TECHNICAL DATA SHEET FLOWMORE Doc. No. SALE 22085806 - 110 Rev.

03
OWNER : M/s. THDC INDIA LIMITED
CONSULTANT 1 : M/s NTPC LIMITED
CONSULTANT 2 : ENGINEERING PROJECTS (INDIA) LTD
CONTRACTOR :- M/s GAJA ENGINEERING PRIVATE LIMITED,
PROJECT: - KHURJA SUPER THERMAL POWER PROJECT (2 x 660 MW)
PACKAGE : WATER TREATMENT PLANT & MISCELLANEOUS PACKAGE
SUB PACKAGE : DEMINERALISATION PLANT (UF-RO BASED)

DESCRIPTION: EFFLUENT DISPOSAL PUMPS WATER RECIRCULATION CUM

DISPOSAL PUMP
PUMP DOCUMENTS AGAINST WO NO SALE 22085806-110

1. PUMP DATA SHEET

2. PERFORMANCE CURVE OF PUMP
3. GA DRAWING OF PUMP
4. CS DRAWING OF PUMP

MOTOR DOCUMENTS AGAINST WO NO SALE 22085806-110

1. MOTOR DATA SHEET

2. GA DRAWING OF MOTOR
3. CURVE OF MOTOR
 TECHNICAL DATA SHEET FLOWMORE Doc. No. SALE 22085806 - 110 Rev. 03
OWNER : M/s. THDC INDIA LIMITED
CONSULTANT 1 : M/s NTPC LIMITED
CONSULTANT 2 : ENGINEERING PROJECTS (INDIA) LTD
CONTRACTOR :- M/s GAJA ENGINEERING PRIVATE LIMITED,
PROJECT: - KHURJA SUPER THERMAL POWER PROJECT (2 x 660 MW)
PACKAGE : WATER TREATMENT PLANT & MISCELLANEOUS PACKAGE
SUB PACKAGE : DEMINERALISATION PLANT (UF-RO BASED)
S. No Description
General Information:
1. Application Effluent Disposal Pump
2. Location Demineralization Plant (UF-RO Based)
3. Duty Continuous
4. Operation Direct Online
5. Quantity 3 Nos. (2W + 1S)
6. Liquid Effluent (Acid + alkali)
7. Specific Gravity of Liquid 1.05
8. Min Temperature (Deg. C) 25 Deg.C
9. Max Temperature (Deg. C) 70 Deg.C
10. Pump Design & Testing Standard IS 5120 / IS 5639 / HIS
Specifications:
11. Pump Make FLOWMORE
12. Pump Type /Split Type Horizontal End Suction Pump / Radially Split
13. Flange Connection Flanged
14. Suction Condition From Priming Chamber
15. Pump Model / Stage 5623 (S.O) 80 X 50
16. No. of Stage Single
17. Operating Speed of the Pump 2945 rpm
18. Max Speed of Pump 3000 rpm (Motor Synchronous Speed)
19. Full Load Speed of Motor 2945 rpm
3
20. Capacity (M /Hr.) each 75.0 M³/Hr.
21. Head (Mtr.) 60.0 M
22. Shut Off Head (Mtr.) 66.8 M.
23. Pump Efficiency 73.5 %
24. Pump Input (BKW) 17.51 KW (S.G 1.05)
25. Power (BKW) at Shut bf Head 9.4 KW
Maxm. Power (BKW) for operating
26. 19.4 KW
range 40 To 120% of Flow
Maxm. Power (BKW) for entire
27. 21.0 KW
operating range for rated Impeller
28. Motor Rating at 50 Deg.C 22 KW / 2P
29. Motor Type TEFC / Horizontal Induction Motor / IE3
30. Type of Bearing Lubrication Grease
 31. Type of Impeller Semi Open
32. Pump Design. Temperature Degree C 70 Deg. C
33. Motor Mounting Details Foot Mounted
3
34. Minm. Safe Flow (M /Hr.) 30
35. Frame Size of Motor 180M
36. Cooling Arrangement NR
37. Type of Pump Motor Coupling Flexible (Rathi / Shakti / Equ.)
38. Flange Drilling Standard ANSI B 16.5
39. NPSHR (At duty point) 3.3 M.
40. Operation Range 40% to 120% of rated Flow
41. Discharge Size of Pump 50 mm
42. GD2 value 0.11 Kg.M2
43. End Connection Flanged
44. Noise Level 85 dBA at 1 M
45. Vibration Level 75 Microns
Antifriction (SKF / FAG) /Service Life : 16000
46. Bearing Type / Make / Service Life
Hrs.
The specific Speed of Pump Metric
47. 19.72
Units
48. Critical Speed of the Pump 130% of operating speed of Pump
Pump will be capable of starting with
discharge valve fully open and close Yes. Power Required valued indicated in S.no.25
49.
conditions and indicate the power & 26 respectably.
required under these conditions.
Casing vent and drain with piping &
50. Provided
Valves Provided
Connections for suction and discharge
51. pressure gauge in Pump casing to be Provided refer Pump GA Drawing
provided.
Please confirm that shaft sleeves are
52. Sleeves are Renewable Type
renewable type.
Material of Construction
53. Casing / Bowl Duplex S.S ( ASTM A 890 Gr. 4A)
54. Impeller Duplex S.S ( ASTM A 890 Gr. 4A)
Casing/Bowl Wearing Ring (Front & back
55. Side)
Duplex S.S ( ASTM A 890 Gr. 4A)
56. Pump Shaft ASTM A276, UNS 531803 Duplex SS
57. Shaft Sleeve ASTM A276, UNS 531803 Duplex SS
FACES SiC vs SiC (OUTSIDE MOUNTED
58. Type of Sealing
MECHANICAL SEAL)
59. Stuffing Box (Back Head) Duplex S.S ( ASTM A 890 Gr. 4A)

