QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Plug Gauge

Specification Ø62.0 ±0.03 mm

Part Name PIVOT SLEEVE REAR TWIST BEAM

Part No 544232406907

Gauge ID No. PG/SKEIPL/544232406907/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. Ø62.0 -0.03 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. Ø62.0 +0.03 mm DIGITAL VERNIER CALIPER

3 OVALITY 0.02 MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 52.0 ±0.1mm

Part Name PIVOT SLEEVE REAR TWIST BEAM

Part No 544232406907

Gauge ID No. LG/SKEIPL/F/544232406907

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 52.10 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 51.90 mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.1 MM MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Plug Gauge

Specification Ø18.7 TO Ø18.86 mm

Part Name SLEEVE - TOWER BODY MOUNT

Part No 544231606912

Gauge ID No. PG/SKEIPL/F/544231606912

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. Ø18.7 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. Ø18.86 mm DIGITAL VERNIER CALIPER

3 OVALITY 0.02 MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 61.20 TO 61.40 mm

Part Name SLEEVE - TOWER BODY MOUNT

Part No 544231606912

Gauge ID No. LG/SKEIPL/F/544231606912

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 61.40 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 61.20 mm DIGITAL VERNIER CALIPER

3 FLATNESS 0.3 MM MAX. DIGITAL HEIGHT

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type STEP PIN GAUGE

1ST PIN DIA.= Ø10.7 MM,

Specification
2ND PIN DIA= Ø13.7 MM

Part Name SLEEVE - THREADED M12

Part No 544231606911

Gauge ID No. SPG/SKEIPL/F/544231606911

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 1ST PIN DIA. Ø10.7 MM DIGITAL VERNIER CALIPER

2 2ND PIN DIA Ø13.7 MM DIGITAL VERNIER CALIPER

1ST STEP PIN

3 LENGTH 35.0MM DIGITAL VERNIER CALIPER

2ND STEP PIN

4 40.0 MM DIGITAL VERNIER CALIPER
LENGTH
HOLE
5 0.3MAX. DIGITAL HEIGHT GAUGE
CONCENTRICITY

FREE FROM DENT

6 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type PIN GAUGE

Specification Ø18.3 TO Ø18.5 mm

Part Name SLEEVE - BIW MTG. TOWER

Part No 544231606907

Gauge ID No. PG/SKEIPL/544231606907/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. Ø18.35 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. Ø18.50 mm DIGITAL VERNIER CALIPER

3 OVALITY 0.02 MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 39.50mm TO 39.70 mm

Part Name SLEEVE - BIW MTG. TOWER

Part No 542731606907

Gauge ID No. LG/SKEIPL/ 542731606907/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 39.70 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 39.50 mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.1 MM MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type PIN GAUGE

Specification Ø18.3 TO Ø18.5 mm

Part Name SLEEVE - REAR BIW MTG.

Part No 542731606908

Gauge ID No. PG/SKEIPL/542731606908/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. Ø18.3 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. Ø18.5 mm DIGITAL VERNIER CALIPER

3 OVALITY 0.02 MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 33.60mm TO 33.80 mm

Part Name SLEEVE - REAR BIW MTG.

Part No 542731606908

Gauge ID No. LG/SKEIPL/542731606908/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 33.80 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 33.60mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.1 MM MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 56.1±0.1MM

Part Name SLEEVE - (R & P MTG.)

Part No 542731606909

Gauge ID No. LG/SKEIPL/542731606909/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 56.20 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 56.00mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.1 MM MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type STEP PIN GAUGE

1ST PIN DIA.= Ø13.86/85 MM,

Specification
2ND PIN DIA= Ø10.66/67 MM

Part Name SLEEVE - (R & P MTG.)

