Scribd
Upload
1K views1 page

GE 1150 HP Drilling Motor Specs

This document provides specifications for GE Transportation's 1150 HP AC drilling motor model 5GEB20B4. The motor is vertical and splash-proof, rated for 1150 continuous HP at speeds between 800-1550 RPM. It has features like a special frame and bearings for vertical operation, Class H insulation, and is ATEX and IECEx certified for hazardous areas. Additional components are required to be added by the user to achieve an IP44 enclosure rating.

Uploaded by

CordovaPJ
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views1 page

GE 1150 HP Drilling Motor Specs

This document provides specifications for GE Transportation's 1150 HP AC drilling motor model 5GEB20B4. The motor is vertical and splash-proof, rated for 1150 continuous HP at speeds between 800-1550 RPM. It has features like a special frame and bearings for vertical operation, Class H insulation, and is ATEX and IECEx certified for hazardous areas. Additional components are required to be added by the user to achieve an IP44 enclosure rating.

Uploaded by

CordovaPJ
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
  • Drill Rig Motor Standard Specification

GE Transportation

Drill Rig Motor


Standard Specification
Model Number: 5GEB20B4
Description
GE 1150 HP (858 kW) ATEX & IECEx certified AC drilling motor.

Type
Vertical, splash-proof fully guarded (IP44) with additional IP accessories, not provided by GE.

Ratings
Maximum continuous power: 1150 HP (858 kW), 7550 lb-ft (10240 Nm), 1120 AAC,
800 to 1550 rpm at 587 VAC; 800 to 2000 rpm at 640 VAC (motor terminal voltage)
Intermittent TD duty cycle: 10,600 lb-ft (14372 Nm), 1470 AAC, 0-100 rpm, (15 sec. on – 45 sec. off)
Maximum RPM: 2300
Temperature rating: 110⁰C rise at 45⁰C ambient (1150 HP, 858 kW)
100⁰C rise at 55⁰C ambient (1075 HP, 782 kW, 1048 AAC)
Features
 Special frame head and thrust bearing for vertical operation.
 6-pole stator with form wound windings.
 Copper alloy rotor bars and end rings.
 Class H insulation, robotically taped, Mica-Kapton system.
 Insulated non-drive end bearing.
 Double shaft extension. Hubs included on request. 1045 alloy steel ABS certified shaft.
 (3) 16 ft. long armored marine cables, 646 MCM. Connection lugs and connection box not included.
 (6) RTDs, 100-ohm platinum, two per phase embedded in stator slots, leads are not terminated.
 Separately ventilated – flanged inlet provided for forced ventilation, blower not included – 2800 scfm required.
 Drill motor is ATEX certified Ex e II T3, II 2 G c T3 by Sira, 09ATEX3076X.
 400-watt tape heaters (200-watts on each end of motor), connected at 240V and field convertible to 120V,
ATEX certified EEx e II, II 2 G.
 when motor is used in hazardous areas with approved Variable Frequency Drives (VFD).
 IECEx certification
 Motor enclosure: IP22; IP44 rating when fitted with additional ATEX approved components by drilling equipment OEM.
 Paint – Primer only. Final coat by others.
 Encoder, pressure sensor and discharge air handler are not included.
 Approximate weight: 6162 lb., 2795 kg.

5GEB20B is a standard vertical GE Drilling Motor that requires additional wiring, modifications and accessories to be
added by the user. This motor is not a direct replacement for an existing top drive. Top drive manufacturers make
modifications and/or additions to these motors prior to mounting. These modifications and/or additions are not
included in this equipment. GE recommends contacting the equipment manufacturer for replacement motors.

You might also like