60. Gland Duplex S.S ( ASTM A 890 Gr. 4A)

SS 316 Coming in contact with Liquid and HTS
61. Bolts & Nuts
for non- wetted.
62. Base Plate M.S Fab. (IS:2062) (Epoxy painted)
 1. Base Plate, Coupling ,Coupling Guard &
Foundation Bolts shall be Provided by
M/s Flowmore
2. Companion flanges with nuts, bolts and
Gasket, positioning Dowels etc. covered
63. Accessories to Provided in M/s GEPL Scope
3. Internal piping with valves filter &
Instruments for Sealing/ cooling/
Lubrication system upto and including
isolating Valves etc – covered in M/s
GEPLscope.

NOTE:

1) Inspection & Testing shall be as per M/s NTPC approved QAP.

FLOWMORE LIMITED
PERFORMANCE CURVE

80
70
60
HEAD (M)

50
40
30
20
10
0
0 20 40 60 80 100 120

CAPACITY (M³/Hr.)

25

20
BKW (KW)

15

10

0
0 20 40 60 80 100 120

CAPACITY (M³/Hr.)

90
80
70
Efficiency %

60
50
40
30
20
10
0
0 20 40 60 80 100 120

CAPACITY (M³/Hr.)

9
8
7
6
NPSHR (M)

5
4
3
2
1
0
0 20 40 60 80 100 120
CAPACITY (M³/Hr.)

Project : KHURJA SUPER THERMAL POWER PROJECT ( 2 x 660 MW) WO NO SALE 22085806 - 110
Package : Water Treatment Plant & Miscellaneous Package OWNER : THDC India Limited Contractor:- Gaja Engineering Pvt. Ltd.
Consultant 1 : NTPC Ltd. / Consultant 2 : Engineering Projects (India) Ltd Sub Package Demmineralisation Plant (UF-RO Series)
Model 5623 (S.O) 80 x 50
Description : Effluent Disposal Pump Pump Input w Water : 16.67 Kw
Capacity 75.0 M³/Hr. Pump Input w Liquid :17.51 Kw (S.G 1.05)
Head 60.0 Mtrs NPSHR 1.6 Mtr
SOH 66.8 Mtrs Speed 2945 rpm
Efficiency 73.5 % Motor Rating 22 KW
 FLANGE DETAIL AS PER ANSI B16.5, 150 LBS,
75 500 500 75
SUCTION:------ 80 N.B. DISCHARGE:---- 50 N.B.
FLANGE O.D.:--- 190.5 FLANGE O.D.:--- 152.4
P.C.D.:--------- 152.4 P.C.D.:--------- 120.7
NO. OF. HOLES:- 4 NO. OF. HOLES:- 4
DISCH.C
L DIA OF BOLTS:- M16 DIA OF BOLTS:- M16

