Tel: +44 (0)1279 408 777
Email: [email protected]
Website: www.gocomsys.com
Refurbished CISCO ASR-9010-SYS Datasheet
CISCO > ROUTERS
Cisco ASR 9000 Series Aggregation Services Routers
Hardware Available for Cisco ASR 9000 & ASR 9900 Series
Cisco ASR 9000 & ASR 9900 Series Chassis
Cisco ASR 9010 chassis ASR-9010-AC-V2
ASR-9010-DC-V2
ASR-9010-SYS
Cisco ASR 9006 chassis ASR-9006-AC-V2
ASR-9006-DC-V2
ASR-9006-SYS
Cisco ASR 9922 chassis ASR-9922-AC
ASR-9922-DC
ASR-9922
Cisco ASR 9912 chassis ASR-9912-AC
ASR-9912-DC
ASR-9912
Cisco ASR 9910 chassis ASR-9910
Cisco ASR 9906 chassis ASR-9906
Cisco ASR 9000 Series Power Infrastructure
AC power supply, 6000W PWR-6KW-AC-V3
PWR-6KW-AC-V3=
AC power entry module V3 A9K-AC-PEM-V3
A9K-AC-PEM-V3=
AC power supply, 3000W PWR-3KW-AC-V2
PWR-3KW-AC-V2=
AC power entry module V2 ASR9K-AC-PEM-V2
A9K-AC-PEM-V2=
DC power supply, 4400W PWR-4.4KW-DC-V3
PWR-4.4KW-DC-V3=
DC power entry module V3 A9K-DC-PEM-V3
A9K-DC-PEM-V3=
DC power supply, 2100W PWR-2KW-DC-V2
PWR-2KW-DC-V2=
Cisco ASR 9000 Series Thermal Infrastructure
Cisco ASR 9010 fan, 2 fan trays per ASR-9010-FAN
chassis ASR-9010-FAN-V2
Cisco ASR 9006 fan, 2 fan trays per ASR-9006-FAN
chassis ASR-9006-FAN-V2
Cisco ASR 9922 fan, 4 fan trays per ASR-9922-FAN
chassis ASR-9922-FAN-V2
ASR-9922-FAN-V3
Cisco ASR 9912 fan, 2 fan trays per ASR-9912-FAN
chassis A9K-9912-FAN
Cisco ASR 9910 fan, 2 fan trays per ASR-9910-FAN
chassis
Go Communications Systems Ltd | Created: 23/11/2020 Page 1 of 6
Cisco ASR 9906 fan, 2 fan trays per ASR-9906-FAN
chassis
Cisco ASR 9904 fan, 1 fan tray per ASR-9904-FAN
chassis A9K-9904-FAN
Cisco ASR 9010 fan filter, 1 per chassis ASR-9010-FILTER
Cisco ASR 9006 fan filter, 1 per chassis ASR-9006-FILTER
Cisco ASR 9922 fan filter, 1 center and ASR-9922-FLTR-CEN
2 side filters per chassis ASR-9922-FLTR-CV2
ASR-9922-FLTR-LR
Cisco ASR 9912 fan filter, 1 center and ASR-9912-FLTR-CEN
2 side filters per chassis ASR-9900-FLTR-LR
Cisco ASR 9910 fan filter, 1 per chassis ASR-9910-FILTER
Cisco ASR 9906 fan filter, 1 per chassis ASR-9906-FILTER
Cisco ASR 9904 fan filter, 1 per chassis ASR-9904-FILTER
Cisco ASR 9006 and ASR 9010
Environmental Specifications (All Entries Applicable to Cisco ASR 9006 and ASR 9010)
Operating temperature (nominal) 41 to 104ºF (5 to 40ºC)
Operating temperature (short-term) ASR 9006: 23 to 131ºF (-5 to 55ºC)
ASR 9010: 23 to 122ºF (-5 to 50ºC)
Operating humidity (nominal) (relative 5 to 90%
humidity)
Storage temperature -40 to 158ºF (-40 to 70ºC)
Storage (relative humidity) 5 to 93%
Regulatory Compliance (All Entries Applicable to Cisco ASR 9006 and ASR 9010)
Network Equipment Building Cisco ASR 9006 and ASR 9010 Routers are designed to meet:
Standards (NEBS) SR-3580: NEBS Criteria Levels (Level 3)
