SA-110

SERVICE MANUAL

SME100000023
 TABLE OF CONTENTS

INSTRUCTION FOR USE ..................................................................................... 2

PREPARING TO USE THE SCALE....................................................................... 2

CHAPTER 1 INTRODUCTION .............................................................................. 3

1-1 PRODUCT FEATURES ............................................................................. 3
1-2 KEYBOARD FUNCTION ........................................................................... 4
1-3 ERROR MESSAGES ................................................................................ 6

CHAPTER 2 SERVICE MODE ACCESS............................................................... 7

F0 ⇒ PROGRAM VERSION NUMBER ........................................................... 8
F1 ⇒ LINEARITY CALIBRATION.................................................................... 9
F2 ⇒ SPECIFICATION SETTINGS............................................................... 11
APPENDIX 1 SPECIFICATION CODE TABLE .............................................. 12
APPENDIX 2 DOUBLE UNITS (kg&100g), APPLICABLE TO EUROPE ....... 14
APPENDIX 3 KEYBOARD TESTING CODE ................................................. 14
F3 ⇒ WEIGHT CALIBRATION ...................................................................... 15
F4 ⇒ EXCHANGE RATE SETTING .............................................................. 16
F5 ⇒ NC CURRENCY COUNTRY SETTING ............................................... 18
F6 ⇒ NATIONAL CURRENCY SELECTION ................................................. 19
F7 ⇒ SHIFT KEY SETTING (UNLOCK/LOCK) ............................................. 20
F8 ⇒ F4 KEY SETTING ................................................................................ 21
F9 ⇒ G VALUE SETTING ............................................................................. 22

1 SME100000023
INSTRUCTION FOR USE

Thank you for purchasing this Price Computing Scale.

To enable you to use this scale correctly, we suggest that you read these
instruction carefully.
1. It must be prevented from getting wet. If it gets wet, please wipe it dry with a
cloth. If there is something wrong with the machine, please contact your
supplier.
2. Keep it away from high temperatures and damp conditions.
3. Don’t bump the scale against other items, nor load it with excessively heavy
weights (The load must not exceed the maximum capacity of the scale).
4. If the indicator is not going to be used for some time, please clean it and store it
in a plastic bag in dry conditions. A desiccant sachet may be included to
prevent any moisture build up.
5. Objects to be weighed should be placed at the center of the platter, and can’t
exceed the dimension of the platter.
6. Any opinions and suggestions on this product are welcome.

PREPARING TO USE THE SCALE

1. Please locate the precision scale on a stable, flat desk and don’t put it on a
shaking or unstable desk. Adjust the four leveling feet to make the scale
horizontal. Make sure that the bubble level is in the center of the circle.
2. Keep the scale away from places with strong drafts or excessive temperature
fluctuations (e.g. from direct sunlight or the air louver of an air conditioner).
3. Please use an independent power outlet to avoid interruption by other electrical
appliances.
4. Don’t put any object on the scale while switching on the scale.
5. Please keep the scale switched on for 15~20 minutes before operation.
6. When the low battery indicator appears in the right corner of the display,
replace the dry batteries or recharge the battery.

2 SME100000023
CHAPTER 1 INTRODUCTION
1-1 PRODUCT FEATURES

♦Auto calibration
♦Selectable different digits of decimal point
♦Vendor and customer sides LCD display with LED backlight
♦Adjustable display rate
♦Unit price and tare value fixed display setting
♦Adjustable gravity value
♦Low power and charging status indication
♦Easily adjusted levelling feet for stability of the scale

3 SME100000023
1-2 KEYBOARD FUNCTION

0 9
~ : Numeral key. Press the keys to input the numbers (0 ~ 9).

00 : press the key once to enter a double zero ‘00’

kg
100g : Press the key, and press the 1 key to select price unit “kg”.
Press the key, and press the 2 key to select price unit “100g”.
The indication “3” will be displayed on the UNIT PRICE.

NCU
€ : Shift key. (Euro / NC).

Key in unit price in pricing mode, the TOTAL PRICE displays the Total
price of them.
Press this key again, the TOTAL PRICE displays the converted total
price; the UNIT PRICE will display the NC (national currency) symbol. In
this mode, it can not continue to weigh another item until it is pressed this
key once again to return to the pricing mode.

CE : Clear Key. Press the key to clear the unit price.

C : Clear Key. Press the key to clear the last digit of unit price.

0
: Zero key. Press the key to re-zero the scale, and the zero range is ± 2
% of full capacity.

