Acoplador USB Tipo C fêmea – fêmea, compatível com padrão Thunderbolt 3 e USB 3.
1
Type C Coupler – Female to Female, compatible with Thunderbolt 3 & USB 3.1 USB
Cabo adaptador USB Tipo C para Mini DisplayPort, compatível com Thunderbolt 3
USB C to Mini DisplayPort Cable Cord Adapter, Compatible Thunderbolt 3
MODELO 1
MODELO 2
MODELO 3
Pinagem de terminais.
VGA (DE-15/HD-15)
Pin out female DE15 socket
Pin 1 RED Red video
Pin 2 GREEN Green video
Pin 3 BLUE Blue video
Pin 4 ID2/RES Reserved since E-DDC, formerly
monitor id. bit 2
Pin 5 GND Ground (HSync)
Pin 6 RED_RTN Red return
Pin 7 GREEN_RTN Green return
Pin 8 BLUE_RTN Blue return
Pin 9 KEY/PWR +5 V DC (powers EDID EEPROM chip
on some monitors), formerly key
Pin 10 GND Ground (VSync, DDC)
Pin 11 ID0/RES Reserved since E-DDC, formerly monitor
id. bit 0
Pin 12 ID1/SDA I²C data since DDC2, formerly monitor
id. bit 1
Pin 13 HSync Horizontal sync
Pin 14 VSync Vertical sync
Pin 15 ID3/SCL I²C clock since DDC2, formerly monitor
id. bit 3
The image and table detail the 15-pin VESA DDC2/E-DDC connector; the diagram’s pin numbering is that
of a female connector functioning as the graphics adapter output. In the male connector, this pin
numbering corresponds with the cable’s wire-and-solder side.
HDMI
The HDMI type A male connector measures 13.9mm × 4.45mm, while the female sockets are fractionally larger
because they need to accommodate the male and they measure 14mm × 4.55mm.
Often the backshell for the HDMI type A connector seems to be relatively large for the connector size - this is
because of the large number of pin connections required.
The type A connector pinout can be seen to consist of two rows of pins with numbering alternating down the
length of the connector so that pins 1 and 2 are at one end and 18 and 19 at the other.
PIN CONNECTIONS FOR TYPE A HDMI CONNECTOR
HDMI PIN NUMBER SIGNAL
1 TMDS Date 2+
3 TMDS Data 2-
5 TMDS Data 1 shield
7 TMDS Data 0+
9 TMDS Data 0-
11 TMDS Clock shield
13 CEC
15 SCL (Serial Clock for DDC
17 DDC / CEC / HEC Ground
19 Hot Plug Detect (1.3) / HEC Data+
(1.4)
HDMI PIN NUMBER SIGNAL
2 TMDS Data 2 shield
4 TMDS Data 1+
6 TMDS Data 1-
8 TMDS Data 0 shield
10 TMDS Clock+
12 TMDS Clock-
14 HEC Data-
16 SDA (Serial Data Line for DDC
18 +5 V Power (50 mA max)
Although not all the lines may be used in every applications, all cables incorporate all the lines so that they can be
used for any application.
Mini HDMI Type C connector pinout
The mini-HDMI connector is not as common as the Type A, but it is often found on items like camcorders, DSLRs
and other forms of photographic equipment. Here size is more of an issue and there would not be space for the
full type A connector.
HDMI Type C mini plugs measure 10.42mm × 2.42mm - this makes them significantly smaller than the Type A.
The Type C mini-HDMI pinout is quite similar to that of the standard HDMI or Type A. The differences are that all
positive signals of the differential pairs are swapped with their corresponding shield, the DDC/CEC Ground is
assigned to pin 13 instead of pin 17, the CEC is assigned to pin 14 instead of pin 13, and the reserved pin is 17
instead of pin 14.
A complete pinout for the mini-HDMI is given in the table below.
PIN CONNECTIONS FOR TYPE C OR MINI-HDMI PIN CONNECTIONS FOR TYPE D OR MICRO-HDMI
CONNECTOR CONNECTOR
HDMI PIN NUMBER SIGNAL HDMI PIN NUMBER SIGNAL
1 TMDS Data2 Shield 1 Hot Plug Detect/HEAC-
2 TMDS Data2+ 2 Utility/HEAC+ (NC on device)
3 TMDS Data2- 3 TMDS Data2+
4 TMDS Data1 Shield 4 TMDS Data2 Shield
5 TMDS Data1+ 5 TMDS Data2-
6 TMDS Data1- 6 TMDS Data1+
7 TMDS Data0 Shield 7 TMDS Data1 Shield
8 TMDS Data0+ 8 TMDS Data1-
9 TMDS Data0- 9 TMDS Data0+
10 TMDS Clock Shield 10 TMDS Data0 Shield
11 TMDS Clock+ 11 TMDS Data0-
12 TMDS Clock- 12 TMDS Clock+
13 DDC/CEC Ground 13 TMDS Clock Shield
14 CEC 14 TMDS Clock-
15 SCL (DDC lock) 15 CEC (Control)
16 SDA (DDC data) 16 DDC/CEC/HEAC Ground
17 HEC+ 17 SCL (DDC clock)
18 +5 V Power (power EDID/DDC) 18 SDA (DDC data)
19 Hot Plug Detect/HEC- 19 +5 V Power (power EDID/DDC)
- Shell (Ground)
Pinout for micro-HDMI connector
The micro-HDMI connector is not seen as widely as the Type A or C versions. Nevertheless it is intended
for audio visual applications on much smaller electronic devices like smartphones and other similar
devices that might need full HDMI capability.
The micro-HDMI is obviously much smaller than the Type A standard HDMI connector, or the Type C
mini-HDMI, but it keeps keeps the same number of 19 pins in common with types A and C.
Mini DisplayPort
The Mini DisplayPort (MiniDP or mDP) is a miniaturized version of the DisplayPort audio-visual digital interface.
Mini DisplayPort is capable of driving display devices with resolutions up to 2560x1600. Mostly used in new Apple
computers: MacBook, MacBook Pro, MacBook Air, iMac, Mac mini, Mac Pro, and Xserve, but also fits to some PC
notebooks.
Pin Number Pin Name Description
1 GND Ground
2 HPD Hot plug detect
3 ML_Lane 0 + Lane 0 (positive)
4 CONFIG1
5 ML_Lane 0 - Lane 0 (negative)
6 CONFIG2
7,8 GND Ground
9 ML_Lane 1 + Lane 1 (positive)
10 ML_Lane 3 + Lane 3 (positive)
11 ML_Lane 1 - Lane 1 (negative)
12 ML_Lane 3 - Lane 3 (negative)
13,14 GND Ground
15 ML_Lane 2 + Lane 2 (positive)
16 AUX_CH+ Auxiliary Channel (positive)
17 ML_Lane 2 - Lane 2 (negative)
18 AUX_CH - Auxiliary Channel (negative)
19 GND Ground
20 DPPWR Power for connector
This is the pinout for the source-side connector; the sink-side connector pinout will have lanes 0–3 reversed in
order, i.e. lane 3 will be on pin 3 and 5 while lane 0 will be on pin 10 and 12.
With a passive adapter, the Mini DisplayPort can drive display devices with VGA, DVI, or HDMI interfaces.
Type C – Thunderbolt 3
Type C – USB 3.0
