3/14/2022 | Page 1 of 3
The Timken Company
4500 Mt Pleasant St. NW
N. Canton, OH 44720
Phone: (234) 262-3000
E-Mail:
[email protected] • Web site: www.timken.com
Part Number M268749 - M268710CD, Tapered Roller Bearings - TDO (Tapered Double
Outer) Imperial
The con guration of the TDO provides a wide effective bearing spread, making it ideal for applications in which
overturning moments are a signi cant load component. TDO bearings can be used in xed positions or allowed to oat
in the housing bore.
L
IA
C
EN
D
Speci cations | Dimensions | Abutment and Fillet Dimensions | Basic Load Ratings | Factors
FI
Speci cations
N
O
Series M268700
C
Cone Part Number M268749
Cup Part Number M268710CD
Design Unit Inch
448.48 lb
Bearing Weight
203.426 Kg
Cage Material Pin-Type
Dimensions
3/14/2022 | Page 2 of 3
16.3750 in
d - Bore
415.925 mm
23.2500 in
D - Cup Outer Diameter
590.550 mm
4.5000 in
B - Cone Width
114.300 mm
7.6250 in
C - Double Cup Width
193.675 mm
9.6249 in
T - Bearing Width across Cones
244.472 mm
Abutment and Fillet Dimensions
L
R - Cone Backface "To Clear" 0.25 in
IA
Radius1 6.4 mm
r - Cup Backface "To Clear" 0.06 in C
EN
Radius2 1.5 mm
db - Cone Backface Backing 17.76 in
D
Diameter 451 mm
FI
Da - Cup Frontface Backing 22.14 in
N
Diameter 562.36 mm
O
Aa - Cage-Cone Backface 0.34 in
Clearance 8.6 mm
C
-0.37 in
a - Effective Center Location3
-9.4 mm
Basic Load Ratings
C90 - Dynamic Radial Rating
166000 lbf
(One-Row, 90 million
740000 N
revolutions)4
C1 - Dynamic Radial Rating
1120000 lbf
(Two-Row, 1 million
4970000 N
3/14/2022 | Page 3 of 3
4970000 N
revolutions)5
C90(2) - Dynamic Radial Rating
290000 lbf
(Two-Row, 90 million
1290000 N
revolutions)6
Ca90 - Dynamic Thrust Rating 94800 lbf
(90 million revolutions)7 421000 N
Factors
K - Factor8 1.76
e - ISO Factor9 0.33
Y1 - ISO Factor10 2.03
L
IA
Y2 - ISO Factor11 3.02
Cg - Geometry Factor12 0.232 C
EN
1 These maximum llet radii will be cleared by the bearing corners.
D
2 These maximum llet radii will be cleared by the bearing corners.
FI
3 Negative value indicates effective center inside cone backface.
4 Based on 90 x 106 revolutions L life, for The Timken Company life calculation method. C and C
10 90 a90 are
N
radial and thrust values.
O
5 Based on 1 x 106 revolutions L life, for the ISO life calculation method.
10
6 Based on 90 x 106 revolutions L
10 life, for The Timken Company life calculation method. C90 and Ca90 are
C
radial and thrust values for a single-row, C90(2) is the two-row radial value.
7 Based on 90 x 106 revolutions L
10 life, for The Timken Company life calculation method. C90 and Ca90 are
radial and thrust values for a single-row, C90(2) is the two-row radial value.
8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction
on use.
9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction
on use.
10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction
on use.
11 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction
on use.
12 Geometry constant for Lubrication Life Adjustment Factor a3l.
7.6250
To clear 0.06 max 0.34
Fillet Radius
4.5000
L
16.3750
23.2500
22.14
17.76
IA
C
EN
D
FI
N
O
C
9.6249
To clear 0.25 max
Fillet Radius
IMPERIAL UNITS
ISO Factor - e 0.33
ISO Factor - Y1 2.03 M268749 - M268710CD
ISO Factor - Y2 3.02 Tapered Roller Bearings - TDO (Tapered Double
Bearing Weight 448.48 lb Outer) Imperial
Number of Rollers Per Row 36
K Factor 1.76
Dynamic Radial Rating - C90 166000 lbf
THE TIMKEN COMPANY Dynamic Thrust Rating - Ca90 94800 lbf
NORTH CANTON, OHIO USA Dynamic Radial Rating - C90(2) 290000 lbf
Radial Rating - C1 1120000 lbf
Every reasonable effort has been made to ensure the accuracy of the information contained in this writing, but no
liability is accepted for errors, omissions or for any other reason. FOR DISCUSSION ONLY