T
: Tare key.
Press the key once to deduct the container weight. And the tare
indication “3” is displayed in the WEIGHT. When the objects are
removed from the weigh pan, WEIGHT will display a negative value.
In the FIX mode, press the key once again to exit the Tare Function
and the tare indication “3” goes off.

4 SME100000023

If the weight value is negative and the tare is not active then press the
key 0 to zero the scale.

Multi-tare function: A negative tare value is not allowed. The tare

range could extend to 4 digits.

FIX : Shifted the FIX unit price mode (on / off).

FIX mode off ⇒ FIX indication “3” goes off in TOTAL PRICE

I Weight is at zero, the unit price will be automatically cleared after 2

seconds.

II In the taring mode, after the object is removed from the weigh
pan, the tare value will be cleared automatically.

FIX mode on ⇒ FIX “3” sign is on in TOTAL PRICE

I Weight is at zero or at any weight,

Press CE key to clear the unit price.

II In the taring mode, after the object is removed from the weigh pan,
the WEIGHT will display the negative value,
press T
key to clear the tare value.

: Confirm key.

5 SME100000023
1-3 ERROR MESSAGES

AD value 0 220,000 320,000 …… 524,288

E7 Zero range at switching on E6

(Normal condition)

Suggestion: Internal value should be within 220,000 ~ 320,000 before

linearity calibration and weight calibration otherwise adjust resistance of R30
and R31 until the internal value is within this range, or change the load cell.

⇒ ZERO (after calibration) is over +10% of TOTAL SPAN

⇒ ZERO (after calibration) is under-10% of TOTAL SPAN

⇒ ZERO (before calibration) is higher than 320,000

⇒ ZERO (before calibratetion) is lower than 220,000

⇒ WEIGHT shown on the display is over the maximum

capacity+9d (9 divisions)

NOTES BEFORE FUNCTION SETTING

♦ Before enter the calibration mode, remove the mini jumper SWA1 on the
board to the ADJ position.

♦ Completed the calibration; remove the mini jumper SWA1 on the board back
to the LOCK position.

♦ F6 is not protected by the calibration switch and can be accessed at any

time.
♦ Except the desired need, no linearity calibration is available.
♦ Finished function setting, set F8 on LOCK position.

6 SME100000023
CHAPTER 2 SERVICE MODE ACCESS
Press and hold the key, and switch the scale on. The scale resets back to
zero and enter the Function setting mode.
Press T key in turn, the WEIGHT will display F0 ~ F9 in cycle.

Program Version No.

Press the T key Remark:

♦ F0, F1, F2, F3, F5, F7, F8 can
only be set while Hardware
Linearity Calibration
SWA1 is in the ADJ position.
Press the T key
♦ F6 can be altered with Hardware
SWA1 in LOCK or ADJ
Specification Setting positions.

Press the T key ♦ F4 can only be set while F8 is in

the UNLOCK condition.

Weight Calibration ♦ F9 can be set while Hardware is

in the ADJ position and LOCK
Press the T key position.

Currency Exchange ♦ When SWA1 in the ADJ position,

Rate Setting Counter’s time is 1 for G Value.
When SWA1 in the LOCK
T
position, Counter’s time is add 1
Press the key automatically.
Exchange Currency G Value can’t be changed when
Selection times of counter is over 10.

Press the T key

Base Currency Selection

Press the T key

Shift Key Locked

Press the T key

Lock or Unlock for F4

Press the T key

G Value Setting

Press the T key

7 SME100000023
F0 ⇒ PROGRAM VERSION NUMBER

WEIGHT UNIT PRICE TOTAL PRICE

Program Ver. No.

T
♦ Press key to continue the next function setting.

00
♦ Press key to return to the weighing mode.

8 SME100000023
F1 ⇒ LINEARITY CALIBRATION

The linearity calibration should be done with 3 points.

Press the 9 key to return to the weighing mode.

The example is for a 30kg capacity scale as following.

WEIGHT UNIT PRICE TOTAL PRICE

Press the 0 key, LCD displays as following.

WEIGHT UNIT PRICE TOTAL PRICE

. xxxxxx

Initial point Span value (without weigh pan)

Place the weigh pan on the scale, LCD displays as following.

WEIGHT UNIT PRICE TOTAL PRICE

. xxxxxx

Initial point Span value (with weigh pan)

Press the 00 key to memorize the Initial Value. After the scale is stable, place
the first weight on the weigh pan (ex.10kg), LCD displays as following.