GR-1089-CORE: NEBS EMC and Safety
GR-63-CORE: NEBS Physical Protection
VZ.TPR.9205: Verizon TEEER
ETSI standards Cisco ASR 9006 and ASR 9010 Routers are designed to meet:
EN300 386: Telecommunications Network Equipment (EMC)
ETSI 300 019 Storage Class 1.1
ETSI 300 019 Transportation Class 2.3
ETSI 300 019 Stationary Use Class 3.1
EMC standards emission Cisco ASR 9006 and ASR 9010 Routers are designed to meet:
FCC Class 47CFR15 A
ICES 003 Class A
AS/NZS CISRP22 Class A
CISPR 22 (EN55022) Class A
VCCI Class A
BSMI Class A
IEC/EN 61000-3-12: Power Line Harmonics
IEC/EN 61000-3-11: Voltage Fluctuations and Flicker
EN55022: Information Technology Equipment (Emissions)
EN 50121-4: Railway EMC
EMC standards immunity Cisco ASR 9006 and ASR 9010 Routers are designed to meet:
IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air)
IEC/EN-61000-4-3: Radiated Immunity (10V/m)
IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal)
IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM)
IEC/EN-61000-4-5: Signal Surge Ports (1kV)
IEC/EN-61000-4-5: Surge DC Port (1kV CM, 1kV DM)
IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)
IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)
IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations
EN55024: Information Technology Equipment (Immunity)
EN50082-1/EN-61000-6-1: Generic Immunity Standard
EN 50121-4: Railway EMC
Safety Cisco ASR 9006 and ASR 9010 Routers are designed to meet:
Go Communications Systems Ltd | Created: 23/11/2020 Page 2 of 6
UL/CSA/IEC/EN 60950-1
IEC/EN 60825 Laser Safety
ACA TS001
AS/NZS 60950
FDA Code of Federal Regulations Laser Safety
Cisco ASR 9904
Categories
Physical specifications Height: 10.38 in. (263.65x mm) (6 RU)
Width: 17.57 in. (446.28 mm)
Depth: 25.02 in. (635.51 mm)
Weight:
62 lb (28.2 kg) (V2 PEM AND chassis)
114.05 lb (51.84 kg) (2 RSP, Fan Tray, PEM)
Slot orientation Horizontal
Cisco ASR 9000 Series RSP Dual redundant RSPs with integrated fabric in 2 slots
Fabric -
Cisco ASR 9000 Series line cards 2 line-card slots
Commons” components 2 RSPs
1 fan tray
1 PEM (either DC or AC)
1 fan filter
Reliability and availability Fabric redundancy
Feed redundancy
Power-supply redundancy
Route processor redundancy
Software redundancy
Rack mounting 19-in.
21- and 23-in. adapters available
Note: Minimum 17.75-in. opening between posts is needed for proper operation.
Cabinet mounting Yes
Wall mounting No
Performance
Fabric One per RSP:
Active/active nonblocking operation mode in dual-RSP redundant configuration
Fully redundant in dual-RSP redundant configuration
Built-in service-intelligence and traffic-prioritization capability
Power
Modularity Pay-as-you-grow power for future scalability, available in AC and DC.
