Scribd
Upload
94 views3 pages

Sunrom 212189

This document provides information about a piezoelectric passive buzzer that is used for sound generation in consumer electronics. It operates on low power, produces minimal noise, and is driven externally by a signal source rather than an internal circuit. Key specifications include a size of 22.0x7.0x26.5mm, a sound pressure level of 70dB at 2kHz, an operating temperature range of -20°C to 70°C, and a maximum input voltage of ±12.5V. Frequency response charts and an example driving circuit are also shown.

Uploaded by

Rohan Deswal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
94 views3 pages

Sunrom 212189

This document provides information about a piezoelectric passive buzzer that is used for sound generation in consumer electronics. It operates on low power, produces minimal noise, and is driven externally by a signal source rather than an internal circuit. Key specifications include a size of 22.0x7.0x26.5mm, a sound pressure level of 70dB at 2kHz, an operating temperature range of -20°C to 70°C, and a maximum input voltage of ±12.5V. Frequency response charts and an example driving circuit are also shown.

Uploaded by

Rohan Deswal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

http://www.sunrom.

com

PIEZO PASSIVE BUZZER - VERTICAL

Externally driven piezoelectric sounders are used in washing machines, keyboard, timer, digital watches, electronic
calculators, telephones and other consumer equipment. They are driven by a signal (ex.: 2048Hz or 4096Hz) from an
LSI/MCU and provide melodious sound. Also, if the source is like a melody IC, you can also sound melody. Equivalent to
Murata PKM22EPTH2001-B0.

Features

1. Low power consumption


2. No noise and high reliability
3. No electric noise and little influence on peripheral circuits
4. It complies with the JEITA standard (RC - 8180A)

DIMENSIONS

PCB Holes we suggest of 3.2mm dia. with 12.5mm space apart

SPECIFICATIONS

Size 22.0×7.0×26.5 mm
Frequency 2 kHZ
Sound Pressure Level 70dB (min.)
Measure Condition of Sound Pressure Level [3.0Vp-p,2.0kHz,square wave,10cm]
Capacitance 19nF
Capacitance Tolerance ±30%
Measurement Condition of Capacitance [120Hz]
Maximum input voltage ±12.5Vo-p max. or 25.0Vo-p max
Operating Temperature Range -20℃ to 70℃
Storage Temperature Range -40℃ to 80℃
Shape Lead
Lead Shape Pin Type
Lead length Lead length:4.0mm
Drive Type External Drive
EIAJ Part Number PS-RP2-V27-20

Page 1 of 3
CHARTS

Figure 1 Frequency Characteristics (sine wave) Figure 2 Frequency Characteristics (square wave)

Figure 3 Typical Externally Driving circuit, Astable, NAND, Inverter gates

Page 2 of 3
NOTES

Please note, Unlike electromagnetic types which has coil, This buzzer does not contains internal driving circuit, so do not expect to just power on and hear something. It needs
square wave of 4Khz to drive. The black case provides cavity for resonance and protection. You can vary its frequency to create tones just like you hear from microwave or
washing machine.
When compared to low cost electromagnetic type buzzer this piezo consumes only 2-3mA, while coil type can take upto 100mA. Low current consumption makes it ideal for
battery operation. While electromagnetic type is high on EMI, this piezo's emi noise is very neglible.
Buzzer Comparison
Piezo Buzzer
Parameter Other Electromagnetic Coil Type
This model
Current 2-3mA 150-200mA
Moisture Proof Sensitive to moisture
Operation Life Long, No moving parts Coil heats and life is around 2 years
Operation Temp High upto 150 deg C approx 50 deg C
Noise Does not emit Emit high EMI noise over driving voltage
Technology Piezo Vibration Coil Oscillation
Frequency Variable 1-10Khz Fixed
You can use frequency from 1 Khz to 10 Khz but highest amplitude you will get around 4 Khz. Please see graph of frequency response above.
This is how we use it in our designs at Sunrom.

ORDERING DETAILS

Sunrom Part# Ordering Page


5288 http://www.sunrom.com/m/5288

Page 3 of 3

You might also like