WEIGHT UNIT PRICE TOTAL PRICE

. xxxxxx

The first point Span value (with weigh pan and 10kg mass)

9 SME100000023
Press the 00 key to memorize the first point of linearity calibration. After the
scale is stable, place the second weight 10kg on the weigh pan, LCD displays as
following.

WEIGHT UNIT PRICE TOTAL PRICE

. xxxxxx

The Second point Span value (with weigh pan and 20kg mass)

Press the
00 key to memorize the second point of linearity calibration. After the
scale is stable, place the third weight 10kg on the weigh pan, LCD displays as
following.

WEIGHT UNIT PRICE TOTAL PRICE

. xxxxxx

The Third point Span value (with weigh pan and 30kg mass)

Press the 00 key to memorize the third point of linearity calibration.

WEIGHT UNIT PRICE TOTAL PRICE

Take the weights off the weigh pan before the scale resets back to zero. And the
calibration procedure is completed.

10 SME100000023
F2 ⇒ SPECIFICATION SETTINGS
WEIGHT UNIT PRICE TOTAL PRICE

. .

Press the 0 key to enter the keyboard testing mode, LCD displays as
following.

WEIGHT UNIT PRICE TOTAL PRICE

XX

Keyboard code (Ref. to Appendix 3)

0
⇒ Shift to left

Press the
↵ key to input the number into bits (a~j).
T
⇒ Shift to right

(Ref. to Appendix 1)
WEIGHT UNIT PRICE TOTAL PRICE

 

(a) (b) (c) (d) (e) (f) (g) (h) (i) (j) fixed as 0

Press the ↵ key, LCD displays as following.

WEIGHT UNIT PRICE TOTAL PRICE

 

↵
Press the key, the scale resets back to zero automatically. The specification
procedure is completed.

11 SME100000023
APPENDIX 1 SPECIFICATION CODE TABLE

(a)(b) ⇒ program TABLE list specs code(Refer appendix 2 for spec codes)
(c) ⇒ Decimal point of Euro( € ) Unit Price and Total Price
(d) ⇒ Decimal point of NCU for Unit Price and Total Price
0 = no decimal point for Unit Price and Total Price
1 = 1 decimal point for Unit Price and Total Price
2 = 2 decimal point for Unit Price and Total Price
4 = 2 decimal point for Unit Price, 0 decimal point for Total Price
5 = 2 decimal point for Unit Price, 1 decimal point for Total Price
6 = 2 decimal point for Unit Price, 2 decimal point for Total Price
(e) ⇒ Last rounding for Total Price in Euro( € )
( f ) ⇒ Last rounding for Total Price in NCU
1 = Last rounding for Total Price : 0 ~ 9
3 = Last rounding for Total Price : 0 or 5
4 = Last rounding for Total Price: 10/20/30......
5 = Last rounding for Total Price : 00/50/00/50
( g ) ⇒ 0 = Euro and NCU can be exchanged .( NCU/€ key unlock )
1 = Euro only. ( NCU/€ key lock )
2 = NCU only. ( NCU/€ key lock )
( h ) ⇒ Parameter setting
Para.(Decimalism) bit2 bit1 bit0
0 0 0 0
1 0 0 1
2 0 1 0
3 0 1 1
4 1 0 0
5 1 0 1
6 1 1 0
7 1 1 1

bit0 ⇒ 1 = America and Canada approved models: In the tare mode,

the tarred value cannot be cancelled by pressing the Z key.
0 = In the tare mode, the tarred value can be cancelled by
pressing the Z key.
bit1 ⇒ 1 = Sri Lanka approved models: Zero tracking, manual
re-zeroing, ±4% Full Scale

12 SME100000023
 0 = OIML, NTEP, America and Canada approved models:
Zero tracking, manual re-zeroing, ±2% of Full Scale
Zero range at switching on is ±10% of Full Scale(OIML, NTEP)
(applicable to USA, Canada)
bit2 ⇒ 1 = 4 digits for Unit Price, (Approved regulation in America and
Canada)
0 = 5 digits for Unit Price (Normal condition)
( i ) ⇒ EEPROM if memorized Exchange Rate (00~09)(Ref Page13)

bit0 ⇒ 1 = No data inside EEPROM (applicable to USA$ Canada)

