AOC4518R04v07
D08X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690-8x65-
2x15.5i/2x17.5i/2x17.5i/2x18i-8xM-R
EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2) 2 x (1695 - 2200) (Lb1/Rb2) 2 x (2490 - 2690)
Frequency range (MHz)
690 - 803 790 - 862 824 - 894 880 - 960 1695 - 1990 1920 - 2200 (Ly1/Ry4)
Polarization +45° , -45°
2 - 11 , continuously adjustable, each band
Electrical downtilt (°) 2 - 14 , continuously adjustable, each band separately
separately
at mid Tilt 14.7 14.9 15.1 15.3 17.2 17.7 18.3
Gain (dBi)
over all Tilts 14.7 ±0.6 14.9 ±0.5 15.1 ±0.5 15.3 ±0.6 17.2 ±0.7 17.7 ±0.7 18.3 ±0.6
Side lobe suppression for first side
> 15 > 16 > 16 > 15 > 15 > 15 > 15
lobe above main beam (dB)
Horizontal 3dB beam width (°) 70 ±7 69 ±6 68 ±6 66 ±6 70 ±7 65 ±6 58 ±6
Vertical 3dB beam width (°) 11.0 ±0.8 10.1 ±0.8 9.7 ±0.7 9.0 ±0.7 6.2 ±0.6 5.6 ±0.6 4.5 ±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28
Interband isolation (dB) ≥ 27 ≥ 27
Front to back ratio , ±30° (dB) > 21 > 22 > 22 > 22 > 25 > 25 > 25
Cross polar ratio (dB) 0° > 18 > 18 > 18 > 18 > 17 > 17 > 16
Max. effective power per port (W) 400 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC Ground DC Ground
Electrical Properties
2 x (1427 - 2690) (CLy2/CRy3)
Frequency range (MHz)
1427 - 1518 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45°
Electrical downtilt (°) 2 - 12 , continuously adjustable, each band separately
at mid Tilt 15.5 17.0 17.3 17.5 17.8
Gain (dBi)
over all Tilts 15.5 ±0.7 16.9 ±0.5 17.2 ±0.5 17.4 ±0.5 17.7 ±0.5
Side lobe suppression for first side
> 15 > 16 > 16 > 16 > 15
lobe above main beam (dB)
Horizontal 3dB beam width (°) 70 ±8 69 ±6 65 ±6 60 ±6 58 ±6
Vertical 3dB beam width (°) 8.9 ±0.6 7.1 ±0.6 6.4 ±0.6 5.7 ±0.5 5.2 ±0.4
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 26 ≥ 27
Interband isolation (dB) ≥ 26 ≥ 27
Front to back ratio , ±30° (dB) > 24 > 25 > 25 > 25 > 25
Cross polar ratio (dB) 0° > 17 > 17 > 17 > 17 > 16
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
* Max. effective power whole antenna: 1200 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
1
AOC4518R04v07
D08X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690-8x65-
2x15.5i/2x17.5i/2x17.5i/2x18i-8xM-R
EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.0m
Mechanical Properties 106
Antenna dimensions (H x W x D) (mm) 2009 x 469 x 206
Packing dimensions (H x W x D) (mm) 2265 x 555 x 255
(567)
Antenna weight (kg) 37.5
Clamps weight (kg) 6.3 (2 units)
Antenna packing weight (kg) 53.5 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material GFRPP*
2009
1383
Radome colour Light grey
Operational temperature (℃) -40 .. +65
Frontal: 605 (at 150 km/h)
Wind load (N) Lateral: 370 (at 150 km/h)
Maximum: 800 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 16 x 4.3-10 Female
59
Connector position Bottom
*GFRPP: Glass Fiber Reinforced Polypropylene Unit: mm
Accessories
Item Model Description Weight Units per antenna
Downtilt kit ASMDT0H01 Mechanical downtilt: 0 - 12 ° 3.1 kg 1 (Separate packing)
Pattern sample for reference
690 - 960 MHz 1427 - 2690 MHz 1695 - 2200 MHz 2490 - 2690 MHz
(Lr1/Rr2) (CLy2/CRy3) (Lb1/Rb2) (Ly1/Ry4)
2
AOC4518R04v07
D08X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690-8x65-
2x15.5i/2x17.5i/2x17.5i/2x18i-8xM-R
EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
Power consumption (W) < 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/c RS-485B n/c RS-485A DC DC return n/c
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna
software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol
switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
c d e a HWxxxx……….Lr1
b HWxxxx………Lb1
b y1 y4
f c HWxxxx………Ly1
d HWxxxx…...CLy2
h e HWxxxx……..Ry4
b1 y2 y3 b2
f HWxxxx……..Rb2 r1 r2
a g
g HWxxxx………Rr2
h HWxxxx……CRy3
r - Red y - Yellow b- Blue
L - Left array C - Center array R - Right array
NOTE
1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
2. HUAWEI ‘s standard brackets and accessories must be used for any installation.
3. The antenna working environment must meet the requirements specified in the datasheet.
4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to requirements
described in the antenna installation guide.
5. In the effort to improve our products, all specifications are subject to change without notice.
Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna
3 Issue: 2020-11-27