175
SUCT.CL
(TOP) FOUNDATION PLAN CD CASING DRAIN 1/2" B.S.P.
GD GLAND DRAIN 1/2" B.S.P.

350
CG COMPOUND GAUGE 3/8" B.S.P.
PG PRESSURE GAUGE 3/8" B.S.P.
35 `X'
6 NOS.~FOUNDATION BOLT
`L' TYPE SIZE:-M16-2Px250 Long

35
485 100 700
Vent Conn.
Pipe with Valve POCKET
75 SQ.

250
100
PG DISCHARGE

FLEX. SPACER
TYPE COUPLING
24

19
DETAIL-`X'

200
'M'
CG

SUCTION

180

160
Casing Drain
Pipe with Valve

82
GD

50

100
'M'

TO BE GROUTED
1150 AFTER, LEVELING
400
& FASTENING
OF SKID BASE VIEW `M'-`M'

NOTE:-
2 CHANGE AS PER COMMENTS SUNIL 01.02.2023
1. DIMENSIONS ARE IN MM. UNLESS OTHERWISE SPECIFIED. 1 CHANGE AS MARKS SUNIL 22.11.2022
2. DIRECTION OF PUMP ROTATION:- COUNTER CLOCK WISE, WHEN LOOKING FROM DRIVING END. Rev.No. REVISION SIGN DATE
3. STATIC LOAD (PUMP SET WITH MOTOR) = 360 Kgs. (Approx). JOB NAME :- EFFLUENT (PS 1).,
4. DYNAMIC LOAD (PUMP SET WITH MOTOR) = 450 Kgs. (Approx). OWNER :- M/s. THDC INDIA LIMITED
CONSULTANT 1:- M/s NTPC LIMITED
MOTOR PARTICULARS PUMP PARTICULARS (QTY.:- 03 Nos.) CONSULTANT 2:- ENGINEERING PROJECTS (INDIA) LTD
CONTRACTOR :- M/s GAJA ENGINEERING PRIVATE LIMITED,
MAKE FIG.
-- LHP -- 5623 (S.O.) PROJECT :- KHURJA SUPER THERMAL POWER PROJECT (2x660 MW)
FRAME SIZE
-- 180M -- 80x50 (3"x2") PACKAGE :- WATER TREATMENT PLANT & MISCELLANEOUS PACKAGE
STAGE -- SINGLE SUB PACKAGE :- DEMINERALISATION PLANT (UF-RO BASED)
POWER -- 22K.W. ORDER NO. :- Later On., DT.:-22.08.2022
SPEED -- 2945 R.P.M.
SPEED -- 2945 R.P.M. GENERAL ARRANGEMENT DRAWING NAME DATE
CAPACITY -- 75 (Cu. M /Hr.) DRN. SUNIL 13.09.2022
HEAD -- 60 Mtr. FOR SCALE CHD. D.K.S. 13.09.2022
PHASES -- THREE PUMP INPUT -- 17.51 K.W. HORIZONTAL END SUCTION PUMP N.T.S. APPD. P.K.S. 13.09.2022
FREQUENCY -- 50 Hz.+3%-5% (Sp. Gr. 1.05) FLOWMORE LIMITED
DRAWING NO. REV.

TYPE OF CONS. -- H.S.S. EFFICIENCY -- 73.5% NEW DELHI GA-SALE22085806 110 02

 45 FLEXIBLE COUPLING (SPACER TYPE) 01 C.I.
44 COUPLING GUARD 01 M.S. (Fab.)
8 9 10 11 12 15 16 17 18 19 20 2 43 HEX. HD. BOLT WITH NUT & WASHER 02 H.T.STEEL (IS-1367,Gr-8.8)
21 2 42 HEX. HD. BOLT WITH NUT & WASHER 04 H.T.STEEL (IS-1367,Gr-8.8)
M.S. (Fab) (IS-2062) (Epoxy Painted)
41 SKID BASE (BASE PLATE) 01
13 2 40 CASING DRAIN ASSY. 01 S.S.-316
2 39 `O' RING 01 NEOPRENE RUBBER
38 16 H.T.STEEL (IS-1367,Gr-8.8)
7 22
2
37
HEX. HD. CAP SCREW (Suction Head To Volute & Frame To Volute)