0 = Data memorized inside EEPROM (applicable to Euro)
bit1 ⇒ 1 = Decimal point key has no function. And Tare mode: can only
be tared once. (applicable to Brazil)
0 = Decimal point key is functional. (00)

(i) ⇒Lb calibration/ 100g Unit Price is not need/ FIX or repack key is not
functional.

bit0 ⇒ 1 = After calibrating the weight with lb, Unit Price is fixed in the
lb position.
0 = After calibrating the weight with kg, the scale will memorize
the current unit price when it is switched off. And will be
show it directly when switched on in next time.
bit1 ⇒ 1 = Unit Price (100g) is not needed.
0 =Unit Price (100g) is needed.
bit2 ⇒ 1 = FIX or Prepack is not functional
0 = FIX or Prepack is active.

NOTICE:

Applicable to Europe
a
Depends on request
b
c⇒2
d ⇒ depends on the local currency
e⇒1
f ⇒ depends on the local currency
g ⇒ depends on request
h⇒1
i⇒0
j⇒0

13 SME100000023
APPENDIX 2 DOUBLE UNITS (kg&100g), APPLICABLE TO
EUROPE

SPEC CODE CAP./DIV. 0 INDICATION EXTERNAL DIV.

01 3000g/1g 0g 1/3000
02 3kg/1g 0.000 kg 1/3000
03 6000g/2g 0g 1/3000
04 6kg/2g 0.000 kg 1/3000
05 15kg/5g 0.000 kg 1/3000
06 30kg/10g 0.00 kg 1/3000
07 30kg/0.010kg 0.000kg 1/3000
08 60kg/20g 0.00 kg 1/3000
09 3000g/0.5g 0.0 g 1/6000
10 6000g/1g 0g 1/6000
11 6kg/1g 0.000 kg 1/6000
12 15kg/2g 0.000 kg 1/7500
13 30kg/5g 0.000 kg 1/6000
14 60kg/10g 0.00 kg 1/6000

APPENDIX 3 KEYBOARD TESTING CODE

Applicable to Europe:

7 8 9 73 63 53 43
kg NCU
4 5 6 70 60 50 40 30
100g € ⇒
1 2 3 CE C 72 62 52 42 32

0 00 FIX →0← 71 61 51 41 31
T

14 SME100000023
F3 ⇒ WEIGHT CALIBRATION

WEIGHT UNIT PRICE TOTAL PRICE

Press the 0 key, LCD displays as following.

WEIGHT UNIT PRICE TOTAL PRICE

. xxxxxx

Internal value

Make sure there is nothing on the pan and press the ↵ key to record the zero
point. After the scale is stable, WEIGHT will display the full capacity weight value.
(Ex: 30kg) LCD displays as following.

WEIGHT UNIT PRICE TOTAL PRICE

. xxxxxx

Full capacity Calibration Unit: kg internal value

When the calibration unit is lb

Shows

Place the weight 30kg (full capacity) on the pan and press the ↵ key to record
the zero point. LCD displays as following.

WEIGHT UNIT PRICE TOTAL PRICE

Take the weights off the weigh pan before the scale resets back to zero. And the
calibration procedure is completed.

15 SME100000023
F4 ⇒ EXCHANGE RATE SETTING

To access F4, put F8 to the UNLOCK position.

F4 can be accessed without LOCK and ADJ.

Up to 24 currencies can be configured. And the exchange rate of these 24
groups can be changed if required.

The exchange rate from 00 ~ 09 groups are memorized as a table in the EEPROM.

The currency codes & exchange rates in various nations:

Decimal
CODE COUNTRIES Digits 1 Euro = XXXXXX NCU SYMBOL
00 Germany 2 1 EUR = 1.95583 DEM
01 Belgium/ Luxembourg 0 1 EUR = 40.3399 BEF
02 Spain 0 1 EUR = 166.386 PEA
03 France 2 1 EUR = 6.55957 FRE
04 Ireland 2 1 EUR = 0.787564 IEP
05 Italy 0 1 EUR = 1936.27 ITL
06 Netherlands 2 1 EUR = 2.20371 NLG
07 Austria 1 1 EUR = 13.7603 ATS
08 Portugal 0 1 EUR = 200.482 ESC
09 Finland 2 1 EUR = 5.94573 FIM
10 England 2
11 Switzerland 2
12 Sweden/Norway/Denmark 2
13 Slovakia 1
14 Slovenia 1
15 Czech Republic 1
16 Hungary 0
17 Poland 2
18 Greece 0
EURO 2

16 SME100000023
HOW TO CHANGE THE EXCHANGE RATE:
WEIGHT UNIT PRICE TOTAL PRICE

0
Press the key, LCD displays as following.

WEIGHT UNIT PRICE TOTAL PRICE

NC symbol Country code Decimals digits

Exchange rate (not including decimals)

Press the T key in turn to select the desired exchange rate.

