ON-THE-JOB TRAINING, II

POLARIS CABLE VISION INC.

CALAMAGUI 1st CITY OF ILAGAN ISABELA

A Narrative Report Presented to the Faculty of

COLLEGE OF EDUCATION
Isabela State University-Ilagan Campus
City of Ilagan, Isabela

In Partial fulfillment of the Requirements for the Degree of

BACHELOR OF TECHNICAL VOCATIONAL TEACHER EDUCATION
Major in Electronics Technology

By:

ROMAR B. GRAMAJE

August 2022
 APPROVAL SHEET

This narrative report entitled “On-The-Job Training at “POLARIS

CABLE VISION INCORPORATED”. prepared and submitted by ROMAR

B. GRAMAJE in partial fulfillment of the requirements for the degree

Bachelor of Science in Industrial Technology Major in Electronics

Technology is hereby endorsed.

FLORO A. ANDAYA, MTE

SIT Coordinator

Accepted and approved in partial fulfillment of the requirement for the

degree of Bachelor of Science in Industrial Technology, Major in

Electronics.

JAIMEE SALADINO, MAEd

Chairman, BSINDT

PHD., MICHELLE A. QUIJANO

Dean, CEd

ii
 PREFACE

On-The-Job Training is important to every student who is taking up

Bachelor of Technical Vocational Teacher Education major in Electronics

Technology. It enhances the student’s skill to become competent and

skilled worker in his/her respective field of specialization.

The main goal of this training is to improve the skills and

performance of the students in various tasks and work assignments.

This narrative report documents all the activities and experiences of

the students while on training.

iii
 ACKNOWLEDGEMENT

Narrative report would not have completed without the support,

assistance, and inspiration of the following individuals:

Prof. Floro Andaya SIT Coordinator for his support extended during

the training and until the writers finished this narrative report;

Mrs. Cecile Dy, Board of director and owner, for giving us a chance

to take training in their Company. His appreciation for her support and

assistance;

Mr. Ismael Pomar for sharing their knowledge and skills, and for

helping me during the training;

Friends, board mates and Co-OJT trainee, for their support and

inspiration in times of difficulties,

ISU – Ilagan faculty for their knowledge and skills they shared in

helping the writer reach this far in his academic endeavor

Special thanks to his family for their unending love and moral

supports when he was in the training. He would like to express his

sincerest gratitude because of you.

And most of all to our Almighty God, thank you for everything!

Christian J. Garcia

Bachelor of Technical Vocational Teacher Education

iv
 DEDICATION

In this journey of training. I would like to dedicate this to our

almighty God who’s always there for us.

To my Mother, for doing everything they can just to give anything I

want and always supporting me no matter what, and to my Father who is

in heaven, who told me to pursue my study. My success is all for you.

I also dedicate this OJT journey to all my professors for not getting

tired to teach and share their knowledge for us to have a better future

someday.

To all people who helping me either it’s a small or big thing. Either it

is very important or not they still helped me just to show their support for

me.

I dedicate this also to those who’s believing me that I can surpass

all the problem that I’m facing and will face in the future. Especially when it

comes to my studies, they always believing me that I will fulfill it and make

all my dreams come true.

v
 TABLE OF CONTENTS

Title Page

Approval Sheet ii

Preface iii

Acknowledgement iv

Dedication v

Table of Contents vi

CHAPTER I – INTRODUCTION

Introduction 1

Significance of On-The-Job Training 3

Description of work job 4

Skilled Acquired 6

Knowledge acquired 6

CHAPTER II – COMPANY HISTORY

History 7

Vision and Mission 8

Duties and Responsibilities 9

Organizational Chart 10

Vicinity map 11

Physical Layout 12

List of Equipment 13

vi
CHAPTER III – ACCOMPLISHMENTS

Daily Activities 14

Daily Time Record 22

Photos in Action 25

Happy Moments 27

CHAPTER IV – RESULT AND DISCUSSIONS

Personal related to work 28

Work 28

Workmates 29

Supervisor 29

CHAPTER V – SUMMARY, CONCLUSION AND RECOMMENDATIONS

Summary 30

Conclusions 30

Recommendations 31

Problem Encountered 31

Comment 32

APPENDICES

Certification 33

Evaluation Form 34

Editor's Certification 35

Curriculum Vitae 36

vii
 CHAPTER I

INTRODUCTION

On-the-job Training is part of a college curriculum that aims to train

and orient students about the work and their future career. Students are

required to complete such 240 hours of training. It is a type of skill

development where a worker learns how to do the work through hands-on

experience. On the job Training is one method by which students are

exposed with different work situation designed to give students an

opportunity to experience and a chance to apply the theories and

computation that they have learned from the school. It also helps the

students to acquire relevant knowledge and skills by performing in actual

work setting.