Part No 542731606909

Gauge ID No. SPG/SKEIPL/542731606909/ FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 1ST PIN DIA. Ø13.86/85 MM DIGITAL VERNIER CALIPER

2 2ND PIN DIA Ø10.66/67 MM DIGITAL VERNIER CALIPER

3 1ST STEP PIN 12.0MM DIGITAL VERNIER CALIPER

LENGTH
2ND STEP PIN
4 23.6 MM DIGITAL VERNIER CALIPER
LENGTH
HOLE
5 0.3MAX. DIGITAL HEIGHT GAUGE
CONCENTRICITY

FREE FROM DENT

6 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type PLUG GAUGE - 1

Specification Ø64.20 TO Ø64.30 mm

Part Name CAMBER PLATE- REAR

Part No 544232408253

Gauge ID No. PG-1 /SKEIPL/544232408253/IP

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. Ø64.20 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. Ø64.30 mm DIGITAL VERNIER CALIPER

3 OVALITY 0.05 MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type PLUG GAUGE - 2

Specification Ø64.20 TO Ø64.30 mm

Part Name CAMBER PLATE- REAR

Part No 544232408253

Gauge ID No. PG-2 /SKEIPL/544232408253/IP

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. Ø64.20 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. Ø64.30 mm DIGITAL VERNIER CALIPER

3 OVALITY 0.05 MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Relation Checking Gauge- 1

Specification Ø64.00 +0.3/0.2 mm Bore To 04 Mounting Hole Ø8.5 CD

Part Name CAMBER PLATE- REAR

Part No 544232408253

Gauge ID No. RCG-1 /SKEIPL/544232408253/IP

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 MOUNTING PLUG Ø64.20 - Ø64.30 DIGITAL VERNIER CALIPER

DIAMETER mm

2 04 NOS. PIN Ø8.5 mm DIGITAL VERNIER CALIPER

DIAMETER

3 HOLE CD - 1 76.0±0.1 MM DIGITAL HEIGHT GAUGE

4 HOLE CD - 2 50.0±0.1 MM DIGITAL HEIGHT GAUGE

5 HOLE CD - 3 72.0±0.1 MM DIGITAL HEIGHT GAUGE

OVALITY OF MTG.
3 0.05 MAX. DIGITAL VERNIER CALIPER
PLUG & PIN

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Relation Checking Gauge- 2

Specification Ø64.00 +0.3/0.2 mm Bore To 04 Mounting Hole Ø8.5 CD

Part Name CAMBER PLATE- REAR

Part No 544232408253

Gauge ID No. RCG-2 /SKEIPL/544232408253/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 MOUNTING PLUG Ø64.20 - Ø64.30 DIGITAL VERNIER CALIPER

DIAMETER mm

2 04 PIN DIAMETER Ø8.5 mm DIGITAL VERNIER CALIPER

3 HOLE CD - 1 76.0±0.1 MM DIGITAL HEIGHT GAUGE

4 HOLE CD - 2 50.0±0.1 MM DIGITAL HEIGHT GAUGE

5 HOLE CD - 3 72.0±0.1 MM DIGITAL HEIGHT GAUGE

OVALITY OF MTG.
6 0.05 MAX. DIGITAL VERNIER CALIPER
PLUG & PIN

FREE FROM DENT

7 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 54.3 ±0.2MM

Part Name SPACER EXTENSION LONG MEMBER

Part No 541261103401

Gauge ID No. LG/SKEIPL/541261103401/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 54.50 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 54.10mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.1 MM MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 68.0 ±0.5MM

Part Name SLEEVE -RPS MTG.

Part No 541231603402

Gauge ID No. LG/SKEIPL/541231603402/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 68.50 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 67.50mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.1 MM MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL/QAD/F-28 Rev 00)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type PLUG GAUGE

Specification Ø15.0 +0.2MM

Part Name SLEEVE -RPS MTG.

Part No 541231603402

Gauge ID No. PG/SKEIPL/541231603402/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. Ø15.00 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. Ø15.20 mm DIGITAL VERNIER CALIPER

3 OVALITY 0.05 MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28, Rev 00)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 17.5 ±0.2 MM

Part Name SLEEVE -LCA MTG. FRT.

