4/6/23, 7:41 PM 900W Class-D Next Generation Power Amplifier - Class D Amplifier Circuit
Class D Amplifier Circuit 900w
AMPLIFIER CIRCUITS CLASS D AMPLIFIER CIRCUIT 900W
This class D amplifier circuit is based on IR2110 ic. The power output is up to 900w with
HiFi audio quality. The circuit diagram and PCB layout are available here.
https://solderingmind.com/class-d-amplifier-circuit-900w/ 1/5
4/6/23, 7:41 PM 900W Class-D Next Generation Power Amplifier - Class D Amplifier Circuit
https://solderingmind.com/class-d-amplifier-circuit-900w/ 2/5
4/6/23, 7:41 PM 900W Class-D Next Generation Power Amplifier - Class D Amplifier Circuit
This is a class D amplifier mono board, you can build these two mono board to make power
stereo class D amp. The stereo setup will give you up to 1800w power output. This circuit is
the best ever circuit who are loving class D amplifier. So, in this article, I’m going to explain
how to build an amplifier at home easily.
This class D amplifier design consist of three ic are TL071, CD4049, and IR2110. The
combinations of these components will produce high-quality audio outputs in the output stage.
900W Class D amplifier circuit diagram
Click on the circuit diagram to view in high resolution
Components required
TL071 IC – 1
CD4049 IC – 1
IR2110 IC – 1
10UF BIPOLAR CAPACITOR – 1
100K RESISTOR – 2
1N4148 DIODE – 5
2K2 RESISTOR – 1
1NF CAPACITOR – 3
1K RESISTOR – 2
10 OHMS RESISTOR – 6
100 NF CAPACITOR – 4
2N5401 TRANSISTOR – 1
330 UF CAPACITOR – 2
22OUF CAPACITOR – 1
4K7 RESISTOR – 3
8K2 2W RESISTOR – 2
100UF CAPACITOR – 3
5.6V ZENER DIODE – 2
12V ZENER DIODE – 1
MUR 120 DIODE – 2
MUR460 -1
220 PF CAPACITOR – 1
22UH INDUCTOR – 1
1K5 2W RESISTOR – 1
10r 2W RESISTOR – 1
680NF / 300V CAPACITOR – 1
The inductor coil using in this circuit
The inductor coil is the main part of this circuit diagram. So don’t ignore this part. Using the
correct value and correct inductance will give you the maximum peak of the output range. you
are using any kind of toroidal core. This concept is wrong because the inductor carries high
current so the inductor needs the high current capacity to work perfectly.
https://solderingmind.com/class-d-amplifier-circuit-900w/ 3/5
4/6/23, 7:41 PM 900W Class-D Next Generation Power Amplifier - Class D Amplifier Circuit
So I recommended you to you say a sendust toroidal Core. The toroidal core number is T106.
This kind of toroidal core can withstand high current and high temperature. The normal for its
core and the iron core will saturate fastly comparing with the SENDUST CORE.
The inductance is 22 micro Henry. The tents it is changing according to the type of toroidal
core or you are using so please use an LC meter to confirm the micro Henry is correct
D900 PCB layout
D900 PCB layout and components silkscreen
900w-class d amplifier PCB-layout
Download
D900-components
Download
900w-amp-silkscreen
Download
900w-amp-drilling-holes
Download
Power supply for class d audio amplifier
https://solderingmind.com/class-d-amplifier-circuit-900w/ 4/5
4/6/23, 7:41 PM 900W Class-D Next Generation Power Amplifier - Class D Amplifier Circuit
The power supply he is provided at least 70 to 90-volt dual power supply. I recommended to
do not use over-voltage, this will damage your components in the amplifier board.
Use the recommended voltage as per circuit diagram. Buying a transformer of 90-volt power
supply will cost you the highest amount. So in my suggestion use and SMPS with volt power
supply. The SMPS will reduce the space requirement of the amplifier.
Now a days the class the audio amplifier is getting more popular then other kinds of audio
amplifier systems because of the specification of this audio amplifier. The audio amplifier
board is very small as compared with the class A, Class A B, class B.
And the lowest price is the the important factor in class D audio amplifier. Low heat dissipation and
the space requirement is very low that is the advantage of this D class power audio amplifier.
https://solderingmind.com/class-d-amplifier-circuit-900w/ 5/5