OJT is very important not only to teach students regarding their

chosen career but also to show students the reality about working. The

students will be exposed to the actual work related to the course that they

are taking. It also allows those with no experience to work and to learn at

the same time. On-the-job Training helps the trainee to learn more about

his chosen field and practice what he has learned from the school. It helps

in the building up of the trainee’s competence. Of course, when a student

is competent enough, he will be able to do things successfully. This

training develops one’s professionalism in dealing with people. After the

training, the trainee will be able to handle Situations properly and he’ll be

1
able to know how to socialize well with his colleagues, he will also able to

work well with everyone and he’ll have a good teamwork. OJT also

enhances the critical thinking abilities and discipline of the student

conducting his training in a company.

Having a proper On-the-job Training helps in the preparation of

future professionals for their future jobs. What the students learned in their

On-the-job Training, even the little things, can be applied when they are

already working. Students will be trained not only academically but socially

as well. The way they work and communicate with others will not be a

problem for them anymore. It also gives the trainee the chance to immerse

himself in his chosen field and experience and learn the skills necessary to

the industry he is interested in working with experienced staff, one will be

able to observe how the job is done properly.

Aside from work experience, On-the-job Training allows the trainee

to get acquainted with the real professionals and to meet people having

different positions in the company, either high or low. The trainee will be

able to know how to adjust to other people’s personalities and attitudes.

On-the-job Training require effort and seriousness. A trainee should

take the OJT seriously as it can be powerful tool for a person in preparing

for the next chapter of life as a professional. It can possibly be a source of

recommendation when they take that big lift from being students to career

professionals someday.

2
Significance of on-the-job training

On-the-job training is very useful to everyone it improves learning

retention. When learning and everyday work are combined, mind is

processing and associating the sights and sounds of the environment with

the skills being developed. On-the-job training helps instructors, too. They

can see how their lessons work in practice and then fine-tune them. The

process even lets instructors field-test the ideas and techniques they

teach. Sometimes, this testing leads not only to better teaching, but also to

better processes and trainees will also enhance themselves to be a good

professional someday

Student

The students will learn rich of information about the value and

importance of the course and the benefits of self-employment.

Teacher

A Teacher is the facilitator of learning in his own field of

specialization. Hence, On the Job Training of the student is a positive

reinforcement for the lacking of the facilities in transferring the necessary

knowledge and skills to the students which referred as a clientele of the

university.

3
School

A school/university is a place of molding, nurturing, developing and

discovering the potentials of individual student. Hence, On the Job

Training is embedded in every curriculum in order to train every clientele to

practice their chosen career prior the employment.

Cooperating agency

Cooperating agency is to guide the proper and standard way in

services. To send the trainee in the field for the actual work/hands on to

get a better experience for self-employment.

Description of work job

On-the-Job Training serves as a way that gives students a chance

to apply the lessons learned from the school. It also aids the students to

achieve relevant knowledge and skills through the actual experience in

working in the field of their profession. Thus, the workplace and the field

serve as a new venue of learning for the student.

Welcoming the Subscriber- the pleasant of greeting in the guests to our

humblest and hospitable way.

4
Troubleshoot- to check the electronic components such a power supply,

main cable connection and amplifier section.

Tests- to check the unit if possible defected to process for receive if

complete to repair the unit.

Surveying- for installing cable channel need survey first the house of

costumer to place the unit.

Installing Cable Connection- Subscribers are filing the application form

and get the data information to installing the cable connection.

Check line- We service and check line the cable connection of subscriber

to troubleshooting the lines, connectors, taps, and amplifier to identify the

possible cause of fails signals

Disconnecting Cable Lines - If subscriber does a not pay under the

three-monthly fees of cable connection, we disconnect their lines from the

main connection.