Multiple power module types:
3 kW AC power module
2.1 kW DC power module
Note: Mixing of AC and DC modules is not supported
Redundancy AC: N+N redundancy
DC: N+1 redundancy
Power module redundancy
A/B Feed redundancy
Power zones No power zone restrictions
Fully load-sharing power infrastructure
Power input Worldwide ranging AC (200-240V; 50-60 Hz; 16A maximum)
Worldwide ranging DC (-40 to -72V; 50A nominal, 60A maximum)
Environmental Specifications
Operating temperature (nominal) 41 to 104ºF (5 to 40ºC)
Operating temperature (short term) 23 to 131ºF (-5 to 55ºC) for ASR 9904
23 to 122ºF (-5 to 50ºC) for ASR 9910
Operating humidity (nominal) (relative 5 to 90%
humidity)
Go Communications Systems Ltd | Created: 23/11/2020 Page 3 of 6
Storage temperature -40 to 158ºF (-40 to 70ºC)
Storage (relative humidity) 5 to 93%
Regulatory Compliance
Network Equipment Building The Cisco ASR 9904 Router is designed to meet (qualification in progress):
Standards (NEBS) SR-3580: NEBS Criteria Levels (Level 3)
GR-1089-CORE: NEBS EMC and Safety
GR-63-CORE: NEBS Physical Protection
VZ.TPR.9205: Verizon TEEER
ETSI standards The Cisco ASR 9904 Router is designed to meet (qualification in progress):
EN300 386: Telecommunications Network Equipment (EMC)
ETSI 300 019 Storage Class 1.1
ETSI 300 019 Transportation Class 2.3
ETSI 300 019 Stationary Use Class 3.1
EMC standards emission The Cisco ASR 9904 Router is designed to meet:
FCC Class 47CFR15 A
ICES 003 Class A
AS/NZS CISRP22 Class A
CISPR 22 (EN55022) Class A
VCCI Class A
BSMI Class A
IEC/EN 61000-3-12: Power Line Harmonics
IEC/EN 61000-3-11: Voltage Fluctuations and Flicker
EN55022: Information Technology Equipment (Emissions)
EN 50121-4: Railway EMC
EMC standards immunity The Cisco ASR 9904 Router is designed to meet:
IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air)
IEC/EN-61000-4-3: Radiated Immunity (10V/m)
IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal)
IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM)
IEC/EN-61000-4-5: Signal Surge Ports (1kV)
IEC/EN-61000-4-5: Surge DC Port (1kV CM, 1kV DM)
IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)
IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)
IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations
EN55024: Information Technology Equipment (Immunity)
EN50082-1/EN-61000-6-1: Generic Immunity Standard
EN 50121-4: Railway EMC
Safety The Cisco ASR 9904 Router is designed to meet:
UL/CSA/IEC/EN 60950-1
IEC/EN 60825 Laser Safety
ACA TS001
AS/NZS 60950
FDA Code of Federal Regulations Laser Safety
Cisco ASR 9906 and ASR 9910
Environmental Specifications (All Entries Applicable to Cisco ASR 9906 and ASR 9910)
Operating temperature (nominal) 41 to 104ºF (5 to 40ºC)
Operating temperature (short term) 23 to 131ºF (-5 to 55ºC) for ASR 9906
23 to 122ºF (-5 to 50ºC) for ASR 9910
Operating humidity (nominal) (relative 5 to 90%
humidity)
Storage temperature -40 to 158ºF (-40 to 70ºC)
Storage (relative humidity) 5 to 93%
Regulatory Compliance (All Entries Applicable to Cisco ASR 9906 and ASR 9910)
Network Equipment Building Cisco ASR 9906 and ASR 9910 Routers are designed to meet (qualification in progress):
Standards (NEBS) SR-3580: NEBS Criteria Levels (Level 3)
GR-1089-CORE: NEBS EMC and Safety
GR-63-CORE: NEBS Physical Protection
VZ.TPR.9205: Verizon TEEER
ETSI standards Cisco ASR 9906 and ASR 9910 Routers are designed to meet (qualification in progress):
EN300 386: Telecommunications Network Equipment (EMC)
ETSI 300 019 Storage Class 1.1
ETSI 300 019 Transportation Class 2.3
ETSI 300 019 Stationary Use Class 3.1
Go Communications Systems Ltd | Created: 23/11/2020 Page 4 of 6