STUD BOLT WITH NUT 02 H.T.STEEL (IS-1367,Gr-8.8)

2
2 1 36 PIPE PLUG 02 S.S.-316
2 35 PIPE NIPPLE 01 S.S.-316
34 01
23 33
WATER SLINGER
PIPE PLUG 01
RUBBER
S.S.-316
3 2
14 32 OIL FLINGER 01 BRONZE (IS-318, LTB-II)
6 31 OIL SIGHT WINDOW ASSY. 01 STEEL + GLASS
30 SUPPORT FOOT 01 M.S.(Plate)
24 29 HEX. HD. CAP SCREW WITH WASHER 01 H.T.STEEL (IS-1367,Gr-8.8)
2 28 BRG. LOCK WASHER 01 STEEL
27 BRG. LOCK NUT 01 STEEL
25 2 26 KEY FOR COUPLING 01 S.S.-316
2 25 PUMP SHAFT 01 ASTM A276, UNS S31803 DUPLEX S.S.)
2 24 OIL SEAL (D.E.) 01 NITRILE RUBBER
5 26 23 HEX. HD. CAP SCREW 08 H.T.STEEL (IS-1367,Gr-8.8)
2 22 BEARING COVER (D.E.) 01 C.I. (IS-210, FG 260)
21 ANTI FRICTION BEARING (D.E.) (6306 -C3) 02 BRG. STEEL (SKF/FAG)
20 FRAME/BEARING HOUSING 01 C.I. (IS-210, FG 260)
19 BREATHER PLUG 01 STEEL CADMIUM PLATED
18 ANTI FRICTION BEARING (N.D.E.) (6306-C3) 01 BRG. STEEL (SKF/FAG MAKE)
4 17 OIL SEAL (N.D.E.) 01 NITRILE RUBBER
27 16 BEARING COVER (N.D.E.) 01 C.I. (IS-210, FG 260)
3 2 15 SHAFT SLEEVE (STUB SLEEVE) 01 ASTM A 276,UNS 31803 (DUPLEX S.S.)
3 2 14 PIPE PLUG 01 S.S.-316
3 28 13 GASKET (Brg. Cover to Frame,) 02 CHAMPION (STYLE NO.-59)
2 12 HEX. HD. CAP SCREW WITH SPR. WASHER 04 S.S.-316
2 1 11 MECH. SEAL ASSY. 01 Face Sic. v/s Si.C (Out Side Mounted)
29 3 2 1 10 STUFFING BOX BUSH 01 ASTM A 276,S.S.-316 L
2 3 2 09 BACK COVER/BACK HEAD 01 DUPLEX S.S. (ASTM A 890,Gr:-4A)
3 2 08 CASING (VOLUTE) (Semi Open Design) 01 DUPLEX S.S. (ASTM A 890,Gr:-4A)
30 2 07 Vent Conn. Pipe with Valve 02 S.S.-316
2 06 KEY FOR IMPELLER 01 S.S.-316 L
05 IMPELLER (Semi Open Design) 01 DUPLEX S.S. (ASTM A 890,Gr:-4A)
1 3
04 IMPELLER NUT 01 ASTM A 276,S.S.-316 L
2
3 2 03 DOWEL PIN 02 S.S.-316 L
3 1 02 WEARING RING CASING (Back Side) 01 DUPLEX S.S. (ASTM A 890,Gr:-4A)
3 2 01 SUCTION HEAD (Semi Open Design) 01 DUPLEX S.S. (ASTM A 890,Gr:-4A)
S. NO. DESCRIPTION QTY. MATERIAL
JOB NAME :- EFFLUENT (PS 1).,
41 42 40 39 38 37 36 35 34 33 32 31 43 OWNER :- M/s. THDC INDIA LIMITED
CONSULTANT 1:- M/s NTPC LIMITED
CONSULTANT 2:- ENGINEERING PROJECTS (INDIA) LTD
CONTRACTOR :- M/s GAJA ENGINEERING PRIVATE LIMITED,
PROJECT :- KHURJA SUPER THERMAL POWER PROJECT (2x660 MW)
NOTE:- DIRECTION OF PUMP ROTATION:- COUNTER CLOCKWISE, WHEN LOOKING FROM DRIVING END.
PACKAGE :- WATER TREATMENT PLANT & MISCELLANEOUS PACKAGE
THESE ITEM ARE NOT SHOWN IN THIS DRAWING. SUB PACKAGE :- DEMINERALISATION PLANT (UF-RO BASED)
ORDER NO. :- Later On., DT.:-22.08.2022
NAME DATE
CROSS SECTIONAL DRAWING
DRN. SUNIL 13.09.2022
PUMP PARTICULARS (QTY.:- 03 Nos.) FOR SCALE CHD. D.K.S. 13.09.2022
3 CHANGE AS MARKS SUNIL 03.03.2023 FIG. -- 5623 HORIZONTAL END SUCTION PUMP N.T.S. APPD. P.K.S. 13.09.2022
2 CHANGE AS MARKS SUNIL 01.02.2023 SIZE -- 80x50 (3"x2") DRAWING NO. REV.
1 CHANGE AS MARKS SUNIL 22.11.2022 STAGE -- SINGLE FLOWMORE LIMITED
Rev.No. REVISION SIGN DATE LUB. -- OIL NEW DELHI CSD-SALE22085806 110 03
CLAUSE NO Bidder’s Name ………………………..