5
Reconnecting Cable Lines- If subscribes are willing to reconnect their

line we give them a change to reconnect the cable connections.

Skills acquired

The trainee was able to familiarize with lots of things like table

installing cable connection, checking the line of subscriber cable channel,

proper use of tools and equipment, administrative works, and

professionalism, work ethics, patience and determination.

Knowledge acquired

The trainee learned to communicate with the costumer by proper

analyzing how to use the appliances and maintaining their good

conditions. The trainee was able to manage his/her time and the

importance of all, the trainee learned how to act properly and

professionally not only to his/her colleagues but to different types of people

from all walks of life.

6
 CHAPTER II

COMPANY PROFILE

HISTORICAL BACKGROUND OF POLARIS CABLE VISION, INC.

The birth of advance technology signified the putting up of a

satellite cable system in the Municipality of Ilagan. It was April, 1992 when

Polaris Cable Vision, Inc., introduced by Mrs. Cecilia M. Dy to put up the

business. Mrs. Ofelia C. Binag then was tasked to look for possible

investors who are willing to invest.

During the first few weeks of Polaris Cable Vision, Inc., there were

lots of apprehensions, anxieties as the business was new to each and

every one as to whether this will prosper or not. Collective effort for each

one was solicited to be able to achieve our goal and that is a cable

television. Mrs. Rosario A. Lim, offered her place for the head- end where

in we can install all the necessary gadgets inside their compound. PCVI

7
office was place temporarily at Mrs. Ofelia C. Binag’s residence. All

hardware’s and accessories were purchased by Engr. Emi G. Baggao.

Operation started immediately upon set- up of the head- end. As time

passes by Polaris Cable Vision, Inc. expanded with few more subscribers

until it went to a full-blown operation putting its own office building with its

head-end as integral part of the building. Today, Polaris Cable Vision, Inc.

is catering the poblacion & suburbs, rendering quality service of 41

channels enjoyed and viewed by a number of subscribers.

Polaris Cable Vision, Inc. has a town pronged objective: Social &

Economic. As a private entity it considers itself a portion of government in

its development effort. It directly supplements economic trust called social

& economical function. Polaris Cable Vision, Inc. aims to evolve itself on

quality service of viewing towards the integration of development

opportunities in the rural sector.

Vision

PCVI provides wholesome entertainment and improve life quality of our

subscribers by providing 41 channels, local and international programs via

satellite.

Mission

PCVI will professionally conduct its business while maintaining strong

satisfying relationships with our customers, employees, shareholders and

the communities which one operate.

8
DUTIES AND RESPONSIBILITIES

Tried and Tested Operating System

The management system that Polaris Cable Inc. offers is the product

of years of experience in the Cable care industry. A comprehensive

operating manual will guide you in running an effective, efficient business,

inevitably leading to significant profit gain.

Topnotch Training Program

The Polaris Cable Inc. is your source for talented technicians each

one of them armed hands-on training in Installing, Repairing, Servicing

and many more. This ensures your service center of excellent serve and a

competent ambience that will keep costumer coming.

Constant and Cost-Efficient Supplies

The Polaris Cable Inc. is your main suppliers for all your cable

needs. As fellow service center owners who understand as needs, we

guarantee benefits and bargains in your purchases.

9
ORGANIZATIONAL CHART

10
VICINITY MAP

11
PHYSICAL LAYOUT

12
 LIST OF TOOLS AND EQUIPMENT

Equipment Tools

 Vehicle Mitsubishi L300.  Cutter

 Modem  Crimper
 Passive  Philip Screw
 Taps  Flat Screw
 Amplifier  Allen wrench
 Power Supply  Wrench tool
 Cable Wire  Side Cutter
 Untreatable Power Supply  Hammer
 Computer  Locker
 Printer  Drilling Tools
 Television  Pliers tools
 Ladder  Multi tester
 RJ60 Connector  Digital Ammeter
 RJ11 Connector  Cable Cutter
 Terminator  Fiber clever
 Splitter  FTTH Fiber connector
 Decoder box
 Satellite Disc
 Modulator
 Combiner
 Router
 Tool Box
 High Pass
 Locker Device
 Fiber splicer

13
 CHAPTER III

ACCOMPLISHMENT REPORT

DAILY ACTIVITIES

11, 2022

Installed the Internet connection at Barangay Calamagui 2 nd and checked

the internet speed.