For Example: 1 EUR = 0.787564 IEP

WEIGHT UNIT PRICE TOTAL PRICE

NC symbol Country code Decimals of exchange ⇒ 5

Exchange rate (not including decimal) ⇒ 078756

↵
After keying in the number, press the key to confirm, and the scale resets
back to zero. And the setting procedure is completed.

♦ To re-key in the value, press the CE key to key in the new value.

♦ To absorb the setting, press the 00 key to exit the setting mode.

17 SME100000023
F5 ⇒ NC CURRENCY COUNTRY SETTING

WEIGHT UNIT PRICE TOTAL PRICE

Press the 0 key, LCD displays as following.

WEIGHT UNIT PRICE TOTAL PRICE

NC symbol Country code

(The previous value) (The previous value)

Use the numeric key to key in the Country Code, and press the
↵ key to
confirm. And the setting procedure is completed.

CE
♦ To re-key in the value, press the key to key in the new value.

♦ To absorb the setting, press the 00 key to exit the setting mode.

18 SME100000023
F6 ⇒ NATIONAL CURRENCY SELECTION

WEIGHT UNIT PRICE TOTAL PRICE

Press the 0 key, LCD displays as following.

WEIGHT UNIT PRICE TOTAL PRICE

Previous value

T
Press the key to select (Euro) or (National currency)

Press the
↵ key to confirm, the setting procedure is completed.

♦ To abort the setting, press the 00 key to exit the setting mode before
pressing
↵ key.

19 SME100000023
F7 ⇒ SHIFT KEY SETTING (UNLOCK/LOCK)

WEIGHT UNIT PRICE TOTAL PRICE

0
Press the key, LCD displays as following.

WEIGHT UNIT PRICE TOTAL PRICE

Previous setting ⇒ UNLOCK

T
Press the key to select or , and press the

↵ key to confirm. The setting procedure is completed.

20 SME100000023
F8 ⇒ F4 KEY SETTING

WEIGHT UNIT PRICE TOTAL PRICE

0
Press the key, LCD displays as following.

WEIGHT UNIT PRICE TOTAL PRICE

Press the T
key to select or , and press the

↵
key to confirm. The setting procedure is completed.

21 SME100000023
F9 ⇒ G VALUE SETTING

When SWA1 in the ADJ position

<1> G Value is be calibrated G Value before weighing calibration setting.
<2> G Value is the local G Value before weighing calibration setting.
<3> after setting above, the Counter is 1 as the first local G value setting .

WEIGHT UNIT PRICE TOTAL PRICE

Press the 0 key

WEIGHT UNIT PRICE TOTAL PRICE

Initial Counter

Use the numeral key 0 ~ 9 to input the G Value. After inputting, press
the ↵ key to confirm. The setting procedure is completed.

♦ Press the 00 key before press the ↵ key to quit the setting mode.

22 SME100000023
When SWA1 in the LOCK position
<1> G Value is local G Value when SWA 1 in the LOCK position. And the Counter
adds 1 automatically.
<2> When the Counter is set over 10 times, G Value can’t be changed. If G Value
need to be changed, set SWA1 in the ADJ position, and Counter is set as 1.
WEIGHT UNIT PRICE TOTAL PRICE

Press the 0 key to check the set data, and use the 0 and the T keys to show
the data in turn.
WEIGHT UNIT PRICE TOTAL PRICE

. n
Displays the last one G Value
0 T

WEIGHT UNIT PRICE TOTAL PRICE

. n-1
0 T
Displays the n-1 G value
WEIGHT UNIT PRICE TOTAL PRICE

Displays 0 as the G value of the place

where the weight calibration is done.

0
Press the key to enter the G Value setting mode. And press the 00 key to
quit the G Value setting mode.
WEIGHT UNIT PRICE TOTAL PRICE

. n+1

Counter adds1 automatically

Use the numeral key 0 ~ 9 to input the G Value. After inputting, press
the ↵ key to confirm. The setting procedure is completed.

♦ Press the 00 key before press the ↵ key to quit the setting mode.
♦ The G Value could be any number between 9.8322~9.7803.

23 SME100000023