We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 4
Product Specifications for 1506A-E88TAG 8 Perkins
Gross Mechanical Output 192-358 kWm
‘Typical Electrical Output 207-389 kVA (166-312 kWe)
Rated Speed 1500/1800 rpm
Prime 207-308 kVA
Standby 228-337 KVA
Prime 198-282 KWe
Standby 218-312 kWe
Fuel Optimised
Number of Cylinders 6 vertical inline
Boro 12 mm
Stroke 149 mm
Displacement asl
Compression Ratio ten
Aspiration Turbocharged aftercooled
Combustion System Direct injection
Rotation from Fiywheel End Anti-clockwise Cooling System Liquid
Aftertreatment -
‘Typical Alternator Ef 92%
‘Switchable Yes
Length 1941 mm
Wiath 1013 mm
Height 1368 mm
Dry Weight 1156 kg
Note1 “Final dimensions dependent on selected options,
Prime Power Variable load. Unlimited hours usage with an average load of 70% of the published prime power
rating. A 10% overioad is available for 1 hour in every 12 hours of operation.
Standby Power Variable load. Limited to 500 hours annual usage up to 300 hours of which may be continuous
running. No overload is permitted. 1506A-E88TAG Standard Equipment
Air inlet system
Mounted air filter and turbocharger
Cooling system
Air-to-air charge cooler incorporated in radiator
Mounted belt driven pusher fan
Radiator supplied loose with all guards and pipes
Thermostatically controlled with belt driven, circulating pump and belt-drive fan
Electrical equipment
24 volt starter motor and 24 volt 45 amp alternator with DC output
ECM mounted on engine with wiring looms and sensors
Flywheels and flywheel housing
Aluminium SAE 1 flywheel housing
High inertia flywheel to SAE 1 J620 Size 355.6 mm (14 in)
Fuel system
Electronic governing to ISO 8528-5 with stand-alone isochronous and load-sharing capabilities
Fuel filter, fuel transfer pump, fuel priming pump
HEUI fuel system with full authority electronic control
Spin on primary, secondary and water filter separator
Mountings
Front engine mounting bracket
Oil system
Full flow spin-on filters
Oil pump gear driven
Wet full aluminium sump with filler and dipstick