June 13, 2022

Checked line at Barangay Baculod and changed the RJ11 cable wire at

Barangay Fugu, City of Ilagan.

June 14, 2022

Installed the RJ11 cable wire at Villa Jesusa Subdivision, Alibagu, City of

Ilagan.

June 15, 2022

Installed RJ11 cable at Barangay Guinatan and checked line at Barangay

Calamagui 1st, City of Ilagan.

June 16, 2022

Installed the grounding wire at Barangay Baculod and checked line at

Barangay Calamagui 2nd, City of Ilagan.

14
June 17, 2022

Disconnected cable line connection at Barangay Calamagui 1 st and

Barangay Baligatan, City of Ilagan and collected the internet fee bill of

subscribers.

June 18, 2022

Checked line at Barangay Camunatan, City of Ilagan and changed the

RJ60 connector.

June 20, 2022

Checked the main line wire at Barangay Alibagu and checked the power

supply near Isabela Doctors General Hospital.

June 21, 2022

Reconnected the internet connection at Barangay Baligatan and changed

the modem of subscriber.

June 22, 2022

Installed the internet connection at Barangay Baligatan and changed the

modem in Villa Jesusa.

June 24, 2022

Reconnected the cable wire at Francisca Village and checked the cable

wire at Barangay Bliss Village, City of Ilagan.

June 25, 2022

Replaced the power supply section at Barangay Centro and checked the

main line cable wire.

15
June 28, 2022

Checked line at Barangay Guinatan and change the RJ11 connector and

checked the frequency at Barangay Alibagu, City of Ilagan.

June 29, 2022

Installed internet connection at Alibagu and check line the cable in

Barangay Imelda Bliss Village.

June 30, 2022

Checked line at Barangay Baculod and change the modem upgrade to sky

worth modem in Barangay Bliss Village

July 1, 2022

Installed the cable connection at Barangay Osmena and checked line at

Barangay Bagumbayan, City of Ilagan.

July 2, 2022

Installed grounding wire at Barangay Alibagu, City of Ilagan and checked

the frequency of amplifier.

July 4, 2022

Replaced the power supply section at Barangay Centro and checked the

main line cable wire.

July 6, 2022

Disconnect the internet connection at Capitol Hills

16
July 7, 2022

Installed the cable and internet connection at Barangay Camunatan.

July 8, 2022

Installed the Internet connection in Barangay Baculod City of Ilagan.

July 9, 2022

Changed the distribution at Barangay Baculod, City of Ilagan.

July 11, 2022

Tune up the trunk amplifier at Barangay Baculod, City of Ilagan.

July 12, 2022

Installed the 565 wire at Barangay Bagumbayan and installed the trunk

amplifier.

July 13, 2022

Installed the cable connection in Alibagu and installed the internet

connection in Baculud.

July 14, 2022

Pulled out RJ11 cable wire at Barangay Alibagu and installed the RJ11

cable wire at Barangay Baculod, City of Ilagan.

July 15, 2022

Changed the LGF at Barangay Baculod and checked line at Barangay

Camunatan, City of Ilagan.

17
July 16, 2022

Installed the RJ11 cable wire at Villa Jesusa Subdivision, Alibagu, City of

Ilagan.

July 18, 2022

Checked line at Barangay Baculod and replaced the RJ60 connector.

July 19, 2022

Collected the cable fee bill of subscribers at Barangay Bagumbayan, City

of Ilagan.

July 20, 2022

Checked line at Barangay Camunatan, City of Ilagan and changed the

RJ60 connector.

July 21, 2022

Changed the cable connection at Barangay Alibagu, City of Ilagan,

Isabela.

July 22, 2022

Changed the co wax at Barangay Calamagui 1 st and checked line at

Barangay Camunatan, City of Ilagan.

July 25, 2022

Installed the internet connection at Barangay Lullutan and installed internet

in Barangay Naguillian Sur.

July 28, 2022

18
Checked line at Barangay Baculod and checked the trunk amplifier.

July 29, 2022

Installed the Internet connection at Barangay Alibagu, City of Ilagan and

changed the modem in Imelda Bliss Village.

