2. Press the Home button on the Controller
3. Now press the Home button twice when the lights start blinking
4. Both the LED on dongle and controller will stop blinking
5. The controller is now ready for use
SUPPORT DETAILS
Phone: 1800 31300 7700 (Mon-Fri 10am to 5PM)
Email:
[email protected]FAQ: support.thecosmicbyte.com
WARRANTY
The Controller carries 1 Year warranty against manufacturing defects only.
Physical, Water damage and Tampered products are not covered under warranty.
Regular wear and tear from battery usage is not covered under warranty.
Scan the QR code to know the Warranty Claim Procedure.
FAQ’S
support.thecosmicbyte.com
