www.orbitalum.
com
new
GF 4, GF 6
(AVM/MVM)
Pipe Cutting and
B eveling Machines
The new GF series sets new standards
in orbital pipe machining.
Numerous innovative functions combined
with an ergonomic design create signifi-
cant advantages for you in the industrial
prefabrication of pipeline systems.
l Also available
Your benefits: with automatic
• Square, burr-free and deformation-free pipe end or manual feed
• Cold machining process, cutting in seconds m odules AVM/
• Simultaneous or seperate cutting and beveling MVM (not avail-
• Cost-effective, increasing productivity able as a retrofit)
• Even longer tool life
Advantages:
• Anthracite-colored coated components for improved
sliding properties and protection against corrosion nable smaller length of pipe to be machined
e
• Optional feed module AVM or MVM for an automated • 1 multifunctional tool for all adjustments on the
or manual cutting process machine
• Locking mechanism prevents unauthorized usage • Extended speed range (65-215 rpm), ideal for the
and theft cutting of high-performance materials (Hastelloy ®,
• A new ergonomically-designed motor handle for a P91, etc.)
safe and comfortable operating position, which also • Swivel cable with a quick-disconnect coupler for easy
enables easy cutting of elbows and quick replacement of power cables
• Integrated line laser to determine the cut off point • The new chip guard protects against flying chips and
• 2 position clamping jaws to reduce chatter and comes with a measuring port (for GF 4 only)
precision.
power.
simplicity.
Multifunctional tool. 2 position clamping jaws to Integrated line laser The new chip guard protects
1 tool = 6 functions: enable the machining of thin to d etermine the cut off against flying chips and
Vice handle, fastening clamping walled tubes. point. comes with a measuring port
jaws, saw blades/bevel cutters, Incl. stainless steel clamping (for GF 4 only).
and quick mounting plate; attachments for protection
anti-theft p
rotection as well as against contact corrosion.
blade adjustment with the star
handle.
Pipe Cutting and Beveling Machines
Working range GF 4 GF 4 AVM GF 4 MVM GF 6 GF 6 AVM GF 6 MVM
Code number (230 V, 50/60 Hz) 790 142 001 790 142 011 790 142 021 790 143 001 790 143 011 790 143 021
[Code]
Code number (120 V, 50/60 Hz) 790 142 002 790 142 012 790 142 022 790 143 002 790 143 012 790 143 022
[mm] 12 - 120 12 - 120 12 - 120 21.3 - 168.3 21.3 - 168.3 21.3 - 168.3
OD pipes
[inch] 0.472 - 4.724 0.472 - 4.724 0.472 - 4.724 0.839 - 6.626 0.839 - 6.626 0.839 - 6.626
[mm] 1-9 1-9 1-9 1.5 - 15 1.5 - 15 1.5 - 15
Wall thickness, depends on material
[inch] 0.039 - 0.354 0.039 - 0.354 0.039 - 0.354 0.059 - 0.591 0.059 - 0.591 0.059 - 0.591
Pipe ID min. (Saw blade Ø 63 mm) [mm] 21 21 21 30 30 30
Pipe ID min. (Saw blade Ø 2.480 inch) [inch] 0.827 0.827 0.827 1.181 1.181 1.181
Pipe ID min. (Saw blade Ø 68 mm) [mm] 16 16 16 25 25 25
Pipe ID min. (Saw blade Ø 2.677 inch) [inch] 0.630 0.630 0.630 0.984 0.984 0.984
Pipe ID min. (Saw blade Ø 80 mm) [mm] 4 4 4 13 13 13
Pipe ID min. (Saw blade Ø 3.150 inch) [inch] 0.157 0.157 0.157 0.512 0.512 0.512
Pipe ID min. (Saw blade Ø 100 mm) [mm] – – – 0 0 0
Pipe ID min. (Saw blade Ø 3.937 inch) [inch] – – – 0 0 0
Pipe ID min. (Saw blade Ø 110 mm) [mm] – – – 0 0 0
Pipe ID min. (Saw blade Ø 4.331 inch) [inch] – – – 0 0 0
[kg] 55 64.5 60 92.7 101.7 97.8
Machine weight
[lbs] 121.3 142.2 132.3 204.4 224.2 215.6
Power [kW] 1.8 1.8 1.8 1.8 1.8 1.8
Power AVM [W] – 50 – – 50 –
Built-in electronic speed regulation
[rpm] 65 - 215 65 - 215 65 - 215 65 - 215 65 - 215 65 - 215
with speed stabilisation
Machine comes with
• 1 Pipe Cutting and Beveling Machine GF 4 or GF 6 (AVM/MVM)* Stamp of distributor:
• 1 Transportation case
• 1 Saw blade (GF 4: Code 790 042 064, GF 6: Code 790 043 018)
• 1 Set of stainless steel clamping attachments
• 1 Mounting plate
• 1 Tool set
• 1 Tube of saw blade lubricant GF TOP (Code 790 060 228)
• 1 Tube of special gear oil (Code 790 041 030)
• 1 Set of operating instructions and spare parts list
The technical data is non-binding. It does not include any assurance of properties.
* The automatic/manual feed module AVM/MVM is already fitted to the pipe cutter upon delivery. Subject to change. Our general terms and conditions apply.
© Orbitalum Tools GmbH (08.2011)
Orbitalum Tools GmbH, Josef-Schuettler-Str. 17, 78224 Singen, Germany
790 700 337_01_en
Sales Contact: Repair Service:
Tel. +49 (0) 77 31 792-786 up to -790 Josef-Schuettler-Str. 17
Fax +49 (0) 77 31 792-524 78224 Singen, Germany
[email protected] Tel. +49 (0) 77 31 792-764
www.orbitalum.com Fax +49 (0) 77 31 792-524