July 30, 2022

Installed cable and internet connection at Barangay Baculod.

August 1, 2022

Checked line at Barangay Alibagu and checked the internet connection in

City Homes

August 2, 2022

Installed the internet connection in Baligatan and changed the modem in

Barangay Imelda Bliss Village.

August 3, 2022

Checked the main line wire at Barangay Alibagu and checked the power

supply near Isabela Doctors General Hospital.

August 4, 2022

Disconnected cable line connection at Barangay Imelda Bliss Village and

Barangay Fugu, City of Ilagan and collected the cable fee bill of

subscribers.

August 5, 2022

19
Cut the internet connection in Capitol Hills and reconnect the cable in City

Homes.

August 6, 2022

Cut the internet connection in Barangay Lullutan and cut the internet in

Calamagui 2nd.

August 8, 2022

Cut the cable connection in Villa Jesusa and cut the internet connection in

Imelda Bliss Village.

August 9, 2022

Checked line at Barangay Baculod and changed the modem in Barangay

Guinatan City of Ilagan

August 10, 2022

Checked the 565 main cable wire at Capitol Hills Subdivision, Barangay

Alibagu, City of Ilagan.

August 11, 2022

Installed grounding wire at Barangay Camunatan, City of Ilagan and

checked the frequency of amplifier.

August 12, 2022

Pulled out the cable wire at Villa Jesusa Subdivision and installed the

cable wire at Centro Poblacion, City of Ilagan.

20
August 13, 2022

Installed the grounding wire at Barangay San Vicente, City of Ilagan.

August 15, 2022

Changed main cable line at South Francisca Village, Barangay Alibagu

and checked the amplifier section line to tune up the cable connection.

August 16, 2022

Checked line at Barangay Alibagu and checked the internet connection in

City Homes

August 17, 2022

Pulled out the RJ11 cable wire at Barangay Bliss Village and checked the

main line at Barangay Alibagu City of Ilagan.

21
DAILY TIME RECORD

JUNE 2022

22
JULY 2022

23
24
AUGUST 2022

25
 PHOTOS IN ACTION

Basic Troubleshooting of subcriber Fiber line due to cut-line.

Basic operation in Fiber fusion splicing device.

1.

26
 PHOTOS IN ACTION

Maintenance and cleaning of all tools and hardware’s.

Basic Actual Installation of Distributions (NAP-BOX OUT).

27
 PHOTOS IN ACTION
Happy moments with my Co-Trainee’s

CHAPTER IV

28
 RESULTS AND DISCUSSION

Personal related to work

As a beginner, staying in Polaris Cable Vision Inc., was viewed as

opportunity to conduct self- adjustment in the workplace. At times, we felt

nervous when we met the head technician of the shop but gradually, we

had adjusted ourselves to the new environment. Though the work was

challenging for us, all the problems we met were solved. As a student

trainee, I believe that no work is hard as long as there is willingness and all

the instruction are clear.

Work

The employees/workers look at the manager as a model who gives

directions facilities and development. As a trainee, I admired our trainers

for their patience and dedication to their work. Working with them was a

fulfillment because I also dreamt of becoming a manager someday.

29
Positive attitude made me realize that in order to be successful in life, the

following attributes must be possessed; determination, self-confidence,

and good decision making. The manager also shared extra knowledge and

information in running up a business which I found advantageous on my

part in the future.

Reminiscing the times that we have worked together, I felt like a

regular employee and not a trainee. Trainers taught me how to entertain

and convince costumers properly. I am glad because the manager was

satisfied with my performance. I am also proud of myself because I did a

great job and I developed my ability to be a competent and efficient

worker.

Workmates

During my training, I experienced working with technicians who were

already efficient and effective in their work. They are already experts.

Working with them was really rewarding because they contributed ideas,

enhanced my prior knowledge and gave me some tips and techniques in

repairing. I am thankful to our unselfish brown lines technician for they

disclosed the service modes for Cable Connection even though it is a

trade secret for others.

Supervisor

30
 The student trainee was very lucky to have a supportive,

approachable, and cooperative supervisor who was always there to

correct and instruct me in what to do. He was approachable and

hospitable.

