Data sheet for SINAMICS S120 control unit CU310-2 PN

Article No. : 6SL3040-1LA01-0AA0 Figure similar

Client order no. : Item no. :

Order no. : Consignment no. :
Offer no. : Project :
Remarks :

Inputs / outputs Electrical data

Digital inputs Electronics power supply DC 24 V (20.4 ... 28.8 V)

Number 11 Max. power consumption 5) 0.8 A

Voltage -3 ... 30 V Power loss, max. 20 W

Low level -3 ... 5 V Protection, max. 20 A

High level 15 ... 30 V

Communication
Power consumption at 24 V DC, typ. 3.5 mA
Communication PROFINET, EtherNet/IP
Delay time L→H, typ. 1) 50 µs
On-board encoder interface
Delay time H→L, typ. 1) 150 µs
optional incremental encoder TTL/HTL
Digital I/O Encoder evaluation or encoder SSI without incremental
signals
Number of bidirectional, not
8
potential-free inputs 3) max. load current at 24 V encoder
0.35 A
supply
As input
max. load current at 5 V encoder supply 0.35 A
Voltage -3 ... 30 V
Encoder frequency, max. 300 kHz
Low level -3 ... 5 V
SSI baudrate 100 ... 1,000 kBaud
High level 15 ... 30 V
SSI absolute position resolution 30 bit
Power consumption at 24 V DC, typ. 3.5 mA
Line length, max.
Delay time L→H 1) 5 µs
TTL encoder 6) 100 m (328.08 ft)
Delay time H→L 1) 50 µs
HTL encoder unipolar signal 100 m (328.04 ft)
As output
HTL encoder bipolar signal 300 m (984.25 ft)
Continuous short-circuit proof Yes
SSI encoder 100 m (328.08 ft)
Voltage DC 24 V

Load current per digital output, Environmental conditions

500 mA
max.
Installation altitude 2,000 m (6,561.68 ft)
Delay time L→H, typ./ max. 150 µs / 400 µs
Ambient temperature during
Delay time H→L, typ./ max. 75 µs / 100 µs
Operation 0 ... 55 °C (32 ... 131 °F)
Analog inputs
Storage -25 ... 55 °C (-13 ... 131 °F)
Number 4) 1
Transport -40 ... 70 °C (-40 ... 158 °F)
As voltage input
Relative humidity during
Voltage -10 ... 10 V
Transport, max. 95 % at 40 °C (104 °F)
12 bit + sign (with respect to the
Resolution maximum range that can be resolved -
11 ... +11 V)

Ri >100 kΩ

As current input

Voltage -20 ... 20 mA

11 bit + sign (with respect to -22 ... 22

Resolution mA); Maximum range that can be
resolved -44 ... +44 mA)

Ri >250 Ω

Technical data are subject to change! There may be discrepancies between calculated and rating plate values. Page 1 of 2 Generated Fri Mar 17 05:28:40 CET 2023
Data sheet for SINAMICS S120 control unit CU310-2 PN

Article No. : 6SL3040-1LA01-0AA0 Figure similar

Connections Measuring sockets 3

PE connection 1 (M5 screw) Number of slots

Supply voltage, max. 2.5 mm² (AWG 14) Flash card 1

Digital inputs, max. 1.5 mm² (AWG 16)

Mechanical data
Digital inputs/outputs, max. 1.5 mm² (AWG 16)
Net weight 0.95 kg (2.09 lb)
DRIVE-CLiQ 1
Dimensions
PROFINET 2
Width 73.0 mm (2.87 in)
PROFIBUS --
Height 191.0 mm (7.52 in)
RS232 --
Depth 75.0 mm (2.95 in)
Ethernet 1

Temperature sensor 1 Standards

Compliance with standards CE, KC, cULus, EAC, C-Tick (RCM)
24 V 1

1)
The specified delay times refer to the hardware. The actual reaction time depends on the time slot in which the digital input or output is processed.
3)
can be parameterized - as DI - as DO
4)
The analog input can be switched between current and voltage input.
5)
without taking into account digital outputs. Option slot extension, DRIVE-CLiQ supply and Power Module PM340
6)
Signal cables twisted in pairs and shielded

Technical data are subject to change! There may be discrepancies between calculated and rating plate values. Page 2 of 2 Generated Fri Mar 17 05:28:40 CET 2023