HYDRAULIC

HiTEC® 523
Anti-wear Hydraulic Additive Package

Low Zinc Additive, with Denison HF-0 Performance

 HYDRAULIC

HiTEC® 523 Anti-wear Hydraulic Additive Package

Low Zinc Additive, with Denison HF-0 Performance

Key Performance Benefits HiTEC® 523 Based Oil Versus Several Commercially Available
HiTEC® 523 additive is a low zinc anti-wear hydraulic package, delivering Competitor Products in the ASTM D2619 Hydrolytic Stability Test
the following benefits:
- Denison HF-0, HF-1 , HF-2 approval 1.2

Based on performance in the T6H20C hybrid pump test

Copper wt. loss, mg/cm2

1
- Meets the requirements of DIN 51524 part II, ISO 11158 HM, SAE MS 0.8
1004 HM and ASTM D6158 HM.
0.6
- FZG A/8.3/90 load stage 10 Pass
0.4
- Filterability in the presence of water Denison limit for
CU wt. loss
- Protection of yellow metals in the presence of water 0.2
4a 1a 2b
- Robust oxidation, rust and corrosion protection 0 1b
Hi T Co m Co m Co m
- Approved against Cincinnati Machine P-68, P-69 and P-70 Product Tested
EC®
523
pe
t i to
pe
t i to
pe
t i to
specifications r Fa rB r Fa
mi mi
ly A ly A
- Excellent wear protection 1 2

Demonstrated by performance in the ISO 20763 (Conestoga)

vane pump test
HiTEC® 523 Delivers Excellent Wear Protection
Recommended Dosage
The recommended dosage for HiTEC® 523 additive is 0.6% wt.
HiTEC® 523F also available for improved anti-foam performance. Please
contact your Afton Chemical representative for specific recommendations.

Typical Characteristics
Appearance: Brown oily liquid
Density at 15°C, g/ml: 0.990
Flash Point, °C (PMCC): 100 min.
Kinematic Viscosity at 40˚C, mm2/s: 66
Pistons from Parker T6H20C Pump after Wet Phase with Hitec®523 in Group I Basestocks

Handling Information
Max Handling Temp: 75°C
Shelf Life: 24 months at ambient temperature

Cam Ring from Parker T6H20C Pump after Wet Phase with HiTEC®523 in Group I Basestocks

© 2020. Afton Chemical Corporation is a wholly-owned subsidiary of NewMarket Corporation (NYSE:NEU). HiTEC® is a trademark of Afton Chemical Corporation. 12/20.
The information in this bulletin is, to our best knowledge, sure and accurate, but all recommendations or suggestions are made without guarantee since the conditions of use
are beyond our control. Afton Chemical Corporation and its affiliates disclaim any liability incurred in connection with the use of these data or suggestions. Furthermore, nothing
contained herein shall be construed as a recommendation to use any product in conflict with existing patents covering any material or its use.