CHAPTER V

SUMMARY, CONCLUSION AND RECOMMENDATIONS

Summary

Completing on-the-job training is helpful in gaining knowledge,

skills, obtaining new ideas, to help you to become more patient and

enhance the ability of communicating or dealing with other people. It is the

preparation of the trainee for his/her future. On-the-job training gave you

the desire of dreaming and putting it into reality. Some of the trainees,

taking it for granted not knowing the importance of it in their lives. In

31
pursuing goals in life, you need to be dedicated in performing your job and

learn to love it for you to be successful.

Conclusions

Having undertaken an on-the-job training under the degree of

Bachelor of Science in Industrial Technology, I can say that encountering

different types of difficulties will never be a hindrance in completing

training. This training served as our practice for our future jobs. Upon

taking requirements, I started to dream and wish to have my own service

shop someday. I developed this desire because I was inspired by the

owner of PCVI and I would like to experience the feeling of managing and

having my own service shop.

Recommendations

It is highly recommended that the shop continues to render quality

work and service and satisfy and convince clienteles;

To the Board of Directors, to provide another branch in Cauayan

City, Isabela and to reach out to other towns, cities and provinces like

Cordon, Solano, Nueva Ecija, Nueva Viscaya and Cagayan. And to always

prioritize the welfare of PCVI workers and technicians, that they should

keep working efficiently for the benefit of the shop.

Problem Encountered

32
 Problems are everywhere and anywhere. Problem is a part of our

daily life. But as what people say, there is always a solution to every

problem or difficulty.

During my training, the problem that I encountered was the

exhaustion felt when we conducted service outside the province. The

scorching heat of the sun or the weather in general was a big challenge to

anybody.

Comments

To every company or any business firm existing today, there is

always a positive or negative comment about its service.

The following are my comments:

The services rendered to the customers were satisfying and convincing;

The manager is devoted and dedicated to his work; and

The technicians are well-experienced and expert in their work

33
CERTIFICATION
EVALUATION FORM

35
EDITOR’S CERTIFICATION

36
 CURRICULUM VITAE

CURRICULUM VITAE

CHRISTIAN J. GARCIA
Address:Imelda Bliss Village City Of Ilagan, Isabela
Mobile No.0905-786-9365
Email Address:[email protected]

______________________________________________
____
OBJECTIVE
Pursuing opportunity which allow me to grow professionally, while
effectively utilizing my versatile skill set tto help promote your corporate mission
and exceed team goals.

SUMMARY OF QUALIFICATIONS

Extremely motivated and passionate in whatever I choose to do. Strong

Interpersonal and communication skills and know how to handle and deal with
different kinds of people and circumstances. Equally effective working
independently and in cooperqtion with others.

PERSONAL INFORMATION
Home Address: Purok 4, Imelda Bliss Ilagan, Isabela
Birthday: January 22, 2000
Age: 22 years’ old
Gender: Male
Status: Single
Citizenship: Filipino
Religion: Roman Catholic
Height: 5’7”/ft.
Weight: 80kgs.
Language/Dialect: Ilocano/Tagalog

37
EDUCATIONAL ATTAINMENT
College: Bachelor of Science in Industrial Technology
Major in Electronics
Isabela State University, Ilagan Campus (ISU-I)
2022-Present

Senior High School: Isabela National High School (INHS)

San Vicente, Ilagan
2016-2018

Junior High School: Isabela National High School (INHS)

San Vicente, Ilagan
2012-2016

Elementary: Ilagan East Central School (IECS)

Centro Pob. Ilagan
2006-2012

SKILLS
Testing
Troubleshooting
Repair
Installation
Problem Solving
Interpersonal Skills

On-The-Job Training (OJT)

Polaris Cable Vision Inc.

Responsibilities
Installed cable and internet connection

WORK EXPERIENCE

McDonald’s Corporation- Centro Mall Alibagu Ilagan City, Isabela

September - December 2019

Special Program for the Employment of Students (SPES) – LGU Ilagan

City
October 2016 - June 2019

REFERENCE

38
Ms. Noralyn G. Cammagay
HR at Puregold
Tumauni Branch, Isabela

I hereby certify that the above information is true and correct to the
best of my knowledge and belief.

_________________________
CHRISTIAN J. GARCIA
Applicant

39