Scribd
Upload
119 views1 page

NSD570 Teleprotection System Design

The document summarizes the mechanical design of the NSD570 teleprotection system. It consists of a 19 inch rack housing one or two NSD570 devices in a 4U space. The rack includes a bus plane with front cover, two slots for redundant power supplies, one slot for a common interface, and two sets of five slots for line and relay interfaces accessible from the back. Optional components include a display panel or LAN interface.

Uploaded by

Gela Razmadze
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
119 views1 page

NSD570 Teleprotection System Design

The document summarizes the mechanical design of the NSD570 teleprotection system. It consists of a 19 inch rack housing one or two NSD570 devices in a 4U space. The rack includes a bus plane with front cover, two slots for redundant power supplies, one slot for a common interface, and two sets of five slots for line and relay interfaces accessible from the back. Optional components include a display panel or LAN interface.

Uploaded by

Gela Razmadze
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ABB Power Grids Switzerland Ltd 1KHW000890-EN NSD570

3.3.2. Mechanical design

Supply Backplane G1LB

Analog Interface G3LA


Digital Interface G3LD
Ethernet Interface G3LE
Relay Interface G3LR, G3LS
LAN Interface G3LL, G3LM

Optional: Blanking Bus Plane with front cover G1LA


Display Panel Cover Plate
G1LC Top view
3-Rack Top View.vsd

Fig. 3-3 Mechanical design

The mechanical design of the NSD570 teleprotection system is as


follows:
- 19 inch rack, housing one or two NSD570 devices, 4 height units
(4U) including 1U for cable tray, blanking 1U plate with labeling
strip, connectors, etc.
- one bus plane with front cover for one or two NSD570 in the same
rack
- 2 slots with 8 raster units (8R) for single or redundant power supply
- 1 slot with 6R for common interface
- 2 x 5 slots for line interface and relay interfaces (accessible from the
back side of the rack, after removing of the screening cover)
- optional display panel (instead of power supply front cover plate)
- optional LAN Interface instead of 4th Relay interface in the second
half of the module rack

3-10 December 2019 System Description

You might also like