EMC standards emission Cisco ASR 9906 and ASR 9910 Routers are designed to meet:
FCC Class 47CFR15 A
ICES 003 Class A
AS/NZS CISRP22 Class A
CISPR 22 (EN55022) Class A
VCCI Class A
BSMI Class A
IEC/EN 61000-3-12: Power Line Harmonics
IEC/EN 61000-3-11: Voltage Fluctuations and Flicker
EN55022: Information Technology Equipment (Emissions)
EN 50121-4: Railway EMC
EMC standards immunity Cisco ASR 9906 and ASR 9910 Routers are designed to meet:
IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air)
IEC/EN-61000-4-3: Radiated Immunity (10V/m)
IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal)
IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM)
IEC/EN-61000-4-5: Signal Surge Ports (1kV)
IEC/EN-61000-4-5: Surge DC Port (1kV CM, 1kV DM)
IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)
IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)
IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations
EN55024: Information Technology Equipment (Immunity)
EN50082-1/EN-61000-6-1: Generic Immunity Standard
EN 50121-4: Railway EMC
Safety Cisco ASR 9904 and ASR 9910 Routers are designed to meet:
UL/CSA/IEC/EN 60950-1
IEC/EN 60825 Laser Safety
ACA TS001
AS/NZS 60950
FDA Code of Federal Regulations Laser Safety
Cisco ASR 9912 and ASR 9922
Environmental Specifications (All Entries Applicable to Cisco ASR 9912 and ASR 9922)
Operating temperature (nominal) 41 to 104ºF (5 to 40ºC)
Operating temperature (short-term) 23 to 131ºF (-5 to 55ºC)
Operating humidity (nominal) (relative 5 to 90%
humidity)
Storage temperature -40 to 158ºF (-40 to 70ºC)
Storage (relative humidity) 5 to 93%
Regulatory Compliance (All Entries Applicable to Cisco ASR 9912 and ASR 9922)
Network Equipment Building Cisco ASR 9912 and ASR 9922 Routers are designed to meet:
Standards (NEBS) SR-3580: NEBS Criteria Levels (Level 3)
GR-1089-CORE: NEBS EMC and Safety
GR-63-CORE: NEBS Physical Protection
VZ.TPR.9205: Verizon TEEER
ETSI standards Cisco ASR 9912 and ASR 9922 Routers are designed to meet:
EN300 386: Telecommunications Network Equipment (EMC)
ETSI 300 019 Storage Class 1.1
ETSI 300 019 Transportation Class 2.3
ETSI 300 019 Stationary Use Class 3.1
EMC standards emission Cisco ASR 9912 and ASR 9922 Routers are designed to meet:
FCC Class 47CFR15 A
ICES 003 Class A
AS/NZS CISRP22 Class A
CISPR 22 (EN55022) Class A
VCCI Class A
BSMI Class A
IEC/EN 61000-3-12: Power Line Harmonics
IEC/EN 61000-3-11: Voltage Fluctuations and Flicker
EN55022: Information Technology Equipment (Emissions)
EN 50121-4: Railway EMC
EMC standards immunity Cisco ASR 9912 and ASR 9922 Routers are designed to meet:
IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air)
IEC/EN-61000-4-3: Radiated Immunity (10V/m)
IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal)
IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM)
IEC/EN-61000-4-5: Signal Surge Ports (1kV)
Go Communications Systems Ltd | Created: 23/11/2020 Page 5 of 6
IEC/EN-61000-4-5: Surge DC Port (1kV CM, 1kV DM)
IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)
IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)
IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations
EN55024: Information Technology Equipment (Immunity)
EN50082-1/EN-61000-6-1: Generic Immunity Standard
EN 50121-4: Railway EMC
Safety Cisco ASR 9912 and ASR 9922 Routers are designed to meet:
UL/CSA/IEC/EN 60950-1
IEC/EN 60825 Laser Safety
ACA TS001
AS/NZS 60950
FDA Code of Federal Regulations Laser Safety
The next steps...
Tel: +44 (0)1279 408 777
Email: [email protected]
Website: www.gocomsys.com
Go Communications Systems Ltd | Created: 23/11/2020 Page 6 of 6