Part No 541231603401

Gauge ID No. LG/SKEIPL/541231603401/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 17.70 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 17.30mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.1 MM MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type PLUG GAUGE

Specification Ø17.0 ±0.2MM

Part Name SPACER

Part No 541261103402

Gauge ID No. PG/SKEIPL/541261103402/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. Ø16.80 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. Ø17.20 mm DIGITAL VERNIER CALIPER

3 OVALITY 0.05 MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type PLUG GAUGE

Specification Ø14.5 +0.2/-0.0 MM

Part Name SLEEVE PINTLE HOOK CS MBR RR

Part No 0204ABH00070N

Gauge ID No. PG/SKEIPL/0204ABH00070N/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. Ø14.50 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. Ø14.70 mm DIGITAL VERNIER CALIPER

3 OVALITY 0.05 MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 148.0 ±0.5 MM

Part Name ROD SHOCK ABSORBER REAR

Part No 0208ABC00700N

Gauge ID No. LG/SKEIPL/0208ABC00700N/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 148.50 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 147.50mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.1 MM MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 26.1 +0.5/-0.0 MM

Part Name FLCA -SLEEVE

Part No 0201AAL07900N

Gauge ID No. LG/SKEIPL/0201AAL07900N/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 26.60 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 26.10 mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.10mm MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 17.50 ±0.2 MM

Part Name SLEEVE- LCA Mtg. Frt.

Part No 541231603401

Gauge ID No. LG/SKEIPL/541231603401/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 17.70 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 17.30mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.10mm MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 54.0 +0.2 /-0.0

Part Name SLEEVE ('C' MTG)

Part No 542731606906

Gauge ID No. SKEIPL/LG/542731606906/IP

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 54.20MM DIGITAL VERNIER CALIPER

2 NOGO Dim. 54.00MM DIGITAL VERNIER CALIPER

3 PARALLISIM 0.10mm MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 73.0±0.2MM

Part Name SLEEVE ENGINE M12

Part No 541261106701

Gauge ID No. SKEIPL/LG/541261106701/IP

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 73.20MM DIGITAL VERNIER CALIPER

2 NOGO Dim. 72.80MM DIGITAL VERNIER CALIPER

3 PARALLISIM 0.10mm MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 61.20 TO 61.40MM

Part Name SLEEVE TOWER BODY MOUNT

Part No 544231606912

Gauge ID No. SKEIPL/LG/544231606912/IP

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 61.40 MM DIGITAL VERNIER CALIPER

2 NOGO Dim. 61.20 MM DIGITAL VERNIER CALIPER

3 PARALLISIM 0.10mm MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 77.5 -0.2 MM

Part Name SLEEVE THREADED M-12

Part No 5442 3160 6911

Gauge ID No. SKEIPL/LG/5442 3160 6911/IP

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 77.50 MM DIGITAL VERNIER CALIPER

2 NOGO Dim. 77.30MM DIGITAL VERNIER CALIPER

3 PARALLISIM 0.10mm MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 56.1±0.1MM

Part Name SLEEVE - (R & P MTG.)

Part No 542731606909

Gauge ID No. SKEIPL/LG/542731606909/IP

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 56.20 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 56.00mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.1 MM MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 148.0 ±0.5 MM

Part Name ROD SHOCK ABSORBER REAR

Part No 0208ABC00700N

Gauge ID No. SKEIPL/LG/0208ABC00700N/IP

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 148.50 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 147.50mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.1 MM MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 31.0±0.1 MM

Part Name SLEEVE ENGINE MOUNT

Part No 0203ABC00620N

Gauge ID No. SKEIPL/LG/0203ABC00620N/IP

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 31.10mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 30.90mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.1 MM MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 54.3 ±0.2MM

Part Name SPACER EXTENSION LONG MEMBER

Part No 541261103401

Gauge ID No. SKEIPL/LG/541261103401/IP

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 54.50 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 54.10mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.1 MM MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 33.60mm TO 33.80 mm

Part Name SLEEVE - REAR BIW MTG.

Part No 542731606908

Gauge ID No. SKEIPL/LG/542731606908/IP

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 33.80 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 33.60mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.1 MM MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 16.5±0.2MM

Part Name SPACER

Part No 5412161103402

Gauge ID No. SKEIPL/LG/5412161103402/IP

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 16.70 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 16.30mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.1 MM MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 17.50 ±0.2 MM

Part Name SLEEVE- LCA Mtg. Frt.

Part No 541231603401

Gauge ID No. SKEIPL/LG/ 541231603401/IP

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 17.70 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 17.30mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.10mm MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 30.0 ±0.50 MM

Part Name SLEEVE BRKT COIL SPRING DOME

Part No 0208ABH00430N

Gauge ID No. SKEIPL/LG/ 0208ABH00430N/IP

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 30.50 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 29.50mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.10mm MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 68.0 ±0.20MM

Part Name SLEEVE -RPS MTG.