DE-1B LT MOTOR REV

A GENERAL
1 Manufacturer & Country of origin (Shall be as per approved QA make) LHPL
EFFLUENT DISPOSAL PUMPS (WASTE
2 Equipment driven by motor
RECIRCULATION CUM DISPOSAL PUMPS)
3 Motor type INDUSTRIAL TEFC SAFE AREA MOTOR
4 Quantity 3 NOS
5 KKS Tag
B DESIGN AND PERFORMANCE DATA ---
1 Frame Size 180M
2 Type of duty S1 ( CONTINOUS DUTY )
3 Method of Starting DOL
4 Type of enclosure and method of cooling, Degree of protection. TEFC & IC4A1A1 ,IP55
IS 15999 (PART 1) : 2016,IS 12615:2018, IS 15999
5 Applicable standard to which motor generally conforms
(PART 2/SEC 1) : 2011 , IEC 60034
6 Efficiency class as per is 12615 IE3
7 (a) Whether motor is flameproof NO
8 (b) If, yes, the gas group to which it conforms as per IS2148 NA
9 Type of mounting B3
10 Direction of rotation as viewed from DE END BI-DIRECTIONAL
11 Standard continuous rating at 40 deg. C. ambient temp. as per Indian Standard (KW) 23.5
12 Derated rating for specified normal condition i.e. 50 deg.C ambient temperature (KW) 22

13 Maximum continuous load demand of driven equipment 17.51KW

14 Rated Voltage ( volts ) 415 ,50Hz.
15 Permissible variation of ---
a. Voltage ( volts ) +10% -10%
b. Frequency (Hz) +3% -5%
c. Combined voltage and frequency 10%
16 Rated speed at rated voltage and frequency ( rpm ) 2945
17 At rated Voltage and frequency ---
a. Full load current - Amps 36
b. No load current ( Approx.) - Amps 9.5 A (INDICATIVE)
18 Power Factor at ---
a. 100% load 0.91
b. NO load 0.10 (INDICATIVE)
c. Starting 0.49 (INDICATIVE)
19 Efficiency at rated voltage and frequency,(%) ----
a. 100% load 92.7%
b. 75% load 92.0%
c. 50% load 90.3%
20 Starting current ( amps ) at ---
234A (750% subject to tolerance) & 280.8A (900%
a. 100% voltage
inclusive tolerance)

199.11A (637.5% subject to tolerance) & 236.68A

b. 85% voltage
(765% inclusive tolerance)

