VELOCITY TRANSDUCER
T1-40
CERTIFIED ACCORDING TO ATEX 94/9/CE DIRECTIVE
CERTIFIED SIL2 ACCORDING TO EN/IEC 61508
FUNCTION
The T1-40 transducer measures absolute vibration of any rotating machine support.
It supplies a voltage proportional to the vibration speed directly interfaceable with a device that can
process the signal (TR-V, TM1, TDSP).
GENERAL DESCRIPTION
The T1-40 electrodynamic transducer consists of a suspended plate coil immersed in the magnetic
field of a permanent magnet. It is fastened at the point to be tested and generates a signal
proportional to the vibration speed. It is used to monitor pumps, fans, motors and compressors
and is available in various versions in aluminium or stainless steel complete with MIL standard connector for electrical connection.
The transducer is available for the following classified area:
II 2GD Exia IIC T6/T5/T4 Ex iaD 21 T85/100/135°C ZONE 1
II 1GD Ex ia IIC T6/T5/T4 Ex iaD20 T85/100/135°C ZONE 0
The transducer is certified SIL2 for functional safety
TECHNICAL CHARACTERISTICS
• Body in anodised aluminium or AISI 316L stainless steel
Composition
• Connector
External connections • 5- or 7-pin MIL standard connector
• -40°C to +100°C (standard)
Operating temperature range • -40°C to +170°C (HT version)
• IP65
Type of measurement • Seismic (absolute vibration)
• T1-40/00 omnidirectional
Measurement direction • T1-40/BF horizontal
• T1-40/VO vertical
Measurement range • ± 1 mm
• T1-40/00 10-1000 Hz (Fig. 1)
Dynamic range • T1-40/BF 3-2000 Hz (Fig. 2)
• T1-40/VO 10-2000 Hz (Fig. 3)
• T1-40/00 12 Hz
Resonance frequency • T1-40/BF 4,5 Hz
• T1-40/VO 10 Hz
• T1-40/00 < 7%
Transverse sensitivity • T1-40/BF < 3%
• T1-40/VO < 3%
Output impedance • 1K Ω at 25°C
Retaining screw • M8 X 1,25
Weight • ~ 300 gr
ATEX ZONE 1 II 2GD Exia IIC T6/T5/T4 Ex iaD 21 T85/100/135°C (for T1-40/00)
Certifications available
ATEX ZONE 0 II 1GD Ex ia IIC T6/T5/T4 Ex iaD20 T85/100/135°C (for T1-40/00)
B A L A N C I N G M A C H I N E S
T1-40 DIMENSIONS T1-40/00
INFORMATION FOR THE ORDER:
A B C D E
T1-40/ / / / /
A: MEASUREMENT DIRECTION
00 omnidirectional
BF horizontal
VO vertical
B: TEMPERATURE RANGE
00 -40°C ÷ +100°C
HT -40° C ÷ +170°C (only for T1-40/00 and T1-40/
T1-40/BF
C: CERTIFICATION T1-40/VO
0 NONE
2 ATEX ZONA 1 II 2GD Ex ia IIC T6/T5/T4 Ex ia D21 T85/100/135°C
(only for T1-40/00)
8 ATEX ZONA 0 II 1GD Ex ia IIC T6/T5/T4 Ex ia D20 T85/100/135°C
(only for T1-40/00)
D: CASING
0 ALUMINIUM
1 STAINLESS STEEL (mandatory for zone 0)
E : FIXED CONNECTOR
0 ALUMINIUM
1 PLASTIC (mandatory for zone 0)
2 7 CONTACTS
FIG. 1 - T1-40/00 FIG. 2 - T1-40/BF FIG. 3 - T1-40/VO
ASTDB1220 01/16
CEMB S.p.A. Vibration analysis division:
Via Risorgimento, 9 phone +39 0341 706111 All the data and features mentioned in this catalogue are purely
23826 MANDELLO DEL LARIO (LC) Italy fax +39 0341 706299 for information and do not constitute any commitment on the part
of our company, which reserves the right to make any and all
www.cemb.com e-mail:
[email protected] alterations it may consider suitable without notice.
