Radar System Using Arduino: Prof. D.A.Ghoghre, Ahire Dhanshri, Ahire Priyanka
Radar System Using Arduino: Prof. D.A.Ghoghre, Ahire Dhanshri, Ahire Priyanka
Abstract : RADAR is an object detection system which uses Microwaves. Microwaves are nothing but the radio
waves. It uses microwaves to determine the Range, Altitude and Direction or Speed of objects. The radar dish or
antenna transmits pulses of radio pulses which returns back from any object in their path. Arduino is a single
board microcontroller. It is to make using electronics in multidisciplinary projects more accessible. This project
focus at making a Radar which is efficient, cheaper and reflects all the possible techniques that a radar consists
of.
Keywords: RADAR,Microwaves,Arduino,etc.
I. Introduction
RADARis an object detection system which uses radio waves to determine the range, altitude, direction,
or speed of objects. Radar systems come in a variety of sizes and have different performance specifications.
Some radar systems are used for air-traffic control at airports and others are used for long range surveillance and
early-warning systems. A radar system is the heart of a missile guidance system. Small portable radar systems
that can be maintained and operated by one person are available as well as systems that occupy several large
rooms [1].
Radar was secretly developed by several nations before and during the World War II. The term RADAR
itself, not the actual development, was coined in 1940 by United States Navy as an acrony for Radio Detection
and ranging. The modern uses of radar are highly diverse, including air traffic control, radar, astronomy, air-
defense systems, antimissile systems, antimissile systems; marine radars to locate landmarks and other ships;
aircraft anti-collision systems; ocean surveillance systems, outer space surveillance and rendezvous systems;
meteorological precipitation monitoring; altimetry and flight control precipitation monitoring; altimetry and
flight control systems; guided missile target locating systems; and ground-penetrating radar for geological
observations. High tech radar systems are associated with digital signal processing. [1]
Ultrasonic distance sensor - ultrasonic sensor generate high frequency sound wave and evaluate the echo
which is received back by the sensor. The modules includes ultrasonic transmitters, receiver and control
circuit. The basic principle of work:
(1) Using IO trigger for at least 10us high level signal,
(2) The Module automatically sends eight 40 kHz and detect whether there is a
(3) Pulse signal back.
(4) IF the signal back, through high level , time of high output IO duration is
(5) The time from sending ultrasonic to returning.
(6) Test distance = (high level time × velocity of sound (340M/S) /2
Servo motor – It is used as a rotary actuator that allows for precise control of angular poison, velocity a
acceleration. A servo system mainly consists of three basic components - a controlled device, a output
sensor, a feedback system. This is an automatic closed loop control system. Here instead of controlling a
device by applying the variable input signal, the device is controlled by a feedback signal generated by
comparing output signal and reference input signal.
Fig:3.2:servo motor
Arduino – It is a single board microcontroller used to control the function of servo motor and ultrasonic
sensor. It sends the angular information to servo motor on which the motor rotates and sensor works as per
Buzzer – It is used for indication purpose. When an object is detected by the system buzzer rings as an
that directions.
IV. Flowchart
The flowchart shows the overall operation of system in accordance with software
V. Result
Harware Module Of Project
VI. Applications
As a security purpose.
For military application.
Object detection
VII. Conclusion
This project aims on the use of Ultrasonic Sensor by connected to the Arduino UNO R3 board and the
signal from the sensor further provided to the screen formed on the laptop to measure the presence of any
obstacle in front of the sensor as well as determine the range and angle at which the obstacle is detected by the
sensor. We implemented this project successfully and the result are obtained as per desired. Motor will rotate 15 0
to 1650 for the object detection in the range of 3meter.when the object is within the range motor will stop for
some time and on graph which is shown on the screen will indicated red color line that mean object is detected
and it also measure the distance of object from source point
References
[1]. Dr. Anuj Dutt- “Arduino Based RADAR System”
[2]. [2] Nithya.V, Robin Alias2, Sreepriya N. S, Vivek Joseph,Yathukrishna.K.T-“Ultrasonic RADAR”,Vol.4,No.3,March
2016,E-ISSN:2321-9637
[3]. http://www.arduino.cc/date-7/9/1016, time-11:35 AM
[4]. www.datasheetcatalog.com
[5]. http://www.atmel.com/atmega328