Part No 541231603402

Gauge ID No. SKEIPL/LG/541231603402/IP

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 68.20 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 67.80mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.1 MM MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 26.1 +0.5/-0.0 MM

Part Name FLCA -SLEEVE

Part No 0201AAL07900N

Gauge ID No. SKEIPL/LG/0201AAL07900N/IP

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 26.60 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 26.10 mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.10mm MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 66.7 ±0.2MM

Part Name BUSH SHACKLE RR

Part No 0201AAR01470N

Gauge ID No. SKEIPL/LG/0201AAR01470N/IP

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 66.90 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 66.50 mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.10mm MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type PLUG GAUGE

Specification Ø35.0 TO Ø35.20MM

Part Name BUSHING SPRING SHACKLE RETAINER

Part No 0401AA1000N

Gauge ID No. PG/SKEIPL/0401AA1000N/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. Ø35.00 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. Ø35.20 mm DIGITAL VERNIER CALIPER

3 OVALITY 0.05 MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type PLUG GAUGE

Specification Ø54.0 H7

Part Name BUSH SLEEVE

Part No 541232416904

Gauge ID No. PG/SKEIPL/541232416904/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. Ø53.980 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. Ø54.030 mm DIGITAL VERNIER CALIPER

3 OVALITY 0.05 MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 100.7 +0.2 /0.0 MM

Part Name SLEEEVE CROSS MBR. TRANS AT

Part No 0201ABH00800N

Gauge ID No. LG/SKEIPL/0201ABH00800N/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 100.90 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 100.70 mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.10mm MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 88.8 +0.5 /0.0 MM

Part Name SLEEEVE PINTLE HOOK CS MBR RR

Part No 0204ABH00070N

Gauge ID No. LG/SKEIPL/0204ABH00070N/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 89.30 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 88.80 mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.10mm MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 66.7 ±0.5 MM

Part Name BUSHING SPRING SHACKLE RETAINER

Part No 0401AA1000N

Gauge ID No. LG/SKEIPL/0401AA1000N/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 67.30 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 66.10 mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.10mm MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type PLUG GAUGE

Specification Ø19.0 +0.4/-0.0 mm

Part Name SLEEVE MTG.REAR FRAME REAR RH FWD.

Part No 0101GAW00070N

Gauge ID No. PG/SKEIPL/0101GAW00070N/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. Ø19.0 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. Ø19.4 mm DIGITAL VERNIER CALIPER

3 OVALITY 0.05 MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type PLUG GAUGE

Specification Ø22.0 +0.4/-0.0 mm

Part Name SLEEVE MTG.REAR FRAME FRT. FWD.

Part No 0101GAW00060N

Gauge ID No. PG/SKEIPL/0101GAW00060N/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. Ø22.0 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. Ø22.40 mm DIGITAL VERNIER CALIPER

3 OVALITY 0.05 MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type SLOT QUALIFYING GAUGE

Specification (23.0 X19.0) +0.4 MM

Part Name SLEEVE MTG.REAR FRAME REAR LH FRT.

Part No 0101GAW00080N

Gauge ID No. PG/SKEIPL/0101GAW00080N/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. (23.0 X19.0)+0.4 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. - DIGITAL VERNIER CALIPER

3 OVALITY - DIGITAL VERNIER CALIPER

4 VISUAL CHECKS FREE FROM DENT & VISUAL

DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type HOLE QUALIFYING GAUGE

Specification 26.0 ±0.2MM

Part Name PIVOT SLEEVE RTB

Part No 287132406906

Gauge ID No. QG/SKEIPL/287132406906/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 HOLE DIM. Ø8.20 TO Ø8.50 MM DIGITAL VERNIER CALIPER

2 PIN DIM. Ø8.0 -0.1MM DIGITAL VERNIER CALIPER

3 OVALITY OF HOLE 0.1 MAX DIGITAL VERNIER CALIPER

4 VISUAL CHECKS FREE FROM DENT & VISUAL

DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 32.0 ±0.2 MM

Part Name SLEEVE

Part No 0401BAA12530N- ITEM-3

Gauge ID No. LG/SKEIPL/0401BAA12530N/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 32.20 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 31.80 mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.10mm MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type PLUG GAUGE

