AUTROFLAME IR FLAME DETECTOR BG-201
Interactive fire detection systemsInteractive fire detection systems
Product Datasheet
Features
• Interactive
• Different sensitivity settings possible
• Short circuit isolator in each detector
• Comprises a built-in alarm indicator (LED)
• Automatic addressing
• Solar resistant
• Very fast fire detection
• Not blinded by oil film on window
• High degree of immunity to false alarm sources
• EN54-10, EN54-17 approved
• Designed to meet the requirement of the major
maritime classification societies
Description / Application
BG-201 is a point flame detector for detection of
fires involving combustion of carbonaceous
materials.
The detector has a high IP rating making it suitable
for the harshest environments.
Performance class can be configured by the
AutroSafe/Autroprime system according to table 1.
The advanced signal processing and DYFI+
intelligence ensure that the detector has a high
immunity to any nuisance alarm source combined
with fast detection of real fires. This makes the
BG-201 detector the obvious choice for demanding
applications such as a ship’s engine room.
Note:
Accumulation of water, ice, snow or other pollution
on the sensor window may affect the sensitivity of
the detector. In order to maintain the detection
range (table 1) the glass must be cleaned regularly.
Principle
Two infrared sensors detect the infrared spectrum
from a fire. The sensors evaluate different parts of
the infrared spectrum using this information to
verify that the signals correspond to the
characteristics of a real flame.
Doc-1000332-3, 2021-01-13
bg201_cgb
Technical specifications
Weight 210 g
Materials Polycarbonate, sapphire glass
Colour Transparent / light grey
Sensitivity Ref. Table 1
Field of view Horizontal=+/-45°, Vertical=+30°/ -45° (see the Field of view diagram
below for additional EN 54-10 information)
Voltage Supplied from detector loop
Current consumption: Stand by 90 µA
Current consumption: Alarm LED on 2,1 mA
Degree of protection IP66 and 67
Working temperature -40 to +70°C
Storage temperature -50 to +70°C
Humidity 0-96 % rh, can withstand 100% condensing humidity for short periods
of time
Maintenance Cleaning of window
Service Replace if faulty
Cable size Maximum cable 2,5 mm2 / AWG14
Approvals See website
Table 1 - Performance classes (EN 54/10)
Performance class Range
Class 1 Up to 25 m
Class 2* Up to 17 m
Class 3 Up to 12 m
*In Legacy mode only class 2 is available
Table 2 – Mode selection
Mode selection, cutting of jumper J4 on PCB J4
STANDARD: AutroSafe / Autroprime mode
LEGACY: FDI compatible mode
Autronica Fire and Security AS | www.autronicafire.com | Page 2
bg201_cgb
Product Name Part number Description
BG-201 116-BG-201 AutroFlame IR flame detector
BG-201F 116-KITD-BG-201F Facade security BG-201
Dimension Drawing (mm)
119
30 33,5
Connection Al_Com loop
Pluggable
connector
Loop In +
1 2 3 4
Loop In -
Loop Out +
Loop Out -
Autronica Fire and Security AS | www.autronicafire.com | Page 3
bg201_cgb
Field of view
To comply with the directional dependence requirements for EN 54-10:2002 an angle of ±30° from 0° (0° =
Orientation of detector in same axes as flame source) should not be exceeded, based on lab testing at a distance
of approximately 5.0 ft (1.5 m).
Autronica Fire and Security AS | www.autronicafire.com | Page 4