187.2A (600% subject to tolerance) & 224.64A

c. 80% voltage
(720% inclusive tolerance)
21 Minimum permissible starting Voltage (volts) 352.75V (85%)
22 Starting time minimum permissible voltage ---
a. Without driven equipment coupled. 1 sec
b. With driven equipment coupled. 2 sec
23 Safe stall time with 100% and 110% of rated voltage ( Sec.) ---
a. From hot condition 10/8
b. From cold condition 22/18
24 Torques : ---
a. Starting torque at min. permissible voltage ( kg-mtr.) 11.83 (162.5%)
b. Pull up torque at rated voltage ( Kgm ) 12.01 (165%)
c. Pull out torque ( Kgm ) 18.55 (255%)
d. Min. accelerating torque (kg.m) available. 0.728 (10%)
e. Rated torque (kg.m ) 7.28
25 Stator winding resistance per phase (ohms at 20 Deg.C) - Approx. 0.38 (INDICATIVE)
26 GD² value of motors / load ( Kgm²) 1.008/ 0.11
27 No. of permissible successive starts when & motor is in cold/ hot condition. 3/2
28 Locked rotor KVA input 235
29 Locked rotor KVA / KW 11
30 Vibration on limit : velocity (mm/sec) AS PER IS:12075
31 Noise level limit (dBA) - Guaranteed 85 db (A) at 1 Meter measured as per IS:12065
C CONSTRUCTIONAL FEATURES ---
1 Stator winding insulation VPI
a. Class & Type CLASS F, RISE CLASS B.
b. Winding Insulation Process VPI
c. Tropicalised (Yes / No ) Yes
d. Temp. rise over specified maximum ambient temperature of 50 deg. C. 70
CLAUSE NO Bidder’s Name ………………………..

e. Method of temperature measurement Resistance Method

f. Stator winding connection DELTA (6L)
2 Main Terminal box ----
a. Type IP55; STUD TYPE
b. Location ( viewed from NDE side) AS PER GAD
c. Entry of cables (bottom /side) AS PER GAD
d. Recommended cable size ( To be matched with cable size envisaged by owner ) NA
e. Fault level (MVA) 50 KA FOR 0.25 SEC WITH FUSE PROTECTION
f. Cable glands & lugs details AS PER GAD
3 Type of DE/NDE Bearings / NO/Life DGBB & AS PER GAD/ 40,000 HRS
4 Motor Paint shade RAL 5012 MIN. 100 MICRON DFT
5 Weight of ( Approx.) ---
a. Motor stator (KG) 120 KG APPROX
b. Motor rotor (KG) 80 KG APPROX
c. Total weight (KG) 200 KG APPROX
D List of accessories

1 Space Heaters (Applicable for 30KW & above motor ) (Nos/power in watts/ suply voltage) NA

2 Terminal Box for Space Heater (Yes /No) NA

3 Speed Switch (Yes / No) NO
4 Insulation of bearing (Yes / No) NO
5 Noise reducer (Yes /No) NO
6 Grounding pads ---
a. No and size on motor or body 2 NOS AS PER GAD
b. location 1 NOS AS PER GAD
7 Vibration pads ---
a. No and size NO
b. Location NO
8 Any other fitments NO
E List of Curves ---
1 Torque speed characteristic of the motor Enclosed
2 Thermal withstand characteristic Enclosed
3 Starting current vs. Time Enclosed
4 Starting current vs. speed Enclosed
5 P.F. and Effi Vs. Load Enclosed

Note-All Performance figures are subjected to IS/IEC:60034-1 tolerance.

Prepared By FLUE GA SDE SULPHURISATION (FGD) SYSTEM PACKAGE Approved By

For Lhp For Lhp
MSP SMG
 LAXMI HYDRAULICS PVT LTD. , B-11- MIDC
MKTG Ref No.: D6PP2208194
CHINCHOLI , SOLAPUR.
SPEED Vs T0RQUE & CURRENT CHARACTERISTICS

CUSTOMER : FLOWMORE LIMITED (UNIT-II)