Specification Ø41.32 TO Ø41.50 mm

Part Name SLEEVE

Part No 0401BAA12530N- ITEM-3

Gauge ID No. PG/SKEIPL/0401BAA12530N/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. Ø41.32 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. Ø41.50 mm DIGITAL VERNIER CALIPER

3 OVALITY 0.05 MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type PLUG GAUGE

Specification Ø41.32 TO Ø41.50 mm

Part Name SLEEVE

Part No 0401BAA12530N- ITEM-3

Gauge ID No. PG/SKEIPL/0401BAA12530N/IP

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. Ø41.32 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. Ø41.50 mm DIGITAL VERNIER CALIPER

3 OVALITY 0.05 MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 42.0 ±0.2 MM(41.8 - 42.20mm)

Part Name SLEEVE ARM LOWER CONTROL

Part No 0401BAA12230N- ITEM-4

Gauge ID No. LG/SKEIPL/0401BAA12230N/IP

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 42.20 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 41.80 mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.10mm MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 42.0 ±0.4 MM(41.60 - 42.40mm)

Part Name SLEEVE ARM LOWER CONTROL

Part No 0401BAA12230N- ITEM-4

Gauge ID No. LG/SKEIPL/0401BAA12230N/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 42.40 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 41.60 mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.10mm MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type PLUG GAUGE

Specification Ø49.92 TO Ø50.10 mm

Part Name SLEEVE ARM LOWER CONTROL

Part No 0401BAA12230N- ITEM-4

Gauge ID No. PG-1/SKEIPL/0401BAA12230N/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. Ø49.92 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. Ø50.10 mm DIGITAL VERNIER CALIPER

3 OVALITY 0.05 MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type PLUG GAUGE

Specification Ø49.92 TO Ø50.10 mm

Part Name SLEEVE ARM LOWER CONTROL

Part No 0401BAA12230N- ITEM-4

Gauge ID No. PG-2/SKEIPL/0401BAA12230N/IP

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. Ø49.92 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. Ø50.10 mm DIGITAL VERNIER CALIPER

3 OVALITY 0.05 MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 33.0 ±0.2 MM(32.80 / 33.20 mm)

Part Name METAL SLEEVE

Part No 0401BAA12640N- ITEM-3

Gauge ID No. LG-1/SKEIPL/0401BAA12640N/IP

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 33.20 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 32.80 mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.10mm MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 33.0 ±0.40 MM(32.60 / 33.40 mm)

Part Name METAL SLEEVE

Part No 0401BAA12640N- ITEM-3

Gauge ID No. LG-2/SKEIPL/0401BAA12640N/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 33.40 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 32.60 mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.10mm MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type PLUG GAUGE

Specification Ø35.72 TO Ø35.90 mm

Part Name METAL SLEEVE

Part No 0401BAA12640N- ITEM-3

Gauge ID No. PG-1/SKEIPL/0401BAA12640N/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. Ø35.72 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. Ø35.90 mm DIGITAL VERNIER CALIPER

3 OVALITY 0.05 MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type PLUG GAUGE

Specification Ø35.72 TO Ø35.90 mm

Part Name METAL SLEEVE

Part No 0401BAA12640N- ITEM-3

Gauge ID No. PG-2/SKEIPL/0401BAA12640N/IP

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. Ø35.72 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. Ø35.90 mm DIGITAL VERNIER CALIPER

3 OVALITY 0.05 MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type PLUG GAUGE

Specification Ø40.22 TO Ø40.40 mm

Part Name METAL SLEEVE KNUCKLE SIDE

Part No 0401BAA12640N- ITEM-4

Gauge ID No. PG-1/SKEIPL/0401BAA12640N/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. Ø40.22 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. Ø40.40 mm DIGITAL VERNIER CALIPER

3 OVALITY 0.05 MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type PLUG GAUGE

Specification Ø40.22 TO Ø40.40 mm

Part Name METAL SLEEVE KNUCKLE SIDE

Part No 0401BAA12640N- ITEM-4

Gauge ID No. PG-2/SKEIPL/0401BAA12640N/IP

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. Ø40.22 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. Ø40.40 mm DIGITAL VERNIER CALIPER

3 OVALITY 0.05 MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 52.80 ±0.2 MM(52.60/ 53.00 mm)

Part Name SLEEVE BUSH CROS MBR.

