Scribd
Upload
373 views2 pages

Manual de Usuario Samsung WW70J4463GW (Español - 14 Páginas)

1. The document provides instructions for installing, leveling, and cleaning a washing machine. It describes adjusting the levelling legs to ensure the machine is stable on uneven floors. 2. Instructions are given for cleaning the debris filter and drain tube when water will not drain properly. This involves opening the filter cover, unscrewing the drain cap, and allowing water to drain out. 3. The user is advised to clean the water supply filter by removing and cleaning the filter net and replacing it securely.

Uploaded by

matiasbaldi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
373 views2 pages

Manual de Usuario Samsung WW70J4463GW (Español - 14 Páginas)

1. The document provides instructions for installing, leveling, and cleaning a washing machine. It describes adjusting the levelling legs to ensure the machine is stable on uneven floors. 2. Instructions are given for cleaning the debris filter and drain tube when water will not drain properly. This involves opening the filter cover, unscrewing the drain cap, and allowing water to drain out. 3. The user is advised to clean the water supply filter by removing and cleaning the filter net and replacing it securely.

Uploaded by

matiasbaldi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Cleaning the debris filter

useful tips for your drum washing machine ✔ When water does not drain well or ‘5E’ blinks on the display
may differ from your washing machine. (However, the cleani
1. Open the filter
✔ The descriptions and images in this document may differ from your actual
cover using a coin
purchased product. For more information, refer to the user manual.
or a key.

INSTALLING YOUR WASHING MACHINE


• Installing your washing machine in the location which is slippery 2. Unscrew the
or uneven, will result in vibrations and noise. emergency drain
• If there is too much noise or vibration, check whether the four cap and pull out t
levelling adjustment legs are evenly and firmly on the floor. emergency drain
• If the washing machine is not level, lift the washing machine tube to drain off t
slightly and adjust the lowest of the four levelling adjustment legs. remaining water.
✔ Before using your washing machine, you must remove the Make sure that the leveling feet
legs are level with the floor.
shipping bolts from the back of the unit. 3. Hold the cap on
For more information on removing the safety devices, refer to the user manual. the end of the
emergency drain
LEVELLING YOUR WASHING MACHINE WITH THE LEVELLING FEET tube and allow all
the water to flow
✔ Refer to the descriptions appropriate to your washing machine. into a bowl.

Locking nut
✔ If you open the debris filter when water remains inside the tu
Adjustable nut ✔ If the debris filter is assembled incorrectly or not installed, it
Spanner
1. Level your washer by turning the 2. When your washing machine is Therefore make sure to assemble it correctly.
(-) Driver
adjustable nut in and out, as shown level, tighten the locking nut using
in the figure. the (-) driver. MAKE SURE YOU KNOW...
Adding the • Adding laundry
Nut
laundry ➲ Press the Add laundry(Stop&Add) bu
Adjustable feet laundry lamp turns on.
Spanner 1. Unfasten the locking 2. Level your washing 3. Fasten the locking • If you add the laundry during a spin cyc
nut by turning it to the machine by turning nut by turning it to the regardless of the remaining time.
left using a spanner. the adjustable feet in right using a spanner.
and out as necessary
by hand. Washing • Wash bedding using only the Bedding c
bedding ➲ You can wash acrylic, mixed spinning
CLEANING THE FILTER ➲ When washing general clothes, the w
not operate in the optimal status.
Cleaning the water supply filter • Wash only one bedding item at a time re
✔ If the filter net is not installed, it may cause a water leakage and operating error. Make sure to install it. ➲ Insert bedding rolled up into a ball.
The center of gravity is distributed eve
vibrations and noise.
✔ Do not wash electric blankets or carpet
✔ When spinning blankets, cotton bedding
too much noise and vibrations may occ
be completed as spinning is not perform
1. Pull and remove the filter net. 2. Clean the filter. 3. Insert the filter net and fasten
its connector firmly.

DC68-02209B_EN_DE_FR_ES_IT_PT_RU.indd 1 2008-03-19 ¿ÀÈÄ 3:03:50

You might also like