IE-3
kW : 22 POLE : 2 VOLTS : 415 QTY : 3
1.5/2.0
800
0

700

Current Speed at 110% Voltage

600 Current Speed at 100% Voltage

F
U
500
L
L Current Speed at 80% Voltage

L
O
A 400
D

T
O
R
Q 300
U
E
MOTOR Wt. APPROX. ( kg ) T-N at 100% Voltage T-N at 110% Voltage
&
200
C
U
R
R
E
N 100
T
T-N at 80% Voltage
VARIABLE TORQUE
0
0 10 20 30 40 50 60 70 80 90 100

% SYNCHRONOUS SPEED

2 Prepared By MSP 20-05-2022

1 Checked By MSP 20-05-2022
NO REVISION SIGN SIGN DATE
 LAXMI HYDRAULICS PVT LTD. , B-11-
MKTG Ref No.: D6PP2208194
MIDC CHINCHOLI , SOLAPUR.

LOAD Vs EFF., P.F.,

CUSTOMER : FLOWMORE LIMITED (UNIT-II)
IE-3
kW : 22 POLE : 2 VOLTS : 415 QTY : 3

1.5/2.0
100.00 1.00
0
95.00

90.00 0.90

85.00
EFFICIENCY

80.00 0.80

75.00
% EFFICIENCY

70.00 0.70
POWER FACTOR

P.F.P.U.
65.00

60.00 0.60

55.00

50.00 0.50

45.00

40.00 0.40

35.00

30.00 0.30

25.00

20.00 0.20

15.00

10.00 0.10

5.00

0.00 0.00
0 10 20 30 40 50 60 70 80 90 100

% LOAD

2 Prepared By MSP 20-05-2022

1 Checked By MSP 20-05-2022
NO REVISION SIGN DATE
 LAXMI HYDRAULICS PVT LTD. , B-11- MIDC
MKTG Ref No.: D6PP2208194
CHINCHOLI , SOLAPUR.
STARTING CURRENT VS STARTING TIME AND THERMAL WITHSTAND TIME.

CUSTOMER : FLOWMORE LIMITED (UNIT-II)

IE-3
kW : 22 POLE : 2 VOLTS : 415 QTY : 3

100 1.5/2.0
0

10
THERMAL WITHSTAND

Istg (time) at 80%V

TIME (sec)

1
Istg (time) at 100%V

0.1
0 100 200 300 400 500 600 700
% FULL LOAD CURRENT

L. R.CURRENT at 100% voltage : 650 % OF FLA THERMAL WITHSTAND TIME(sec):

Starting time at 100% voltage : 2 sec AT100% RATED VOLTAGE (HOT) : 10
Starting time at 80% voltage : 3 sec AT100% RATED VOLTAGE (COLD): 22
2 Prepared By MSP 20-05-2022
1 Checked By MSP 20-05-2022
NO REVISION SIGN SIGN DATE
DRG. NO.- TWT

TWT VS STARTING CURRENT CHARACTERISTICS

CUSTOMER : FLOWMORE LIMITED (UNIT-II)

kW : 22 POLE : 2 VOLTS : 415 QTY : 3

10000 TWT-HOT

TWT-COLD

TWT-HOT 100% V

TWT-COLD 100% V

TWT-HOT 110% V

TWT-COLD 110% V

1000

100

39
TIME IN SECS.

22
18

18
10
10
8

0
0 100 200 300 400 500 600 700 800 900

% CURRENT

% L. R.CURRENT at 110% voltage : 715 HOT(sec) 8 COLD(sec) 18

% L. R.CURRENT at 100% voltage : 650 HOT(sec) 10 COLD(sec) 22
% L. R.CURRENT at 80% voltage : 488 HOT(sec) 16 COLD(sec) 34
2 PREP MSP
1 APPD
NO REVISION SIGN SIGN DATE
DRG. NO.- NEG.SEQ.

NEGATIVE SEQUENCE CHARACTERISTICS

CUSTOMER : FLOWMORE LIMITED (UNIT-II)

kW : 22 POLE : 2 VOLTS : 415 QTY : 3

700

600

500

WIT.TIME (SECS)
WITHSTAND TIME(SECS)

400

300

200

100

0
0 5 10 15 20 25 30 35 40 45
% UNBALANCE CURRENT

2 PREP MSP 20-05-2022

1 APPD 20-05-2022
NO REVISION SIGN/DATE SIGN DATE