Part No 0201ABJ00050N- I-3

Gauge ID No. LG-1/SKEIPL/0201ABJ00050N- I-3/IP

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 53.00 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 52.60 mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.10mm MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 52.80 ±0.2 MM(52.60/ 53.00 mm)

Part Name SLEEVE BUSH CROS MBR.

Part No 0201ABJ00050N- I-3

Gauge ID No. LG-2/SKEIPL/0201ABJ00050N- I-3/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 53.00 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 52.60 mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.10mm MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type PLUG GAUGE

Specification Ø55.32 TO Ø55.50 mm

Part Name SLEEVE BUSH CROS MBR.

Part No 0201ABJ00050N, I-3

Gauge ID No. PG-1/SKEIPL/0201ABJ00050N, I-3/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. Ø55.32mm DIGITAL VERNIER CALIPER

2 NOGO Dim. Ø55.50 mm DIGITAL VERNIER CALIPER

3 OVALITY 0.05 MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type PLUG GAUGE

Specification Ø55.32 TO Ø55.50 mm

Part Name SLEEVE BUSH CROS MBR.

Part No 0201ABJ00050N, I-3

Gauge ID No. PG-2/SKEIPL/0201ABJ00050N, I-3/IP

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. Ø55.32mm DIGITAL VERNIER CALIPER

2 NOGO Dim. Ø55.50 mm DIGITAL VERNIER CALIPER

3 OVALITY 0.05 MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 71.00 ±0.2 MM(70.80/ 71.20 mm)

Part Name SLEEVE TRANS BUSH

Part No 0201ABJ00050N- I-4

Gauge ID No. LG-1/SKEIPL/0201ABJ00050N- I-4/IP

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 71.20 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 70.80 mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.10mm MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 71.00 ±0.40 MM(70.60/ 71.40 mm)

Part Name SLEEVE TRANS BUSH

Part No 0201ABJ00050N- I-4

Gauge ID No. LG-2/SKEIPL/0201ABJ00050N- I-4/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 71.40 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 70.60 mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.10mm MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 40.00 ±0.2 MM(39.80/ 40.20 mm)

Part Name

Part No 0401BBC01040N- I-3

Gauge ID No. LG-1/SKEIPL/0401BBC01040N- I-3 /IP

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 40.20 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 39.80 mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.10mm MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type Length Gauge

Specification 40.00 ±0.2 MM(39.80/ 40.20 mm)

Part Name SLEEVE LCA FRT.

Part No 0401BBC01040N- I-3

Gauge ID No. LG-2/SKEIPL/0401BBC01040N- I-3 /FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. 40.20 mm DIGITAL VERNIER CALIPER

2 NOGO Dim. 39.80 mm DIGITAL VERNIER CALIPER

3 PARALLISIM 0.10mm MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type PLUG GAUGE

Specification Ø67.80 TO Ø68.20 mm

Part Name METAL BUSH LCA FRT

Part No 0401BAA05500N

Gauge ID No. PG/SKEIPL/0401BAA05500N/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. Ø68.0mm DIGITAL VERNIER CALIPER

2 NOGO Dim. Ø68.20 mm DIGITAL VERNIER CALIPER

3 OVALITY 0.05 MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)
 QUALIFYING GAUGE VALIDATION REPORT

Gauge Type PLUG GAUGE

Specification Ø49.90 +0.16MM

Part Name SLEEVE BALL JOINT FRNT LCA

Part No 0401BAA05490N

Gauge ID No. PG/SKEIPL/0401BAA05490N/FI

PHOTO

ACCEPTED /
SR NO. PARAMETER SPECIFIED DIM. MEASUREMENT METHOD ACTUAL DIM. NOT NEXT DUE DATE OF VALIDATION
ACCEPTED

1 GO dim. Ø50.0mm DIGITAL VERNIER CALIPER

2 NOGO Dim. Ø50.06 mm DIGITAL VERNIER CALIPER

3 OVALITY 0.05 MAX. DIGITAL VERNIER CALIPER

FREE FROM DENT

4 VISUAL CHECKS VISUAL
& DAMAGES

Remark if any

Prepared By- Approved By-

(SKEIPL-QAD-F-28)